{"canonical":{"bases":[{"id":"minimum","name":"Minimum"},{"id":"reference","name":"Reference"},{"id":"specified_range","name":"Specified range"},{"id":"typical","name":"Typical"}],"conditions":[{"allowed_placement":"state_fixed_attribute","allowed_values":["H111","H112","O","T1","T4","T5","T6","T61","T63","T64","T651","T73"],"canonical_unit":null,"id":"temper","name":"Temper designation","value_type":"enum"},{"allowed_placement":"state_fixed_attribute","allowed_values":["annealed","normalized","solution_treated_aged","quenched_tempered_550","quenched_tempered_700","hardened_tempered","carburized_hardened_tempered"],"canonical_unit":null,"id":"heat_treatment","name":"Heat-treatment outcome","value_type":"enum"},{"allowed_placement":"state_fixed_attribute","allowed_values":["cold_drawn","cold_worked_20_percent","cold_worked_hard","cold_rolled","thermomechanically_rolled"],"canonical_unit":null,"id":"work_condition","name":"Mechanical or work condition","value_type":"enum"},{"allowed_placement":"state_fixed_attribute","allowed_values":["unfilled"],"canonical_unit":null,"id":"formulation","name":"Named formulation","value_type":"enum"},{"allowed_placement":"state_fixed_attribute","allowed_values":["glass_fiber","carbon_fiber"],"canonical_unit":null,"id":"reinforcement","name":"Reinforcement kind","value_type":"enum"},{"allowed_placement":"state_fixed_attribute","allowed_values":null,"canonical_unit":"1","id":"fiber_mass_fraction_1","name":"Nominal reinforcement mass fraction","value_type":"number"},{"allowed_placement":"state_fixed_attribute","allowed_values":["unidirectional","quasi_isotropic","woven_0_90"],"canonical_unit":null,"id":"layup","name":"Laminate layup class","value_type":"enum"},{"allowed_placement":"state_fixed_attribute","allowed_values":["dry_as_molded","conditioned"],"canonical_unit":null,"id":"conditioning_state","name":"Named conditioning state","value_type":"enum"},{"allowed_placement":"observation_condition","allowed_values":["plate","sheet","extrusion","bar","injection_molded","compression_molded","stock_shape","coil"],"canonical_unit":null,"id":"product_form","name":"Product form","navigable":true,"value_type":"enum"},{"allowed_placement":"observation_condition","allowed_values":null,"canonical_unit":"m","id":"thickness_m","name":"Product thickness","nullable_bounds":true,"value_type":"number_interval"},{"allowed_placement":"observation_condition","allowed_values":null,"canonical_unit":"m^2","id":"cross_sectional_area_m2","name":"Cross-sectional area","value_type":"number"},{"allowed_placement":"observation_condition","allowed_values":["L","LT","ST","in_plane","longitudinal","transverse","radial"],"canonical_unit":null,"id":"orientation","name":"Loading or measurement orientation","value_type":"enum"},{"allowed_placement":"observation_condition","allowed_values":null,"canonical_unit":"K","id":"temperature_K","name":"Test or service temperature","value_type":"number"},{"allowed_placement":"observation_condition","allowed_values":null,"canonical_unit":"1","id":"moisture_content_1","name":"Measured moisture content","value_type":"number"},{"allowed_placement":"observation_condition","allowed_values":null,"canonical_unit":"1","id":"fiber_volume_fraction_1","name":"Measured reinforcement volume fraction","value_type":"number"},{"allowed_placement":"state_fixed_attribute","allowed_values":["62 HRC","50 HRC","45 ± 1 HRC","60–61 HRC","44–46 HRC","44 HRC","48 HRC","52 HRC","45 HRC","240–270 HB","270 HB"],"canonical_unit":null,"id":"hardness_condition","name":"Hardness","value_type":"enum"}],"dataset":{"contract_version":"0.1.0","corpus_version":"1.0.0-rc.1","expected_counts":{"bases":4,"conditions":16,"materials":222,"observations":1593,"properties":10,"property_groups":1,"sources":28,"states":92,"taxa":40},"id":"materials-reference","synthetic":false,"warning":"Published reference values. Check source, basis and conditions for your application."},"materials":[{"aliases":["6061","AA6061","6061 aluminium","6061 aluminum","EN AW-6061","AlMg1SiCu"],"designations":[{"system_id":"aa","value":"6061"},{"system_id":"uns","value":"A96061"},{"system_id":"en","value":"EN AW-6061"}],"id":"al-6061","identity_kind":"standard_grade","name":"Aluminium 6061","notes":"Al-Mg-Si-Cu wrought alloy. The cited Hydro datasheet reports extrusion limits by temper and alloy-wide density.","primary_taxon_id":"aluminium-alloys","supplemental_taxon_ids":[]},{"aliases":["ABS","Acrylonitrile butadiene styrene","TECA RAN ABS grey"],"designations":[{"system_id":"supplier","value":"TECARAN ABS grey"},{"system_id":"polymer","value":"ABS"}],"id":"tecaran-abs-grey","identity_kind":"standard_grade","name":"TECARAN ABS grey","notes":"Ensinger ABS formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-abs","supplemental_taxon_ids":[]},{"aliases":["PPE","Polyphenylene ether","TECA NYL MT coloured"],"designations":[{"system_id":"supplier","value":"TECANYL MT coloured"},{"system_id":"polymer","value":"PPE"}],"id":"tecanyl-mt-coloured","identity_kind":"standard_grade","name":"TECANYL MT coloured","notes":"Ensinger PPE formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-ppe","supplemental_taxon_ids":[]},{"aliases":["PPE","Polyphenylene ether","TECA NYL GF30"],"designations":[{"system_id":"supplier","value":"TECANYL GF30"},{"system_id":"polymer","value":"PPE"}],"id":"tecanyl-gf30","identity_kind":"standard_grade","name":"TECANYL GF30","notes":"Ensinger PPE formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-ppe","supplemental_taxon_ids":[]},{"aliases":["PPE","Polyphenylene ether","TECA NYL 731 grey"],"designations":[{"system_id":"supplier","value":"TECANYL 731 grey"},{"system_id":"polymer","value":"PPE"}],"id":"tecanyl-731-grey","identity_kind":"standard_grade","name":"TECANYL 731 grey","notes":"Ensinger PPE formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-ppe","supplemental_taxon_ids":[]},{"aliases":["PMP","Polymethylpentene","TECA FINE PMP"],"designations":[{"system_id":"supplier","value":"TECAFINE PMP"},{"system_id":"polymer","value":"PMP"}],"id":"tecafine-pmp","identity_kind":"standard_grade","name":"TECAFINE PMP","notes":"Ensinger PMP formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pmp","supplemental_taxon_ids":[]},{"aliases":["PP","Polypropylene","TECA PRO MT"],"designations":[{"system_id":"supplier","value":"TECAPRO MT"},{"system_id":"polymer","value":"PP"}],"id":"tecapro-mt","identity_kind":"standard_grade","name":"TECAPRO MT","notes":"Ensinger PP formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pp","supplemental_taxon_ids":[]},{"aliases":["POM-C","Acetal copolymer","TECA FORM AH natural","POM","acetal","polyoxymethylene"],"designations":[{"system_id":"supplier","value":"TECAFORM AH natural"},{"system_id":"polymer","value":"POM-C"}],"id":"tecaform-ah-natural","identity_kind":"standard_grade","name":"TECAFORM AH natural","notes":"Ensinger POM-C formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pom-c","supplemental_taxon_ids":[]},{"aliases":["POM-C","Acetal copolymer","TECA FORM AH GF25","POM","acetal","polyoxymethylene"],"designations":[{"system_id":"supplier","value":"TECAFORM AH GF25"},{"system_id":"polymer","value":"POM-C"}],"id":"tecaform-ah-gf25","identity_kind":"standard_grade","name":"TECAFORM AH GF25","notes":"Ensinger POM-C formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pom-c","supplemental_taxon_ids":[]},{"aliases":["POM-C","Acetal copolymer","TECA FORM AH ELS","POM","acetal","polyoxymethylene"],"designations":[{"system_id":"supplier","value":"TECAFORM AH ELS"},{"system_id":"polymer","value":"POM-C"}],"id":"tecaform-ah-els","identity_kind":"standard_grade","name":"TECAFORM AH ELS","notes":"Ensinger POM-C formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pom-c","supplemental_taxon_ids":[]},{"aliases":["POM-C","Acetal copolymer","TECA FORM AH SD","POM","acetal","polyoxymethylene"],"designations":[{"system_id":"supplier","value":"TECAFORM AH SD"},{"system_id":"polymer","value":"POM-C"}],"id":"tecaform-ah-sd","identity_kind":"standard_grade","name":"TECAFORM AH SD","notes":"Ensinger POM-C formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pom-c","supplemental_taxon_ids":[]},{"aliases":["POM-C","Acetal copolymer","TECA FORM AH ID blue","POM","acetal","polyoxymethylene"],"designations":[{"system_id":"supplier","value":"TECAFORM AH ID blue"},{"system_id":"polymer","value":"POM-C"}],"id":"tecaform-ah-id-blue","identity_kind":"standard_grade","name":"TECAFORM AH ID blue","notes":"Ensinger POM-C formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pom-c","supplemental_taxon_ids":[]},{"aliases":["POM-C","Acetal copolymer","TECA FORM AH LA","POM","acetal","polyoxymethylene"],"designations":[{"system_id":"supplier","value":"TECAFORM AH LA"},{"system_id":"polymer","value":"POM-C"}],"id":"tecaform-ah-la","identity_kind":"standard_grade","name":"TECAFORM AH LA","notes":"Ensinger POM-C formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pom-c","supplemental_taxon_ids":[]},{"aliases":["POM-C","Acetal copolymer","TECA FORM AH SAN","POM","acetal","polyoxymethylene"],"designations":[{"system_id":"supplier","value":"TECAFORM AH SAN"},{"system_id":"polymer","value":"POM-C"}],"id":"tecaform-ah-san","identity_kind":"standard_grade","name":"TECAFORM AH SAN","notes":"Ensinger POM-C formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pom-c","supplemental_taxon_ids":[]},{"aliases":["POM-C","Acetal copolymer","TECA FORM AH MT coloured","POM","acetal","polyoxymethylene"],"designations":[{"system_id":"supplier","value":"TECAFORM AH MT coloured"},{"system_id":"polymer","value":"POM-C"}],"id":"tecaform-ah-mt-coloured","identity_kind":"standard_grade","name":"TECAFORM AH MT coloured","notes":"Ensinger POM-C formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pom-c","supplemental_taxon_ids":[]},{"aliases":["POM-H","Acetal homopolymer","TECA FORM AD","POM","acetal","polyoxymethylene"],"designations":[{"system_id":"supplier","value":"TECAFORM AD"},{"system_id":"polymer","value":"POM-H"}],"id":"tecaform-ad","identity_kind":"standard_grade","name":"TECAFORM AD","notes":"Ensinger POM-H formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pom-h","supplemental_taxon_ids":[]},{"aliases":["POM-H","Acetal homopolymer","TECA FORM AD AF","POM","acetal","polyoxymethylene"],"designations":[{"system_id":"supplier","value":"TECAFORM AD AF"},{"system_id":"polymer","value":"POM-H"}],"id":"tecaform-ad-af","identity_kind":"standard_grade","name":"TECAFORM AD AF","notes":"Ensinger POM-H formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pom-h","supplemental_taxon_ids":[]},{"aliases":["PA6","Nylon 6","TECA ST T","nylon","polyamide"],"designations":[{"system_id":"supplier","value":"TECAST T"},{"system_id":"polymer","value":"PA6"}],"id":"tecast-t","identity_kind":"standard_grade","name":"TECAST T","notes":"Ensinger PA6 formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pa6","supplemental_taxon_ids":[]},{"aliases":["PA6","Nylon 6","TECA ST TM","nylon","polyamide"],"designations":[{"system_id":"supplier","value":"TECAST TM"},{"system_id":"polymer","value":"PA6"}],"id":"tecast-tm","identity_kind":"standard_grade","name":"TECAST TM","notes":"Ensinger PA6 formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pa6","supplemental_taxon_ids":[]},{"aliases":["PA6","Nylon 6","TECA ST L black","nylon","polyamide"],"designations":[{"system_id":"supplier","value":"TECAST L black"},{"system_id":"polymer","value":"PA6"}],"id":"tecast-l-black","identity_kind":"standard_grade","name":"TECAST L black","notes":"Ensinger PA6 formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pa6","supplemental_taxon_ids":[]},{"aliases":["PA6","Nylon 6","TECA GLIDE green","nylon","polyamide"],"designations":[{"system_id":"supplier","value":"TECAGLIDE green"},{"system_id":"polymer","value":"PA6"}],"id":"tecaglide-green","identity_kind":"standard_grade","name":"TECAGLIDE green","notes":"Ensinger PA6 formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pa6","supplemental_taxon_ids":[]},{"aliases":["PA6","Nylon 6","TECA RIM 1500 yellow","nylon","polyamide"],"designations":[{"system_id":"supplier","value":"TECARIM 1500 yellow"},{"system_id":"polymer","value":"PA6"}],"id":"tecarim-1500-yellow","identity_kind":"standard_grade","name":"TECARIM 1500 yellow","notes":"Ensinger PA6 formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pa6","supplemental_taxon_ids":[]},{"aliases":["PA6","Nylon 6","TECA MID 6","nylon","polyamide"],"designations":[{"system_id":"supplier","value":"TECAMID 6"},{"system_id":"polymer","value":"PA6"}],"id":"tecamid-6","identity_kind":"standard_grade","name":"TECAMID 6","notes":"Ensinger PA6 formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pa6","supplemental_taxon_ids":[]},{"aliases":["PA6","Nylon 6","TECA M 6 MO black","nylon","polyamide"],"designations":[{"system_id":"supplier","value":"TECAM 6 MO black"},{"system_id":"polymer","value":"PA6"}],"id":"tecam-6-mo-black","identity_kind":"standard_grade","name":"TECAM 6 MO black","notes":"Ensinger PA6 formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pa6","supplemental_taxon_ids":[]},{"aliases":["PA6","Nylon 6","TECA MID 6 GF25","nylon","polyamide"],"designations":[{"system_id":"supplier","value":"TECAMID 6 GF25"},{"system_id":"polymer","value":"PA6"}],"id":"tecamid-6-gf25","identity_kind":"standard_grade","name":"TECAMID 6 GF25","notes":"Ensinger PA6 formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pa6","supplemental_taxon_ids":[]},{"aliases":["PA6","Nylon 6","TECA MID 6 GF30 black","nylon","polyamide"],"designations":[{"system_id":"supplier","value":"TECAMID 6 GF30 black"},{"system_id":"polymer","value":"PA6"}],"id":"tecamid-6-gf30-black","identity_kind":"standard_grade","name":"TECAMID 6 GF30 black","notes":"Ensinger PA6 formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pa6","supplemental_taxon_ids":[]},{"aliases":["PA66","Nylon 66","TECA MID 66","nylon","polyamide"],"designations":[{"system_id":"supplier","value":"TECAMID 66"},{"system_id":"polymer","value":"PA66"}],"id":"tecamid-66","identity_kind":"standard_grade","name":"TECAMID 66","notes":"Ensinger PA66 formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pa66","supplemental_taxon_ids":[]},{"aliases":["PA66","Nylon 66","TECA MID 66 MH","nylon","polyamide"],"designations":[{"system_id":"supplier","value":"TECAMID 66 MH"},{"system_id":"polymer","value":"PA66"}],"id":"tecamid-66-mh","identity_kind":"standard_grade","name":"TECAMID 66 MH","notes":"Ensinger PA66 formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pa66","supplemental_taxon_ids":[]},{"aliases":["PA66","Nylon 66","TECA MID 66 GF30 black","nylon","polyamide"],"designations":[{"system_id":"supplier","value":"TECAMID 66 GF30 black"},{"system_id":"polymer","value":"PA66"}],"id":"tecamid-66-gf30-black","identity_kind":"standard_grade","name":"TECAMID 66 GF30 black","notes":"Ensinger PA66 formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pa66","supplemental_taxon_ids":[]},{"aliases":["PA66","Nylon 66","TECA MID 66 CF20 black","nylon","polyamide"],"designations":[{"system_id":"supplier","value":"TECAMID 66 CF20 black"},{"system_id":"polymer","value":"PA66"}],"id":"tecamid-66-cf20-black","identity_kind":"standard_grade","name":"TECAMID 66 CF20 black","notes":"Ensinger PA66 formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pa66","supplemental_taxon_ids":[]},{"aliases":["PA66","Nylon 66","TECA MID 66 HI","nylon","polyamide"],"designations":[{"system_id":"supplier","value":"TECAMID 66 HI"},{"system_id":"polymer","value":"PA66"}],"id":"tecamid-66-hi","identity_kind":"standard_grade","name":"TECAMID 66 HI","notes":"Ensinger PA66 formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pa66","supplemental_taxon_ids":[]},{"aliases":["PA66","Nylon 66","TECA MID 66 LA","nylon","polyamide"],"designations":[{"system_id":"supplier","value":"TECAMID 66 LA"},{"system_id":"polymer","value":"PA66"}],"id":"tecamid-66-la","identity_kind":"standard_grade","name":"TECAMID 66 LA","notes":"Ensinger PA66 formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pa66","supplemental_taxon_ids":[]},{"aliases":["PA66","Nylon 66","TECA MID 66/X GF50","nylon","polyamide"],"designations":[{"system_id":"supplier","value":"TECAMID 66/X GF50"},{"system_id":"polymer","value":"PA66"}],"id":"tecamid-66-x-gf50","identity_kind":"standard_grade","name":"TECAMID 66/X GF50","notes":"Ensinger PA66 formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pa66","supplemental_taxon_ids":[]},{"aliases":["PA46","Nylon 46","TECA MID 46 redbrown","nylon","polyamide"],"designations":[{"system_id":"supplier","value":"TECAMID 46 redbrown"},{"system_id":"polymer","value":"PA46"}],"id":"tecamid-46-redbrown","identity_kind":"standard_grade","name":"TECAMID 46 redbrown","notes":"Ensinger PA46 formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pa46","supplemental_taxon_ids":[]},{"aliases":["PA12","Nylon 12","TECA MID 12","nylon","polyamide"],"designations":[{"system_id":"supplier","value":"TECAMID 12"},{"system_id":"polymer","value":"PA12"}],"id":"tecamid-12","identity_kind":"standard_grade","name":"TECAMID 12","notes":"Ensinger PA12 formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pa12","supplemental_taxon_ids":[]},{"aliases":["PET","Polyethylene terephthalate","TECA PET"],"designations":[{"system_id":"supplier","value":"TECAPET"},{"system_id":"polymer","value":"PET"}],"id":"tecapet","identity_kind":"standard_grade","name":"TECAPET","notes":"Ensinger PET formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pet","supplemental_taxon_ids":[]},{"aliases":["PET","Polyethylene terephthalate","TECA PET TF"],"designations":[{"system_id":"supplier","value":"TECAPET TF"},{"system_id":"polymer","value":"PET"}],"id":"tecapet-tf","identity_kind":"standard_grade","name":"TECAPET TF","notes":"Ensinger PET formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pet","supplemental_taxon_ids":[]},{"aliases":["PET","Polyethylene terephthalate","TECA DUR PET"],"designations":[{"system_id":"supplier","value":"TECADUR PET"},{"system_id":"polymer","value":"PET"}],"id":"tecadur-pet","identity_kind":"standard_grade","name":"TECADUR PET","notes":"Ensinger PET formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pet","supplemental_taxon_ids":[]},{"aliases":["PBT","Polybutylene terephthalate","TECA DUR PBT GF30"],"designations":[{"system_id":"supplier","value":"TECADUR PBT GF30"},{"system_id":"polymer","value":"PBT"}],"id":"tecadur-pbt-gf30","identity_kind":"standard_grade","name":"TECADUR PBT GF30","notes":"Ensinger PBT formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pbt","supplemental_taxon_ids":[]},{"aliases":["PC","Polycarbonate","TECA NAT"],"designations":[{"system_id":"supplier","value":"TECANAT"},{"system_id":"polymer","value":"PC"}],"id":"tecanat","identity_kind":"standard_grade","name":"TECANAT","notes":"Ensinger PC formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pc","supplemental_taxon_ids":[]},{"aliases":["PC","Polycarbonate","TECA NAT GF30"],"designations":[{"system_id":"supplier","value":"TECANAT GF30"},{"system_id":"polymer","value":"PC"}],"id":"tecanat-gf30","identity_kind":"standard_grade","name":"TECANAT GF30","notes":"Ensinger PC formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pc","supplemental_taxon_ids":[]},{"aliases":["PVDF","Polyvinylidene fluoride","TECA FLON PVDF"],"designations":[{"system_id":"supplier","value":"TECAFLON PVDF"},{"system_id":"polymer","value":"PVDF"}],"id":"tecaflon-pvdf","identity_kind":"standard_grade","name":"TECAFLON PVDF","notes":"Ensinger PVDF formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pvdf","supplemental_taxon_ids":[]},{"aliases":["PSU","Polysulfone","TECA SON S"],"designations":[{"system_id":"supplier","value":"TECASON S"},{"system_id":"polymer","value":"PSU"}],"id":"tecason-s","identity_kind":"standard_grade","name":"TECASON S","notes":"Ensinger PSU formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-psu","supplemental_taxon_ids":[]},{"aliases":["PEI","Polyetherimide","TECA PEI"],"designations":[{"system_id":"supplier","value":"TECAPEI"},{"system_id":"polymer","value":"PEI"}],"id":"tecapei","identity_kind":"standard_grade","name":"TECAPEI","notes":"Ensinger PEI formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pei","supplemental_taxon_ids":[]},{"aliases":["PPSU","Polyphenylsulfone","TECA SON P"],"designations":[{"system_id":"supplier","value":"TECASON P"},{"system_id":"polymer","value":"PPSU"}],"id":"tecason-p","identity_kind":"standard_grade","name":"TECASON P","notes":"Ensinger PPSU formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-ppsu","supplemental_taxon_ids":[]},{"aliases":["PPSU","Polyphenylsulfone","TECA SON P MT coloured"],"designations":[{"system_id":"supplier","value":"TECASON P MT coloured"},{"system_id":"polymer","value":"PPSU"}],"id":"tecason-p-mt-coloured","identity_kind":"standard_grade","name":"TECASON P MT coloured","notes":"Ensinger PPSU formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-ppsu","supplemental_taxon_ids":[]},{"aliases":["PPS","Polyphenylene sulfide","TECA TRON"],"designations":[{"system_id":"supplier","value":"TECATRON"},{"system_id":"polymer","value":"PPS"}],"id":"tecatron","identity_kind":"standard_grade","name":"TECATRON","notes":"Ensinger PPS formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pps","supplemental_taxon_ids":[]},{"aliases":["PPS","Polyphenylene sulfide","TECA TRON GF40"],"designations":[{"system_id":"supplier","value":"TECATRON GF40"},{"system_id":"polymer","value":"PPS"}],"id":"tecatron-gf40","identity_kind":"standard_grade","name":"TECATRON GF40","notes":"Ensinger PPS formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pps","supplemental_taxon_ids":[]},{"aliases":["PPS","Polyphenylene sulfide","TECA TRON PVX"],"designations":[{"system_id":"supplier","value":"TECATRON PVX"},{"system_id":"polymer","value":"PPS"}],"id":"tecatron-pvx","identity_kind":"standard_grade","name":"TECATRON PVX","notes":"Ensinger PPS formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pps","supplemental_taxon_ids":[]},{"aliases":["PEEK","Polyether ether ketone","TECA PEEK"],"designations":[{"system_id":"supplier","value":"TECAPEEK"},{"system_id":"polymer","value":"PEEK"}],"id":"tecapeek","identity_kind":"standard_grade","name":"TECAPEEK","notes":"Ensinger PEEK formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-peek","supplemental_taxon_ids":[]},{"aliases":["PEEK","Polyether ether ketone","TECA PEEK GF30"],"designations":[{"system_id":"supplier","value":"TECAPEEK GF30"},{"system_id":"polymer","value":"PEEK"}],"id":"tecapeek-gf30","identity_kind":"standard_grade","name":"TECAPEEK GF30","notes":"Ensinger PEEK formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-peek","supplemental_taxon_ids":[]},{"aliases":["PEEK","Polyether ether ketone","TECA PEEK CF30"],"designations":[{"system_id":"supplier","value":"TECAPEEK CF30"},{"system_id":"polymer","value":"PEEK"}],"id":"tecapeek-cf30","identity_kind":"standard_grade","name":"TECAPEEK CF30","notes":"Ensinger PEEK formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-peek","supplemental_taxon_ids":[]},{"aliases":["PEEK","Polyether ether ketone","TECA PEEK PVX"],"designations":[{"system_id":"supplier","value":"TECAPEEK PVX"},{"system_id":"polymer","value":"PEEK"}],"id":"tecapeek-pvx","identity_kind":"standard_grade","name":"TECAPEEK PVX","notes":"Ensinger PEEK formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-peek","supplemental_taxon_ids":[]},{"aliases":["PEEK","Polyether ether ketone","TECA PEEK ELS nano"],"designations":[{"system_id":"supplier","value":"TECAPEEK ELS nano"},{"system_id":"polymer","value":"PEEK"}],"id":"tecapeek-els-nano","identity_kind":"standard_grade","name":"TECAPEEK ELS nano","notes":"Ensinger PEEK formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-peek","supplemental_taxon_ids":[]},{"aliases":["PEEK","Polyether ether ketone","TECA PEEK TF10"],"designations":[{"system_id":"supplier","value":"TECAPEEK TF10"},{"system_id":"polymer","value":"PEEK"}],"id":"tecapeek-tf10","identity_kind":"standard_grade","name":"TECAPEEK TF10","notes":"Ensinger PEEK formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-peek","supplemental_taxon_ids":[]},{"aliases":["PEEK","Polyether ether ketone","TECA PEEK ID blue"],"designations":[{"system_id":"supplier","value":"TECAPEEK ID blue"},{"system_id":"polymer","value":"PEEK"}],"id":"tecapeek-id-blue","identity_kind":"standard_grade","name":"TECAPEEK ID blue","notes":"Ensinger PEEK formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-peek","supplemental_taxon_ids":[]},{"aliases":["PEEK","Polyether ether ketone","TECA PEEK MT"],"designations":[{"system_id":"supplier","value":"TECAPEEK MT"},{"system_id":"polymer","value":"PEEK"}],"id":"tecapeek-mt","identity_kind":"standard_grade","name":"TECAPEEK MT","notes":"Ensinger PEEK formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-peek","supplemental_taxon_ids":[]},{"aliases":["PEEK","Polyether ether ketone","TECA PEEK CF30 MT"],"designations":[{"system_id":"supplier","value":"TECAPEEK CF30 MT"},{"system_id":"polymer","value":"PEEK"}],"id":"tecapeek-cf30-mt","identity_kind":"standard_grade","name":"TECAPEEK CF30 MT","notes":"Ensinger PEEK formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-peek","supplemental_taxon_ids":[]},{"aliases":["PEEK","Polyether ether ketone","TECA PEEK CLASSIX white"],"designations":[{"system_id":"supplier","value":"TECAPEEK CLASSIX white"},{"system_id":"polymer","value":"PEEK"}],"id":"tecapeek-classix-white","identity_kind":"standard_grade","name":"TECAPEEK CLASSIX white","notes":"Ensinger PEEK formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-peek","supplemental_taxon_ids":[]},{"aliases":["PEEK","Polyether ether ketone","TECA PEEK TS"],"designations":[{"system_id":"supplier","value":"TECAPEEK TS"},{"system_id":"polymer","value":"PEEK"}],"id":"tecapeek-ts","identity_kind":"standard_grade","name":"TECAPEEK TS","notes":"Ensinger PEEK formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-peek","supplemental_taxon_ids":[]},{"aliases":["PEEK","Polyether ether ketone","TECA PEEK CMF"],"designations":[{"system_id":"supplier","value":"TECAPEEK CMF"},{"system_id":"polymer","value":"PEEK"}],"id":"tecapeek-cmf","identity_kind":"standard_grade","name":"TECAPEEK CMF","notes":"Ensinger PEEK formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-peek","supplemental_taxon_ids":[]},{"aliases":["PEK","Polyetherketone","TECA PEEK HT black"],"designations":[{"system_id":"supplier","value":"TECAPEEK HT black"},{"system_id":"polymer","value":"PEK"}],"id":"tecapeek-ht-black","identity_kind":"standard_grade","name":"TECAPEEK HT black","notes":"Ensinger PEK formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pek","supplemental_taxon_ids":[]},{"aliases":["PEKEKK","Polyetherketoneetherketoneketone","TECA PEEK ST black"],"designations":[{"system_id":"supplier","value":"TECAPEEK ST black"},{"system_id":"polymer","value":"PEKEKK"}],"id":"tecapeek-st-black","identity_kind":"standard_grade","name":"TECAPEEK ST black","notes":"Ensinger PEKEKK formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pekekk","supplemental_taxon_ids":[]},{"aliases":["PEEK","Polyether ether ketone","TECA TEC PEEK CW50"],"designations":[{"system_id":"supplier","value":"TECATEC PEEK CW50"},{"system_id":"polymer","value":"PEEK"}],"id":"tecatec-peek-cw50","identity_kind":"standard_grade","name":"TECATEC PEEK CW50","notes":"Ensinger PEEK formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-peek","supplemental_taxon_ids":[]},{"aliases":["PEKK","Polyetherketoneketone","TECA TEC PEKK CW60"],"designations":[{"system_id":"supplier","value":"TECATEC PEKK CW60"},{"system_id":"polymer","value":"PEKK"}],"id":"tecatec-pekk-cw60","identity_kind":"standard_grade","name":"TECATEC PEKK CW60","notes":"Ensinger PEKK formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pekk","supplemental_taxon_ids":[]},{"aliases":["PAI","Polyamide-imide","TECA TOR 5013"],"designations":[{"system_id":"supplier","value":"TECATOR 5013"},{"system_id":"polymer","value":"PAI"}],"id":"tecator-5013","identity_kind":"standard_grade","name":"TECATOR 5013","notes":"Ensinger PAI formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pai","supplemental_taxon_ids":[]},{"aliases":["PAI","Polyamide-imide","TECA TOR 5031 PVX"],"designations":[{"system_id":"supplier","value":"TECATOR 5031 PVX"},{"system_id":"polymer","value":"PAI"}],"id":"tecator-5031-pvx","identity_kind":"standard_grade","name":"TECATOR 5031 PVX","notes":"Ensinger PAI formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pai","supplemental_taxon_ids":[]},{"aliases":["PI","Polyimide","TECA SINT 1011"],"designations":[{"system_id":"supplier","value":"TECASINT 1011"},{"system_id":"polymer","value":"PI"}],"id":"tecasint-1011","identity_kind":"standard_grade","name":"TECASINT 1011","notes":"Ensinger PI formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pi","supplemental_taxon_ids":[]},{"aliases":["PI","Polyimide","TECA SINT 1021"],"designations":[{"system_id":"supplier","value":"TECASINT 1021"},{"system_id":"polymer","value":"PI"}],"id":"tecasint-1021","identity_kind":"standard_grade","name":"TECASINT 1021","notes":"Ensinger PI formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pi","supplemental_taxon_ids":[]},{"aliases":["PI","Polyimide","TECA SINT 1031"],"designations":[{"system_id":"supplier","value":"TECASINT 1031"},{"system_id":"polymer","value":"PI"}],"id":"tecasint-1031","identity_kind":"standard_grade","name":"TECASINT 1031","notes":"Ensinger PI formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pi","supplemental_taxon_ids":[]},{"aliases":["PI","Polyimide","TECA SINT 1041"],"designations":[{"system_id":"supplier","value":"TECASINT 1041"},{"system_id":"polymer","value":"PI"}],"id":"tecasint-1041","identity_kind":"standard_grade","name":"TECASINT 1041","notes":"Ensinger PI formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pi","supplemental_taxon_ids":[]},{"aliases":["PI","Polyimide","TECA SINT 1061"],"designations":[{"system_id":"supplier","value":"TECASINT 1061"},{"system_id":"polymer","value":"PI"}],"id":"tecasint-1061","identity_kind":"standard_grade","name":"TECASINT 1061","notes":"Ensinger PI formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pi","supplemental_taxon_ids":[]},{"aliases":["PI","Polyimide","TECA SINT 1101"],"designations":[{"system_id":"supplier","value":"TECASINT 1101"},{"system_id":"polymer","value":"PI"}],"id":"tecasint-1101","identity_kind":"standard_grade","name":"TECASINT 1101","notes":"Ensinger PI formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pi","supplemental_taxon_ids":[]},{"aliases":["PI","Polyimide","TECA SINT 1611"],"designations":[{"system_id":"supplier","value":"TECASINT 1611"},{"system_id":"polymer","value":"PI"}],"id":"tecasint-1611","identity_kind":"standard_grade","name":"TECASINT 1611","notes":"Ensinger PI formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pi","supplemental_taxon_ids":[]},{"aliases":["PI","Polyimide","TECA SINT 2011"],"designations":[{"system_id":"supplier","value":"TECASINT 2011"},{"system_id":"polymer","value":"PI"}],"id":"tecasint-2011","identity_kind":"standard_grade","name":"TECASINT 2011","notes":"Ensinger PI formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pi","supplemental_taxon_ids":[]},{"aliases":["PI","Polyimide","TECA SINT 2021"],"designations":[{"system_id":"supplier","value":"TECASINT 2021"},{"system_id":"polymer","value":"PI"}],"id":"tecasint-2021","identity_kind":"standard_grade","name":"TECASINT 2021","notes":"Ensinger PI formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pi","supplemental_taxon_ids":[]},{"aliases":["PI","Polyimide","TECA SINT 2031"],"designations":[{"system_id":"supplier","value":"TECASINT 2031"},{"system_id":"polymer","value":"PI"}],"id":"tecasint-2031","identity_kind":"standard_grade","name":"TECASINT 2031","notes":"Ensinger PI formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pi","supplemental_taxon_ids":[]},{"aliases":["PI","Polyimide","TECA SINT 2391"],"designations":[{"system_id":"supplier","value":"TECASINT 2391"},{"system_id":"polymer","value":"PI"}],"id":"tecasint-2391","identity_kind":"standard_grade","name":"TECASINT 2391","notes":"Ensinger PI formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pi","supplemental_taxon_ids":[]},{"aliases":["PI","Polyimide","TECA SINT 4011"],"designations":[{"system_id":"supplier","value":"TECASINT 4011"},{"system_id":"polymer","value":"PI"}],"id":"tecasint-4011","identity_kind":"standard_grade","name":"TECASINT 4011","notes":"Ensinger PI formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pi","supplemental_taxon_ids":[]},{"aliases":["PI","Polyimide","TECA SINT 4021"],"designations":[{"system_id":"supplier","value":"TECASINT 4021"},{"system_id":"polymer","value":"PI"}],"id":"tecasint-4021","identity_kind":"standard_grade","name":"TECASINT 4021","notes":"Ensinger PI formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pi","supplemental_taxon_ids":[]},{"aliases":["PI","Polyimide","TECA SINT 4111"],"designations":[{"system_id":"supplier","value":"TECASINT 4111"},{"system_id":"polymer","value":"PI"}],"id":"tecasint-4111","identity_kind":"standard_grade","name":"TECASINT 4111","notes":"Ensinger PI formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pi","supplemental_taxon_ids":[]},{"aliases":["PI","Polyimide","TECA SINT 4121"],"designations":[{"system_id":"supplier","value":"TECASINT 4121"},{"system_id":"polymer","value":"PI"}],"id":"tecasint-4121","identity_kind":"standard_grade","name":"TECASINT 4121","notes":"Ensinger PI formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pi","supplemental_taxon_ids":[]},{"aliases":["PAI","Polyamide-imide","TECA SINT 5051"],"designations":[{"system_id":"supplier","value":"TECASINT 5051"},{"system_id":"polymer","value":"PAI"}],"id":"tecasint-5051","identity_kind":"standard_grade","name":"TECASINT 5051","notes":"Ensinger PAI formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pai","supplemental_taxon_ids":[]},{"aliases":["PAI","Polyamide-imide","TECA SINT 5201 SD"],"designations":[{"system_id":"supplier","value":"TECASINT 5201 SD"},{"system_id":"polymer","value":"PAI"}],"id":"tecasint-5201-sd","identity_kind":"standard_grade","name":"TECASINT 5201 SD","notes":"Ensinger PAI formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-pai","supplemental_taxon_ids":[]},{"aliases":["PTFE","Polytetrafluoroethylene","TECA SINT 8001"],"designations":[{"system_id":"supplier","value":"TECASINT 8001"},{"system_id":"polymer","value":"PTFE"}],"id":"tecasint-8001","identity_kind":"standard_grade","name":"TECASINT 8001","notes":"Ensinger PTFE formulation. Published stock-shape reference data for this named product.","primary_taxon_id":"polymer-ptfe","supplemental_taxon_ids":[]},{"aliases":["Porcelain","silicate"],"designations":[{"system_id":"supplier","value":"Porcelain"}],"id":"coorstek-porcelain","identity_kind":"commercial_grade","name":"CoorsTek Porcelain","notes":"CoorsTek silicate material with supplier-reported typical properties.","primary_taxon_id":"ceramics","supplemental_taxon_ids":[]},{"aliases":["Steatite","silicate"],"designations":[{"system_id":"supplier","value":"Steatite"}],"id":"coorstek-steatite","identity_kind":"commercial_grade","name":"CoorsTek Steatite","notes":"CoorsTek silicate material with supplier-reported typical properties.","primary_taxon_id":"ceramics","supplemental_taxon_ids":[]},{"aliases":["Cordierite","silicate"],"designations":[{"system_id":"supplier","value":"Cordierite"}],"id":"coorstek-cordierite","identity_kind":"commercial_grade","name":"CoorsTek Cordierite","notes":"CoorsTek silicate material with supplier-reported typical properties.","primary_taxon_id":"ceramics","supplemental_taxon_ids":[]},{"aliases":["Mullite","silicate"],"designations":[{"system_id":"supplier","value":"Mullite"}],"id":"coorstek-mullite","identity_kind":"commercial_grade","name":"CoorsTek Mullite","notes":"CoorsTek silicate material with supplier-reported typical properties.","primary_taxon_id":"ceramics","supplemental_taxon_ids":[]},{"aliases":["AD-85","alumina"],"designations":[{"system_id":"supplier","value":"AD-85"}],"id":"coorstek-ad-85","identity_kind":"commercial_grade","name":"CoorsTek AD-85","notes":"CoorsTek alumina material with supplier-reported typical properties.","primary_taxon_id":"ceramics","supplemental_taxon_ids":[]},{"aliases":["AD-90","alumina"],"designations":[{"system_id":"supplier","value":"AD-90"}],"id":"coorstek-ad-90","identity_kind":"commercial_grade","name":"CoorsTek AD-90","notes":"CoorsTek alumina material with supplier-reported typical properties.","primary_taxon_id":"ceramics","supplemental_taxon_ids":[]},{"aliases":["AD-94","alumina"],"designations":[{"system_id":"supplier","value":"AD-94"}],"id":"coorstek-ad-94","identity_kind":"commercial_grade","name":"CoorsTek AD-94","notes":"CoorsTek alumina material with supplier-reported typical properties.","primary_taxon_id":"ceramics","supplemental_taxon_ids":[]},{"aliases":["AD-96","alumina"],"designations":[{"system_id":"supplier","value":"AD-96"}],"id":"coorstek-ad-96","identity_kind":"commercial_grade","name":"CoorsTek AD-96","notes":"CoorsTek alumina material with supplier-reported typical properties.","primary_taxon_id":"ceramics","supplemental_taxon_ids":[]},{"aliases":["FG-995","alumina"],"designations":[{"system_id":"supplier","value":"FG-995"}],"id":"coorstek-fg-995","identity_kind":"commercial_grade","name":"CoorsTek FG-995","notes":"CoorsTek alumina material with supplier-reported typical properties.","primary_taxon_id":"ceramics","supplemental_taxon_ids":[]},{"aliases":["AD-995","alumina"],"designations":[{"system_id":"supplier","value":"AD-995"}],"id":"coorstek-ad-995","identity_kind":"commercial_grade","name":"CoorsTek AD-995","notes":"CoorsTek alumina material with supplier-reported typical properties.","primary_taxon_id":"ceramics","supplemental_taxon_ids":[]},{"aliases":["PlasmaPure AD-998","alumina"],"designations":[{"system_id":"supplier","value":"PlasmaPure AD-998"}],"id":"coorstek-plasmapure-ad-998","identity_kind":"commercial_grade","name":"CoorsTek PlasmaPure AD-998","notes":"CoorsTek alumina material with supplier-reported typical properties.","primary_taxon_id":"ceramics","supplemental_taxon_ids":[]},{"aliases":["PlasmaPure-UC","alumina"],"designations":[{"system_id":"supplier","value":"PlasmaPure-UC"}],"id":"coorstek-plasmapure-uc","identity_kind":"commercial_grade","name":"CoorsTek PlasmaPure-UC","notes":"CoorsTek alumina material with supplier-reported typical properties.","primary_taxon_id":"ceramics","supplemental_taxon_ids":[]},{"aliases":["ESD Alumina","alumina"],"designations":[{"system_id":"supplier","value":"ESD Alumina"}],"id":"coorstek-esd-alumina","identity_kind":"commercial_grade","name":"CoorsTek ESD Alumina","notes":"CoorsTek alumina material with supplier-reported typical properties.","primary_taxon_id":"ceramics","supplemental_taxon_ids":[]},{"aliases":["ZTA 10%","alumina"],"designations":[{"system_id":"supplier","value":"ZTA 10%"}],"id":"coorstek-zta-10","identity_kind":"commercial_grade","name":"CoorsTek ZTA 10%","notes":"CoorsTek alumina material with supplier-reported typical properties.","primary_taxon_id":"ceramics","supplemental_taxon_ids":[]},{"aliases":["Dura-Z TTZ","zirconia"],"designations":[{"system_id":"supplier","value":"Dura-Z TTZ"}],"id":"coorstek-dura-z-ttz","identity_kind":"commercial_grade","name":"CoorsTek Dura-Z TTZ","notes":"CoorsTek zirconia material with supplier-reported typical properties.","primary_taxon_id":"ceramics","supplemental_taxon_ids":[]},{"aliases":["YTZP sintered","zirconia"],"designations":[{"system_id":"supplier","value":"YTZP sintered"}],"id":"coorstek-ytzp-sintered","identity_kind":"commercial_grade","name":"CoorsTek YTZP sintered","notes":"CoorsTek zirconia material with supplier-reported typical properties.","primary_taxon_id":"ceramics","supplemental_taxon_ids":[]},{"aliases":["YTZP HIPed","zirconia"],"designations":[{"system_id":"supplier","value":"YTZP HIPed"}],"id":"coorstek-ytzp-hiped","identity_kind":"commercial_grade","name":"CoorsTek YTZP HIPed","notes":"CoorsTek zirconia material with supplier-reported typical properties.","primary_taxon_id":"ceramics","supplemental_taxon_ids":[]},{"aliases":["SC-RB SC-2","carbide"],"designations":[{"system_id":"supplier","value":"SC-RB SC-2"}],"id":"coorstek-sc-rb-sc-2","identity_kind":"commercial_grade","name":"CoorsTek SC-RB SC-2","notes":"CoorsTek carbide material with supplier-reported typical properties.","primary_taxon_id":"ceramics","supplemental_taxon_ids":[]},{"aliases":["UltraSiC SC-30","carbide"],"designations":[{"system_id":"supplier","value":"UltraSiC SC-30"}],"id":"coorstek-ultrasic-sc-30","identity_kind":"commercial_grade","name":"CoorsTek UltraSiC SC-30","notes":"CoorsTek carbide material with supplier-reported typical properties.","primary_taxon_id":"ceramics","supplemental_taxon_ids":[]},{"aliases":["PureSiC CVD","carbide"],"designations":[{"system_id":"supplier","value":"PureSiC CVD"}],"id":"coorstek-puresic-cvd","identity_kind":"commercial_grade","name":"CoorsTek PureSiC CVD","notes":"CoorsTek carbide material with supplier-reported typical properties.","primary_taxon_id":"ceramics","supplemental_taxon_ids":[]},{"aliases":["RBB4C","carbide"],"designations":[{"system_id":"supplier","value":"RBB4C"}],"id":"coorstek-rbb4c","identity_kind":"commercial_grade","name":"CoorsTek RBB4C","notes":"CoorsTek carbide material with supplier-reported typical properties.","primary_taxon_id":"ceramics","supplemental_taxon_ids":[]},{"aliases":["HPB4C","carbide"],"designations":[{"system_id":"supplier","value":"HPB4C"}],"id":"coorstek-hpb4c","identity_kind":"commercial_grade","name":"CoorsTek HPB4C","notes":"CoorsTek carbide material with supplier-reported typical properties.","primary_taxon_id":"ceramics","supplemental_taxon_ids":[]},{"aliases":["WC ACI-NI6","carbide"],"designations":[{"system_id":"supplier","value":"WC ACI-NI6"}],"id":"coorstek-wc-aci-ni6","identity_kind":"commercial_grade","name":"CoorsTek WC ACI-NI6","notes":"CoorsTek carbide material with supplier-reported typical properties.","primary_taxon_id":"ceramics","supplemental_taxon_ids":[]},{"aliases":["HP AlN","nitride"],"designations":[{"system_id":"supplier","value":"HP AlN"}],"id":"coorstek-hp-aln","identity_kind":"commercial_grade","name":"CoorsTek HP AlN","notes":"CoorsTek nitride material with supplier-reported typical properties.","primary_taxon_id":"ceramics","supplemental_taxon_ids":[]},{"aliases":["SN 101C","nitride"],"designations":[{"system_id":"supplier","value":"SN 101C"}],"id":"coorstek-sn-101c","identity_kind":"commercial_grade","name":"CoorsTek SN 101C","notes":"CoorsTek nitride material with supplier-reported typical properties.","primary_taxon_id":"ceramics","supplemental_taxon_ids":[]},{"aliases":["NBD-200","nitride"],"designations":[{"system_id":"supplier","value":"NBD-200"}],"id":"coorstek-nbd-200","identity_kind":"commercial_grade","name":"CoorsTek NBD-200","notes":"CoorsTek nitride material with supplier-reported typical properties.","primary_taxon_id":"ceramics","supplemental_taxon_ids":[]},{"aliases":["NT 154","nitride"],"designations":[{"system_id":"supplier","value":"NT 154"}],"id":"coorstek-nt-154","identity_kind":"commercial_grade","name":"CoorsTek NT 154","notes":"CoorsTek nitride material with supplier-reported typical properties.","primary_taxon_id":"ceramics","supplemental_taxon_ids":[]},{"aliases":["Core 304/4301","1.4301","304","S30400","stainless","austenitic"],"designations":[{"system_id":"en","value":"1.4301"},{"system_id":"astm","value":"304"},{"system_id":"uns","value":"S30400"}],"id":"stainless-core-304-4301","identity_kind":"standard_grade","name":"Stainless steel Core 304/4301","notes":"Outokumpu austenitic stainless grade. Mechanical limits describe cold rolled sheet; physical values are listed separately by the supplier.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["Core 304L/4307","1.4307","304L","S30403","stainless","austenitic"],"designations":[{"system_id":"en","value":"1.4307"},{"system_id":"astm","value":"304L"},{"system_id":"uns","value":"S30403"}],"id":"stainless-core-304l-4307","identity_kind":"standard_grade","name":"Stainless steel Core 304L/4307","notes":"Outokumpu austenitic stainless grade. Mechanical limits describe cold rolled sheet; physical values are listed separately by the supplier.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["Core 304LN/4311","1.4311","304LN","S30453","stainless","austenitic"],"designations":[{"system_id":"en","value":"1.4311"},{"system_id":"astm","value":"304LN"},{"system_id":"uns","value":"S30453"}],"id":"stainless-core-304ln-4311","identity_kind":"standard_grade","name":"Stainless steel Core 304LN/4311","notes":"Outokumpu austenitic stainless grade. Mechanical limits describe cold rolled sheet; physical values are listed separately by the supplier.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["Core 304L/4306","1.4306","304L","S30403","stainless","austenitic"],"designations":[{"system_id":"en","value":"1.4306"},{"system_id":"astm","value":"304L"},{"system_id":"uns","value":"S30403"}],"id":"stainless-core-304l-4306","identity_kind":"standard_grade","name":"Stainless steel Core 304L/4306","notes":"Outokumpu austenitic stainless grade. Mechanical limits describe cold rolled sheet; physical values are listed separately by the supplier.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["Core 305/4303","1.4303","305","S30500","stainless","austenitic"],"designations":[{"system_id":"en","value":"1.4303"},{"system_id":"astm","value":"305"},{"system_id":"uns","value":"S30500"}],"id":"stainless-core-305-4303","identity_kind":"standard_grade","name":"Stainless steel Core 305/4303","notes":"Outokumpu austenitic stainless grade. Mechanical limits describe cold rolled sheet; physical values are listed separately by the supplier.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["Core 321/4541","1.4541","321","S32100","stainless","austenitic"],"designations":[{"system_id":"en","value":"1.4541"},{"system_id":"astm","value":"321"},{"system_id":"uns","value":"S32100"}],"id":"stainless-core-321-4541","identity_kind":"standard_grade","name":"Stainless steel Core 321/4541","notes":"Outokumpu austenitic stainless grade. Mechanical limits describe cold rolled sheet; physical values are listed separately by the supplier.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["Core 347/4550","1.4550","347","S34700","stainless","austenitic"],"designations":[{"system_id":"en","value":"1.4550"},{"system_id":"astm","value":"347"},{"system_id":"uns","value":"S34700"}],"id":"stainless-core-347-4550","identity_kind":"standard_grade","name":"Stainless steel Core 347/4550","notes":"Outokumpu austenitic stainless grade. Mechanical limits describe cold rolled sheet; physical values are listed separately by the supplier.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["Core 301LN/4318","1.4318","301LN","S30153","stainless","austenitic"],"designations":[{"system_id":"en","value":"1.4318"},{"system_id":"astm","value":"301LN"},{"system_id":"uns","value":"S30153"}],"id":"stainless-core-301ln-4318","identity_kind":"standard_grade","name":"Stainless steel Core 301LN/4318","notes":"Outokumpu austenitic stainless grade. Mechanical limits describe cold rolled sheet; physical values are listed separately by the supplier.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["Core 301/4310","1.4310","301","S30100","stainless","austenitic"],"designations":[{"system_id":"en","value":"1.4310"},{"system_id":"astm","value":"301"},{"system_id":"uns","value":"S30100"}],"id":"stainless-core-301-4310","identity_kind":"standard_grade","name":"Stainless steel Core 301/4310","notes":"Outokumpu austenitic stainless grade. Mechanical limits describe cold rolled sheet; physical values are listed separately by the supplier.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["Core 201/4372","1.4372","201","S20100","stainless","austenitic"],"designations":[{"system_id":"en","value":"1.4372"},{"system_id":"astm","value":"201"},{"system_id":"uns","value":"S20100"}],"id":"stainless-core-201-4372","identity_kind":"standard_grade","name":"Stainless steel Core 201/4372","notes":"Outokumpu austenitic stainless grade. Mechanical limits describe cold rolled sheet; physical values are listed separately by the supplier.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["Core 201LN/4372","1.4372","201LN","S20153","stainless","austenitic"],"designations":[{"system_id":"en","value":"1.4372"},{"system_id":"astm","value":"201LN"},{"system_id":"uns","value":"S20153"}],"id":"stainless-core-201ln-4372","identity_kind":"standard_grade","name":"Stainless steel Core 201LN/4372","notes":"Outokumpu austenitic stainless grade. Mechanical limits describe cold rolled sheet; physical values are listed separately by the supplier.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["Core 441/4509","1.4509","S43940","stainless","ferritic"],"designations":[{"system_id":"en","value":"1.4509"},{"system_id":"uns","value":"S43940"}],"id":"stainless-core-441-4509","identity_kind":"standard_grade","name":"Stainless steel Core 441/4509","notes":"Outokumpu ferritic stainless grade. Mechanical limits describe cold rolled sheet; physical values are listed separately by the supplier.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["Core 439M","439M","S43932","stainless","ferritic"],"designations":[{"system_id":"astm","value":"439M"},{"system_id":"uns","value":"S43932"}],"id":"stainless-core-439m","identity_kind":"standard_grade","name":"Stainless steel Core 439M","notes":"Outokumpu ferritic stainless grade. Mechanical limits describe cold rolled sheet; physical values are listed separately by the supplier.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["Core 4622","1.4622","S44330","stainless","ferritic"],"designations":[{"system_id":"en","value":"1.4622"},{"system_id":"uns","value":"S44330"}],"id":"stainless-core-4622","identity_kind":"standard_grade","name":"Stainless steel Core 4622","notes":"Outokumpu ferritic stainless grade. Mechanical limits describe cold rolled sheet; physical values are listed separately by the supplier.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["Supra 316/4401","1.4401","316","stainless","austenitic"],"designations":[{"system_id":"en","value":"1.4401"},{"system_id":"astm","value":"316"}],"id":"stainless-supra-316-4401","identity_kind":"standard_grade","name":"Stainless steel Supra 316/4401","notes":"Outokumpu austenitic stainless grade. Mechanical limits describe cold rolled sheet; physical values are listed separately by the supplier.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["Supra 316L/4404","1.4404","316L","stainless","austenitic"],"designations":[{"system_id":"en","value":"1.4404"},{"system_id":"astm","value":"316L"}],"id":"stainless-supra-316l-4404","identity_kind":"standard_grade","name":"Stainless steel Supra 316L/4404","notes":"Outokumpu austenitic stainless grade. Mechanical limits describe cold rolled sheet; physical values are listed separately by the supplier.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["Supra 316plus","1.4420","316plus","stainless","austenitic"],"designations":[{"system_id":"en","value":"1.4420"},{"system_id":"astm","value":"316plus"}],"id":"stainless-supra-316plus","identity_kind":"standard_grade","name":"Stainless steel Supra 316plus","notes":"Outokumpu austenitic stainless grade. Mechanical limits describe cold rolled sheet; physical values are listed separately by the supplier.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["Supra 316/4436","1.4436","316","stainless","austenitic"],"designations":[{"system_id":"en","value":"1.4436"},{"system_id":"astm","value":"316"}],"id":"stainless-supra-316-4436","identity_kind":"standard_grade","name":"Stainless steel Supra 316/4436","notes":"Outokumpu austenitic stainless grade. Mechanical limits describe cold rolled sheet; physical values are listed separately by the supplier.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["Supra 316L/4432","1.4432","316L","stainless","austenitic"],"designations":[{"system_id":"en","value":"1.4432"},{"system_id":"astm","value":"316L"}],"id":"stainless-supra-316l-4432","identity_kind":"standard_grade","name":"Stainless steel Supra 316L/4432","notes":"Outokumpu austenitic stainless grade. Mechanical limits describe cold rolled sheet; physical values are listed separately by the supplier.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["Supra 316L/4435","1.4435","316L","stainless","austenitic"],"designations":[{"system_id":"en","value":"1.4435"},{"system_id":"astm","value":"316L"}],"id":"stainless-supra-316l-4435","identity_kind":"standard_grade","name":"Stainless steel Supra 316L/4435","notes":"Outokumpu austenitic stainless grade. Mechanical limits describe cold rolled sheet; physical values are listed separately by the supplier.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["Supra 316Ti/4571","1.4571","316Ti","stainless","austenitic"],"designations":[{"system_id":"en","value":"1.4571"},{"system_id":"astm","value":"316Ti"}],"id":"stainless-supra-316ti-4571","identity_kind":"standard_grade","name":"Stainless steel Supra 316Ti/4571","notes":"Outokumpu austenitic stainless grade. Mechanical limits describe cold rolled sheet; physical values are listed separately by the supplier.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["Supra 444/4521","1.4521","444","stainless","ferritic"],"designations":[{"system_id":"en","value":"1.4521"},{"system_id":"astm","value":"444"}],"id":"stainless-supra-444-4521","identity_kind":"standard_grade","name":"Stainless steel Supra 444/4521","notes":"Outokumpu ferritic stainless grade. Mechanical limits describe cold rolled sheet; physical values are listed separately by the supplier.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["1.4462","2205","DX 2205","Forta DX 2205","S32205","duplex"],"designations":[{"system_id":"en","value":"1.4462"},{"system_id":"astm","value":"2205"},{"system_id":"uns","value":"S32205"},{"system_id":"supplier","value":"Forta DX 2205"}],"id":"stainless-forta-dx-2205","identity_kind":"standard_grade","name":"Stainless steel Forta DX 2205","notes":"Outokumpu duplex grade. Cold rolled coil limits and grade-wide physical values.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["1.4162","Forta LDX 2101","LDX 2101","S32101","duplex"],"designations":[{"system_id":"en","value":"1.4162"},{"system_id":"uns","value":"S32101"},{"system_id":"supplier","value":"Forta LDX 2101"}],"id":"stainless-forta-ldx-2101","identity_kind":"standard_grade","name":"Stainless steel Forta LDX 2101","notes":"Outokumpu duplex grade. Cold rolled coil limits and grade-wide physical values.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["1.4362","2304","DX 2304","Forta DX 2304","S32304","duplex"],"designations":[{"system_id":"en","value":"1.4362"},{"system_id":"astm","value":"2304"},{"system_id":"uns","value":"S32304"},{"system_id":"supplier","value":"Forta DX 2304"}],"id":"stainless-forta-dx-2304","identity_kind":"standard_grade","name":"Stainless steel Forta DX 2304","notes":"Outokumpu duplex grade. Cold rolled coil limits and grade-wide physical values.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["1.4362","2304","EDX 2304","Forta EDX 2304","S32304","duplex"],"designations":[{"system_id":"en","value":"1.4362"},{"system_id":"astm","value":"2304"},{"system_id":"uns","value":"S32304"},{"system_id":"supplier","value":"Forta EDX 2304"}],"id":"stainless-forta-edx-2304","identity_kind":"standard_grade","name":"Stainless steel Forta EDX 2304","notes":"Outokumpu duplex grade. Cold rolled coil limits and grade-wide physical values.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["1.4662","Forta LDX 2404","LDX 2404","S82441","duplex"],"designations":[{"system_id":"en","value":"1.4662"},{"system_id":"uns","value":"S82441"},{"system_id":"supplier","value":"Forta LDX 2404"}],"id":"stainless-forta-ldx-2404","identity_kind":"standard_grade","name":"Stainless steel Forta LDX 2404","notes":"Outokumpu duplex grade. Cold rolled coil limits and grade-wide physical values.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["1.4501","Forta SDX 100","S32760","SDX 100","duplex"],"designations":[{"system_id":"en","value":"1.4501"},{"system_id":"uns","value":"S32760"},{"system_id":"supplier","value":"Forta SDX 100"}],"id":"stainless-forta-sdx-100","identity_kind":"standard_grade","name":"Stainless steel Forta SDX 100","notes":"Outokumpu duplex grade. Cold rolled coil limits and grade-wide physical values.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["1.4410","2507","Forta SDX 2507","S32750","SDX 2507","duplex"],"designations":[{"system_id":"en","value":"1.4410"},{"system_id":"astm","value":"2507"},{"system_id":"uns","value":"S32750"},{"system_id":"supplier","value":"Forta SDX 2507"}],"id":"stainless-forta-sdx-2507","identity_kind":"standard_grade","name":"Stainless steel Forta SDX 2507","notes":"Outokumpu duplex grade. Cold rolled coil limits and grade-wide physical values.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["1.4835","253 MA","S30815","Therma 253 MA","heat resistant"],"designations":[{"system_id":"en","value":"1.4835"},{"system_id":"uns","value":"S30815"},{"system_id":"supplier","value":"Therma 253 MA"}],"id":"stainless-therma-253-ma","identity_kind":"standard_grade","name":"Stainless steel Therma 253 MA","notes":"Outokumpu heat-resistant grade; properties at explicitly stated temperatures.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["1.4845","310S","310S/4845","S31008","Therma 310S/4845","heat resistant"],"designations":[{"system_id":"en","value":"1.4845"},{"system_id":"astm","value":"310S"},{"system_id":"uns","value":"S31008"},{"system_id":"supplier","value":"Therma 310S/4845"}],"id":"stainless-therma-310s-4845","identity_kind":"standard_grade","name":"Stainless steel Therma 310S/4845","notes":"Outokumpu heat-resistant grade; properties at explicitly stated temperatures.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["1.4948","304H","304H/4948","S30409","Therma 304H/4948","heat resistant"],"designations":[{"system_id":"en","value":"1.4948"},{"system_id":"astm","value":"304H"},{"system_id":"uns","value":"S30409"},{"system_id":"supplier","value":"Therma 304H/4948"}],"id":"stainless-therma-304h-4948","identity_kind":"standard_grade","name":"Stainless steel Therma 304H/4948","notes":"Outokumpu heat-resistant grade; properties at explicitly stated temperatures.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["1.4878","321H","321H/4878","Therma 321H/4878","heat resistant"],"designations":[{"system_id":"en","value":"1.4878"},{"system_id":"astm","value":"321H"},{"system_id":"supplier","value":"Therma 321H/4878"}],"id":"stainless-therma-321h-4878","identity_kind":"standard_grade","name":"Stainless steel Therma 321H/4878","notes":"Outokumpu heat-resistant grade; properties at explicitly stated temperatures.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["347H","S34709","Therma 347H","heat resistant"],"designations":[{"system_id":"astm","value":"347H"},{"system_id":"uns","value":"S34709"},{"system_id":"supplier","value":"Therma 347H"}],"id":"stainless-therma-347h","identity_kind":"standard_grade","name":"Stainless steel Therma 347H","notes":"Outokumpu heat-resistant grade; properties at explicitly stated temperatures.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["1.4828","4828","Therma 4828","heat resistant"],"designations":[{"system_id":"en","value":"1.4828"},{"system_id":"supplier","value":"Therma 4828"}],"id":"stainless-therma-4828","identity_kind":"standard_grade","name":"Stainless steel Therma 4828","notes":"Outokumpu heat-resistant grade; properties at explicitly stated temperatures.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["1.4833","309S","309S/4833","S30908","Therma 309S/4833","heat resistant"],"designations":[{"system_id":"en","value":"1.4833"},{"system_id":"astm","value":"309S"},{"system_id":"uns","value":"S30908"},{"system_id":"supplier","value":"Therma 309S/4833"}],"id":"stainless-therma-309s-4833","identity_kind":"standard_grade","name":"Stainless steel Therma 309S/4833","notes":"Outokumpu heat-resistant grade; properties at explicitly stated temperatures.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["1.4841","314","314/4841","S31400","Therma 314/4841","heat resistant"],"designations":[{"system_id":"en","value":"1.4841"},{"system_id":"astm","value":"314"},{"system_id":"uns","value":"S31400"},{"system_id":"supplier","value":"Therma 314/4841"}],"id":"stainless-therma-314-4841","identity_kind":"standard_grade","name":"Stainless steel Therma 314/4841","notes":"Outokumpu heat-resistant grade; properties at explicitly stated temperatures.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["1.4713","4713","Therma 4713","heat resistant"],"designations":[{"system_id":"en","value":"1.4713"},{"system_id":"supplier","value":"Therma 4713"}],"id":"stainless-therma-4713","identity_kind":"standard_grade","name":"Stainless steel Therma 4713","notes":"Outokumpu heat-resistant grade; properties at explicitly stated temperatures.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["1.4724","4724","Therma 4724","heat resistant"],"designations":[{"system_id":"en","value":"1.4724"},{"system_id":"supplier","value":"Therma 4724"}],"id":"stainless-therma-4724","identity_kind":"standard_grade","name":"Stainless steel Therma 4724","notes":"Outokumpu heat-resistant grade; properties at explicitly stated temperatures.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["1.4539","904L","N08904","Ultra 904L"],"designations":[{"system_id":"en","value":"1.4539"},{"system_id":"astm","value":"904L"},{"system_id":"uns","value":"N08904"},{"system_id":"supplier","value":"Ultra 904L"}],"id":"stainless-ultra-904l","identity_kind":"standard_grade","name":"Stainless steel Ultra 904L","notes":"Outokumpu grade. Physical values and available cold rolled limits remain separately scoped.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["1.4547","254 SMO","S31254","Ultra 254 SMO"],"designations":[{"system_id":"en","value":"1.4547"},{"system_id":"uns","value":"S31254"},{"system_id":"supplier","value":"Ultra 254 SMO"}],"id":"stainless-ultra-254-smo","identity_kind":"standard_grade","name":"Stainless steel Ultra 254 SMO","notes":"Outokumpu grade. Physical values and available cold rolled limits remain separately scoped.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["2.4858","Alloy 825","N08825","Ultra Alloy 825"],"designations":[{"system_id":"uns","value":"N08825"},{"system_id":"supplier","value":"Ultra Alloy 825"},{"system_id":"din","value":"2.4858"}],"id":"nickel-ultra-alloy-825","identity_kind":"standard_grade","name":"Nickel alloy Ultra Alloy 825","notes":"Outokumpu grade. Physical values and available cold rolled limits remain separately scoped.","primary_taxon_id":"nickel-alloys","supplemental_taxon_ids":[]},{"aliases":["317L","S31703","Ultra 317L"],"designations":[{"system_id":"astm","value":"317L"},{"system_id":"uns","value":"S31703"},{"system_id":"supplier","value":"Ultra 317L"}],"id":"stainless-ultra-317l","identity_kind":"standard_grade","name":"Stainless steel Ultra 317L","notes":"Outokumpu grade. Physical values and available cold rolled limits remain separately scoped.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["1.4466","310MoLN2","725LN","S31050","Ultra 725LN"],"designations":[{"system_id":"en","value":"1.4466"},{"system_id":"astm","value":"310MoLN2"},{"system_id":"uns","value":"S31050"},{"system_id":"supplier","value":"Ultra 725LN"}],"id":"stainless-ultra-725ln","identity_kind":"standard_grade","name":"Stainless steel Ultra 725LN","notes":"Outokumpu grade. Physical values and available cold rolled limits remain separately scoped.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["1.4529","6XN","N08367","N08926","N08926 / N08367","Ultra 6XN"],"designations":[{"system_id":"en","value":"1.4529"},{"system_id":"uns","value":"N08926 / N08367"},{"system_id":"supplier","value":"Ultra 6XN"}],"id":"stainless-ultra-6xn","identity_kind":"standard_grade","name":"Stainless steel Ultra 6XN","notes":"Outokumpu grade. Physical values and available cold rolled limits remain separately scoped.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["1.4652","654 SMO","S32654","Ultra 654 SMO"],"designations":[{"system_id":"en","value":"1.4652"},{"system_id":"uns","value":"S32654"},{"system_id":"supplier","value":"Ultra 654 SMO"}],"id":"stainless-ultra-654-smo","identity_kind":"standard_grade","name":"Stainless steel Ultra 654 SMO","notes":"Outokumpu grade. Physical values and available cold rolled limits remain separately scoped.","primary_taxon_id":"stainless-steels","supplemental_taxon_ids":[]},{"aliases":["1060","Al 1060","Aluminum 1060","AA 1060"],"designations":[{"system_id":"aa","value":"1060"}],"id":"al-1060","identity_kind":"standard_grade","name":"Aluminium 1060","notes":"Hydro extrusion reference. Alloy-wide density and selected standard temper properties.","primary_taxon_id":"aluminium-alloys","supplemental_taxon_ids":[]},{"aliases":["1100","Al 1100","Aluminum 1100","AA 1100"],"designations":[{"system_id":"aa","value":"1100"}],"id":"al-1100","identity_kind":"standard_grade","name":"Aluminium 1100","notes":"Hydro extrusion reference. Alloy-wide density and selected standard temper properties.","primary_taxon_id":"aluminium-alloys","supplemental_taxon_ids":[]},{"aliases":["1350","Al 1350","Aluminum 1350","AA 1350"],"designations":[{"system_id":"aa","value":"1350"}],"id":"al-1350","identity_kind":"standard_grade","name":"Aluminium 1350","notes":"Hydro extrusion reference. Alloy-wide density and selected standard temper properties.","primary_taxon_id":"aluminium-alloys","supplemental_taxon_ids":[]},{"aliases":["6005","Al 6005","Aluminum 6005","AA 6005"],"designations":[{"system_id":"aa","value":"6005"}],"id":"al-6005","identity_kind":"standard_grade","name":"Aluminium 6005","notes":"Hydro extrusion reference. Alloy-wide density and selected standard temper properties.","primary_taxon_id":"aluminium-alloys","supplemental_taxon_ids":[]},{"aliases":["6105","Al 6105","Aluminum 6105","AA 6105"],"designations":[{"system_id":"aa","value":"6105"}],"id":"al-6105","identity_kind":"standard_grade","name":"Aluminium 6105","notes":"Hydro extrusion reference. Alloy-wide density and selected standard temper properties.","primary_taxon_id":"aluminium-alloys","supplemental_taxon_ids":[]},{"aliases":["6005A","Al 6005A","Aluminum 6005A","AA 6005A"],"designations":[{"system_id":"aa","value":"6005A"}],"id":"al-6005a","identity_kind":"standard_grade","name":"Aluminium 6005A","notes":"Hydro extrusion reference. Alloy-wide density and selected standard temper properties.","primary_taxon_id":"aluminium-alloys","supplemental_taxon_ids":[]},{"aliases":["6063","Al 6063","Aluminum 6063","AA 6063"],"designations":[{"system_id":"aa","value":"6063"}],"id":"al-6063","identity_kind":"standard_grade","name":"Aluminium 6063","notes":"Hydro extrusion reference. Alloy-wide density and selected standard temper properties.","primary_taxon_id":"aluminium-alloys","supplemental_taxon_ids":[]},{"aliases":["6042","Al 6042","Aluminum 6042","AA 6042"],"designations":[{"system_id":"aa","value":"6042"}],"id":"al-6042","identity_kind":"standard_grade","name":"Aluminium 6042","notes":"Hydro extrusion reference. Alloy-wide density and selected standard temper properties.","primary_taxon_id":"aluminium-alloys","supplemental_taxon_ids":[]},{"aliases":["6082","Al 6082","Aluminum 6082","AA 6082"],"designations":[{"system_id":"aa","value":"6082"}],"id":"al-6082","identity_kind":"standard_grade","name":"Aluminium 6082","notes":"Hydro extrusion reference. Alloy-wide density and selected standard temper properties.","primary_taxon_id":"aluminium-alloys","supplemental_taxon_ids":[]},{"aliases":["6101","Al 6101","Aluminum 6101","AA 6101"],"designations":[{"system_id":"aa","value":"6101"}],"id":"al-6101","identity_kind":"standard_grade","name":"Aluminium 6101","notes":"Hydro extrusion reference. Alloy-wide density and selected standard temper properties.","primary_taxon_id":"aluminium-alloys","supplemental_taxon_ids":[]},{"aliases":["6262","Al 6262","Aluminum 6262","AA 6262"],"designations":[{"system_id":"aa","value":"6262"}],"id":"al-6262","identity_kind":"standard_grade","name":"Aluminium 6262","notes":"Hydro extrusion reference. Alloy-wide density and selected standard temper properties.","primary_taxon_id":"aluminium-alloys","supplemental_taxon_ids":[]},{"aliases":["C10100","UNS C10100"],"designations":[{"system_id":"uns","value":"C10100"}],"id":"cu-c10100","identity_kind":"standard_grade","name":"Copper C10100","notes":"Supplier physical properties at 20 °C; no mechanical temper specified.","primary_taxon_id":"copper-alloys","supplemental_taxon_ids":[]},{"aliases":["C10200","UNS C10200"],"designations":[{"system_id":"uns","value":"C10200"}],"id":"cu-c10200","identity_kind":"standard_grade","name":"Copper C10200","notes":"Supplier physical properties at 20 °C; no mechanical temper specified.","primary_taxon_id":"copper-alloys","supplemental_taxon_ids":[]},{"aliases":["C11000","UNS C11000"],"designations":[{"system_id":"uns","value":"C11000"}],"id":"cu-c11000","identity_kind":"standard_grade","name":"Copper C11000","notes":"Supplier physical properties at 20 °C; no mechanical temper specified.","primary_taxon_id":"copper-alloys","supplemental_taxon_ids":[]},{"aliases":["C12200","UNS C12200"],"designations":[{"system_id":"uns","value":"C12200"}],"id":"cu-c12200","identity_kind":"standard_grade","name":"Copper C12200","notes":"Supplier physical properties at 20 °C; no mechanical temper specified.","primary_taxon_id":"copper-alloys","supplemental_taxon_ids":[]},{"aliases":["C14300","UNS C14300"],"designations":[{"system_id":"uns","value":"C14300"}],"id":"cu-c14300","identity_kind":"standard_grade","name":"Copper C14300","notes":"Supplier physical properties at 20 °C; no mechanical temper specified.","primary_taxon_id":"copper-alloys","supplemental_taxon_ids":[]},{"aliases":["C14500","UNS C14500"],"designations":[{"system_id":"uns","value":"C14500"}],"id":"cu-c14500","identity_kind":"standard_grade","name":"Copper C14500","notes":"Supplier physical properties at 20 °C; no mechanical temper specified.","primary_taxon_id":"copper-alloys","supplemental_taxon_ids":[]},{"aliases":["C17200","UNS C17200"],"designations":[{"system_id":"uns","value":"C17200"}],"id":"cu-c17200","identity_kind":"standard_grade","name":"Copper alloy C17200","notes":"Supplier physical properties at 20 °C; no mechanical temper specified.","primary_taxon_id":"copper-alloys","supplemental_taxon_ids":[]},{"aliases":["C17300","UNS C17300"],"designations":[{"system_id":"uns","value":"C17300"}],"id":"cu-c17300","identity_kind":"standard_grade","name":"Copper alloy C17300","notes":"Supplier physical properties at 20 °C; no mechanical temper specified.","primary_taxon_id":"copper-alloys","supplemental_taxon_ids":[]},{"aliases":["C17510","UNS C17510"],"designations":[{"system_id":"uns","value":"C17510"}],"id":"cu-c17510","identity_kind":"standard_grade","name":"Copper alloy C17510","notes":"Supplier physical properties at 20 °C; no mechanical temper specified.","primary_taxon_id":"copper-alloys","supplemental_taxon_ids":[]},{"aliases":["C18000","UNS C18000"],"designations":[{"system_id":"uns","value":"C18000"}],"id":"cu-c18000","identity_kind":"standard_grade","name":"Copper alloy C18000","notes":"Supplier physical properties at 20 °C; no mechanical temper specified.","primary_taxon_id":"copper-alloys","supplemental_taxon_ids":[]},{"aliases":["C18200","UNS C18200"],"designations":[{"system_id":"uns","value":"C18200"}],"id":"cu-c18200","identity_kind":"standard_grade","name":"Copper alloy C18200","notes":"Supplier physical properties at 20 °C; no mechanical temper specified.","primary_taxon_id":"copper-alloys","supplemental_taxon_ids":[]},{"aliases":["C18700","UNS C18700"],"designations":[{"system_id":"uns","value":"C18700"}],"id":"cu-c18700","identity_kind":"standard_grade","name":"Copper alloy C18700","notes":"Supplier physical properties at 20 °C; no mechanical temper specified.","primary_taxon_id":"copper-alloys","supplemental_taxon_ids":[]},{"aliases":["C21000","UNS C21000"],"designations":[{"system_id":"uns","value":"C21000"}],"id":"cu-c21000","identity_kind":"standard_grade","name":"Brass C21000","notes":"Supplier physical properties at 20 °C; no mechanical temper specified.","primary_taxon_id":"brasses","supplemental_taxon_ids":[]},{"aliases":["C22000","UNS C22000"],"designations":[{"system_id":"uns","value":"C22000"}],"id":"cu-c22000","identity_kind":"standard_grade","name":"Brass C22000","notes":"Supplier physical properties at 20 °C; no mechanical temper specified.","primary_taxon_id":"brasses","supplemental_taxon_ids":[]},{"aliases":["C23000","UNS C23000"],"designations":[{"system_id":"uns","value":"C23000"}],"id":"cu-c23000","identity_kind":"standard_grade","name":"Brass C23000","notes":"Supplier physical properties at 20 °C; no mechanical temper specified.","primary_taxon_id":"brasses","supplemental_taxon_ids":[]},{"aliases":["C26000","UNS C26000"],"designations":[{"system_id":"uns","value":"C26000"}],"id":"cu-c26000","identity_kind":"standard_grade","name":"Brass C26000","notes":"Supplier physical properties at 20 °C; no mechanical temper specified.","primary_taxon_id":"brasses","supplemental_taxon_ids":[]},{"aliases":["C28000","UNS C28000"],"designations":[{"system_id":"uns","value":"C28000"}],"id":"cu-c28000","identity_kind":"standard_grade","name":"Brass C28000","notes":"Supplier physical properties at 20 °C; no mechanical temper specified.","primary_taxon_id":"brasses","supplemental_taxon_ids":[]},{"aliases":["C33000","UNS C33000"],"designations":[{"system_id":"uns","value":"C33000"}],"id":"cu-c33000","identity_kind":"standard_grade","name":"Leaded brass C33000","notes":"Supplier physical properties at 20 °C; no mechanical temper specified.","primary_taxon_id":"brasses","supplemental_taxon_ids":[]},{"aliases":["C35300","UNS C35300"],"designations":[{"system_id":"uns","value":"C35300"}],"id":"cu-c35300","identity_kind":"standard_grade","name":"Leaded brass C35300","notes":"Supplier physical properties at 20 °C; no mechanical temper specified.","primary_taxon_id":"brasses","supplemental_taxon_ids":[]},{"aliases":["C36000","UNS C36000"],"designations":[{"system_id":"uns","value":"C36000"}],"id":"cu-c36000","identity_kind":"standard_grade","name":"Leaded brass C36000","notes":"Supplier physical properties at 20 °C; no mechanical temper specified.","primary_taxon_id":"brasses","supplemental_taxon_ids":[]},{"aliases":["C36500","UNS C36500"],"designations":[{"system_id":"uns","value":"C36500"}],"id":"cu-c36500","identity_kind":"standard_grade","name":"Leaded brass C36500","notes":"Supplier physical properties at 20 °C; no mechanical temper specified.","primary_taxon_id":"brasses","supplemental_taxon_ids":[]},{"aliases":["C38500","UNS C38500"],"designations":[{"system_id":"uns","value":"C38500"}],"id":"cu-c38500","identity_kind":"standard_grade","name":"Leaded brass C38500","notes":"Supplier physical properties at 20 °C; no mechanical temper specified.","primary_taxon_id":"brasses","supplemental_taxon_ids":[]},{"aliases":["C46400","UNS C46400"],"designations":[{"system_id":"uns","value":"C46400"}],"id":"cu-c46400","identity_kind":"standard_grade","name":"Tin brass C46400","notes":"Supplier physical properties at 20 °C; no mechanical temper specified.","primary_taxon_id":"brasses","supplemental_taxon_ids":[]},{"aliases":["C48500","UNS C48500"],"designations":[{"system_id":"uns","value":"C48500"}],"id":"cu-c48500","identity_kind":"standard_grade","name":"Tin brass C48500","notes":"Supplier physical properties at 20 °C; no mechanical temper specified.","primary_taxon_id":"brasses","supplemental_taxon_ids":[]},{"aliases":["C51000","UNS C51000"],"designations":[{"system_id":"uns","value":"C51000"}],"id":"cu-c51000","identity_kind":"standard_grade","name":"Phosphor bronze C51000","notes":"Supplier physical properties at 20 °C; no mechanical temper specified.","primary_taxon_id":"bronzes","supplemental_taxon_ids":[]},{"aliases":["C54400","UNS C54400"],"designations":[{"system_id":"uns","value":"C54400"}],"id":"cu-c54400","identity_kind":"standard_grade","name":"Leaded phosphor bronze C54400","notes":"Supplier physical properties at 20 °C; no mechanical temper specified.","primary_taxon_id":"bronzes","supplemental_taxon_ids":[]},{"aliases":["C64200","UNS C64200"],"designations":[{"system_id":"uns","value":"C64200"}],"id":"cu-c64200","identity_kind":"standard_grade","name":"Aluminum silicon bronze C64200","notes":"Supplier physical properties at 20 °C; no mechanical temper specified.","primary_taxon_id":"bronzes","supplemental_taxon_ids":[]},{"aliases":["C65500","UNS C65500"],"designations":[{"system_id":"uns","value":"C65500"}],"id":"cu-c65500","identity_kind":"standard_grade","name":"Silicon bronze C65500","notes":"Supplier physical properties at 20 °C; no mechanical temper specified.","primary_taxon_id":"bronzes","supplemental_taxon_ids":[]},{"aliases":["C71500","UNS C71500"],"designations":[{"system_id":"uns","value":"C71500"}],"id":"cu-c71500","identity_kind":"standard_grade","name":"Copper-nickel C71500","notes":"Supplier physical properties at 20 °C; no mechanical temper specified.","primary_taxon_id":"copper-alloys","supplemental_taxon_ids":[]},{"aliases":["C75200","UNS C75200"],"designations":[{"system_id":"uns","value":"C75200"}],"id":"cu-c75200","identity_kind":"standard_grade","name":"Nickel silver C75200","notes":"Supplier physical properties at 20 °C; no mechanical temper specified.","primary_taxon_id":"copper-alloys","supplemental_taxon_ids":[]},{"aliases":["Ti6Al4V","Ti-6Al-4V","Ti64","Grade 5 titanium","TIMETAL 6-4"],"designations":[{"system_id":"astm","value":"Grade 5"},{"system_id":"supplier","value":"TIMETAL 6-4"}],"id":"ti-6al-4v","identity_kind":"standard_grade","name":"Titanium Ti-6Al-4V","notes":"TIMET reference with temperature-specific physical values.","primary_taxon_id":"titanium-alloys","supplemental_taxon_ids":[]},{"aliases":["Ti6246","Ti-6246","TIMETAL 6-2-4-6","R56260"],"designations":[{"system_id":"uns","value":"R56260"},{"system_id":"supplier","value":"TIMETAL 6-2-4-6"}],"id":"ti-6al-2sn-4zr-6mo","identity_kind":"standard_grade","name":"Titanium Ti-6Al-2Sn-4Zr-6Mo","notes":"TIMET reference with temperature-specific physical values.","primary_taxon_id":"titanium-alloys","supplemental_taxon_ids":[]},{"aliases":["Atlas M1020","M1020"],"designations":[{"system_id":"as","value":"M1020"},{"system_id":"supplier","value":"Atlas M1020"}],"id":"steel-atlas-m1020","identity_kind":"standard_grade","name":"Steel Atlas M1020","notes":"Atlas bar reference; properties apply only to the stated supply condition and size.","primary_taxon_id":"carbon-steels","supplemental_taxon_ids":[]},{"aliases":["Atlas M1030","M1030"],"designations":[{"system_id":"as","value":"M1030"},{"system_id":"supplier","value":"Atlas M1030"}],"id":"steel-atlas-m1030","identity_kind":"standard_grade","name":"Steel Atlas M1030","notes":"Atlas bar reference; properties apply only to the stated supply condition and size.","primary_taxon_id":"carbon-steels","supplemental_taxon_ids":[]},{"aliases":["1045","Atlas 1045"],"designations":[{"system_id":"as","value":"1045"},{"system_id":"supplier","value":"Atlas 1045"}],"id":"steel-atlas-1045","identity_kind":"standard_grade","name":"Steel Atlas 1045","notes":"Atlas bar reference; properties apply only to the stated supply condition and size.","primary_taxon_id":"carbon-steels","supplemental_taxon_ids":[]},{"aliases":["1214","1214FM","Atlas 1214FM"],"designations":[{"system_id":"as","value":"1214FM"},{"system_id":"supplier","value":"Atlas 1214FM"}],"id":"steel-atlas-1214fm","identity_kind":"standard_grade","name":"Steel Atlas 1214FM","notes":"Atlas bar reference; properties apply only to the stated supply condition and size.","primary_taxon_id":"carbon-steels","supplemental_taxon_ids":[]},{"aliases":["12L14","12L14FM","Atlas 12L14FM"],"designations":[{"system_id":"as","value":"12L14FM"},{"system_id":"supplier","value":"Atlas 12L14FM"}],"id":"steel-atlas-12l14fm","identity_kind":"standard_grade","name":"Steel Atlas 12L14FM","notes":"Atlas bar reference; properties apply only to the stated supply condition and size.","primary_taxon_id":"carbon-steels","supplemental_taxon_ids":[]},{"aliases":["4140","Atlas 4140"],"designations":[{"system_id":"as","value":"4140"},{"system_id":"supplier","value":"Atlas 4140"}],"id":"steel-atlas-4140","identity_kind":"standard_grade","name":"Steel Atlas 4140","notes":"Atlas bar reference; properties apply only to the stated supply condition and size.","primary_taxon_id":"alloy-steels","supplemental_taxon_ids":[]},{"aliases":["1.6582","34CrNiMo6","6582","Atlas 6582"],"designations":[{"system_id":"en","value":"34CrNiMo6"},{"system_id":"din","value":"1.6582"},{"system_id":"supplier","value":"Atlas 6582"}],"id":"steel-atlas-6582","identity_kind":"standard_grade","name":"Steel Atlas 6582","notes":"Atlas bar reference; properties apply only to the stated supply condition and size.","primary_taxon_id":"alloy-steels","supplemental_taxon_ids":[]},{"aliases":["4340","Atlas 4340"],"designations":[{"system_id":"as","value":"4340"},{"system_id":"supplier","value":"Atlas 4340"}],"id":"steel-atlas-4340","identity_kind":"standard_grade","name":"Steel Atlas 4340","notes":"Atlas bar reference; properties apply only to the stated supply condition and size.","primary_taxon_id":"alloy-steels","supplemental_taxon_ids":[]},{"aliases":["1.6580","30CrNiMo8","6580","Atlas 6580"],"designations":[{"system_id":"en","value":"30CrNiMo8"},{"system_id":"din","value":"1.6580"},{"system_id":"supplier","value":"Atlas 6580"}],"id":"steel-atlas-6580","identity_kind":"standard_grade","name":"Steel Atlas 6580","notes":"Atlas bar reference; properties apply only to the stated supply condition and size.","primary_taxon_id":"alloy-steels","supplemental_taxon_ids":[]},{"aliases":["8620H","Atlas 8620H"],"designations":[{"system_id":"as","value":"8620H"},{"system_id":"supplier","value":"Atlas 8620H"}],"id":"steel-atlas-8620h","identity_kind":"standard_grade","name":"Steel Atlas 8620H","notes":"Atlas bar reference; properties apply only to the stated supply condition and size.","primary_taxon_id":"case-hardening-steels","supplemental_taxon_ids":[]},{"aliases":["1.6587","18CrNiMo7-6","6587","Atlas 6587"],"designations":[{"system_id":"en","value":"18CrNiMo7-6"},{"system_id":"din","value":"1.6587"},{"system_id":"supplier","value":"Atlas 6587"}],"id":"steel-atlas-6587","identity_kind":"standard_grade","name":"Steel Atlas 6587","notes":"Atlas bar reference; properties apply only to the stated supply condition and size.","primary_taxon_id":"case-hardening-steels","supplemental_taxon_ids":[]},{"aliases":["1.6657","14NiCrMo13-4","6657","Atlas 6657"],"designations":[{"system_id":"en","value":"14NiCrMo13-4"},{"system_id":"din","value":"1.6657"},{"system_id":"supplier","value":"Atlas 6657"}],"id":"steel-atlas-6657","identity_kind":"standard_grade","name":"Steel Atlas 6657","notes":"Atlas bar reference; properties apply only to the stated supply condition and size.","primary_taxon_id":"case-hardening-steels","supplemental_taxon_ids":[]},{"aliases":["1.1303","38MnSiVS5","Atlas Micro900","Micro900"],"designations":[{"system_id":"en","value":"38MnSiVS5"},{"system_id":"din","value":"1.1303"},{"system_id":"supplier","value":"Atlas Micro900"}],"id":"steel-atlas-micro900","identity_kind":"standard_grade","name":"Steel Atlas Micro900","notes":"Atlas bar reference; properties apply only to the stated supply condition and size.","primary_taxon_id":"alloy-steels","supplemental_taxon_ids":[]},{"aliases":["1.2510","Arne","O1","Uddeholm Arne"],"designations":[{"system_id":"aisi","value":"O1"},{"system_id":"din","value":"1.2510"},{"system_id":"supplier","value":"Uddeholm Arne"}],"id":"steel-uddeholm-arne","identity_kind":"standard_grade","name":"Tool steel Uddeholm Arne","notes":"Uddeholm tool steel; each property retains its hardness and heat-treatment condition.","primary_taxon_id":"tool-steels","supplemental_taxon_ids":[]},{"aliases":["1.2363","A2","Rigor","Uddeholm Rigor"],"designations":[{"system_id":"aisi","value":"A2"},{"system_id":"din","value":"1.2363"},{"system_id":"supplier","value":"Uddeholm Rigor"}],"id":"steel-uddeholm-rigor","identity_kind":"standard_grade","name":"Tool steel Uddeholm Rigor","notes":"Uddeholm tool steel; each property retains its hardness and heat-treatment condition.","primary_taxon_id":"tool-steels","supplemental_taxon_ids":[]},{"aliases":["1.2379","D2","Sverker 21","Uddeholm Sverker 21"],"designations":[{"system_id":"aisi","value":"D2"},{"system_id":"din","value":"1.2379"},{"system_id":"supplier","value":"Uddeholm Sverker 21"}],"id":"steel-uddeholm-sverker-21","identity_kind":"standard_grade","name":"Tool steel Uddeholm Sverker 21","notes":"Uddeholm tool steel; each property retains its hardness and heat-treatment condition.","primary_taxon_id":"tool-steels","supplemental_taxon_ids":[]},{"aliases":["207 Grade B","H13","Orvar Supreme","Uddeholm Orvar Supreme"],"designations":[{"system_id":"aisi","value":"H13"},{"system_id":"nadca","value":"207 Grade B"},{"system_id":"supplier","value":"Uddeholm Orvar Supreme"}],"id":"steel-uddeholm-orvar-supreme","identity_kind":"standard_grade","name":"Tool steel Uddeholm Orvar Supreme","notes":"Uddeholm tool steel; each property retains its hardness and heat-treatment condition.","primary_taxon_id":"tool-steels","supplemental_taxon_ids":[]},{"aliases":["420 modified","Stavax ESR","Uddeholm Stavax ESR"],"designations":[{"system_id":"aisi","value":"420 modified"},{"system_id":"supplier","value":"Uddeholm Stavax ESR"}],"id":"steel-uddeholm-stavax-esr","identity_kind":"standard_grade","name":"Tool steel Uddeholm Stavax ESR","notes":"Uddeholm tool steel; each property retains its hardness and heat-treatment condition.","primary_taxon_id":"tool-steels","supplemental_taxon_ids":[]},{"aliases":["1.2358","Carmo","Uddeholm Carmo"],"designations":[{"system_id":"din","value":"1.2358"},{"system_id":"supplier","value":"Uddeholm Carmo"}],"id":"steel-uddeholm-carmo","identity_kind":"standard_grade","name":"Tool steel Uddeholm Carmo","notes":"Uddeholm tool steel; each property retains its hardness and heat-treatment condition.","primary_taxon_id":"tool-steels","supplemental_taxon_ids":[]},{"aliases":["Caldie","Uddeholm Caldie"],"designations":[{"system_id":"supplier","value":"Uddeholm Caldie"}],"id":"steel-uddeholm-caldie","identity_kind":"commercial_grade","name":"Tool steel Uddeholm Caldie","notes":"Uddeholm tool steel; each property retains its hardness and heat-treatment condition.","primary_taxon_id":"tool-steels","supplemental_taxon_ids":[]},{"aliases":["Dievar","Uddeholm Dievar"],"designations":[{"system_id":"supplier","value":"Uddeholm Dievar"}],"id":"steel-uddeholm-dievar","identity_kind":"commercial_grade","name":"Tool steel Uddeholm Dievar","notes":"Uddeholm tool steel; each property retains its hardness and heat-treatment condition.","primary_taxon_id":"tool-steels","supplemental_taxon_ids":[]}],"observations":[{"basis":"minimum","conditions":{"product_form":"extrusion"},"id":"obs-482a4b0df6a9a7f82587","material_id":"al-6061","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":110000000.0},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"MPa","value":110.0}},"source_id":"hydro-6061-2019","source_locator":{"label":"Page 2, table “6061 Extruded Mechanical and Physical Property Limits”, T4 minimum yield strength","page":2},"state_id":"al-6061-t4","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Not specified in the cited datasheet table"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15},"id":"obs-1ba45f5693d201aaf921","material_id":"al-6061","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":155.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":155.0}},"source_id":"hydro-6061-2019","source_locator":{"label":"Page 2, table “6061 Extruded Mechanical and Physical Property Limits”, T4 typical thermal conductivity","page":2},"state_id":"al-6061-t4","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Not specified in the cited datasheet table"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-4acacc882e3dbe3c39ed","material_id":"al-6061","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":2712.630661599906},"kind":"point","reported":{"significant_figures":2,"unit":"lb/in³","value":0.098}},"source_id":"hydro-6061-2019","source_locator":{"label":"Page 2, alloy-wide density above the chemical composition table: 0.098 lb/in³; no temper specified","page":2},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Not specified in the cited datasheet table"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion"},"id":"obs-fd562a821429c26c2fac","material_id":"al-6061","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":240000000.0},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"MPa","value":240.0}},"source_id":"hydro-6061-2019","source_locator":{"label":"Page 2, table “6061 Extruded Mechanical and Physical Property Limits”, T6 minimum yield strength","page":2},"state_id":"al-6061-t6","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Not specified in the cited datasheet table"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15},"id":"obs-ce45c34ba6b45ffacc57","material_id":"al-6061","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":167.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":167.0}},"source_id":"hydro-6061-2019","source_locator":{"label":"Page 2, table “6061 Extruded Mechanical and Physical Property Limits”, T6 typical thermal conductivity","page":2},"state_id":"al-6061-t6","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Not specified in the cited datasheet table"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-c9de5547ad8d4c0a7438","material_id":"tecaran-abs-grey","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1040.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.04}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 1 (TECARAN ABS grey), row Density","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-ad26df2567f44dfee560","material_id":"tecaran-abs-grey","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":1700000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":1700.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 1 (TECARAN ABS grey), row Modulus of elasticity (tensile test)","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-d25ead22f83541fbfc4a","material_id":"tecaran-abs-grey","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":32000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":32.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 1 (TECARAN ABS grey), row Tensile strength","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-f83647f4042456b738d7","material_id":"tecaran-abs-grey","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":32000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":32.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 1 (TECARAN ABS grey), row Tensile strength at yield","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-78eeecbcbb379a3dfc80","material_id":"tecaran-abs-grey","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.49},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":49.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 1 (TECARAN ABS grey), row Elongation at break","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-5f25d58b3442d936df1c","material_id":"tecaran-abs-grey","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":49000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":49.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 1 (TECARAN ABS grey), row Flexural strength","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-d0e1b91a3c656cacf640","material_id":"tecanyl-mt-coloured","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"maximum":1100.0,"minimum":1040.0,"unit":"kg/m^3"},"kind":"interval","reported":{"maximum":1.1,"minimum":1.04,"significant_figures":3,"unit":"g/cm³"}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 2 (TECANYL MT coloured), row Density","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-be1a3ae6d94429701888","material_id":"tecanyl-mt-coloured","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":2400000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":2400.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 2 (TECANYL MT coloured), row Modulus of elasticity (tensile test)","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-6d78ad726142bdd23b9b","material_id":"tecanyl-mt-coloured","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":65000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":65.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 2 (TECANYL MT coloured), row Tensile strength","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-9153f722842e0615f81b","material_id":"tecanyl-mt-coloured","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":67000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":67.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 2 (TECANYL MT coloured), row Tensile strength at yield","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-f17daa1912cb64d79b3a","material_id":"tecanyl-mt-coloured","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.08},"kind":"point","reported":{"significant_figures":1,"unit":"%","value":8.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 2 (TECANYL MT coloured), row Elongation at break","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-8329624356ce48698cb4","material_id":"tecanyl-mt-coloured","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.21},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.21}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 2 (TECANYL MT coloured), row Thermal conductivity","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-901de54c1081329ffa06","material_id":"tecanyl-mt-coloured","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":95000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":95.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 2 (TECANYL MT coloured), row Flexural strength","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-0b00c296d510824baca0","material_id":"tecanyl-gf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1300.0},"kind":"point","reported":{"significant_figures":2,"unit":"g/cm³","value":1.3}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 3 (TECANYL GF30), row Density","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-e10b65501a2d38d4df35","material_id":"tecanyl-gf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":4100000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":4100.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 3 (TECANYL GF30), row Modulus of elasticity (tensile test)","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-1cc822549376c9f8f15a","material_id":"tecanyl-gf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":73000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":73.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 3 (TECANYL GF30), row Tensile strength","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-5c851aa28997053b97f2","material_id":"tecanyl-gf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":73000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":73.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 3 (TECANYL GF30), row Tensile strength at yield","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-89bf39e016d0998a98a3","material_id":"tecanyl-gf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.05},"kind":"point","reported":{"significant_figures":1,"unit":"%","value":5.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 3 (TECANYL GF30), row Elongation at break","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-44362c0afd787a34bf01","material_id":"tecanyl-gf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.28},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.28}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 3 (TECANYL GF30), row Thermal conductivity","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-92cfd8b9c4a30eb26a02","material_id":"tecanyl-gf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":116000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":116.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 3 (TECANYL GF30), row Flexural strength","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-9113247ccc20fd3b54cb","material_id":"tecanyl-731-grey","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1100.0},"kind":"point","reported":{"significant_figures":2,"unit":"g/cm³","value":1.1}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 4 (TECANYL 731 grey), row Density","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-c41657a4c822ed9f29fc","material_id":"tecanyl-731-grey","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":2400000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":2400.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 4 (TECANYL 731 grey), row Modulus of elasticity (tensile test)","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-5afbfc80b3d8cafe06f9","material_id":"tecanyl-731-grey","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":57000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":57.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 4 (TECANYL 731 grey), row Tensile strength","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-d0e1453036596d4c96f7","material_id":"tecanyl-731-grey","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":57000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":57.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 4 (TECANYL 731 grey), row Tensile strength at yield","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-0d13518861a4afc60639","material_id":"tecanyl-731-grey","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.22},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":22.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 4 (TECANYL 731 grey), row Elongation at break","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-afbfa0ede9124bcf7c41","material_id":"tecanyl-731-grey","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.21},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.21}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 4 (TECANYL 731 grey), row Thermal conductivity","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-9110c9fb9378c2c84b51","material_id":"tecanyl-731-grey","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":85000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":85.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 4 (TECANYL 731 grey), row Flexural strength","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-68f5f66d683ffac64e5e","material_id":"tecafine-pmp","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":830.0},"kind":"point","reported":{"significant_figures":2,"unit":"g/cm³","value":0.83}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 5 (TECAFINE PMP), row Density","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-7fb6dbf786c1dff49e25","material_id":"tecafine-pmp","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":1000000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":1000.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 5 (TECAFINE PMP), row Modulus of elasticity (tensile test)","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-bce320ad3d6f5795424f","material_id":"tecafine-pmp","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":26000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":26.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 5 (TECAFINE PMP), row Tensile strength","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-79d38f4f0150afb1dc63","material_id":"tecafine-pmp","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":26000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":26.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 5 (TECAFINE PMP), row Tensile strength at yield","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-e796da12f7af929e0b20","material_id":"tecafine-pmp","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.67},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":67.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 5 (TECAFINE PMP), row Elongation at break","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-3e1421c15c773b677c1f","material_id":"tecafine-pmp","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":31000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":31.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 5 (TECAFINE PMP), row Flexural strength","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-fa753e0e66227b0e8cef","material_id":"tecapro-mt","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":930.0},"kind":"point","reported":{"significant_figures":2,"unit":"g/cm³","value":0.93}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 6 (TECAPRO MT), row Density","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-ce8501443cc89e1160d4","material_id":"tecapro-mt","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":2000000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":2000.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 6 (TECAPRO MT), row Modulus of elasticity (tensile test)","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-4d096e2a405916d15f12","material_id":"tecapro-mt","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":34000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":34.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 6 (TECAPRO MT), row Tensile strength","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-cd9648df82c4c6e4e43d","material_id":"tecapro-mt","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":34000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":34.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 6 (TECAPRO MT), row Tensile strength at yield","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-b1290da5ec2297a14641","material_id":"tecapro-mt","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.67},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":67.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 6 (TECAPRO MT), row Elongation at break","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-ac5416bf46cdb6a9af9c","material_id":"tecapro-mt","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":54000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":54.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 6 (TECAPRO MT), row Flexural strength","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-be60646c0de3ba72c818","material_id":"tecaform-ah-natural","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1410.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.41}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 7 (TECAFORM AH natural), row Density","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-e9a3fc924aadf35cdd15","material_id":"tecaform-ah-natural","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":2800000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":2800.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 7 (TECAFORM AH natural), row Modulus of elasticity (tensile test)","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-cb07983115d764d31b42","material_id":"tecaform-ah-natural","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":67000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":67.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 7 (TECAFORM AH natural), row Tensile strength","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-eb2aa55fa6e27ee0d18b","material_id":"tecaform-ah-natural","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":67000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":67.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 7 (TECAFORM AH natural), row Tensile strength at yield","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-524fda91c8b3b85c1a89","material_id":"tecaform-ah-natural","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.32},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":32.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 7 (TECAFORM AH natural), row Elongation at break","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-d981ce28a7fac3b35c53","material_id":"tecaform-ah-natural","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.39},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.39}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 7 (TECAFORM AH natural), row Thermal conductivity","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-3da47c7aa6455fd36a3d","material_id":"tecaform-ah-natural","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":91000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":91.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 7 (TECAFORM AH natural), row Flexural strength","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-9caef868bf7001593d93","material_id":"tecaform-ah-gf25","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1590.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.59}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 9 (TECAFORM AH GF25), row Density","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-983d8f8da4e8df514686","material_id":"tecaform-ah-gf25","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":4200000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":4200.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 9 (TECAFORM AH GF25), row Modulus of elasticity (tensile test)","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-6b6c95e52aee2c349f6a","material_id":"tecaform-ah-gf25","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":51000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":51.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 9 (TECAFORM AH GF25), row Tensile strength","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-08dc28e84f0cc86c3252","material_id":"tecaform-ah-gf25","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":51000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":51.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 9 (TECAFORM AH GF25), row Tensile strength at yield","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-7cc0ff64ac6b78ff26fa","material_id":"tecaform-ah-gf25","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.12},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":12.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 9 (TECAFORM AH GF25), row Elongation at break","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-833ae1e750b75023f6a5","material_id":"tecaform-ah-gf25","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.47},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.47}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 9 (TECAFORM AH GF25), row Thermal conductivity","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-77776f78b2e79700f9d3","material_id":"tecaform-ah-gf25","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":88000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":88.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 9 (TECAFORM AH GF25), row Flexural strength","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-9d39f6caa499d61f88bc","material_id":"tecaform-ah-els","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1410.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.41}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 10 (TECAFORM AH ELS), row Density","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-0f58c594f34b44cc55f2","material_id":"tecaform-ah-els","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":1800000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":1800.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 10 (TECAFORM AH ELS), row Modulus of elasticity (tensile test)","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-60d550b3eb5ed2c8803a","material_id":"tecaform-ah-els","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":42000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":42.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 10 (TECAFORM AH ELS), row Tensile strength","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-92f1a51e7834e9b1a682","material_id":"tecaform-ah-els","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":42000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":42.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 10 (TECAFORM AH ELS), row Tensile strength at yield","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-181c80c5f2a4fead08fb","material_id":"tecaform-ah-els","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.11},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":11.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 10 (TECAFORM AH ELS), row Elongation at break","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-340801bbc9214bcacb50","material_id":"tecaform-ah-els","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.46},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.46}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 10 (TECAFORM AH ELS), row Thermal conductivity","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-acb56072c55208c59b89","material_id":"tecaform-ah-els","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":56000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":56.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 88, Material standard values, column 10 (TECAFORM AH ELS), row Flexural strength","page":88},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-f318c654fef9e8ca52cd","material_id":"tecaform-ah-sd","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1350.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.35}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 1 (TECAFORM AH SD), row Density","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-ef0c8316a1c55c6c1955","material_id":"tecaform-ah-sd","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":1300000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":1300.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 1 (TECAFORM AH SD), row Modulus of elasticity (tensile test)","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-a78e35ba731c734724dc","material_id":"tecaform-ah-sd","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":39000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":39.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 1 (TECAFORM AH SD), row Tensile strength","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-91ce479003bc8adf3105","material_id":"tecaform-ah-sd","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":39000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":39.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 1 (TECAFORM AH SD), row Tensile strength at yield","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-889cfd36f6375b3b1457","material_id":"tecaform-ah-sd","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.23},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":23.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 1 (TECAFORM AH SD), row Elongation at break","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-e6fb3b8ab14aa742ecfd","material_id":"tecaform-ah-sd","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.3},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.3}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 1 (TECAFORM AH SD), row Thermal conductivity","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-d210c04c34467182e60e","material_id":"tecaform-ah-sd","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":46000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":46.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 1 (TECAFORM AH SD), row Flexural strength","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-86b315a003162b118ee1","material_id":"tecaform-ah-id-blue","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1490.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.49}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 2 (TECAFORM AH ID blue), row Density","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-ff3ba9bc18ab1c422b58","material_id":"tecaform-ah-id-blue","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":3200000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":3200.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 2 (TECAFORM AH ID blue), row Modulus of elasticity (tensile test)","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-ec0764fbe1fd73b96092","material_id":"tecaform-ah-id-blue","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":68000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":68.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 2 (TECAFORM AH ID blue), row Tensile strength","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-3d4567a78c984b43f1ae","material_id":"tecaform-ah-id-blue","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":68000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":68.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 2 (TECAFORM AH ID blue), row Tensile strength at yield","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-d4ba73e4d86a66d339a3","material_id":"tecaform-ah-id-blue","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.1},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":10.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 2 (TECAFORM AH ID blue), row Elongation at break","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-2c67866d633b69338d37","material_id":"tecaform-ah-id-blue","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.39},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.39}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 2 (TECAFORM AH ID blue), row Thermal conductivity","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-10bad260f81816f5f587","material_id":"tecaform-ah-id-blue","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":100000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":100.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 2 (TECAFORM AH ID blue), row Flexural strength","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-034add61eda5b99bcb74","material_id":"tecaform-ah-la","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1360.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.36}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 3 (TECAFORM AH LA), row Density","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-ca8354d70c299a769a9d","material_id":"tecaform-ah-la","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":2100000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":2100.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 3 (TECAFORM AH LA), row Modulus of elasticity (tensile test)","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-e809b74065fc4f620033","material_id":"tecaform-ah-la","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":48000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":48.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 3 (TECAFORM AH LA), row Tensile strength","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-b34fc578de2baa33d441","material_id":"tecaform-ah-la","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":48000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":48.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 3 (TECAFORM AH LA), row Tensile strength at yield","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-ca988193d3ea18c2cd0d","material_id":"tecaform-ah-la","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.09},"kind":"point","reported":{"significant_figures":1,"unit":"%","value":9.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 3 (TECAFORM AH LA), row Elongation at break","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-4e81241e762d06ac089c","material_id":"tecaform-ah-la","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.39},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.39}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 3 (TECAFORM AH LA), row Thermal conductivity","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-572b0d77674989d266cf","material_id":"tecaform-ah-la","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":70000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":70.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 3 (TECAFORM AH LA), row Flexural strength","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-d955d3f135c515ca2ad9","material_id":"tecaform-ah-san","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1410.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.41}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 4 (TECAFORM AH SAN), row Density","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-d628578ec5b9cd620809","material_id":"tecaform-ah-san","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":2900000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":2900.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 4 (TECAFORM AH SAN), row Modulus of elasticity (tensile test)","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-98cc4737dd03822f71b5","material_id":"tecaform-ah-san","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":67000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":67.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 4 (TECAFORM AH SAN), row Tensile strength","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-18b528762e5dd2b6839f","material_id":"tecaform-ah-san","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":69000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":69.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 4 (TECAFORM AH SAN), row Tensile strength at yield","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-0fdaa99800ee4fd8f2f6","material_id":"tecaform-ah-san","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.18},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":18.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 4 (TECAFORM AH SAN), row Elongation at break","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-3bca807038640d357a10","material_id":"tecaform-ah-san","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.39},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.39}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 4 (TECAFORM AH SAN), row Thermal conductivity","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-56d0b21011123df4d8a2","material_id":"tecaform-ah-san","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":93000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":93.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 4 (TECAFORM AH SAN), row Flexural strength","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-d39e015b605c27408975","material_id":"tecaform-ah-mt-coloured","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1410.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.41}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 5 (TECAFORM AH MT coloured), row Density","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-3cdb1c0a7703a2c78f18","material_id":"tecaform-ah-mt-coloured","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":2800000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":2800.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 5 (TECAFORM AH MT coloured), row Modulus of elasticity (tensile test)","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-67b6f89cd1fce0d7c0ac","material_id":"tecaform-ah-mt-coloured","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":69000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":69.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 5 (TECAFORM AH MT coloured), row Tensile strength","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-c9124cb115bf82a158c2","material_id":"tecaform-ah-mt-coloured","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":70000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":70.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 5 (TECAFORM AH MT coloured), row Tensile strength at yield","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-9f507e9f1b6df90d61e3","material_id":"tecaform-ah-mt-coloured","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.3},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":30.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 5 (TECAFORM AH MT coloured), row Elongation at break","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-fde502557626defbf2b8","material_id":"tecaform-ah-mt-coloured","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.39},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.39}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 5 (TECAFORM AH MT coloured), row Thermal conductivity","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-4a246300fce77f083682","material_id":"tecaform-ah-mt-coloured","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":94000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":94.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 5 (TECAFORM AH MT coloured), row Flexural strength","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-6e0582a0ff4dd1abc7d5","material_id":"tecaform-ad","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1430.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.43}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 6 (TECAFORM AD), row Density","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-4dda6f1a13a68bd43f7f","material_id":"tecaform-ad","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":3400000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":3400.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 6 (TECAFORM AD), row Modulus of elasticity (tensile test)","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-8b22aeec54e6e001bed3","material_id":"tecaform-ad","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":79000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":79.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 6 (TECAFORM AD), row Tensile strength","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-17fd02de19eee8d50249","material_id":"tecaform-ad","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":79000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":79.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 6 (TECAFORM AD), row Tensile strength at yield","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-d36ff9faba1e0f8d2d0f","material_id":"tecaform-ad","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.45},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":45.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 6 (TECAFORM AD), row Elongation at break","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-637e77f4a7bfccec9b29","material_id":"tecaform-ad","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.43},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.43}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 6 (TECAFORM AD), row Thermal conductivity","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-fde8962f24aa11aff552","material_id":"tecaform-ad","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":106000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":106.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 6 (TECAFORM AD), row Flexural strength","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-e2d17763bb3d7709ddc1","material_id":"tecaform-ad-af","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1490.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.49}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 8 (TECAFORM AD AF), row Density","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-61ffc8b41e9bce9de2a3","material_id":"tecaform-ad-af","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":3000000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":3000.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 8 (TECAFORM AD AF), row Modulus of elasticity (tensile test)","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-914d37e7d9757aeb1424","material_id":"tecaform-ad-af","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":53000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":53.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 8 (TECAFORM AD AF), row Tensile strength","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-b8790e2f8069d597afb8","material_id":"tecaform-ad-af","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":53000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":53.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 8 (TECAFORM AD AF), row Tensile strength at yield","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-8ccdd108025b65bc97c9","material_id":"tecaform-ad-af","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.08},"kind":"point","reported":{"significant_figures":1,"unit":"%","value":8.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 8 (TECAFORM AD AF), row Elongation at break","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-233bb92fcedb573ae0ab","material_id":"tecaform-ad-af","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.46},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.46}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 8 (TECAFORM AD AF), row Thermal conductivity","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-b476d43524d2653fe8a2","material_id":"tecaform-ad-af","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":85000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":85.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 8 (TECAFORM AD AF), row Flexural strength","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-f59a090f86d93883757f","material_id":"tecast-t","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1150.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.15}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 9 (TECAST T), row Density","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-1fdc16198133daacd086","material_id":"tecast-t","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":3500000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":3500.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 9 (TECAST T), row Modulus of elasticity (tensile test)","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-0e2f95319cf8f8d524ab","material_id":"tecast-t","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":83000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":83.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 9 (TECAST T), row Tensile strength","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-d2e538e1065c5f2c1207","material_id":"tecast-t","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":80000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":80.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 9 (TECAST T), row Tensile strength at yield","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-7e00062653adb48f4207","material_id":"tecast-t","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.55},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":55.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 9 (TECAST T), row Elongation at break","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-549f7d7c86706da11960","material_id":"tecast-t","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.38},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.38}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 9 (TECAST T), row Thermal conductivity","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-899f44a69688a929f002","material_id":"tecast-t","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":109000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":109.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 9 (TECAST T), row Flexural strength","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-3f068642106857616efa","material_id":"tecast-tm","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1150.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.15}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 10 (TECAST TM), row Density","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-0c2cfde12b73a84c4f49","material_id":"tecast-tm","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":3200000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":3200.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 10 (TECAST TM), row Modulus of elasticity (tensile test)","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-aff51a0c9614767cd388","material_id":"tecast-tm","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":82000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":82.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 10 (TECAST TM), row Tensile strength","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-bf1e6d304ee7c7cea8af","material_id":"tecast-tm","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":80000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":80.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 10 (TECAST TM), row Tensile strength at yield","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-631bf34efcdc0f4f75f2","material_id":"tecast-tm","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.55},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":55.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 10 (TECAST TM), row Elongation at break","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-e6e2c658242fb87ac693","material_id":"tecast-tm","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.33},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.33}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 10 (TECAST TM), row Thermal conductivity","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-b795cc82ec5852eccfa3","material_id":"tecast-tm","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":102000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":102.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 89, Material standard values, column 10 (TECAST TM), row Flexural strength","page":89},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-a66ed47cd85f83419ea2","material_id":"tecast-l-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1130.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.13}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 1 (TECAST L black), row Density","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-892cafc15530f29c472c","material_id":"tecast-l-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":2900000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":2900.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 1 (TECAST L black), row Modulus of elasticity (tensile test)","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-474958aec46ebb10bade","material_id":"tecast-l-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":69000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":69.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 1 (TECAST L black), row Tensile strength","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-9a43609d8d6fa934ecf3","material_id":"tecast-l-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":66000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":66.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 1 (TECAST L black), row Tensile strength at yield","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-c22273f7a88cd8e088f9","material_id":"tecast-l-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.5},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":50.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 1 (TECAST L black), row Elongation at break","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-33abbcbdbc5b19f36044","material_id":"tecast-l-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.37},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.37}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 1 (TECAST L black), row Thermal conductivity","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-d4bb9f37dc1e943e3565","material_id":"tecast-l-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":95000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":95.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 1 (TECAST L black), row Flexural strength","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-4f49c80ca3f9487765b6","material_id":"tecaglide-green","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1130.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.13}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 4 (TECAGLIDE green), row Density","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-326f2fcf7b033f77e5e1","material_id":"tecaglide-green","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":3200000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":3200.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 4 (TECAGLIDE green), row Modulus of elasticity (tensile test)","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-226e207157851b3d7fd4","material_id":"tecaglide-green","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":76000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":76.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 4 (TECAGLIDE green), row Tensile strength","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-91e1589defef7c7240eb","material_id":"tecaglide-green","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":76000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":76.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 4 (TECAGLIDE green), row Tensile strength at yield","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-00ea0ac160500a405e19","material_id":"tecaglide-green","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.18},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":18.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 4 (TECAGLIDE green), row Elongation at break","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-16bb196ae7d1e5e52c45","material_id":"tecaglide-green","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.38},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.38}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 4 (TECAGLIDE green), row Thermal conductivity","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-8f483305f31002e51987","material_id":"tecaglide-green","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":103000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":103.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 4 (TECAGLIDE green), row Flexural strength","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-cc5819f7b17e16685e0f","material_id":"tecarim-1500-yellow","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1110.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.11}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 5 (TECARIM 1500 yellow), row Density","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-3ce153b0e3e2eacdd4fc","material_id":"tecarim-1500-yellow","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":2200000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":2200.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 5 (TECARIM 1500 yellow), row Modulus of elasticity (tensile test)","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-a6c262d4fa38102f58e8","material_id":"tecarim-1500-yellow","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":53000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":53.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 5 (TECARIM 1500 yellow), row Tensile strength","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-e2589da08e3d7080ba06","material_id":"tecarim-1500-yellow","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":53000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":53.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 5 (TECARIM 1500 yellow), row Tensile strength at yield","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-1b8f4eb679473c0cc691","material_id":"tecarim-1500-yellow","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.58},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":58.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 5 (TECARIM 1500 yellow), row Elongation at break","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-9b9d8d4853aba3ed7a3b","material_id":"tecarim-1500-yellow","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.32},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.32}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 5 (TECARIM 1500 yellow), row Thermal conductivity","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-d08b81021997692ead49","material_id":"tecarim-1500-yellow","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":73000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":73.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 5 (TECARIM 1500 yellow), row Flexural strength","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-9675e7ca62ff43eef11e","material_id":"tecamid-6","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1140.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.14}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 6 (TECAMID 6), row Density","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-99293a3bdd90b60beddd","material_id":"tecamid-6","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":3300000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":3300.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 6 (TECAMID 6), row Modulus of elasticity (tensile test)","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-16f8ab6b0e1f4ae9d56c","material_id":"tecamid-6","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":79000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":79.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 6 (TECAMID 6), row Tensile strength","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-5ff8f4e4e82c086cf32c","material_id":"tecamid-6","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":78000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":78.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 6 (TECAMID 6), row Tensile strength at yield","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-bb0d1ea3881a307a5fe5","material_id":"tecamid-6","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":1.3},"kind":"point","reported":{"significant_figures":3,"unit":"%","value":130.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 6 (TECAMID 6), row Elongation at break","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-1fa6d2600547d54309fc","material_id":"tecamid-6","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.37},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.37}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 6 (TECAMID 6), row Thermal conductivity","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-3205e67731e150579dca","material_id":"tecamid-6","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":100000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":100.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 6 (TECAMID 6), row Flexural strength","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-6107ee9d6bacd874379a","material_id":"tecam-6-mo-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1140.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.14}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 7 (TECAM 6 MO black), row Density","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-072f9c1375510562f6ab","material_id":"tecam-6-mo-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":3300000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":3300.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 7 (TECAM 6 MO black), row Modulus of elasticity (tensile test)","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-d4e85ac1edba1b93fe5e","material_id":"tecam-6-mo-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":84000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":84.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 7 (TECAM 6 MO black), row Tensile strength","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-4dc128e4f2e854dbf2fd","material_id":"tecam-6-mo-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":82000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":82.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 7 (TECAM 6 MO black), row Tensile strength at yield","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-f7a41c796d816e1a1a18","material_id":"tecam-6-mo-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.37},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":37.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 7 (TECAM 6 MO black), row Elongation at break","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-0ab0d4324856f6d0391b","material_id":"tecam-6-mo-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.37},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.37}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 7 (TECAM 6 MO black), row Thermal conductivity","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-0028f618e03dd54d1897","material_id":"tecam-6-mo-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":110000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":110.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 7 (TECAM 6 MO black), row Flexural strength","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-a88029ade3d21394899a","material_id":"tecamid-6-gf25","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1330.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.33}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 8 (TECAMID 6 GF25), row Density","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-01c63eead4175fd642d5","material_id":"tecamid-6-gf25","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":5100000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":5100.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 8 (TECAMID 6 GF25), row Modulus of elasticity (tensile test)","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-ad3ae2c6fc9fd7c029fc","material_id":"tecamid-6-gf25","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":96000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":96.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 8 (TECAMID 6 GF25), row Tensile strength","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-d27e13b59bd31d3a58f3","material_id":"tecamid-6-gf25","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":96000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":96.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 8 (TECAMID 6 GF25), row Tensile strength at yield","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-3eb625b9da8482d477db","material_id":"tecamid-6-gf25","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.11},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":11.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 8 (TECAMID 6 GF25), row Elongation at break","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-cf7ea4234d8d500b1b6d","material_id":"tecamid-6-gf25","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.4},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.4}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 8 (TECAMID 6 GF25), row Thermal conductivity","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-e602419d43e0ffb50a5f","material_id":"tecamid-6-gf25","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":143000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":143.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 8 (TECAMID 6 GF25), row Flexural strength","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-62e5c66d65b66f38a737","material_id":"tecamid-6-gf30-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1360.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.36}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 9 (TECAMID 6 GF30 black), row Density","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-c00d628e8792fce8db2f","material_id":"tecamid-6-gf30-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":5700000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":5700.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 9 (TECAMID 6 GF30 black), row Modulus of elasticity (tensile test)","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-097740cdcc9b9c2af286","material_id":"tecamid-6-gf30-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":98000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":98.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 9 (TECAMID 6 GF30 black), row Tensile strength","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-f5e7df12803dd54dece2","material_id":"tecamid-6-gf30-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":98000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":98.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 9 (TECAMID 6 GF30 black), row Tensile strength at yield","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-1a3661b56a866d7b6dc0","material_id":"tecamid-6-gf30-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.05},"kind":"point","reported":{"significant_figures":1,"unit":"%","value":5.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 9 (TECAMID 6 GF30 black), row Elongation at break","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-2d0bde33d13547f3b555","material_id":"tecamid-6-gf30-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.41},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.41}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 9 (TECAMID 6 GF30 black), row Thermal conductivity","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-c0629e73b64052fcdc91","material_id":"tecamid-6-gf30-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":140000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":140.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 9 (TECAMID 6 GF30 black), row Flexural strength","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-aafba552a1ebae4d52f7","material_id":"tecamid-66","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1150.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.15}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 10 (TECAMID 66), row Density","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-1004089f7ae50d9e0188","material_id":"tecamid-66","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":3500000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":3500.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 10 (TECAMID 66), row Modulus of elasticity (tensile test)","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-ba0a0a22021ab6b28af9","material_id":"tecamid-66","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":85000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":85.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 10 (TECAMID 66), row Tensile strength","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-5750ec0d50140680ad02","material_id":"tecamid-66","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":84000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":84.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 10 (TECAMID 66), row Tensile strength at yield","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-0f14453a637ba2ea91be","material_id":"tecamid-66","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.7000000000000001},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":70.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 10 (TECAMID 66), row Elongation at break","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-660f2f55fdc8baa006a8","material_id":"tecamid-66","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.36},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.36}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 10 (TECAMID 66), row Thermal conductivity","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-7c5f2e8e7406b8fa2361","material_id":"tecamid-66","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":110000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":110.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 90, Material standard values, column 10 (TECAMID 66), row Flexural strength","page":90},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-109ad5fa0f0db0401ed8","material_id":"tecamid-66-mh","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1150.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.15}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 1 (TECAMID 66 MH), row Density","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-088c53f73180c8830491","material_id":"tecamid-66-mh","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":3200000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":3200.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 1 (TECAMID 66 MH), row Modulus of elasticity (tensile test)","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-29b2928f03e0b9c21e05","material_id":"tecamid-66-mh","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":84000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":84.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 1 (TECAMID 66 MH), row Tensile strength","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-bc417d351ec394c0d517","material_id":"tecamid-66-mh","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":83000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":83.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 1 (TECAMID 66 MH), row Tensile strength at yield","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-62efe838a35812fbba5a","material_id":"tecamid-66-mh","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.4},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":40.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 1 (TECAMID 66 MH), row Elongation at break","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-5a9c76a950191417aa29","material_id":"tecamid-66-mh","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.36},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.36}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 1 (TECAMID 66 MH), row Thermal conductivity","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-9382a0a829fb29e137f5","material_id":"tecamid-66-mh","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":114000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":114.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 1 (TECAMID 66 MH), row Flexural strength","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-50c34d6fdc4537573496","material_id":"tecamid-66-gf30-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1340.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.34}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 2 (TECAMID 66 GF30 black), row Density","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-b98c3c9575d2cde4794e","material_id":"tecamid-66-gf30-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":5500000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":5500.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 2 (TECAMID 66 GF30 black), row Modulus of elasticity (tensile test)","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-4d991d68817bfa2028af","material_id":"tecamid-66-gf30-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":91000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":91.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 2 (TECAMID 66 GF30 black), row Tensile strength","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-35fce41c4c6b0018e757","material_id":"tecamid-66-gf30-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":91000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":91.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 2 (TECAMID 66 GF30 black), row Tensile strength at yield","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-9efbe4e2a797ddc021a3","material_id":"tecamid-66-gf30-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.14},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":14.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 2 (TECAMID 66 GF30 black), row Elongation at break","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-220b49a33d2e907e98d2","material_id":"tecamid-66-gf30-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.39},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.39}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 2 (TECAMID 66 GF30 black), row Thermal conductivity","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-0754bee98c727e35ae7a","material_id":"tecamid-66-gf30-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":135000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":135.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 2 (TECAMID 66 GF30 black), row Flexural strength","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-d9c0135d79b758e48775","material_id":"tecamid-66-cf20-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1230.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.23}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 3 (TECAMID 66 CF20 black), row Density","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-0318c6539ecda9016b53","material_id":"tecamid-66-cf20-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":5100000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":5100.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 3 (TECAMID 66 CF20 black), row Modulus of elasticity (tensile test)","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-e48da4b39b3d09726ff4","material_id":"tecamid-66-cf20-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":104000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":104.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 3 (TECAMID 66 CF20 black), row Tensile strength","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-91738f21700f12f66503","material_id":"tecamid-66-cf20-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":104000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":104.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 3 (TECAMID 66 CF20 black), row Tensile strength at yield","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-d3325f2234484ff91526","material_id":"tecamid-66-cf20-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.13},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":13.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 3 (TECAMID 66 CF20 black), row Elongation at break","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-261acc703c641768b302","material_id":"tecamid-66-cf20-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.72},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.72}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 3 (TECAMID 66 CF20 black), row Thermal conductivity","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-d8561e1e6c94e3e3e3f5","material_id":"tecamid-66-cf20-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":135000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":135.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 3 (TECAMID 66 CF20 black), row Flexural strength","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-818dc14c6da432c58914","material_id":"tecamid-66-hi","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1150.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.15}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 4 (TECAMID 66 HI), row Density","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-591ee53917541510ea3a","material_id":"tecamid-66-hi","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":3400000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":3400.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 4 (TECAMID 66 HI), row Modulus of elasticity (tensile test)","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-3817d1b3dbf0a21c6dea","material_id":"tecamid-66-hi","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":89000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":89.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 4 (TECAMID 66 HI), row Tensile strength","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-a9c9f173fa131298263d","material_id":"tecamid-66-hi","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":72000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":72.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 4 (TECAMID 66 HI), row Tensile strength at yield","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-1189d9b1b021457648e9","material_id":"tecamid-66-hi","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.25},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":25.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 4 (TECAMID 66 HI), row Elongation at break","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-1140f46458a2441d07f7","material_id":"tecamid-66-hi","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.36},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.36}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 4 (TECAMID 66 HI), row Thermal conductivity","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-e499ff8cd4471a9e900c","material_id":"tecamid-66-hi","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":112000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":112.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 4 (TECAMID 66 HI), row Flexural strength","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-134d2448602fc8d1ce03","material_id":"tecamid-66-la","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1110.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.11}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 5 (TECAMID 66 LA), row Density","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-e6841d4e061486354b9f","material_id":"tecamid-66-la","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":3100000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":3100.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 5 (TECAMID 66 LA), row Modulus of elasticity (tensile test)","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-73546f7b0989c3d83813","material_id":"tecamid-66-la","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":76000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":76.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 5 (TECAMID 66 LA), row Tensile strength","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-b0e376535bb4e29bdcf5","material_id":"tecamid-66-la","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":76000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":76.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 5 (TECAMID 66 LA), row Tensile strength at yield","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-ab8c3e58f2d7507defcc","material_id":"tecamid-66-la","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.14},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":14.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 5 (TECAMID 66 LA), row Elongation at break","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-73004fa697ccf7549fb7","material_id":"tecamid-66-la","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.36},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.36}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 5 (TECAMID 66 LA), row Thermal conductivity","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-e07a7b39b86fddc1f876","material_id":"tecamid-66-la","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":102000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":102.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 5 (TECAMID 66 LA), row Flexural strength","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-0bb134401e2328f4109d","material_id":"tecamid-66-x-gf50","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1610.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.61}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 6 (TECAMID 66/X GF50), row Density","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-48529e132cf77c66b2ce","material_id":"tecamid-66-x-gf50","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":8700000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":8700.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 6 (TECAMID 66/X GF50), row Modulus of elasticity (tensile test)","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-9ee7412aa9dfe5c89b8d","material_id":"tecamid-66-x-gf50","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":115000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":115.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 6 (TECAMID 66/X GF50), row Tensile strength","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-aab7e7e634064fd8eb59","material_id":"tecamid-66-x-gf50","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":115000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":115.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 6 (TECAMID 66/X GF50), row Tensile strength at yield","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-cd957e7d8fdf825e8ca1","material_id":"tecamid-66-x-gf50","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.02},"kind":"point","reported":{"significant_figures":1,"unit":"%","value":2.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 6 (TECAMID 66/X GF50), row Elongation at break","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-4df8af22570455539cc9","material_id":"tecamid-66-x-gf50","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":200000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":200.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 6 (TECAMID 66/X GF50), row Flexural strength","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-27bafbe847d440b31554","material_id":"tecamid-46-redbrown","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1190.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.19}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 7 (TECAMID 46 redbrown), row Density","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-a3f0499156803f369bc0","material_id":"tecamid-46-redbrown","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":3300000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":3300.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 7 (TECAMID 46 redbrown), row Modulus of elasticity (tensile test)","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-01b4c3dcd4db683db146","material_id":"tecamid-46-redbrown","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":106000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":106.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 7 (TECAMID 46 redbrown), row Tensile strength","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-6fbf0756ea8c8ed3c0c2","material_id":"tecamid-46-redbrown","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":106000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":106.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 7 (TECAMID 46 redbrown), row Tensile strength at yield","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-ec9b5e10bb2f1f815e05","material_id":"tecamid-46-redbrown","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.32},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":32.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 7 (TECAMID 46 redbrown), row Elongation at break","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-583c547392adb1f65320","material_id":"tecamid-46-redbrown","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.37},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.37}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 7 (TECAMID 46 redbrown), row Thermal conductivity","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-dd7e09bb11cf2be540a3","material_id":"tecamid-46-redbrown","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":132000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":132.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 7 (TECAMID 46 redbrown), row Flexural strength","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-3823d3752ba509dd6253","material_id":"tecamid-12","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1020.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.02}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 8 (TECAMID 12), row Density","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-bb36288526eef8918630","material_id":"tecamid-12","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":1800000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":1800.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 8 (TECAMID 12), row Modulus of elasticity (tensile test)","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-f665eea0a767bb7d6a24","material_id":"tecamid-12","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":53000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":53.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 8 (TECAMID 12), row Tensile strength","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-a4353907e33dad7ff75c","material_id":"tecamid-12","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":54000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":54.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 8 (TECAMID 12), row Tensile strength at yield","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-4ee9ac415d83f0ab2fbc","material_id":"tecamid-12","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":2.0},"kind":"point","reported":{"significant_figures":3,"unit":"%","value":200.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 8 (TECAMID 12), row Elongation at break","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-fc24af25c8a354afda12","material_id":"tecamid-12","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.3},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.3}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 8 (TECAMID 12), row Thermal conductivity","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-b35bd1d25b1ee712a9f5","material_id":"tecamid-12","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":68000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":68.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 8 (TECAMID 12), row Flexural strength","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-87e00e160919f4606930","material_id":"tecapet","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1360.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.36}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 9 (TECAPET), row Density","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-3c630f427fe8f67e3883","material_id":"tecapet","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":3100000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":3100.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 9 (TECAPET), row Modulus of elasticity (tensile test)","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-71db7844ce19658f648f","material_id":"tecapet","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":79000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":79.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 9 (TECAPET), row Tensile strength","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-626334923ea9dbf32f47","material_id":"tecapet","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":79000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":79.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 9 (TECAPET), row Tensile strength at yield","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-e39c126b41a78ffea3f8","material_id":"tecapet","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.1},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":10.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 9 (TECAPET), row Elongation at break","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-712f7694703c5a67c3c5","material_id":"tecapet","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":121000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":121.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 91, Material standard values, column 9 (TECAPET), row Flexural strength","page":91},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-65484fbb03e270afa458","material_id":"tecapet-tf","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1430.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.43}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 1 (TECAPET TF), row Density","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-e0071d31927bbf52b6d2","material_id":"tecapet-tf","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":3200000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":3200.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 1 (TECAPET TF), row Modulus of elasticity (tensile test)","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-1e7d3157cd3c46691412","material_id":"tecapet-tf","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":78000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":78.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 1 (TECAPET TF), row Tensile strength","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-19ed7f4b0f77da537a9a","material_id":"tecapet-tf","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":78000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":78.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 1 (TECAPET TF), row Tensile strength at yield","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-11c5ba82e7f32c4c3bd4","material_id":"tecapet-tf","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.06},"kind":"point","reported":{"significant_figures":1,"unit":"%","value":6.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 1 (TECAPET TF), row Elongation at break","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-1994ca273da1e7f4ff59","material_id":"tecapet-tf","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":119000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":119.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 1 (TECAPET TF), row Flexural strength","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-a5029ced468cd704ba0f","material_id":"tecadur-pet","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1390.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.39}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 2 (TECADUR PET), row Density","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-6535a1cce32fe86a7bb3","material_id":"tecadur-pet","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":3300000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":3300.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 2 (TECADUR PET), row Modulus of elasticity (tensile test)","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-686e6f7a95b916bcfb8b","material_id":"tecadur-pet","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":91000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":91.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 2 (TECADUR PET), row Tensile strength","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-6039d2f8cc6a74a312e7","material_id":"tecadur-pet","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":91000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":91.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 2 (TECADUR PET), row Tensile strength at yield","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-0c4e13425e238578e845","material_id":"tecadur-pet","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.14},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":14.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 2 (TECADUR PET), row Elongation at break","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-62a46e2dc68c2bbfe084","material_id":"tecadur-pet","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":134000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":134.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 2 (TECADUR PET), row Flexural strength","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-0fd5b787ec05a5b8ed62","material_id":"tecadur-pbt-gf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1460.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.46}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 3 (TECADUR PBT GF30), row Density","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-a8c970b042021a8b51f5","material_id":"tecadur-pbt-gf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":3400000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":3400.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 3 (TECADUR PBT GF30), row Modulus of elasticity (tensile test)","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-749a2330a986b7e30ab7","material_id":"tecadur-pbt-gf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":46000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":46.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 3 (TECADUR PBT GF30), row Tensile strength","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-450e56931e5a6aba727e","material_id":"tecadur-pbt-gf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":46000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":46.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 3 (TECADUR PBT GF30), row Tensile strength at yield","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-3a561bf08beca42fbb7e","material_id":"tecadur-pbt-gf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.06},"kind":"point","reported":{"significant_figures":1,"unit":"%","value":6.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 3 (TECADUR PBT GF30), row Elongation at break","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-582c4e1c18477914139a","material_id":"tecadur-pbt-gf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.33},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.33}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 3 (TECADUR PBT GF30), row Thermal conductivity","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-f13349794c0330466031","material_id":"tecadur-pbt-gf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":78000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":78.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 3 (TECADUR PBT GF30), row Flexural strength","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-62dbcbb77f5ec1b5726e","material_id":"tecanat","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1190.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.19}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 4 (TECANAT), row Density","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-104aefbdc20f663be2f8","material_id":"tecanat","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":2200000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":2200.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 4 (TECANAT), row Modulus of elasticity (tensile test)","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-e13bd836feeb2740f43c","material_id":"tecanat","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":69000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":69.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 4 (TECANAT), row Tensile strength","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-5eb6fdeee9265af1cc88","material_id":"tecanat","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":69000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":69.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 4 (TECANAT), row Tensile strength at yield","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-7a9e1605e34b4f77f440","material_id":"tecanat","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.9},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":90.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 4 (TECANAT), row Elongation at break","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-58172d0c5184baef4762","material_id":"tecanat","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.25},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.25}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 4 (TECANAT), row Thermal conductivity","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-c5e8ff6e94f11bfe9353","material_id":"tecanat","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":97000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":97.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 4 (TECANAT), row Flexural strength","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-0fcebb4cbe253bcc9e49","material_id":"tecanat-gf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1420.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.42}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 5 (TECANAT GF30), row Density","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-66a0a7a65a6ae28ff199","material_id":"tecanat-gf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":4400000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":4400.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 5 (TECANAT GF30), row Modulus of elasticity (tensile test)","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-80470019191755a513d8","material_id":"tecanat-gf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":85000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":85.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 5 (TECANAT GF30), row Tensile strength","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-138d0b44cf7c2655c9d9","material_id":"tecanat-gf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":87000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":87.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 5 (TECANAT GF30), row Tensile strength at yield","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-ad14a07761bbbb64cc9d","material_id":"tecanat-gf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.06},"kind":"point","reported":{"significant_figures":1,"unit":"%","value":6.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 5 (TECANAT GF30), row Elongation at break","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-df941f7a2b7f44c85c94","material_id":"tecanat-gf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.32},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.32}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 5 (TECANAT GF30), row Thermal conductivity","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-101638479a521386f89c","material_id":"tecanat-gf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":138000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":138.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 5 (TECANAT GF30), row Flexural strength","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-cfc2be1fb28fa818b7af","material_id":"tecaflon-pvdf","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1780.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.78}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 6 (TECAFLON PVDF), row Density","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-453ea8266edb9e214d39","material_id":"tecaflon-pvdf","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":2200000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":2200.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 6 (TECAFLON PVDF), row Modulus of elasticity (tensile test)","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-30300380013a8911ddfc","material_id":"tecaflon-pvdf","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":62000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":62.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 6 (TECAFLON PVDF), row Tensile strength","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-a5fb3595cac60510fbc9","material_id":"tecaflon-pvdf","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":62000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":62.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 6 (TECAFLON PVDF), row Tensile strength at yield","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-992e073c344b6163ad0e","material_id":"tecaflon-pvdf","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.17},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":17.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 6 (TECAFLON PVDF), row Elongation at break","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-708bfca73525c65c7123","material_id":"tecaflon-pvdf","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.25},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.25}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 6 (TECAFLON PVDF), row Thermal conductivity","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-ca7fe1733a6a29d76510","material_id":"tecaflon-pvdf","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":77000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":77.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 6 (TECAFLON PVDF), row Flexural strength","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-bc5403f20190d0de0efe","material_id":"tecason-s","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1240.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.24}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 7 (TECASON S), row Density","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-b8fae2b0d180f91d6a4a","material_id":"tecason-s","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":2700000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":2700.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 7 (TECASON S), row Modulus of elasticity (tensile test)","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-c3ac41c57738893c5fe9","material_id":"tecason-s","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":89000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":89.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 7 (TECASON S), row Tensile strength","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-35dc4cc18d264ece3f89","material_id":"tecason-s","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":89000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":89.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 7 (TECASON S), row Tensile strength at yield","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-2b7fd1de800ed85d5a50","material_id":"tecason-s","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.15},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":15.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 7 (TECASON S), row Elongation at break","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-ece1fb72ba9e179750fd","material_id":"tecason-s","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.21},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.21}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 7 (TECASON S), row Thermal conductivity","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-4e2abd5af1b91f9bad37","material_id":"tecason-s","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":122000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":122.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 7 (TECASON S), row Flexural strength","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-a5b118e7b1b0faabe629","material_id":"tecapei","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1280.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.28}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 8 (TECAPEI), row Density","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-54c5c08184f9ef98211e","material_id":"tecapei","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":3200000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":3200.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 8 (TECAPEI), row Modulus of elasticity (tensile test)","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-84306fa61f48b42a95c7","material_id":"tecapei","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":127000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":127.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 8 (TECAPEI), row Tensile strength","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-3146109e46434205c816","material_id":"tecapei","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":127000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":127.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 8 (TECAPEI), row Tensile strength at yield","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-2aa11a8166dd621f6956","material_id":"tecapei","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.35000000000000003},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":35.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 8 (TECAPEI), row Elongation at break","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-da4aa36350d2d87320de","material_id":"tecapei","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.21},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.21}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 8 (TECAPEI), row Thermal conductivity","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-cc0e38516e144f309c38","material_id":"tecapei","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":164000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":164.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 8 (TECAPEI), row Flexural strength","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-7e218a08bb0ed0099a1b","material_id":"tecason-p","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1310.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.31}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 9 (TECASON P), row Density","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-e04ad846f5213429d0f4","material_id":"tecason-p","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":2300000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":2300.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 9 (TECASON P), row Modulus of elasticity (tensile test)","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-3e1913e9d7f4779d4d28","material_id":"tecason-p","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":81000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":81.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 9 (TECASON P), row Tensile strength","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-72df3119013dff085638","material_id":"tecason-p","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":81000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":81.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 9 (TECASON P), row Tensile strength at yield","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-758778922df84b1ad26e","material_id":"tecason-p","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.5},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":50.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 9 (TECASON P), row Elongation at break","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-10b0c2003e8cc7f17ef8","material_id":"tecason-p","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.25},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.25}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 9 (TECASON P), row Thermal conductivity","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-7be93f2e6cc13d8fd14b","material_id":"tecason-p","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":107000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":107.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 9 (TECASON P), row Flexural strength","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-04f18c5da05aa5aa2633","material_id":"tecason-p-mt-coloured","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1310.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.31}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 10 (TECASON P MT coloured), row Density","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-3fcacaa3b72f0d338b24","material_id":"tecason-p-mt-coloured","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":2300000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":2300.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 10 (TECASON P MT coloured), row Modulus of elasticity (tensile test)","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-16dad00507ec31979748","material_id":"tecason-p-mt-coloured","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":81000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":81.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 10 (TECASON P MT coloured), row Tensile strength","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-2f842dd11b825d841ccd","material_id":"tecason-p-mt-coloured","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":81000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":81.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 10 (TECASON P MT coloured), row Tensile strength at yield","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-ca869ba8c3f2dfc46d6f","material_id":"tecason-p-mt-coloured","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.5},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":50.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 10 (TECASON P MT coloured), row Elongation at break","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-1a46f5c06665fe18f5e4","material_id":"tecason-p-mt-coloured","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.25},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.25}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 10 (TECASON P MT coloured), row Thermal conductivity","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-b1775c2d0e57cf8e0aa5","material_id":"tecason-p-mt-coloured","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":107000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":107.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 92, Material standard values, column 10 (TECASON P MT coloured), row Flexural strength","page":92},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-4916254782c3f143e834","material_id":"tecatron","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1360.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.36}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 1 (TECATRON), row Density","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-bc223b87c1160e0f4ab3","material_id":"tecatron","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":4100000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":4100.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 1 (TECATRON), row Modulus of elasticity (tensile test)","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-7fd0d11031ccf2f58609","material_id":"tecatron","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":102000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":102.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 1 (TECATRON), row Tensile strength","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-46a6953f0c87cd04a19b","material_id":"tecatron","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":100000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":100.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 1 (TECATRON), row Tensile strength at yield","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-9078a810691db8d7766f","material_id":"tecatron","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.04},"kind":"point","reported":{"significant_figures":1,"unit":"%","value":4.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 1 (TECATRON), row Elongation at break","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-d5e98bf6742e28efde25","material_id":"tecatron","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.25},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.25}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 1 (TECATRON), row Thermal conductivity","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-6dfeccb4635fad968611","material_id":"tecatron","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":151000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":151.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 1 (TECATRON), row Flexural strength","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-008c3fbcc1af16b79409","material_id":"tecatron-gf40","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1630.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.63}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 2 (TECATRON GF40), row Density","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-9afc5b210004185cffc9","material_id":"tecatron-gf40","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":6500000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":6500.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 2 (TECATRON GF40), row Modulus of elasticity (tensile test)","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-a5258b1bf0cf79ee4cdb","material_id":"tecatron-gf40","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":83000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":83.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 2 (TECATRON GF40), row Tensile strength","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-cf980d56bed16508f80e","material_id":"tecatron-gf40","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":83000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":83.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 2 (TECATRON GF40), row Tensile strength at yield","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-bd63fb08ce665e6f38e0","material_id":"tecatron-gf40","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.03},"kind":"point","reported":{"significant_figures":1,"unit":"%","value":3.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 2 (TECATRON GF40), row Elongation at break","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-beb0699a8aca5f72a374","material_id":"tecatron-gf40","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.35},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.35}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 2 (TECATRON GF40), row Thermal conductivity","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-2330333ddfaf2d5d3dc8","material_id":"tecatron-gf40","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":145000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":145.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 2 (TECATRON GF40), row Flexural strength","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-61b744cd58ad72c33999","material_id":"tecatron-pvx","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1500.0},"kind":"point","reported":{"significant_figures":2,"unit":"g/cm³","value":1.5}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 4 (TECATRON PVX), row Density","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-60cf2cc4544807bb0b2a","material_id":"tecatron-pvx","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":4600000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":4600.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 4 (TECATRON PVX), row Modulus of elasticity (tensile test)","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-cb5764d703586d674be6","material_id":"tecatron-pvx","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":53000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":53.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 4 (TECATRON PVX), row Tensile strength","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-120ffbadfa8fc38ffc51","material_id":"tecatron-pvx","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":53000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":53.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 4 (TECATRON PVX), row Tensile strength at yield","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-c9109616b34e36f9068b","material_id":"tecatron-pvx","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.02},"kind":"point","reported":{"significant_figures":1,"unit":"%","value":2.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 4 (TECATRON PVX), row Elongation at break","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-a57ee84d383c5ccb4bfe","material_id":"tecatron-pvx","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.58},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.58}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 4 (TECATRON PVX), row Thermal conductivity","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-e613937de9c6e3490cd0","material_id":"tecatron-pvx","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":91000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":91.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 4 (TECATRON PVX), row Flexural strength","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-944a33e72da58e83ce0d","material_id":"tecapeek","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1310.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.31}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 5 (TECAPEEK), row Density","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-7c7ad601a9e71477be44","material_id":"tecapeek","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":4200000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":4200.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 5 (TECAPEEK), row Modulus of elasticity (tensile test)","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-da8871cfc635d7659d5c","material_id":"tecapeek","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":116000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":116.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 5 (TECAPEEK), row Tensile strength","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-b3f0d529a50eac3c0951","material_id":"tecapeek","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":116000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":116.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 5 (TECAPEEK), row Tensile strength at yield","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-d121d6414a193cace8cc","material_id":"tecapeek","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.15},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":15.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 5 (TECAPEEK), row Elongation at break","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-fad5528bebb0e68faa2e","material_id":"tecapeek","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.27},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.27}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 5 (TECAPEEK), row Thermal conductivity","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-8038570b1bec65002489","material_id":"tecapeek","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":175000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":175.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 5 (TECAPEEK), row Flexural strength","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-54ea618b46293d10fc58","material_id":"tecapeek-gf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1530.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.53}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 8 (TECAPEEK GF30), row Density","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-834bc8b446326c7c30cd","material_id":"tecapeek-gf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":6400000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":6400.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 8 (TECAPEEK GF30), row Modulus of elasticity (tensile test)","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-3b3b3f9a97bf72999bc6","material_id":"tecapeek-gf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":105000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":105.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 8 (TECAPEEK GF30), row Tensile strength","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-b60fae5ef5fe404d2341","material_id":"tecapeek-gf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":105000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":105.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 8 (TECAPEEK GF30), row Tensile strength at yield","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-c7cf2a35936187944814","material_id":"tecapeek-gf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.03},"kind":"point","reported":{"significant_figures":1,"unit":"%","value":3.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 8 (TECAPEEK GF30), row Elongation at break","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-12a670c15f58cb1f5303","material_id":"tecapeek-gf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.35},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.35}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 8 (TECAPEEK GF30), row Thermal conductivity","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-9fb45960dc4728100153","material_id":"tecapeek-gf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":164000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":164.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 8 (TECAPEEK GF30), row Flexural strength","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-616deb5a5a79c1ad69ac","material_id":"tecapeek-cf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1380.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.38}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 9 (TECAPEEK CF30), row Density","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-2a5ea5b5d3650a97af2b","material_id":"tecapeek-cf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":6800000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":6800.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 9 (TECAPEEK CF30), row Modulus of elasticity (tensile test)","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-26b8f996b8359285b801","material_id":"tecapeek-cf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":122000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":122.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 9 (TECAPEEK CF30), row Tensile strength","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-41386f472e3a7ac12d6d","material_id":"tecapeek-cf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":122000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":122.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 9 (TECAPEEK CF30), row Tensile strength at yield","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-1cd7fec4505f48fabd2c","material_id":"tecapeek-cf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.07},"kind":"point","reported":{"significant_figures":1,"unit":"%","value":7.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 9 (TECAPEEK CF30), row Elongation at break","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-6e5c0c9d68f9f82b0d84","material_id":"tecapeek-cf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.66},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.66}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 9 (TECAPEEK CF30), row Thermal conductivity","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-0551e4301e2040e81357","material_id":"tecapeek-cf30","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":193000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":193.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 9 (TECAPEEK CF30), row Flexural strength","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-36ee7b8d505993f35023","material_id":"tecapeek-pvx","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1440.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.44}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 10 (TECAPEEK PVX), row Density","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-5b46ff03667203761100","material_id":"tecapeek-pvx","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":5500000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":5500.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 10 (TECAPEEK PVX), row Modulus of elasticity (tensile test)","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-1b2ef9026c0cebe59f4c","material_id":"tecapeek-pvx","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":84000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":84.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 10 (TECAPEEK PVX), row Tensile strength","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-02ae1585eb7e629d433c","material_id":"tecapeek-pvx","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":84000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":84.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 10 (TECAPEEK PVX), row Tensile strength at yield","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-61c66cd4ee2eb05021fe","material_id":"tecapeek-pvx","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.03},"kind":"point","reported":{"significant_figures":1,"unit":"%","value":3.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 10 (TECAPEEK PVX), row Elongation at break","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-47a678a8ed65431f8fdc","material_id":"tecapeek-pvx","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.82},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.82}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 10 (TECAPEEK PVX), row Thermal conductivity","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-6652d25bffd439d5fe83","material_id":"tecapeek-pvx","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":142000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":142.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 93, Material standard values, column 10 (TECAPEEK PVX), row Flexural strength","page":93},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-987ef8249631e25c34d8","material_id":"tecapeek-els-nano","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1360.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.36}},"source_id":"ensinger-manual","source_locator":{"label":"Page 94, Material standard values, column 1 (TECAPEEK ELS nano), row Density","page":94},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-0b3af8609a6ca00b5ee9","material_id":"tecapeek-els-nano","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":4800000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":4800.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 94, Material standard values, column 1 (TECAPEEK ELS nano), row Modulus of elasticity (tensile test)","page":94},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-9e48605e3991db402d91","material_id":"tecapeek-els-nano","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":106000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":106.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 94, Material standard values, column 1 (TECAPEEK ELS nano), row Tensile strength","page":94},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-7895e76ced1a0290a847","material_id":"tecapeek-els-nano","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":106000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":106.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 94, Material standard values, column 1 (TECAPEEK ELS nano), row Tensile strength at yield","page":94},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-44f7f0e1a026aaaf6bd4","material_id":"tecapeek-els-nano","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.04},"kind":"point","reported":{"significant_figures":1,"unit":"%","value":4.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 94, Material standard values, column 1 (TECAPEEK ELS nano), row Elongation at break","page":94},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-b745b98321e67afc0379","material_id":"tecapeek-els-nano","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.46},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.46}},"source_id":"ensinger-manual","source_locator":{"label":"Page 94, Material standard values, column 1 (TECAPEEK ELS nano), row Thermal conductivity","page":94},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-d75b72febe290ffe6388","material_id":"tecapeek-els-nano","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":178000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":178.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 94, Material standard values, column 1 (TECAPEEK ELS nano), row Flexural strength","page":94},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-0277f35c6818e924a932","material_id":"tecapeek-tf10","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1380.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.38}},"source_id":"ensinger-manual","source_locator":{"label":"Page 94, Material standard values, column 2 (TECAPEEK TF10), row Density","page":94},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-eac65dbfe73ec1ff1ace","material_id":"tecapeek-tf10","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":3400000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":3400.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 94, Material standard values, column 2 (TECAPEEK TF10), row Modulus of elasticity (tensile test)","page":94},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-2f0de8ccf71aa8f275dc","material_id":"tecapeek-tf10","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":95000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":95.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 94, Material standard values, column 2 (TECAPEEK TF10), row Tensile strength","page":94},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-69fdf474e2f71176710f","material_id":"tecapeek-tf10","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":95000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":95.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 94, Material standard values, column 2 (TECAPEEK TF10), row Tensile strength at yield","page":94},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-279bfcce6144089b72e4","material_id":"tecapeek-tf10","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.08},"kind":"point","reported":{"significant_figures":1,"unit":"%","value":8.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 94, Material standard values, column 2 (TECAPEEK TF10), row Elongation at break","page":94},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-9d225e04144b159bc480","material_id":"tecapeek-tf10","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":149000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":149.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 94, Material standard values, column 2 (TECAPEEK TF10), row Flexural strength","page":94},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-d16338552a39192bd5be","material_id":"tecapeek-id-blue","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1490.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.49}},"source_id":"ensinger-manual","source_locator":{"label":"Page 94, Material standard values, column 3 (TECAPEEK ID blue), row Density","page":94},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-8ab7e2f87dcde2023d25","material_id":"tecapeek-id-blue","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":4600000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":4600.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 94, Material standard values, column 3 (TECAPEEK ID blue), row Modulus of elasticity (tensile test)","page":94},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-8e8fd63e1ccf3ef5dfd8","material_id":"tecapeek-id-blue","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":111000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":111.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 94, Material standard values, column 3 (TECAPEEK ID blue), row Tensile strength","page":94},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-9b43b0a5ab62da1c42d2","material_id":"tecapeek-id-blue","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":111000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":111.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 94, Material standard values, column 3 (TECAPEEK ID blue), row Tensile strength at yield","page":94},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-6c330c0bf3a864fbceaa","material_id":"tecapeek-id-blue","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.06},"kind":"point","reported":{"significant_figures":1,"unit":"%","value":6.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 94, Material standard values, column 3 (TECAPEEK ID blue), row Elongation at break","page":94},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-10458abbaadbc6d1cb04","material_id":"tecapeek-id-blue","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.27},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.27}},"source_id":"ensinger-manual","source_locator":{"label":"Page 94, Material standard values, column 3 (TECAPEEK ID blue), row Thermal conductivity","page":94},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-4ca58843a46a889d5bb2","material_id":"tecapeek-id-blue","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":166000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":166.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 94, Material standard values, column 3 (TECAPEEK ID blue), row Flexural strength","page":94},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-965a7f7b127c9a1aad72","material_id":"tecapeek-mt","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1310.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.31}},"source_id":"ensinger-manual","source_locator":{"label":"Page 94, Material standard values, column 4 (TECAPEEK MT), row Density","page":94},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-e5b6a8259df5a0cb57e6","material_id":"tecapeek-mt","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":4200000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":4200.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 94, Material standard values, column 4 (TECAPEEK MT), row Modulus of elasticity (tensile test)","page":94},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-c4220ce5710f66ef406e","material_id":"tecapeek-mt","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":116000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":116.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 94, Material standard values, column 4 (TECAPEEK MT), row Tensile strength","page":94},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-92e9c26aa4c8413fe455","material_id":"tecapeek-mt","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":116000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":116.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 94, Material standard values, column 4 (TECAPEEK MT), row Tensile strength at yield","page":94},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-5ae9fea967b493653afa","material_id":"tecapeek-mt","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.15},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":15.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 94, Material standard values, column 4 (TECAPEEK MT), row Elongation at break","page":94},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-25f3aa952c5677f73216","material_id":"tecapeek-mt","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.27},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.27}},"source_id":"ensinger-manual","source_locator":{"label":"Page 94, Material standard values, column 4 (TECAPEEK MT), row Thermal conductivity","page":94},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-e849489d7fc55a17cb66","material_id":"tecapeek-mt","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":175000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":175.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 94, Material standard values, column 4 (TECAPEEK MT), row Flexural strength","page":94},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-7c1184a55dbed88844c2","material_id":"tecapeek-cf30-mt","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1420.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.42}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 1 (TECAPEEK CF30 MT), row Density","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-d9ba4b6925249526aff4","material_id":"tecapeek-cf30-mt","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":6000000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":6000.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 1 (TECAPEEK CF30 MT), row Modulus of elasticity (tensile test)","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-0be3580fc50edac6dea5","material_id":"tecapeek-cf30-mt","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":115000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":115.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 1 (TECAPEEK CF30 MT), row Tensile strength","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-cef53e925f055d134dbd","material_id":"tecapeek-cf30-mt","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":115000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":115.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 1 (TECAPEEK CF30 MT), row Tensile strength at yield","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-39b1341600ce7bfb095b","material_id":"tecapeek-cf30-mt","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.05},"kind":"point","reported":{"significant_figures":1,"unit":"%","value":5.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 1 (TECAPEEK CF30 MT), row Elongation at break","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-23a0a791258ef52895c6","material_id":"tecapeek-cf30-mt","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.59},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.59}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 1 (TECAPEEK CF30 MT), row Thermal conductivity","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-d80bf901c73c300aac37","material_id":"tecapeek-cf30-mt","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":188000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":188.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 1 (TECAPEEK CF30 MT), row Flexural strength","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-e3dda7e4d0c5f6fa04a3","material_id":"tecapeek-classix-white","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1400.0},"kind":"point","reported":{"significant_figures":2,"unit":"g/cm³","value":1.4}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 2 (TECAPEEK CLASSIX white), row Density","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-5ef7a536e30caf30b511","material_id":"tecapeek-classix-white","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":4700000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":4700.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 2 (TECAPEEK CLASSIX white), row Modulus of elasticity (tensile test)","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-a070a5bebb3701dc74ba","material_id":"tecapeek-classix-white","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":117000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":117.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 2 (TECAPEEK CLASSIX white), row Tensile strength","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-eece5528e4b115902465","material_id":"tecapeek-classix-white","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":117000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":117.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 2 (TECAPEEK CLASSIX white), row Tensile strength at yield","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-022d58a6760c72c57c4e","material_id":"tecapeek-classix-white","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.11},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":11.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 2 (TECAPEEK CLASSIX white), row Elongation at break","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-d0b96994815f7e9db9e8","material_id":"tecapeek-classix-white","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.3},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.3}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 2 (TECAPEEK CLASSIX white), row Thermal conductivity","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-8379b26872622073b7a7","material_id":"tecapeek-classix-white","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":177000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":177.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 2 (TECAPEEK CLASSIX white), row Flexural strength","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-70845c5a39bfeafb4ce3","material_id":"tecapeek-ts","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1490.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.49}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 3 (TECAPEEK TS), row Density","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-6d959ea06ae11b9f3b42","material_id":"tecapeek-ts","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":5700000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":5700.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 3 (TECAPEEK TS), row Modulus of elasticity (tensile test)","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-001ad1e458f77eb3942a","material_id":"tecapeek-ts","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":110000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":110.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 3 (TECAPEEK TS), row Tensile strength","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-2ceb598eceaa045b300e","material_id":"tecapeek-ts","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":110000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":110.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 3 (TECAPEEK TS), row Tensile strength at yield","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-7a04138bfea70f979852","material_id":"tecapeek-ts","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.04},"kind":"point","reported":{"significant_figures":1,"unit":"%","value":4.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 3 (TECAPEEK TS), row Elongation at break","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-1a99d7fbdeb39b015c48","material_id":"tecapeek-ts","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":175000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":175.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 3 (TECAPEEK TS), row Flexural strength","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-21578429947db78e4cee","material_id":"tecapeek-cmf","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1650.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.65}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 4 (TECAPEEK CMF), row Density","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-af5dceaf983e41aec192","material_id":"tecapeek-cmf","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":5500000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":5500.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 4 (TECAPEEK CMF), row Modulus of elasticity (tensile test)","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-20e38ee00348173896f9","material_id":"tecapeek-cmf","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":105000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":105.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 4 (TECAPEEK CMF), row Tensile strength","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-be70f240fa0954105890","material_id":"tecapeek-cmf","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":102000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":102.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 4 (TECAPEEK CMF), row Tensile strength at yield","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-a283a10543357e61981f","material_id":"tecapeek-cmf","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.04},"kind":"point","reported":{"significant_figures":1,"unit":"%","value":4.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 4 (TECAPEEK CMF), row Elongation at break","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-df8a0abccca899fe6fdb","material_id":"tecapeek-cmf","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.38},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.38}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 4 (TECAPEEK CMF), row Thermal conductivity","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 22007-4:2008"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-042bdfe2c32e9716b991","material_id":"tecapeek-cmf","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":170000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":170.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 4 (TECAPEEK CMF), row Flexural strength","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-8183598d1c4e2a18e2de","material_id":"tecapeek-ht-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1310.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.31}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 6 (TECAPEEK HT black), row Density","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-e29e62f7d5bd3d78c728","material_id":"tecapeek-ht-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":4600000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":4600.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 6 (TECAPEEK HT black), row Modulus of elasticity (tensile test)","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-8bfd2d8a5c13dd877379","material_id":"tecapeek-ht-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":120000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":120.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 6 (TECAPEEK HT black), row Tensile strength","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-b05afa5e0f3fa5d11d39","material_id":"tecapeek-ht-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":120000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":120.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 6 (TECAPEEK HT black), row Tensile strength at yield","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-5d0234c6a48a95d80276","material_id":"tecapeek-ht-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.05},"kind":"point","reported":{"significant_figures":1,"unit":"%","value":5.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 6 (TECAPEEK HT black), row Elongation at break","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-98c38327cbc2ce5e2d60","material_id":"tecapeek-ht-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":192000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":192.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 6 (TECAPEEK HT black), row Flexural strength","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-b299d4b083bd70be282e","material_id":"tecapeek-st-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1320.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.32}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 7 (TECAPEEK ST black), row Density","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-98bfc7f9589f6eeaa0b5","material_id":"tecapeek-st-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":4600000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":4600.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 7 (TECAPEEK ST black), row Modulus of elasticity (tensile test)","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-98fd9a33e3e96c3a05f0","material_id":"tecapeek-st-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":134000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":134.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 7 (TECAPEEK ST black), row Tensile strength","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-35adbfb9663ffa035154","material_id":"tecapeek-st-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":134000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":134.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 7 (TECAPEEK ST black), row Tensile strength at yield","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-4abee46f5dea7b08d107","material_id":"tecapeek-st-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.13},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":13.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 7 (TECAPEEK ST black), row Elongation at break","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-d79155187205dc30eadc","material_id":"tecapeek-st-black","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":193000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":193.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 7 (TECAPEEK ST black), row Flexural strength","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-405d4ac15f252992a41f","material_id":"tecatec-peek-cw50","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1490.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.49}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 8 (TECATEC PEEK CW50), row Density","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-6eca42f4c014a03e2a13","material_id":"tecatec-peek-cw50","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":53200000000.0},"kind":"point","reported":{"significant_figures":5,"unit":"MPa","value":53200.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 8 (TECATEC PEEK CW50), row Modulus of elasticity (tensile test)","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-ded5f99b88229ea99131","material_id":"tecatec-peek-cw50","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":491000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":491.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 8 (TECATEC PEEK CW50), row Tensile strength","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-6afa4f1665a50e1e8a6c","material_id":"tecatec-peek-cw50","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":813000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":813.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 8 (TECATEC PEEK CW50), row Flexural strength","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-3985d3e68f0529cec1e3","material_id":"tecatec-pekk-cw60","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1610.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.61}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 9 (TECATEC PEKK CW60), row Density","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-a6dab510d759b49a7a3f","material_id":"tecatec-pekk-cw60","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":54300000000.0},"kind":"point","reported":{"significant_figures":5,"unit":"MPa","value":54300.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 9 (TECATEC PEKK CW60), row Modulus of elasticity (tensile test)","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-c420f814e4f53d17cc45","material_id":"tecatec-pekk-cw60","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":585000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":585.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 9 (TECATEC PEKK CW60), row Tensile strength","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-2698ecc88c0c8e5aebd1","material_id":"tecatec-pekk-cw60","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":960000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":960.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 9 (TECATEC PEKK CW60), row Flexural strength","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-696bca6f64761b2db7a6","material_id":"tecator-5013","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1400.0},"kind":"point","reported":{"significant_figures":2,"unit":"g/cm³","value":1.4}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 10 (TECATOR 5013), row Density","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-8a1427fc5ac1f9d3d533","material_id":"tecator-5013","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":3800000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":3800.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 10 (TECATOR 5013), row Modulus of elasticity (tensile test)","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-8e130343fe274764c573","material_id":"tecator-5013","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":151000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":151.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 10 (TECATOR 5013), row Tensile strength","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-15e10835951a373f2f2e","material_id":"tecator-5013","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":151000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":151.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 10 (TECATOR 5013), row Tensile strength at yield","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-80b13ab0df2e26160010","material_id":"tecator-5013","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.21},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":21.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 10 (TECATOR 5013), row Elongation at break","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-eba9855cb234526cc4e9","material_id":"tecator-5013","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.29},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.29}},"source_id":"ensinger-manual","source_locator":{"label":"Page 95, Material standard values, column 10 (TECATOR 5013), row Thermal conductivity","page":95},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM E1530"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-07420e69ba81b08d46b9","material_id":"tecator-5031-pvx","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1460.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.46}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 1 (TECATOR 5031 PVX), row Density","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-84fb1d9bed8a703043db","material_id":"tecator-5031-pvx","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":5900000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":5900.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 1 (TECATOR 5031 PVX), row Modulus of elasticity (tensile test)","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-c63e37a365e0fdb94c0c","material_id":"tecator-5031-pvx","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":135000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":135.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 1 (TECATOR 5031 PVX), row Tensile strength","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-2f5e25f4fd7f7fbe5a24","material_id":"tecator-5031-pvx","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":135000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":135.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 1 (TECATOR 5031 PVX), row Tensile strength at yield","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-67007a408b79d9f01128","material_id":"tecator-5031-pvx","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.07},"kind":"point","reported":{"significant_figures":1,"unit":"%","value":7.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 1 (TECATOR 5031 PVX), row Elongation at break","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-f86866bdca8eebab2db9","material_id":"tecator-5031-pvx","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.6},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.6}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 1 (TECATOR 5031 PVX), row Thermal conductivity","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM E1530"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-46f8a7108a56e7b41a3a","material_id":"tecasint-1011","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1340.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.34}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 2 (TECASINT 1011), row Density","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-b94b53e904e54f1a3559","material_id":"tecasint-1011","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":4000000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":4000.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 2 (TECASINT 1011), row Modulus of elasticity (tensile test)","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-ea8368d25a91f13748e9","material_id":"tecasint-1011","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":116000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":116.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 2 (TECASINT 1011), row Tensile strength","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-88ca2b0bf760cf188ac4","material_id":"tecasint-1011","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.09},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":9.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 2 (TECASINT 1011), row Elongation at break","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-a17b7d32e22111549b6a","material_id":"tecasint-1011","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.22},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.22}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 2 (TECASINT 1011), row Thermal conductivity","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 8302"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-e3b1a5fb0bed6d0b623e","material_id":"tecasint-1011","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":210000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":210.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 2 (TECASINT 1011), row Flexural strength","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-fc5d65edbd6f1906b9c1","material_id":"tecasint-1021","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1420.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.42}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 3 (TECASINT 1021), row Density","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-e761858aa5d4dd5cde65","material_id":"tecasint-1021","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":4000000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":4000.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 3 (TECASINT 1021), row Modulus of elasticity (tensile test)","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-78a0a042adcac664c44f","material_id":"tecasint-1021","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":97000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":97.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 3 (TECASINT 1021), row Tensile strength","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-a3b67ac995cdea291744","material_id":"tecasint-1021","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.027999999999999997},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":2.8}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 3 (TECASINT 1021), row Elongation at break","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-c296f09eed9de90ec5d3","material_id":"tecasint-1021","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.53},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.53}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 3 (TECASINT 1021), row Thermal conductivity","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 8302"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-f481ce7ddd775ff28556","material_id":"tecasint-1021","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":150000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":150.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 3 (TECASINT 1021), row Flexural strength","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-69a63e6173e06d4de544","material_id":"tecasint-1031","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1570.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.57}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 4 (TECASINT 1031), row Density","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-c80cd5a792ed0d0bcc0f","material_id":"tecasint-1031","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":65000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":65.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 4 (TECASINT 1031), row Tensile strength","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-17a33d66b306562609d3","material_id":"tecasint-1031","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.022000000000000002},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":2.2}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 4 (TECASINT 1031), row Elongation at break","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-722ea7f32015cd33dc56","material_id":"tecasint-1031","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":88000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":88.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 4 (TECASINT 1031), row Flexural strength","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-e3d68bd73b9c7b589108","material_id":"tecasint-1041","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1670.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.67}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 5 (TECASINT 1041), row Density","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-56b08a24908f673f80f0","material_id":"tecasint-1041","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":4340000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":4340.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 5 (TECASINT 1041), row Modulus of elasticity (tensile test)","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-fd96c3816665d0391cbf","material_id":"tecasint-1041","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":82000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":82.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 5 (TECASINT 1041), row Tensile strength","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-bc69a15139d778870c2e","material_id":"tecasint-1041","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.027999999999999997},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":2.8}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 5 (TECASINT 1041), row Elongation at break","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-a45091945b441567ac0e","material_id":"tecasint-1041","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":126000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":126.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 5 (TECASINT 1041), row Flexural strength","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-eae6d223822c8fead058","material_id":"tecasint-1061","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1480.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.48}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 6 (TECASINT 1061), row Density","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-7b0c54ec569885c73a13","material_id":"tecasint-1061","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":77000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":77.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 6 (TECASINT 1061), row Tensile strength","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-90109a936492b6822574","material_id":"tecasint-1061","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.028999999999999998},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":2.9}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 6 (TECASINT 1061), row Elongation at break","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-c716f25a3332cd750543","material_id":"tecasint-1061","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":120000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":120.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 6 (TECASINT 1061), row Flexural strength","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-0c15ab9ba616a0f9da39","material_id":"tecasint-1101","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1340.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.34}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 7 (TECASINT 1101), row Density","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-ca73a006aca947024514","material_id":"tecasint-1101","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":4000000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":4000.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 7 (TECASINT 1101), row Modulus of elasticity (tensile test)","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-08f13cac03bedd540150","material_id":"tecasint-1101","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":153000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":153.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 7 (TECASINT 1101), row Tensile strength","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-ee243f89a4b9527c6a6f","material_id":"tecasint-1101","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.07400000000000001},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":7.4}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 7 (TECASINT 1101), row Elongation at break","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-d2f88aed76003640a120","material_id":"tecasint-1101","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.22},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.22}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 7 (TECASINT 1101), row Thermal conductivity","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 8302"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-49a35ea62a5968bc1dc4","material_id":"tecasint-1101","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":209000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":209.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 7 (TECASINT 1101), row Flexural strength","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-c180ae68e5f49b21e137","material_id":"tecasint-1611","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1510.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.51}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 8 (TECASINT 1611), row Density","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-9dcba6ad4e9e46359a98","material_id":"tecasint-1611","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":82000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":82.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 8 (TECASINT 1611), row Tensile strength","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-68cce0ef9ad4bb2024b7","material_id":"tecasint-1611","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.040999999999999995},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":4.1}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 8 (TECASINT 1611), row Elongation at break","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-1209002607443dee0307","material_id":"tecasint-1611","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":122000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":122.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 8 (TECASINT 1611), row Flexural strength","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-cbf2a7bb7324568e2661","material_id":"tecasint-2011","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1380.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.38}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 9 (TECASINT 2011), row Density","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-c50659a03eeceab975bf","material_id":"tecasint-2011","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":3700000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":3700.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 9 (TECASINT 2011), row Modulus of elasticity (tensile test)","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-cc128e75ccd5bbf0c51a","material_id":"tecasint-2011","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":118000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":118.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 9 (TECASINT 2011), row Tensile strength","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-4b0eae986fe60cdc6ff6","material_id":"tecasint-2011","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.045},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":4.5}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 9 (TECASINT 2011), row Elongation at break","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-4ba536035a30f38db1a5","material_id":"tecasint-2011","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.22},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.22}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 9 (TECASINT 2011), row Thermal conductivity","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 8302"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-0d208cd5935d4c0736b4","material_id":"tecasint-2011","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":177000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":177.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 9 (TECASINT 2011), row Flexural strength","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-f9b80ca2b7351b94ab4c","material_id":"tecasint-2021","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1450.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.45}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 10 (TECASINT 2021), row Density","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-d81ec3322ef47df05d33","material_id":"tecasint-2021","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":4400000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":4400.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 10 (TECASINT 2021), row Modulus of elasticity (tensile test)","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-c152e3d067ebef0ec9e4","material_id":"tecasint-2021","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":101000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":101.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 10 (TECASINT 2021), row Tensile strength","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-da7f67f3fa34baeae3c9","material_id":"tecasint-2021","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.037000000000000005},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":3.7}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 10 (TECASINT 2021), row Elongation at break","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-00691403eabb29cfb3a6","material_id":"tecasint-2021","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":145000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":145.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 96, Material standard values, column 10 (TECASINT 2021), row Flexural strength","page":96},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-cd26fd4b873e9b8f9d0c","material_id":"tecasint-2031","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1590.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.59}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 1 (TECASINT 2031), row Density","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-5c6c57875a101c34d074","material_id":"tecasint-2031","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":6300000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":6300.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 1 (TECASINT 2031), row Modulus of elasticity (tensile test)","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-f30891c2d476ca446175","material_id":"tecasint-2031","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":65000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":65.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 1 (TECASINT 2031), row Tensile strength","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-7880b2bd373d656e83ff","material_id":"tecasint-2031","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.021},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":2.1}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 1 (TECASINT 2031), row Elongation at break","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-cbd178f9e4ce6ed279f0","material_id":"tecasint-2031","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":87500000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":87.5}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 1 (TECASINT 2031), row Flexural strength","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-6b135a3774ee4703d102","material_id":"tecasint-2391","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1540.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.54}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 2 (TECASINT 2391), row Density","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-b98657876e622ff3db5e","material_id":"tecasint-2391","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":4400000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":4400.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 2 (TECASINT 2391), row Modulus of elasticity (tensile test)","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-cdba10d1595e12775abf","material_id":"tecasint-2391","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":95000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":95.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 2 (TECASINT 2391), row Tensile strength","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-fdb31a8cb654f1509701","material_id":"tecasint-2391","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.028999999999999998},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":2.9}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 2 (TECASINT 2391), row Elongation at break","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-6320db814e1845e70abc","material_id":"tecasint-2391","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":137000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":137.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 2 (TECASINT 2391), row Flexural strength","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-064d68764c2fb5b46d3c","material_id":"tecasint-4011","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1410.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.41}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 3 (TECASINT 4011), row Density","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-1bc69271dd80f6e69a44","material_id":"tecasint-4011","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":4000000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":4000.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 3 (TECASINT 4011), row Modulus of elasticity (tensile test)","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-731e555a4477ed42a074","material_id":"tecasint-4011","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":130000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":130.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 3 (TECASINT 4011), row Tensile strength","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-4ebc979d461fa2f7f365","material_id":"tecasint-4011","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.045},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":4.5}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 3 (TECASINT 4011), row Elongation at break","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-e05029e6d0a932933a4a","material_id":"tecasint-4011","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.4},"kind":"point","reported":{"significant_figures":1,"unit":"W/(m·K)","value":0.4}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 3 (TECASINT 4011), row Thermal conductivity","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 8302"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-88052902872016a8d2b6","material_id":"tecasint-4011","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":180000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":180.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 3 (TECASINT 4011), row Flexural strength","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-71b77a95f8b8e2492e0c","material_id":"tecasint-4021","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1490.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.49}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 4 (TECASINT 4021), row Density","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-2a25c698c22b487633b5","material_id":"tecasint-4021","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":4943000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":4943.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 4 (TECASINT 4021), row Modulus of elasticity (tensile test)","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-bec2803aa8478c75c47f","material_id":"tecasint-4021","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":93000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":93.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 4 (TECASINT 4021), row Tensile strength","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-10f15372221bd2473a49","material_id":"tecasint-4021","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.03},"kind":"point","reported":{"significant_figures":1,"unit":"%","value":3.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 4 (TECASINT 4021), row Elongation at break","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-c268489777457a0e7720","material_id":"tecasint-4021","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":131000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":131.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 4 (TECASINT 4021), row Flexural strength","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-1858991659f0522c760d","material_id":"tecasint-4111","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1460.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.46}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 5 (TECASINT 4111), row Density","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-71c928dd6a8ca8be8496","material_id":"tecasint-4111","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":7000000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":7000.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 5 (TECASINT 4111), row Modulus of elasticity (tensile test)","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-8bf474a658b2efd26613","material_id":"tecasint-4111","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":100000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":100.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 5 (TECASINT 4111), row Tensile strength","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-fa063b39cdb8907b14c4","material_id":"tecasint-4111","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.017},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":1.7}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 5 (TECASINT 4111), row Elongation at break","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-22ccddb79499e71904ab","material_id":"tecasint-4111","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.35},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.35}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 5 (TECASINT 4111), row Thermal conductivity","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 8302"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-d9d7ecaf056fcd621b55","material_id":"tecasint-4111","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":160000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":160.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 5 (TECASINT 4111), row Flexural strength","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-7b97ef7900f39bce04b3","material_id":"tecasint-4121","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1530.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.53}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 6 (TECASINT 4121), row Density","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-8b82c398e7bf998ca35b","material_id":"tecasint-4121","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":6600000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":6600.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 6 (TECASINT 4121), row Modulus of elasticity (tensile test)","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-131346274e40f99998a4","material_id":"tecasint-4121","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":34000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":34.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 6 (TECASINT 4121), row Tensile strength","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-1a34658e5167846233ca","material_id":"tecasint-4121","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.005},"kind":"point","reported":{"significant_figures":1,"unit":"%","value":0.5}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 6 (TECASINT 4121), row Elongation at break","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-c628de317efe263c38e0","material_id":"tecasint-4121","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":113000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":113.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 6 (TECASINT 4121), row Flexural strength","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-94ffc65c5bb4a6f9f992","material_id":"tecasint-5051","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1570.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.57}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 7 (TECASINT 5051), row Density","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-88eb3c517a68c8dd940c","material_id":"tecasint-5051","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":5800000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":5800.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 7 (TECASINT 5051), row Modulus of elasticity (tensile test)","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-1e2039a11e5c341a0b1e","material_id":"tecasint-5051","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":94000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":94.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 7 (TECASINT 5051), row Tensile strength","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-e6da7cd7aac169fef04d","material_id":"tecasint-5051","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.034},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":3.4}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 7 (TECASINT 5051), row Elongation at break","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-ebf345b82b0a99bd1260","material_id":"tecasint-5051","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":163000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":163.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 7 (TECASINT 5051), row Flexural strength","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-09c23f29c6ef66caa0d9","material_id":"tecasint-5201-sd","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1540.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.54}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 8 (TECASINT 5201 SD), row Density","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-572487cb5ed86bb3bd8e","material_id":"tecasint-5201-sd","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":4500000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":4500.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 8 (TECASINT 5201 SD), row Modulus of elasticity (tensile test)","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-7bb44bb89589ec073b1a","material_id":"tecasint-5201-sd","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":85000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":85.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 8 (TECASINT 5201 SD), row Tensile strength","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-9e3ae309e7a622740c98","material_id":"tecasint-5201-sd","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.04},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":4.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 8 (TECASINT 5201 SD), row Elongation at break","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-b0e43b0e0e14e36fd598","material_id":"tecasint-5201-sd","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":135000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":135.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 8 (TECASINT 5201 SD), row Flexural strength","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 178"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-1752707aefbddbb2cffa","material_id":"tecasint-8001","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":1880.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":1.88}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 9 (TECASINT 8001), row Density","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 1183"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-18db6c4ce484653aadaa","material_id":"tecasint-8001","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":15000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":15.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 9 (TECASINT 8001), row Tensile strength","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-2819f465335414dbcd63","material_id":"tecasint-8001","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":2.0},"kind":"point","reported":{"significant_figures":3,"unit":"%","value":200.0}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 9 (TECASINT 8001), row Elongation at break","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"DIN EN ISO 527-2"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"stock_shape"},"id":"obs-8c08e197e987359e6604","material_id":"tecasint-8001","notes":"Machined specimen; tested after machining. Humidity affects polyamides; orientation and exact test temperature are not specified in this table.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":0.25},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":0.25}},"source_id":"ensinger-manual","source_locator":{"label":"Page 97, Material standard values, column 9 (TECASINT 8001), row Thermal conductivity","page":97},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 8302"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-108b4ff2bc640b4b2cad","material_id":"coorstek-porcelain","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":2400.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":2.4}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 1 (Porcelain), row Density","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C20"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-c651992521b8009a9e20","material_id":"coorstek-porcelain","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":104000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":104.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 1 (Porcelain), row Elastic Modulus, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-63aba61605a9bce010fb","material_id":"coorstek-porcelain","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":5.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":5.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 1 (Porcelain), row Thermal Conductivity, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C408"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-f1a9d3504e6c5682edc1","material_id":"coorstek-porcelain","notes":"","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":130000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":130.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 1 (Porcelain), row Flexural Strength (MOR), 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM F417; four-point bend"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-fc4f917a34ee1fe3ba5c","material_id":"coorstek-steatite","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":2780.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":2.78}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 2 (Steatite), row Density","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C20"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-c28e246d5dbab6a147e5","material_id":"coorstek-steatite","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":110000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":110.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 2 (Steatite), row Elastic Modulus, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-0ee9b0fe4c81c6a88758","material_id":"coorstek-steatite","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":2.5},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":2.5}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 2 (Steatite), row Thermal Conductivity, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C408"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-f15dce713717b82a3ea4","material_id":"coorstek-steatite","notes":"","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":140000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":140.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 2 (Steatite), row Flexural Strength (MOR), 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM F417; four-point bend"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-22e035895b974dbe2995","material_id":"coorstek-cordierite","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":2050.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":2.05}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 3 (Cordierite), row Density","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C20"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-5d59828ae417e845d1a7","material_id":"coorstek-cordierite","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":40000000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"GPa","value":40.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 3 (Cordierite), row Elastic Modulus, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-f0e59589390a2816a1a7","material_id":"coorstek-cordierite","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":1.6},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":1.6}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 3 (Cordierite), row Thermal Conductivity, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C408"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-18db719b35f463cd9c31","material_id":"coorstek-cordierite","notes":"","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":55000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":55.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 3 (Cordierite), row Flexural Strength (MOR), 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM F417; four-point bend"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-45027b1e8dd692742156","material_id":"coorstek-mullite","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":2800.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":2.8}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 4 (Mullite), row Density","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C20"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-bc95e3679149c6d22983","material_id":"coorstek-mullite","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":150000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":150.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 4 (Mullite), row Elastic Modulus, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-ace46acfafebdd7c4fc8","material_id":"coorstek-mullite","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":3.5},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":3.5}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 4 (Mullite), row Thermal Conductivity, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C408"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-78ee5e5dd199df47e9e1","material_id":"coorstek-mullite","notes":"","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":170000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":170.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 4 (Mullite), row Flexural Strength (MOR), 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM F417; four-point bend"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":373.15},"id":"obs-0e8a3f5ba12051a4bc01","material_id":"coorstek-mullite","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":950.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":950.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 4 (Mullite), row Specific Heat, 100 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM E1269"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-6bcca6cd85f719ff3008","material_id":"coorstek-ad-85","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":3420.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":3.42}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 5 (AD-85), row Density","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C20"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-91e22b28f444e7194ea8","material_id":"coorstek-ad-85","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":221000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":221.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 5 (AD-85), row Elastic Modulus, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-af350728e6f8242297fa","material_id":"coorstek-ad-85","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":16.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":16.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 5 (AD-85), row Thermal Conductivity, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C408"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-00a6440e67122d441f58","material_id":"coorstek-ad-85","notes":"","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":296000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":296.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 5 (AD-85), row Flexural Strength (MOR), 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM F417; four-point bend"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-fbb1a4ca40e238f3a2ac","material_id":"coorstek-ad-85","notes":"","property_id":"poissons_ratio","result":{"canonical":{"unit":"1","value":0.22},"kind":"point","reported":{"significant_figures":2,"unit":"1","value":0.22}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 5 (AD-85), row Poisson’s Ratio, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":373.15},"id":"obs-a4d33001487132f2998b","material_id":"coorstek-ad-85","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":920.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":920.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 5 (AD-85), row Specific Heat, 100 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM E1269"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-3d3e99bf22815b862c7b","material_id":"coorstek-ad-90","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":3600.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":3.6}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 6 (AD-90), row Density","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C20"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-e6fc793b3c0e6f3fd6c6","material_id":"coorstek-ad-90","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":276000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":276.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 6 (AD-90), row Elastic Modulus, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-149ee74327c5ecfeb14e","material_id":"coorstek-ad-90","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":16.7},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":16.7}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 6 (AD-90), row Thermal Conductivity, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C408"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-b5bfc2fadc6e10358606","material_id":"coorstek-ad-90","notes":"","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":338000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":338.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 6 (AD-90), row Flexural Strength (MOR), 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM F417; four-point bend"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-a71978bfe4be67f0dad4","material_id":"coorstek-ad-90","notes":"","property_id":"poissons_ratio","result":{"canonical":{"unit":"1","value":0.22},"kind":"point","reported":{"significant_figures":2,"unit":"1","value":0.22}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 6 (AD-90), row Poisson’s Ratio, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":373.15},"id":"obs-7dfeb7d877d1564073cc","material_id":"coorstek-ad-90","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":920.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":920.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 6 (AD-90), row Specific Heat, 100 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM E1269"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-a3eeb42045361d7f80b1","material_id":"coorstek-ad-94","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":3700.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":3.7}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 7 (AD-94), row Density","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C20"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-6f132c00725441e6f2de","material_id":"coorstek-ad-94","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":303000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":303.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 7 (AD-94), row Elastic Modulus, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-5865c1b8a2cd6673c438","material_id":"coorstek-ad-94","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":22.4},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":22.4}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 7 (AD-94), row Thermal Conductivity, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C408"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-a83c3dbe5e2d04ead7f4","material_id":"coorstek-ad-94","notes":"","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":352000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":352.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 7 (AD-94), row Flexural Strength (MOR), 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM F417; four-point bend"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-672122ace9bd74a256da","material_id":"coorstek-ad-94","notes":"","property_id":"poissons_ratio","result":{"canonical":{"unit":"1","value":0.21},"kind":"point","reported":{"significant_figures":2,"unit":"1","value":0.21}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 7 (AD-94), row Poisson’s Ratio, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":373.15},"id":"obs-d8cbac7c97e02129a011","material_id":"coorstek-ad-94","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":880.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":880.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 7 (AD-94), row Specific Heat, 100 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM E1269"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-808acf1310f5d5e983ce","material_id":"coorstek-ad-96","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":3720.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":3.72}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 8 (AD-96), row Density","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C20"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-2d3dae3ba2d4b0e1b040","material_id":"coorstek-ad-96","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":303000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":303.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 8 (AD-96), row Elastic Modulus, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-72367cae78100442f470","material_id":"coorstek-ad-96","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":24.7},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":24.7}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 8 (AD-96), row Thermal Conductivity, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C408"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-1d4c88f5fd9c48ea61ed","material_id":"coorstek-ad-96","notes":"","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":358000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":358.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 8 (AD-96), row Flexural Strength (MOR), 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM F417; four-point bend"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-6eec5dfb9fe3f856dffe","material_id":"coorstek-ad-96","notes":"","property_id":"poissons_ratio","result":{"canonical":{"unit":"1","value":0.21},"kind":"point","reported":{"significant_figures":2,"unit":"1","value":0.21}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 8 (AD-96), row Poisson’s Ratio, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":373.15},"id":"obs-7a4272806d4f0b9bca61","material_id":"coorstek-ad-96","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":880.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":880.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 8 (AD-96), row Specific Heat, 100 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM E1269"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-85d368b2ca800f0338ca","material_id":"coorstek-fg-995","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":3800.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":3.8}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 9 (FG-995), row Density","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C20"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-73bf2c02e234728baf0f","material_id":"coorstek-fg-995","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":350000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":350.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 9 (FG-995), row Elastic Modulus, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-f725da9f5459aef696dd","material_id":"coorstek-fg-995","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":27.5},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":27.5}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 9 (FG-995), row Thermal Conductivity, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C408"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-d46d6dfd3c7abeaec7e7","material_id":"coorstek-fg-995","notes":"","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":375000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":375.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 9 (FG-995), row Flexural Strength (MOR), 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM F417; four-point bend"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-77738113fceb5ca5e4de","material_id":"coorstek-fg-995","notes":"","property_id":"poissons_ratio","result":{"canonical":{"unit":"1","value":0.22},"kind":"point","reported":{"significant_figures":2,"unit":"1","value":0.22}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 9 (FG-995), row Poisson’s Ratio, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":373.15},"id":"obs-54a2b9e023dee5ac62ba","material_id":"coorstek-fg-995","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":880.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":880.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 9 (FG-995), row Specific Heat, 100 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM E1269"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-97f5687b38021842f1b6","material_id":"coorstek-ad-995","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":3900.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":3.9}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 10 (AD-995), row Density","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C20"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-af38916fd248c9002f0e","material_id":"coorstek-ad-995","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":370000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":370.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 10 (AD-995), row Elastic Modulus, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-d1b1a0c59b9b8a9f8ef9","material_id":"coorstek-ad-995","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":30.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":30.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 10 (AD-995), row Thermal Conductivity, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C408"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-01d41f81acdc8c5f9a00","material_id":"coorstek-ad-995","notes":"","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":379000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":379.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 10 (AD-995), row Flexural Strength (MOR), 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM F417; four-point bend"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-d3804c994bdbe6377800","material_id":"coorstek-ad-995","notes":"","property_id":"poissons_ratio","result":{"canonical":{"unit":"1","value":0.22},"kind":"point","reported":{"significant_figures":2,"unit":"1","value":0.22}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 10 (AD-995), row Poisson’s Ratio, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":373.15},"id":"obs-9f249ee374ef850bdb80","material_id":"coorstek-ad-995","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":880.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":880.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 10 (AD-995), row Specific Heat, 100 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM E1269"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-0573846c0f5c58d08e49","material_id":"coorstek-plasmapure-ad-998","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":3920.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":3.92}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 11 (PlasmaPure AD-998), row Density","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C20"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-84c11f46feb498a87998","material_id":"coorstek-plasmapure-ad-998","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":380000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":380.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 11 (PlasmaPure AD-998), row Elastic Modulus, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-b7977666e01236df5468","material_id":"coorstek-plasmapure-ad-998","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":31.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":31.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 11 (PlasmaPure AD-998), row Thermal Conductivity, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C408"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-160701f4b59b9b9fa2d4","material_id":"coorstek-plasmapure-ad-998","notes":"","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":390000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":390.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 11 (PlasmaPure AD-998), row Flexural Strength (MOR), 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM F417; four-point bend"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-478487a51baa32e5fc2c","material_id":"coorstek-plasmapure-ad-998","notes":"","property_id":"poissons_ratio","result":{"canonical":{"unit":"1","value":0.22},"kind":"point","reported":{"significant_figures":2,"unit":"1","value":0.22}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 11 (PlasmaPure AD-998), row Poisson’s Ratio, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":373.15},"id":"obs-a85dfe1dabbb8775e21d","material_id":"coorstek-plasmapure-ad-998","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":880.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":880.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 11 (PlasmaPure AD-998), row Specific Heat, 100 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM E1269"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-820fd5c5d135de94b7dc","material_id":"coorstek-plasmapure-uc","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":3920.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":3.92}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 12 (PlasmaPure-UC), row Density","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C20"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-b04465d7a0161932b355","material_id":"coorstek-plasmapure-uc","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":386000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":386.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 12 (PlasmaPure-UC), row Elastic Modulus, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-e24988389378a144f3fc","material_id":"coorstek-plasmapure-uc","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":33.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":33.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 12 (PlasmaPure-UC), row Thermal Conductivity, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C408"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-d775f65cf70448ca409e","material_id":"coorstek-plasmapure-uc","notes":"","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":400000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":400.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 12 (PlasmaPure-UC), row Flexural Strength (MOR), 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM F417; four-point bend"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-7daa204d4a7ea6868799","material_id":"coorstek-plasmapure-uc","notes":"","property_id":"poissons_ratio","result":{"canonical":{"unit":"1","value":0.22},"kind":"point","reported":{"significant_figures":2,"unit":"1","value":0.22}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 12 (PlasmaPure-UC), row Poisson’s Ratio, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":373.15},"id":"obs-9df2bb54c243a0107750","material_id":"coorstek-plasmapure-uc","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":870.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":870.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 12 (PlasmaPure-UC), row Specific Heat, 100 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM E1269"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-ce657e0bdf3f2d0acfce","material_id":"coorstek-esd-alumina","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":3850.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":3.85}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 13 (ESD Alumina), row Density","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C20"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-b21e6b278f1ee77d5c56","material_id":"coorstek-esd-alumina","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":370000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":370.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 13 (ESD Alumina), row Elastic Modulus, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-b6fdd7008b3a7f3d9dba","material_id":"coorstek-esd-alumina","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":25.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":25.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 13 (ESD Alumina), row Thermal Conductivity, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C408"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-1b33a45d631989371591","material_id":"coorstek-esd-alumina","notes":"","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":300000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":300.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 13 (ESD Alumina), row Flexural Strength (MOR), 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM F417; four-point bend"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-dbb6eba8ec2a370d1774","material_id":"coorstek-esd-alumina","notes":"","property_id":"poissons_ratio","result":{"canonical":{"unit":"1","value":0.22},"kind":"point","reported":{"significant_figures":2,"unit":"1","value":0.22}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 13 (ESD Alumina), row Poisson’s Ratio, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-116dc2977e542dd3d890","material_id":"coorstek-zta-10","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":4010.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":4.01}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 14 (ZTA 10%), row Density","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C20"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-4104c2d6f13590a79a1b","material_id":"coorstek-zta-10","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":360000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":360.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 14 (ZTA 10%), row Elastic Modulus, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-aff4a1d9665d54124200","material_id":"coorstek-zta-10","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":27.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":27.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 14 (ZTA 10%), row Thermal Conductivity, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C408"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-ab26c8bfffaa91c8da36","material_id":"coorstek-zta-10","notes":"","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":450000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":450.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 14 (ZTA 10%), row Flexural Strength (MOR), 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM F417; four-point bend"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-221467cfec892454266b","material_id":"coorstek-zta-10","notes":"","property_id":"poissons_ratio","result":{"canonical":{"unit":"1","value":0.3},"kind":"point","reported":{"significant_figures":2,"unit":"1","value":0.3}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 14 (ZTA 10%), row Poisson’s Ratio, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":373.15},"id":"obs-7554e57e76a60425cea7","material_id":"coorstek-zta-10","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":885.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":885.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 14 (ZTA 10%), row Specific Heat, 100 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM E1269"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-b038d6aea5d28acb960e","material_id":"coorstek-dura-z-ttz","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":5720.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":5.72}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 15 (Dura-Z TTZ), row Density","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C20"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-e4d0f73ad703d3713f47","material_id":"coorstek-dura-z-ttz","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":200000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":200.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 15 (Dura-Z TTZ), row Elastic Modulus, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-686200624bc09fccb223","material_id":"coorstek-dura-z-ttz","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":2.2},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":2.2}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 15 (Dura-Z TTZ), row Thermal Conductivity, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C408"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-0d08b1e70c7a744d861b","material_id":"coorstek-dura-z-ttz","notes":"","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":900000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":900.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 15 (Dura-Z TTZ), row Flexural Strength (MOR), 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM F417; four-point bend"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-85c5919170e9f5e0c03a","material_id":"coorstek-dura-z-ttz","notes":"","property_id":"poissons_ratio","result":{"canonical":{"unit":"1","value":0.3},"kind":"point","reported":{"significant_figures":2,"unit":"1","value":0.3}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 15 (Dura-Z TTZ), row Poisson’s Ratio, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":373.15},"id":"obs-47bbdc5828a666731e78","material_id":"coorstek-dura-z-ttz","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":400.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":400.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 15 (Dura-Z TTZ), row Specific Heat, 100 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM E1269"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-524acf38ecc0feb70cfa","material_id":"coorstek-ytzp-sintered","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":6020.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":6.02}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 16 (YTZP sintered), row Density","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C20"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-8796ae1fa0aa6979d346","material_id":"coorstek-ytzp-sintered","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":210000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":210.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 16 (YTZP sintered), row Elastic Modulus, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-b699b1883177f64176cf","material_id":"coorstek-ytzp-sintered","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":2.2},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":2.2}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 16 (YTZP sintered), row Thermal Conductivity, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C408"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-6bb37a0711d82e2a812d","material_id":"coorstek-ytzp-sintered","notes":"","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":1240000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":1240.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 16 (YTZP sintered), row Flexural Strength (MOR), 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM F417; four-point bend"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-f554214087c15c9aede0","material_id":"coorstek-ytzp-sintered","notes":"","property_id":"poissons_ratio","result":{"canonical":{"unit":"1","value":0.3},"kind":"point","reported":{"significant_figures":2,"unit":"1","value":0.3}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 16 (YTZP sintered), row Poisson’s Ratio, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":373.15},"id":"obs-5e5455c47ca25e520cce","material_id":"coorstek-ytzp-sintered","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":400.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":400.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 16 (YTZP sintered), row Specific Heat, 100 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM E1269"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-4bb738c481796bab38d2","material_id":"coorstek-ytzp-hiped","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":6070.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":6.07}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 17 (YTZP HIPed), row Density","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C20"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-532daf5285bf7a417288","material_id":"coorstek-ytzp-hiped","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":210000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":210.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 17 (YTZP HIPed), row Elastic Modulus, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-75b661fc71a079fb7e97","material_id":"coorstek-ytzp-hiped","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":2.2},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":2.2}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 17 (YTZP HIPed), row Thermal Conductivity, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C408"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-68380a7a1e1bd030d82f","material_id":"coorstek-ytzp-hiped","notes":"","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":1720000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":1720.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 17 (YTZP HIPed), row Flexural Strength (MOR), 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM F417; four-point bend"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-f7366aa6ab1df07b5d3d","material_id":"coorstek-ytzp-hiped","notes":"","property_id":"poissons_ratio","result":{"canonical":{"unit":"1","value":0.3},"kind":"point","reported":{"significant_figures":2,"unit":"1","value":0.3}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 17 (YTZP HIPed), row Poisson’s Ratio, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":373.15},"id":"obs-31b9dfeb3c96e438b950","material_id":"coorstek-ytzp-hiped","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":400.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":400.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 17 (YTZP HIPed), row Specific Heat, 100 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM E1269"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-95ff9cd37b6205f6e2f9","material_id":"coorstek-sc-rb-sc-2","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":3100.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":3.1}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 18 (SC-RB SC-2), row Density","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C20"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-511130d9e849ac22ed19","material_id":"coorstek-sc-rb-sc-2","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":393000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":393.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 18 (SC-RB SC-2), row Elastic Modulus, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-7e7c9e8331a942aecef9","material_id":"coorstek-sc-rb-sc-2","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":125.0},"kind":"point","reported":{"significant_figures":4,"unit":"W/(m·K)","value":125.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 18 (SC-RB SC-2), row Thermal Conductivity, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C408"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-252811120aeaf8bbc53d","material_id":"coorstek-sc-rb-sc-2","notes":"","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":462000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":462.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 18 (SC-RB SC-2), row Flexural Strength (MOR), 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM F417; four-point bend"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-33e0edfea9dccbc222dc","material_id":"coorstek-sc-rb-sc-2","notes":"","property_id":"poissons_ratio","result":{"canonical":{"unit":"1","value":0.2},"kind":"point","reported":{"significant_figures":2,"unit":"1","value":0.2}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 18 (SC-RB SC-2), row Poisson’s Ratio, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":373.15},"id":"obs-4c360b2c7436d82413f8","material_id":"coorstek-sc-rb-sc-2","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":800.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":800.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 18 (SC-RB SC-2), row Specific Heat, 100 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM E1269"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-55ebce636465a241b77f","material_id":"coorstek-ultrasic-sc-30","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":3150.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":3.15}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 19 (UltraSiC SC-30), row Density","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C20"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-6b053a9fde9dd7b0face","material_id":"coorstek-ultrasic-sc-30","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":410000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":410.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 19 (UltraSiC SC-30), row Elastic Modulus, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-582d854877d6d993d1e3","material_id":"coorstek-ultrasic-sc-30","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":150.0},"kind":"point","reported":{"significant_figures":4,"unit":"W/(m·K)","value":150.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 19 (UltraSiC SC-30), row Thermal Conductivity, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C408"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-b1696b2f9727514ddcba","material_id":"coorstek-ultrasic-sc-30","notes":"","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":480000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":480.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 19 (UltraSiC SC-30), row Flexural Strength (MOR), 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM F417; four-point bend"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-64a139e0d205ba9c1f1f","material_id":"coorstek-ultrasic-sc-30","notes":"","property_id":"poissons_ratio","result":{"canonical":{"unit":"1","value":0.21},"kind":"point","reported":{"significant_figures":2,"unit":"1","value":0.21}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 19 (UltraSiC SC-30), row Poisson’s Ratio, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":373.15},"id":"obs-1d7d32ec47efde7adc23","material_id":"coorstek-ultrasic-sc-30","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":800.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":800.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 19 (UltraSiC SC-30), row Specific Heat, 100 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM E1269"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-8fe182116a6150980fea","material_id":"coorstek-puresic-cvd","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":3210.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":3.21}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 20 (PureSiC CVD), row Density","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C20"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-7b422c347b20807a7a8e","material_id":"coorstek-puresic-cvd","notes":"","property_id":"youngs_modulus","result":{"canonical":{"maximum":460000000000.0,"minimum":435000000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":460.0,"minimum":435.0,"significant_figures":3,"unit":"GPa"}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 20 (PureSiC CVD), row Elastic Modulus, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-d5d6001644477f3094c0","material_id":"coorstek-puresic-cvd","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":140.0},"kind":"point","reported":{"significant_figures":4,"unit":"W/(m·K)","value":140.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 20 (PureSiC CVD), row Thermal Conductivity, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C408"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-f8948e7e4f559cdc053e","material_id":"coorstek-puresic-cvd","notes":"","property_id":"flexural_strength","result":{"canonical":{"maximum":520000000.0,"minimum":470000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":520.0,"minimum":470.0,"significant_figures":3,"unit":"MPa"}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 20 (PureSiC CVD), row Flexural Strength (MOR), 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM F417; four-point bend"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-9f2a43591363e85f163d","material_id":"coorstek-puresic-cvd","notes":"","property_id":"poissons_ratio","result":{"canonical":{"unit":"1","value":0.21},"kind":"point","reported":{"significant_figures":2,"unit":"1","value":0.21}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 20 (PureSiC CVD), row Poisson’s Ratio, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":373.15},"id":"obs-49c3454ec9b5d1e9a2aa","material_id":"coorstek-puresic-cvd","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":665.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":665.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 20 (PureSiC CVD), row Specific Heat, 100 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM E1269"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-4dbb2fc0469282c224cf","material_id":"coorstek-rbb4c","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":2650.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":2.65}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 21 (RBB4C), row Density","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C20"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-b772c34171d8060d0bf0","material_id":"coorstek-rbb4c","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":379000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":379.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 21 (RBB4C), row Elastic Modulus, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-13808f1a29f616dd395e","material_id":"coorstek-rbb4c","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":50.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":50.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 21 (RBB4C), row Thermal Conductivity, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C408"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-619fc088619095da65d6","material_id":"coorstek-rbb4c","notes":"","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":250000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":250.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 21 (RBB4C), row Flexural Strength (MOR), 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM F417; four-point bend"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-a0605cd736caff82bbfe","material_id":"coorstek-rbb4c","notes":"","property_id":"poissons_ratio","result":{"canonical":{"unit":"1","value":0.18},"kind":"point","reported":{"significant_figures":2,"unit":"1","value":0.18}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 21 (RBB4C), row Poisson’s Ratio, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-30a80ab1316288d05245","material_id":"coorstek-hpb4c","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":2500.0},"kind":"point","reported":{"significant_figures":2,"unit":"g/cm³","value":2.5}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 22 (HPB4C), row Density","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C20"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-3ba634e7f82f4d5396eb","material_id":"coorstek-hpb4c","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":460000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":460.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 22 (HPB4C), row Elastic Modulus, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-3ab7d2d980c5bfa5e36a","material_id":"coorstek-hpb4c","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":90.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":90.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 22 (HPB4C), row Thermal Conductivity, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C408"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-3e9b16b0b1b00720572e","material_id":"coorstek-hpb4c","notes":"","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":410000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":410.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 22 (HPB4C), row Flexural Strength (MOR), 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM F417; four-point bend"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-24b411d4181a19be499a","material_id":"coorstek-hpb4c","notes":"","property_id":"poissons_ratio","result":{"canonical":{"unit":"1","value":0.17},"kind":"point","reported":{"significant_figures":2,"unit":"1","value":0.17}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 22 (HPB4C), row Poisson’s Ratio, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-ef316f50417a26960f09","material_id":"coorstek-wc-aci-ni6","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":14900.0},"kind":"point","reported":{"significant_figures":4,"unit":"g/cm³","value":14.9}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 23 (WC ACI-NI6), row Density","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C20"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-b0fb7f618b72453fd912","material_id":"coorstek-wc-aci-ni6","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":614000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":614.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 23 (WC ACI-NI6), row Elastic Modulus, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-2cae3ec5ff664b2696b9","material_id":"coorstek-wc-aci-ni6","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":84.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":84.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 23 (WC ACI-NI6), row Thermal Conductivity, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C408"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-a8fa4963dbf651a8b257","material_id":"coorstek-wc-aci-ni6","notes":"","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":2330000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":2330.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 23 (WC ACI-NI6), row Flexural Strength (MOR), 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM F417; four-point bend"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-dd7da8e82fb5896b26e1","material_id":"coorstek-hp-aln","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":3260.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":3.26}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 24 (HP AlN), row Density","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C20"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-2c283fa7e1956037ca85","material_id":"coorstek-hp-aln","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":330000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":330.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 24 (HP AlN), row Elastic Modulus, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-80f20bf9d46f35833c58","material_id":"coorstek-hp-aln","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":80.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":80.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 24 (HP AlN), row Thermal Conductivity, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C408"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-820748938a8a4cf790cd","material_id":"coorstek-hp-aln","notes":"","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":340000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":340.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 24 (HP AlN), row Flexural Strength (MOR), 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM F417; four-point bend"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-dd66ecf8f299dc05f4a1","material_id":"coorstek-hp-aln","notes":"","property_id":"poissons_ratio","result":{"canonical":{"unit":"1","value":0.25},"kind":"point","reported":{"significant_figures":2,"unit":"1","value":0.25}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 24 (HP AlN), row Poisson’s Ratio, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":373.15},"id":"obs-59bc4f84ac78f5776dab","material_id":"coorstek-hp-aln","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":740.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":740.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 24 (HP AlN), row Specific Heat, 100 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM E1269"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-f4c9b19a9592ae21457e","material_id":"coorstek-sn-101c","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":3210.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":3.21}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 25 (SN 101C), row Density","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C20"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-5810528c9fbd4764a030","material_id":"coorstek-sn-101c","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":310000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":310.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 25 (SN 101C), row Elastic Modulus, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-82addd609a46d5e58288","material_id":"coorstek-sn-101c","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":34.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":34.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 25 (SN 101C), row Thermal Conductivity, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C408"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-fecf1a5903cfa69c4ab3","material_id":"coorstek-sn-101c","notes":"","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":1000000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":1000.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 25 (SN 101C), row Flexural Strength (MOR), 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM F417; four-point bend"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-7967f5143ca5b75c1156","material_id":"coorstek-sn-101c","notes":"","property_id":"poissons_ratio","result":{"canonical":{"unit":"1","value":0.27},"kind":"point","reported":{"significant_figures":2,"unit":"1","value":0.27}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 25 (SN 101C), row Poisson’s Ratio, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-650c75bf6a3284d62824","material_id":"coorstek-nbd-200","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":3160.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":3.16}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 26 (NBD-200), row Density","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C20"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-0d728fbbc59fa7251ee3","material_id":"coorstek-nbd-200","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":320000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":320.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 26 (NBD-200), row Elastic Modulus, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-58487a48840a72b78f63","material_id":"coorstek-nbd-200","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":29.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":29.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 26 (NBD-200), row Thermal Conductivity, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C408"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-f07d726fa7d330d90846","material_id":"coorstek-nbd-200","notes":"","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":900000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":900.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 26 (NBD-200), row Flexural Strength (MOR), 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM F417; four-point bend"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-7013b0822c9683f9edd8","material_id":"coorstek-nbd-200","notes":"","property_id":"poissons_ratio","result":{"canonical":{"unit":"1","value":0.26},"kind":"point","reported":{"significant_figures":2,"unit":"1","value":0.26}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 26 (NBD-200), row Poisson’s Ratio, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-edc9249f82b95afb2257","material_id":"coorstek-nt-154","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":3220.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":3.22}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 27 (NT 154), row Density","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C20"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-c1fba99ebccc5854364a","material_id":"coorstek-nt-154","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":310000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":310.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 27 (NT 154), row Elastic Modulus, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-c8ae69dd7b5d45abeb49","material_id":"coorstek-nt-154","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":38.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":38.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 27 (NT 154), row Thermal Conductivity, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C408"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-1b608037f28c2105368d","material_id":"coorstek-nt-154","notes":"","property_id":"flexural_strength","result":{"canonical":{"unit":"Pa","value":900000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":900.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 27 (NT 154), row Flexural Strength (MOR), 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM F417; four-point bend"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-cde392c04700c44df2b3","material_id":"coorstek-nt-154","notes":"","property_id":"poissons_ratio","result":{"canonical":{"unit":"1","value":0.27},"kind":"point","reported":{"significant_figures":2,"unit":"1","value":0.27}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 27 (NT 154), row Poisson’s Ratio, 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM C848"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":373.15},"id":"obs-977761b267059eab1dd4","material_id":"coorstek-nt-154","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":724.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":724.0}},"source_id":"coorstek","source_locator":{"label":"Page 1, column 27 (NT 154), row Specific Heat, 100 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM E1269"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-fce1969c6006558f33eb","material_id":"stainless-core-304-4301","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":230000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":230.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 304/4301, product form C, row Table 5, Rp0.2","page":8},"state_id":"stainless-core-304-4301-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-e1730efbb68a89e0b3e0","material_id":"stainless-core-304-4301","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":750000000.0,"minimum":540000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":750.0,"minimum":540.0,"significant_figures":3,"unit":"MPa"}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 304/4301, product form C, row Table 5, Rm","page":8},"state_id":"stainless-core-304-4301-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-7c93b5563829a430b062","material_id":"stainless-core-304-4301","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.45},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":45.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 304/4301, product form C, row Table 5, A80 (80 mm gauge length)","page":8},"state_id":"stainless-core-304-4301-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-f3ee5ec2e3419eeb50c8","material_id":"stainless-core-304-4301","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7900.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.9}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 304/4301, row Table 7, Density","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-6f47de9d69396a488f1a","material_id":"stainless-core-304-4301","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":200000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":200.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 304/4301, row Table 7, Modulus of elasticity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-26cd0079e2bd25180773","material_id":"stainless-core-304-4301","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 304/4301, row Table 7, Thermal conductivity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-8e6e51ad2aca5d8ef007","material_id":"stainless-core-304-4301","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":500.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":500.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 304/4301, row Table 7, Thermal capacity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-65e5f52338938d1e3496","material_id":"stainless-core-304l-4307","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":220000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":220.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 304L/4307, product form C, row Table 5, Rp0.2","page":8},"state_id":"stainless-core-304l-4307-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-e0c080897fdd884a3995","material_id":"stainless-core-304l-4307","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":700000000.0,"minimum":520000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":700.0,"minimum":520.0,"significant_figures":3,"unit":"MPa"}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 304L/4307, product form C, row Table 5, Rm","page":8},"state_id":"stainless-core-304l-4307-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-30353993057aa441601f","material_id":"stainless-core-304l-4307","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.45},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":45.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 304L/4307, product form C, row Table 5, A80 (80 mm gauge length)","page":8},"state_id":"stainless-core-304l-4307-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-b35538fb7617e3dc3436","material_id":"stainless-core-304l-4307","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7900.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.9}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 304L/4307, row Table 7, Density","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-15840a0046a47320ba09","material_id":"stainless-core-304l-4307","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":200000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":200.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 304L/4307, row Table 7, Modulus of elasticity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-cc25483ad3211a8a2637","material_id":"stainless-core-304l-4307","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 304L/4307, row Table 7, Thermal conductivity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-af5fad3384a7269b0c93","material_id":"stainless-core-304l-4307","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":500.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":500.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 304L/4307, row Table 7, Thermal capacity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-9c11abbd5f21f0861b07","material_id":"stainless-core-304ln-4311","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":290000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":290.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 304LN/4311, product form C, row Table 5, Rp0.2","page":8},"state_id":"stainless-core-304ln-4311-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-9b603e04b1c9cc550b8a","material_id":"stainless-core-304ln-4311","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":750000000.0,"minimum":550000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":750.0,"minimum":550.0,"significant_figures":3,"unit":"MPa"}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 304LN/4311, product form C, row Table 5, Rm","page":8},"state_id":"stainless-core-304ln-4311-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-90b5b6eb8762516112bc","material_id":"stainless-core-304ln-4311","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.4},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":40.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 304LN/4311, product form C, row Table 5, A80 (80 mm gauge length)","page":8},"state_id":"stainless-core-304ln-4311-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-c84af4655a117b5ee129","material_id":"stainless-core-304ln-4311","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7900.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.9}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 304LN/4311, row Table 7, Density","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-e07cd688784451f093b4","material_id":"stainless-core-304ln-4311","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":200000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":200.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 304LN/4311, row Table 7, Modulus of elasticity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-00f9e02678500e7d4380","material_id":"stainless-core-304ln-4311","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 304LN/4311, row Table 7, Thermal conductivity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-eb67ad1392de6e57b1ea","material_id":"stainless-core-304ln-4311","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":500.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":500.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 304LN/4311, row Table 7, Thermal capacity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-32dff2fe712e485654bf","material_id":"stainless-core-304l-4306","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":220000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":220.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 304L/4306, product form C, row Table 5, Rp0.2","page":8},"state_id":"stainless-core-304l-4306-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-8909fafa773da1404553","material_id":"stainless-core-304l-4306","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":700000000.0,"minimum":520000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":700.0,"minimum":520.0,"significant_figures":3,"unit":"MPa"}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 304L/4306, product form C, row Table 5, Rm","page":8},"state_id":"stainless-core-304l-4306-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-149635fd5cadc00fb682","material_id":"stainless-core-304l-4306","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.45},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":45.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 304L/4306, product form C, row Table 5, A80 (80 mm gauge length)","page":8},"state_id":"stainless-core-304l-4306-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-59beb7ec5b0bd8c8048b","material_id":"stainless-core-304l-4306","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7900.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.9}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 304L/4306, row Table 7, Density","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-04a483da2392dd70423f","material_id":"stainless-core-304l-4306","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":200000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":200.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 304L/4306, row Table 7, Modulus of elasticity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-2fcad69a495c5aceccbb","material_id":"stainless-core-304l-4306","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 304L/4306, row Table 7, Thermal conductivity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-0eca03302b62b6729a3c","material_id":"stainless-core-304l-4306","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":500.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":500.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 304L/4306, row Table 7, Thermal capacity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-a64ac73e9de940de4c92","material_id":"stainless-core-305-4303","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":220000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":220.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 305/4303, product form C, row Table 5, Rp0.2","page":8},"state_id":"stainless-core-305-4303-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-34cd28034f12b04a649b","material_id":"stainless-core-305-4303","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":650000000.0,"minimum":500000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":650.0,"minimum":500.0,"significant_figures":3,"unit":"MPa"}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 305/4303, product form C, row Table 5, Rm","page":8},"state_id":"stainless-core-305-4303-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-0eee57e772c6547a7ba3","material_id":"stainless-core-305-4303","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.45},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":45.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 305/4303, product form C, row Table 5, A80 (80 mm gauge length)","page":8},"state_id":"stainless-core-305-4303-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-6cdfd2c8059963ed3631","material_id":"stainless-core-305-4303","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7900.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.9}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 305/4303, row Table 7, Density","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-6c9a765ffd9cc12f393f","material_id":"stainless-core-305-4303","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":200000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":200.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 305/4303, row Table 7, Modulus of elasticity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-5ee358ba7ebeb1e3e1af","material_id":"stainless-core-305-4303","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 305/4303, row Table 7, Thermal conductivity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-29c9155c27cdefd60192","material_id":"stainless-core-305-4303","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":500.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":500.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 305/4303, row Table 7, Thermal capacity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-5d62866961c02adc5dd5","material_id":"stainless-core-321-4541","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":220000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":220.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 321/4541, product form C, row Table 5, Rp0.2","page":8},"state_id":"stainless-core-321-4541-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-eb8ab50d88625ed3777c","material_id":"stainless-core-321-4541","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":720000000.0,"minimum":520000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":720.0,"minimum":520.0,"significant_figures":3,"unit":"MPa"}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 321/4541, product form C, row Table 5, Rm","page":8},"state_id":"stainless-core-321-4541-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-38a0ec71e4dc71be85bd","material_id":"stainless-core-321-4541","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.4},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":40.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 321/4541, product form C, row Table 5, A80 (80 mm gauge length)","page":8},"state_id":"stainless-core-321-4541-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-e11046d0359774cc9ac0","material_id":"stainless-core-321-4541","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7900.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.9}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 321/4541, row Table 7, Density","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-76c071b4857f884b220e","material_id":"stainless-core-321-4541","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":200000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":200.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 321/4541, row Table 7, Modulus of elasticity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-b97cd027da946dbdc203","material_id":"stainless-core-321-4541","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 321/4541, row Table 7, Thermal conductivity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-8e8d9f197a61e86b99c9","material_id":"stainless-core-321-4541","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":500.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":500.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 321/4541, row Table 7, Thermal capacity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-5c718f214dc5a3a1d562","material_id":"stainless-core-347-4550","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":220000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":220.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 347/4550, product form C, row Table 5, Rp0.2","page":8},"state_id":"stainless-core-347-4550-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-4f06ad628f5fb9fbc495","material_id":"stainless-core-347-4550","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":720000000.0,"minimum":520000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":720.0,"minimum":520.0,"significant_figures":3,"unit":"MPa"}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 347/4550, product form C, row Table 5, Rm","page":8},"state_id":"stainless-core-347-4550-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-1d9996d1076df8d876d9","material_id":"stainless-core-347-4550","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.4},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":40.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 347/4550, product form C, row Table 5, A80 (80 mm gauge length)","page":8},"state_id":"stainless-core-347-4550-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-4daa2df989576ebc4ea3","material_id":"stainless-core-347-4550","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7900.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.9}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 347/4550, row Table 7, Density","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-86053d75e012ece7a3e3","material_id":"stainless-core-347-4550","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":200000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":200.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 347/4550, row Table 7, Modulus of elasticity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-9c0712e8260e90b651a0","material_id":"stainless-core-347-4550","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 347/4550, row Table 7, Thermal conductivity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-bb4976d1ea008e924e6b","material_id":"stainless-core-347-4550","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":500.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":500.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 347/4550, row Table 7, Thermal capacity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-cd2537247c46834babe5","material_id":"stainless-core-301ln-4318","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":350000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":350.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 301LN/4318, product form C, row Table 5, Rp0.2","page":8},"state_id":"stainless-core-301ln-4318-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-aa2e800a4b4dede582d8","material_id":"stainless-core-301ln-4318","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":850000000.0,"minimum":650000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":850.0,"minimum":650.0,"significant_figures":3,"unit":"MPa"}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 301LN/4318, product form C, row Table 5, Rm","page":8},"state_id":"stainless-core-301ln-4318-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-95c5eb6071cf44396e7d","material_id":"stainless-core-301ln-4318","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.35000000000000003},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":35.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 301LN/4318, product form C, row Table 5, A80 (80 mm gauge length)","page":8},"state_id":"stainless-core-301ln-4318-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-d4472d362ec913bacbcb","material_id":"stainless-core-301ln-4318","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7900.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.9}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 301LN/4318, row Table 7, Density","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-496f6e634f991a0d5d6b","material_id":"stainless-core-301ln-4318","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":200000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":200.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 301LN/4318, row Table 7, Modulus of elasticity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-b1556e210821d6580471","material_id":"stainless-core-301ln-4318","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 301LN/4318, row Table 7, Thermal conductivity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-cedb062ee7273b747414","material_id":"stainless-core-301ln-4318","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":500.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":500.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 301LN/4318, row Table 7, Thermal capacity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-d02dcaeae5833518a4ef","material_id":"stainless-core-301-4310","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":250000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":250.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 301/4310, product form C, row Table 5, Rp0.2","page":8},"state_id":"stainless-core-301-4310-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-9c540013195311fd1f32","material_id":"stainless-core-301-4310","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":950000000.0,"minimum":600000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":950.0,"minimum":600.0,"significant_figures":3,"unit":"MPa"}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 301/4310, product form C, row Table 5, Rm","page":8},"state_id":"stainless-core-301-4310-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-d844fe240620ea47eea1","material_id":"stainless-core-301-4310","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.4},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":40.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 301/4310, product form C, row Table 5, A80 (80 mm gauge length)","page":8},"state_id":"stainless-core-301-4310-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-29715d2d160206b6c980","material_id":"stainless-core-301-4310","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7900.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.9}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 301/4310, row Table 7, Density","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-aa7fbf1a2ef33e52baa0","material_id":"stainless-core-301-4310","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":200000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":200.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 301/4310, row Table 7, Modulus of elasticity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-73df096c52dc3dad7edb","material_id":"stainless-core-301-4310","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 301/4310, row Table 7, Thermal conductivity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-85c9327cfb8ae686d01f","material_id":"stainless-core-301-4310","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":500.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":500.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 301/4310, row Table 7, Thermal capacity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-ed2b972c2f90efbe0e4c","material_id":"stainless-core-201-4372","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":350000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":350.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 201/4372, product form C, row Table 5, Rp0.2","page":8},"state_id":"stainless-core-201-4372-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-e32e197791ac697fcde4","material_id":"stainless-core-201-4372","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":880000000.0,"minimum":680000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":880.0,"minimum":680.0,"significant_figures":3,"unit":"MPa"}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 201/4372, product form C, row Table 5, Rm","page":8},"state_id":"stainless-core-201-4372-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-999309d730fc38c5fb26","material_id":"stainless-core-201-4372","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.45},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":45.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 201/4372, product form C, row Table 5, A80 (80 mm gauge length)","page":8},"state_id":"stainless-core-201-4372-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-4989b66610e422dd565a","material_id":"stainless-core-201-4372","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7800.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.8}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 201/4372, row Table 7, Density","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-9dc82457e31cec04e7ac","material_id":"stainless-core-201-4372","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":200000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":200.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 201/4372, row Table 7, Modulus of elasticity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-c8377c3f07a46e1c182f","material_id":"stainless-core-201-4372","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 201/4372, row Table 7, Thermal conductivity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-c886c0e853409b0943be","material_id":"stainless-core-201ln-4372","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":350000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":350.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 201LN/4372, product form C, row Table 5, Rp0.2","page":8},"state_id":"stainless-core-201ln-4372-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-291886338316aeabb9a9","material_id":"stainless-core-201ln-4372","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":880000000.0,"minimum":680000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":880.0,"minimum":680.0,"significant_figures":3,"unit":"MPa"}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 201LN/4372, product form C, row Table 5, Rm","page":8},"state_id":"stainless-core-201ln-4372-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-51b12d3163c058a6760a","material_id":"stainless-core-201ln-4372","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.45},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":45.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 201LN/4372, product form C, row Table 5, A80 (80 mm gauge length)","page":8},"state_id":"stainless-core-201ln-4372-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-f5843f323610609d6910","material_id":"stainless-core-201ln-4372","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7800.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.8}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 201LN/4372, row Table 7, Density","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-67c5c3a1fe7686ddb84c","material_id":"stainless-core-201ln-4372","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":200000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":200.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 201LN/4372, row Table 7, Modulus of elasticity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-f0019486c5ec4a839249","material_id":"stainless-core-201ln-4372","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 201LN/4372, row Table 7, Thermal conductivity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-741d9ea378875c96e247","material_id":"stainless-core-441-4509","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":250000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":250.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 441/4509, product form C, row Table 5, Rp0.2","page":8},"state_id":"stainless-core-441-4509-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-88df3fe22be4898de263","material_id":"stainless-core-441-4509","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":630000000.0,"minimum":430000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":630.0,"minimum":430.0,"significant_figures":3,"unit":"MPa"}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 441/4509, product form C, row Table 5, Rm","page":8},"state_id":"stainless-core-441-4509-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-ef3fb6c78cf9536634e4","material_id":"stainless-core-441-4509","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.18},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":18.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 441/4509, product form C, row Table 5, A80 (80 mm gauge length)","page":8},"state_id":"stainless-core-441-4509-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-9c5df414faa023291749","material_id":"stainless-core-441-4509","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7700.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.7}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 441/4509, row Table 7, Density","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-c55bb33dd3c82fd6e306","material_id":"stainless-core-441-4509","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":220000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":220.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 441/4509, row Table 7, Modulus of elasticity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-d5bee7e86783717200f7","material_id":"stainless-core-441-4509","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":25.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":25.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 441/4509, row Table 7, Thermal conductivity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-473dcbb1c7c2a3939788","material_id":"stainless-core-441-4509","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":460.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":460.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 441/4509, row Table 7, Thermal capacity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-52afd2b09cf67b6241de","material_id":"stainless-core-439m","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":205000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":205.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 439M, product form C*, row Table 5, Rp0.2","page":8},"state_id":"stainless-core-439m-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM A240"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-3a518f54fb9bff4bf756","material_id":"stainless-core-439m","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":415000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":415.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 439M, product form C*, row Table 5, Rm","page":8},"state_id":"stainless-core-439m-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM A240"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-2aafa5c8bd5458071dfb","material_id":"stainless-core-439m","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.22},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":22.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 439M, product form C*, row Table 5, A80 (80 mm gauge length)","page":8},"state_id":"stainless-core-439m-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ASTM A240"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-1eed26351d74d7c816fd","material_id":"stainless-core-439m","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7700.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.7}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 439M, row Table 7, Density","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values (Table 7 footnote)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-94decc163d0e0926d88d","material_id":"stainless-core-439m","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":220000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":220.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 439M, row Table 7, Modulus of elasticity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values (Table 7 footnote)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-036e754c8d71c86fb9dd","material_id":"stainless-core-439m","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":25.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":25.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 439M, row Table 7, Thermal conductivity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values (Table 7 footnote)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-ddfc528508a89db32807","material_id":"stainless-core-439m","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":460.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":460.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 439M, row Table 7, Thermal capacity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values (Table 7 footnote)"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-99cbdd7d271565ca2b7e","material_id":"stainless-core-4622","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":300000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":300.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 4622, product form C**, row Table 5, Rp0.2","page":8},"state_id":"stainless-core-4622-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10028-7"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-b0eccd62601941814a39","material_id":"stainless-core-4622","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":630000000.0,"minimum":430000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":630.0,"minimum":430.0,"significant_figures":3,"unit":"MPa"}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 4622, product form C**, row Table 5, Rm","page":8},"state_id":"stainless-core-4622-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10028-7"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-9bbe63c52128cf15b5f9","material_id":"stainless-core-4622","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.22},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":22.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 8, Core 4622, product form C**, row Table 5, A80 (80 mm gauge length)","page":8},"state_id":"stainless-core-4622-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10028-7"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-3597e663e5e9614a1b3e","material_id":"stainless-core-4622","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7700.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.7}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 4622, row Table 7, Density","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values (Table 7 footnote)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-acba2157823c173e3b17","material_id":"stainless-core-4622","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":220000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":220.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 4622, row Table 7, Modulus of elasticity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values (Table 7 footnote)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-47e72103dede43121686","material_id":"stainless-core-4622","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":21.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":21.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 4622, row Table 7, Thermal conductivity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values (Table 7 footnote)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-823206892f5ebffc9450","material_id":"stainless-core-4622","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":460.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":460.0}},"source_id":"outokumpu-core","source_locator":{"label":"Page 10, Core 4622, row Table 7, Thermal capacity at 20 °C","page":10},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values (Table 7 footnote)"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-03aef7fc6ff88cc5db0d","material_id":"stainless-supra-316-4401","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":240000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":240.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 6, Supra 316/4401, product form C, row Table 5, Rp0.2","page":6},"state_id":"stainless-supra-316-4401-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-e99f66cf7460f01702ac","material_id":"stainless-supra-316-4401","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":680000000.0,"minimum":530000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":680.0,"minimum":530.0,"significant_figures":3,"unit":"MPa"}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 6, Supra 316/4401, product form C, row Table 5, Rm","page":6},"state_id":"stainless-supra-316-4401-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-e33b327df53475a79953","material_id":"stainless-supra-316-4401","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.4},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":40.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 6, Supra 316/4401, product form C, row Table 5, A80 (80 mm gauge length)","page":6},"state_id":"stainless-supra-316-4401-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-1af4fdfa05e3294e380e","material_id":"stainless-supra-316-4401","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8000.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":8.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 316/4401, row Table 7, Density","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-068a244d2eb59c5d82e0","material_id":"stainless-supra-316-4401","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":200000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":200.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 316/4401, row Table 7, Modulus of elasticity at 20 °C","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-00e330482a211b161d34","material_id":"stainless-supra-316-4401","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 316/4401, row Table 7, Thermal conductivity at 20 °C","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-1bbfdd9a9b6e9268c516","material_id":"stainless-supra-316-4401","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":500.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":500.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 316/4401, row Table 7, Thermal capacity at 20 °C","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-7e9e062a8ec5486ec308","material_id":"stainless-supra-316l-4404","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":240000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":240.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 6, Supra 316L/4404, product form C, row Table 5, Rp0.2","page":6},"state_id":"stainless-supra-316l-4404-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-a919ddc3354647747a3d","material_id":"stainless-supra-316l-4404","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":680000000.0,"minimum":530000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":680.0,"minimum":530.0,"significant_figures":3,"unit":"MPa"}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 6, Supra 316L/4404, product form C, row Table 5, Rm","page":6},"state_id":"stainless-supra-316l-4404-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-0d38ea3c464b54398222","material_id":"stainless-supra-316l-4404","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.4},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":40.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 6, Supra 316L/4404, product form C, row Table 5, A80 (80 mm gauge length)","page":6},"state_id":"stainless-supra-316l-4404-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-7c579fcc8fc28f7ed880","material_id":"stainless-supra-316l-4404","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8000.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":8.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 316L/4404, row Table 7, Density","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-c8ab791788cb06174b95","material_id":"stainless-supra-316l-4404","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":200000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":200.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 316L/4404, row Table 7, Modulus of elasticity at 20 °C","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-0494d93acda9f5403169","material_id":"stainless-supra-316l-4404","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 316L/4404, row Table 7, Thermal conductivity at 20 °C","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-27f21007e06992621e7d","material_id":"stainless-supra-316l-4404","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":500.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":500.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 316L/4404, row Table 7, Thermal capacity at 20 °C","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-4773c4f0ce247cc3c230","material_id":"stainless-supra-316plus","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":350000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":350.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 6, Supra 316plus, product form C*, row Table 5, Rp0.2","page":6},"state_id":"stainless-supra-316plus-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10028-7"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-2858e353671c0d915ce3","material_id":"stainless-supra-316plus","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":850000000.0,"minimum":650000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":850.0,"minimum":650.0,"significant_figures":3,"unit":"MPa"}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 6, Supra 316plus, product form C*, row Table 5, Rm","page":6},"state_id":"stainless-supra-316plus-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10028-7"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-e045cae3b7f9e959ae53","material_id":"stainless-supra-316plus","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.35000000000000003},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":35.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 6, Supra 316plus, product form C*, row Table 5, A80 (80 mm gauge length)","page":6},"state_id":"stainless-supra-316plus-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10028-7"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-e7f5695f25a4da09318a","material_id":"stainless-supra-316plus","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7900.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.9}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 316plus, row Table 7, Density","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values (Table 7 footnote)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-800fc479dfd61e7d94a7","material_id":"stainless-supra-316plus","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":200000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":200.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 316plus, row Table 7, Modulus of elasticity at 20 °C","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values (Table 7 footnote)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-105157beaa9780af5ab4","material_id":"stainless-supra-316plus","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 316plus, row Table 7, Thermal conductivity at 20 °C","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values (Table 7 footnote)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-f44d4138324c5884c180","material_id":"stainless-supra-316plus","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":500.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":500.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 316plus, row Table 7, Thermal capacity at 20 °C","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values (Table 7 footnote)"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-6111d48f77a0436f1e94","material_id":"stainless-supra-316-4436","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":240000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":240.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 6, Supra 316/4436, product form C, row Table 5, Rp0.2","page":6},"state_id":"stainless-supra-316-4436-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-a2e968fa7f48cf6ab461","material_id":"stainless-supra-316-4436","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":700000000.0,"minimum":550000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":700.0,"minimum":550.0,"significant_figures":3,"unit":"MPa"}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 6, Supra 316/4436, product form C, row Table 5, Rm","page":6},"state_id":"stainless-supra-316-4436-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-ed8a0ddbec24f7e4ee04","material_id":"stainless-supra-316-4436","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.4},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":40.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 6, Supra 316/4436, product form C, row Table 5, A80 (80 mm gauge length)","page":6},"state_id":"stainless-supra-316-4436-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-f411322c099b72f23e8b","material_id":"stainless-supra-316-4436","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8000.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":8.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 316/4436, row Table 7, Density","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-28c9a472a9ca20c8332d","material_id":"stainless-supra-316-4436","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":200000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":200.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 316/4436, row Table 7, Modulus of elasticity at 20 °C","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-7975527240b3e33f64a0","material_id":"stainless-supra-316-4436","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 316/4436, row Table 7, Thermal conductivity at 20 °C","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-9b3c0987a4a63a089078","material_id":"stainless-supra-316-4436","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":500.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":500.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 316/4436, row Table 7, Thermal capacity at 20 °C","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-483cc4e0aaabfc5a3098","material_id":"stainless-supra-316l-4432","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":240000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":240.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 6, Supra 316L/4432, product form C, row Table 5, Rp0.2","page":6},"state_id":"stainless-supra-316l-4432-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-cb9fae3692cfa411397f","material_id":"stainless-supra-316l-4432","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":700000000.0,"minimum":550000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":700.0,"minimum":550.0,"significant_figures":3,"unit":"MPa"}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 6, Supra 316L/4432, product form C, row Table 5, Rm","page":6},"state_id":"stainless-supra-316l-4432-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-f8a8d32176f345b0ebda","material_id":"stainless-supra-316l-4432","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.4},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":40.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 6, Supra 316L/4432, product form C, row Table 5, A80 (80 mm gauge length)","page":6},"state_id":"stainless-supra-316l-4432-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-7663489849cf8f1848ae","material_id":"stainless-supra-316l-4432","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8000.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":8.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 316L/4432, row Table 7, Density","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-f20fc244eff25f4e52b2","material_id":"stainless-supra-316l-4432","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":200000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":200.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 316L/4432, row Table 7, Modulus of elasticity at 20 °C","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-eb87fb79482d981e7893","material_id":"stainless-supra-316l-4432","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 316L/4432, row Table 7, Thermal conductivity at 20 °C","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-cfdcb13b43aad839425b","material_id":"stainless-supra-316l-4432","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":500.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":500.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 316L/4432, row Table 7, Thermal capacity at 20 °C","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-ce7c0ef4c647827cffd6","material_id":"stainless-supra-316l-4435","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":240000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":240.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 6, Supra 316L/4435, product form C, row Table 5, Rp0.2","page":6},"state_id":"stainless-supra-316l-4435-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-b66ba88d8f2fbc91cf04","material_id":"stainless-supra-316l-4435","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":700000000.0,"minimum":550000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":700.0,"minimum":550.0,"significant_figures":3,"unit":"MPa"}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 6, Supra 316L/4435, product form C, row Table 5, Rm","page":6},"state_id":"stainless-supra-316l-4435-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-5fd4d054c45efc92e617","material_id":"stainless-supra-316l-4435","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.4},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":40.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 6, Supra 316L/4435, product form C, row Table 5, A80 (80 mm gauge length)","page":6},"state_id":"stainless-supra-316l-4435-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-4187dfb18f8632c9ba88","material_id":"stainless-supra-316l-4435","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8000.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":8.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 316L/4435, row Table 7, Density","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-0c90795177f4189410c5","material_id":"stainless-supra-316l-4435","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":200000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":200.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 316L/4435, row Table 7, Modulus of elasticity at 20 °C","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-cea7aee8a6f3ba3ccf70","material_id":"stainless-supra-316l-4435","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 316L/4435, row Table 7, Thermal conductivity at 20 °C","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-a1c2bc9a57009c6eba44","material_id":"stainless-supra-316l-4435","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":500.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":500.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 316L/4435, row Table 7, Thermal capacity at 20 °C","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-be077cdc2b4ca3a7fed3","material_id":"stainless-supra-316ti-4571","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":240000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":240.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 6, Supra 316Ti/4571, product form C, row Table 5, Rp0.2","page":6},"state_id":"stainless-supra-316ti-4571-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-7c79a7bba1b28d6a5d79","material_id":"stainless-supra-316ti-4571","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":690000000.0,"minimum":540000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":690.0,"minimum":540.0,"significant_figures":3,"unit":"MPa"}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 6, Supra 316Ti/4571, product form C, row Table 5, Rm","page":6},"state_id":"stainless-supra-316ti-4571-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-0c09e45c310195039742","material_id":"stainless-supra-316ti-4571","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.4},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":40.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 6, Supra 316Ti/4571, product form C, row Table 5, A80 (80 mm gauge length)","page":6},"state_id":"stainless-supra-316ti-4571-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-79739b6d1fcca3a2c2c3","material_id":"stainless-supra-316ti-4571","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8000.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":8.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 316Ti/4571, row Table 7, Density","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-6bc654ef62ff12fbd44a","material_id":"stainless-supra-316ti-4571","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":200000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":200.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 316Ti/4571, row Table 7, Modulus of elasticity at 20 °C","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-0966c47e5b4e617b5b58","material_id":"stainless-supra-316ti-4571","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 316Ti/4571, row Table 7, Thermal conductivity at 20 °C","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-1b51764915e21dfe040f","material_id":"stainless-supra-316ti-4571","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":500.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":500.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 316Ti/4571, row Table 7, Thermal capacity at 20 °C","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-62834de591dd3abfeab6","material_id":"stainless-supra-444-4521","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":320000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":320.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 6, Supra 444/4521, product form C, row Table 5, Rp0.2","page":6},"state_id":"stainless-supra-444-4521-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-2495d99fe5596b02f1ba","material_id":"stainless-supra-444-4521","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":640000000.0,"minimum":420000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":640.0,"minimum":420.0,"significant_figures":3,"unit":"MPa"}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 6, Supra 444/4521, product form C, row Table 5, Rm","page":6},"state_id":"stainless-supra-444-4521-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"sheet","temperature_K":293.15},"id":"obs-331ba57d37d6127439d6","material_id":"stainless-supra-444-4521","notes":"Cold rolled coil and sheet (C); datasheet delivery condition","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.2},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":20.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 6, Supra 444/4521, product form C, row Table 5, A80 (80 mm gauge length)","page":6},"state_id":"stainless-supra-444-4521-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-2ca7ba5c17de5570d226","material_id":"stainless-supra-444-4521","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7700.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.7}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 444/4521, row Table 7, Density","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-b6b62d45b65c9f45ed82","material_id":"stainless-supra-444-4521","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":220000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":220.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 444/4521, row Table 7, Modulus of elasticity at 20 °C","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-9c5582a3c2eeac37e786","material_id":"stainless-supra-444-4521","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":23.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":23.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 444/4521, row Table 7, Thermal conductivity at 20 °C","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-86f460c27b3786c43822","material_id":"stainless-supra-444-4521","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":430.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":430.0}},"source_id":"outokumpu-supra","source_locator":{"label":"Page 8, Supra 444/4521, row Table 7, Thermal capacity at 20 °C","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-9823e4a767f62f399ea1","material_id":"stainless-forta-dx-2205","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7800.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.8}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 12, Forta DX 2205, row Table 9, Density","page":12},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-05788c78a6b360476b7a","material_id":"stainless-forta-dx-2205","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":200000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":200.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 12, Forta DX 2205, row Table 9, Modulus of elasticity at 20 °C","page":12},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-8405746aa77695faf100","material_id":"stainless-forta-dx-2205","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 12, Forta DX 2205, row Table 9, Thermal conductivity at 20 °C","page":12},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-7d0eb3d90ce2a03a4f0d","material_id":"stainless-forta-dx-2205","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":500.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":500.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 12, Forta DX 2205, row Table 9, Thermal capacity at 20 °C","page":12},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"coil"},"id":"obs-d8556a56fc7d354eb964","material_id":"stainless-forta-dx-2205","notes":"Cold rolled coil (C); datasheet delivery condition","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":500000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":500.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 9, Forta DX 2205, Cold rolled coil (C), row Table 5, Rp0.2","page":9},"state_id":"stainless-forta-dx-2205-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"coil"},"id":"obs-1360b8dfd38a05d5f4c3","material_id":"stainless-forta-dx-2205","notes":"Cold rolled coil (C); datasheet delivery condition","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":950000000.0,"minimum":700000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":950.0,"minimum":700.0,"significant_figures":3,"unit":"MPa"}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 9, Forta DX 2205, Cold rolled coil (C), row Table 5, Rm","page":9},"state_id":"stainless-forta-dx-2205-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"coil"},"id":"obs-8f4c877d3bd7d1dc0ad6","material_id":"stainless-forta-dx-2205","notes":"Cold rolled coil (C); datasheet delivery condition","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.2},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":20.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 9, Forta DX 2205, Cold rolled coil (C), row Table 5, A80, gauge length 80 mm","page":9},"state_id":"stainless-forta-dx-2205-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-07b6f91afc20e6168230","material_id":"stainless-forta-ldx-2101","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7700.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.7}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 12, Forta LDX 2101, row Table 9, Density","page":12},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-0f9e6038da3c7a24208e","material_id":"stainless-forta-ldx-2101","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":205000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":205.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 12, Forta LDX 2101, row Table 9, Modulus of elasticity at 20 °C","page":12},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-66ee4463df05283c990d","material_id":"stainless-forta-ldx-2101","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 12, Forta LDX 2101, row Table 9, Thermal conductivity at 20 °C","page":12},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-e689373e204a428f23d0","material_id":"stainless-forta-ldx-2101","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":500.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":500.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 12, Forta LDX 2101, row Table 9, Thermal capacity at 20 °C","page":12},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"coil"},"id":"obs-18581d7cfabe8bf9f226","material_id":"stainless-forta-ldx-2101","notes":"Cold rolled coil (C); datasheet delivery condition","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":530000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":530.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 9, Forta LDX 2101, Cold rolled coil (C), row Table 5, Rp0.2","page":9},"state_id":"stainless-forta-ldx-2101-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"coil"},"id":"obs-7c49e560079cf24fda1b","material_id":"stainless-forta-ldx-2101","notes":"Cold rolled coil (C); datasheet delivery condition","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":900000000.0,"minimum":700000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":900.0,"minimum":700.0,"significant_figures":3,"unit":"MPa"}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 9, Forta LDX 2101, Cold rolled coil (C), row Table 5, Rm","page":9},"state_id":"stainless-forta-ldx-2101-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"coil"},"id":"obs-80cc924cf73c2de38e1b","material_id":"stainless-forta-ldx-2101","notes":"Cold rolled coil (C); datasheet delivery condition","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.2},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":20.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 9, Forta LDX 2101, Cold rolled coil (C), row Table 5, A80, gauge length 80 mm","page":9},"state_id":"stainless-forta-ldx-2101-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-a22349fcc101661ef815","material_id":"stainless-forta-dx-2304","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7800.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.8}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 12, Forta DX 2304, row Table 9, Density","page":12},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-5eea0946f0ac64477ace","material_id":"stainless-forta-dx-2304","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":200000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":200.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 12, Forta DX 2304, row Table 9, Modulus of elasticity at 20 °C","page":12},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-7923b0bc0445df178f37","material_id":"stainless-forta-dx-2304","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 12, Forta DX 2304, row Table 9, Thermal conductivity at 20 °C","page":12},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-224cbd53d42c2e1bc20b","material_id":"stainless-forta-dx-2304","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":500.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":500.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 12, Forta DX 2304, row Table 9, Thermal capacity at 20 °C","page":12},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"coil"},"id":"obs-b209c3969e2d5a962081","material_id":"stainless-forta-dx-2304","notes":"Cold rolled coil (C); datasheet delivery condition","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":450000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":450.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 9, Forta DX 2304, Cold rolled coil (C), row Table 5, Rp0.2","page":9},"state_id":"stainless-forta-dx-2304-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"coil"},"id":"obs-679adc20d63860e46201","material_id":"stainless-forta-dx-2304","notes":"Cold rolled coil (C); datasheet delivery condition","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":850000000.0,"minimum":650000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":850.0,"minimum":650.0,"significant_figures":3,"unit":"MPa"}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 9, Forta DX 2304, Cold rolled coil (C), row Table 5, Rm","page":9},"state_id":"stainless-forta-dx-2304-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"coil"},"id":"obs-c80c469f34fecdf58ddd","material_id":"stainless-forta-dx-2304","notes":"Cold rolled coil (C); datasheet delivery condition","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.2},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":20.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 9, Forta DX 2304, Cold rolled coil (C), row Table 5, A80, gauge length 80 mm","page":9},"state_id":"stainless-forta-dx-2304-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-84491af69cf326402eaa","material_id":"stainless-forta-edx-2304","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7800.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.8}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 12, Forta EDX 2304, row Table 9, Density","page":12},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-138ab186fd05dd496269","material_id":"stainless-forta-edx-2304","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":200000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":200.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 12, Forta EDX 2304, row Table 9, Modulus of elasticity at 20 °C","page":12},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-32734e34feefc9df7616","material_id":"stainless-forta-edx-2304","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 12, Forta EDX 2304, row Table 9, Thermal conductivity at 20 °C","page":12},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-0a12b1b93eb558007727","material_id":"stainless-forta-edx-2304","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":500.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":500.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 12, Forta EDX 2304, row Table 9, Thermal capacity at 20 °C","page":12},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"coil"},"id":"obs-95ee13dad923c15edde0","material_id":"stainless-forta-edx-2304","notes":"Cold rolled coil (C); datasheet delivery condition","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":500000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":500.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 9, Forta EDX 2304, Cold rolled coil (C) 2), row Table 5, Rp0.2","page":9},"state_id":"stainless-forta-edx-2304-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu MDS-D35 (footnote 2)"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"coil"},"id":"obs-5671abba24cdc76c8488","material_id":"stainless-forta-edx-2304","notes":"Cold rolled coil (C); datasheet delivery condition","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":690000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":690.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 9, Forta EDX 2304, Cold rolled coil (C) 2), row Table 5, Rm","page":9},"state_id":"stainless-forta-edx-2304-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu MDS-D35 (footnote 2)"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"coil"},"id":"obs-0f5a8c961ed1487ca950","material_id":"stainless-forta-edx-2304","notes":"Cold rolled coil (C); datasheet delivery condition","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.25},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":25.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 9, Forta EDX 2304, Cold rolled coil (C) 2), row Table 5, A5, gauge length 5.65√S0","page":9},"state_id":"stainless-forta-edx-2304-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu MDS-D35 (footnote 2)"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-e85a39e1e1cbb5d9e5dc","material_id":"stainless-forta-ldx-2404","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7700.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.7}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 12, Forta LDX 2404, row Table 9, Density","page":12},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-92eb212f2e111f2883ac","material_id":"stainless-forta-ldx-2404","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":205000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":205.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 12, Forta LDX 2404, row Table 9, Modulus of elasticity at 20 °C","page":12},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-05eae20253ec063f2f3e","material_id":"stainless-forta-ldx-2404","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 12, Forta LDX 2404, row Table 9, Thermal conductivity at 20 °C","page":12},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-9cb7be706a75d31d9c87","material_id":"stainless-forta-ldx-2404","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":500.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":500.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 12, Forta LDX 2404, row Table 9, Thermal capacity at 20 °C","page":12},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"coil"},"id":"obs-49aff23c4b4c6b12a752","material_id":"stainless-forta-ldx-2404","notes":"Cold rolled coil (C); datasheet delivery condition","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":550000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":550.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 9, Forta LDX 2404, Cold rolled coil (C), row Table 5, Rp0.2","page":9},"state_id":"stainless-forta-ldx-2404-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"coil"},"id":"obs-d535470b93a0b9097cee","material_id":"stainless-forta-ldx-2404","notes":"Cold rolled coil (C); datasheet delivery condition","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":900000000.0,"minimum":750000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":900.0,"minimum":750.0,"significant_figures":3,"unit":"MPa"}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 9, Forta LDX 2404, Cold rolled coil (C), row Table 5, Rm","page":9},"state_id":"stainless-forta-ldx-2404-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"coil"},"id":"obs-d3af6664ca06fbe03410","material_id":"stainless-forta-ldx-2404","notes":"Cold rolled coil (C); datasheet delivery condition","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.2},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":20.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 9, Forta LDX 2404, Cold rolled coil (C), row Table 5, A80, gauge length 80 mm","page":9},"state_id":"stainless-forta-ldx-2404-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-79feb542bb8cc82a8082","material_id":"stainless-forta-sdx-100","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7800.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.8}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 12, Forta SDX 100, row Table 9, Density","page":12},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-5a09e230b18e830f4bcb","material_id":"stainless-forta-sdx-100","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":200000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":200.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 12, Forta SDX 100, row Table 9, Modulus of elasticity at 20 °C","page":12},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-1177c429c369b2361a08","material_id":"stainless-forta-sdx-100","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 12, Forta SDX 100, row Table 9, Thermal conductivity at 20 °C","page":12},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-32034130901d04c3a754","material_id":"stainless-forta-sdx-100","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":500.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":500.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 12, Forta SDX 100, row Table 9, Thermal capacity at 20 °C","page":12},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"coil"},"id":"obs-979b1264946f05f2eb25","material_id":"stainless-forta-sdx-100","notes":"Cold rolled coil (C); datasheet delivery condition","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":550000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":550.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 9, Forta SDX 100, Cold rolled coil (C), row Table 5, Rp0.2","page":9},"state_id":"stainless-forta-sdx-100-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"coil"},"id":"obs-667d233e6ecab44b54b2","material_id":"stainless-forta-sdx-100","notes":"Cold rolled coil (C); datasheet delivery condition","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":1000000000.0,"minimum":750000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":1000.0,"minimum":750.0,"significant_figures":3,"unit":"MPa"}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 9, Forta SDX 100, Cold rolled coil (C), row Table 5, Rm","page":9},"state_id":"stainless-forta-sdx-100-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"coil"},"id":"obs-3d42df60646fa7948876","material_id":"stainless-forta-sdx-100","notes":"Cold rolled coil (C); datasheet delivery condition","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.2},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":20.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 9, Forta SDX 100, Cold rolled coil (C), row Table 5, A80, gauge length 80 mm","page":9},"state_id":"stainless-forta-sdx-100-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-d0b984b63edbed4ebff8","material_id":"stainless-forta-sdx-2507","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7800.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.8}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 12, Forta SDX 2507, row Table 9, Density","page":12},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-877fc7b2ee3448dc261f","material_id":"stainless-forta-sdx-2507","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":200000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":200.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 12, Forta SDX 2507, row Table 9, Modulus of elasticity at 20 °C","page":12},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-f52bedf995379b888a35","material_id":"stainless-forta-sdx-2507","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 12, Forta SDX 2507, row Table 9, Thermal conductivity at 20 °C","page":12},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-23dceb2d5be66c6a4a30","material_id":"stainless-forta-sdx-2507","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":500.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":500.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 12, Forta SDX 2507, row Table 9, Thermal capacity at 20 °C","page":12},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"coil"},"id":"obs-38dccab3b4c4ccb618f1","material_id":"stainless-forta-sdx-2507","notes":"Cold rolled coil (C); datasheet delivery condition","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":550000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":550.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 9, Forta SDX 2507, Cold rolled coil (C), row Table 5, Rp0.2","page":9},"state_id":"stainless-forta-sdx-2507-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"coil"},"id":"obs-e58ea36018d9f6ccf664","material_id":"stainless-forta-sdx-2507","notes":"Cold rolled coil (C); datasheet delivery condition","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":1000000000.0,"minimum":750000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":1000.0,"minimum":750.0,"significant_figures":3,"unit":"MPa"}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 9, Forta SDX 2507, Cold rolled coil (C), row Table 5, Rm","page":9},"state_id":"stainless-forta-sdx-2507-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"coil"},"id":"obs-1795ffd3522096338bc5","material_id":"stainless-forta-sdx-2507","notes":"Cold rolled coil (C); datasheet delivery condition","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.2},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":20.0}},"source_id":"outokumpu-forta","source_locator":{"label":"Page 9, Forta SDX 2507, Cold rolled coil (C), row Table 5, A80, gauge length 80 mm","page":9},"state_id":"stainless-forta-sdx-2507-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-873565359fcbfd841f9e","material_id":"stainless-therma-253-ma","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7800.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.8}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 253 MA, row Table 14, Density at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-e4b9ba561de8fc550b9f","material_id":"stainless-therma-253-ma","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":200000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":200.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 253 MA, row Table 14, Modulus of elasticity at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":873.15},"id":"obs-030881e3c0fdca83a53d","material_id":"stainless-therma-253-ma","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":155000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":155.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 253 MA, row Table 14, Modulus of elasticity at 600 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":1273.15},"id":"obs-ec51bd833c4eab7d2106","material_id":"stainless-therma-253-ma","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":120000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":120.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 253 MA, row Table 14, Modulus of elasticity at 1000 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-3c12e235c00fd929cea2","material_id":"stainless-therma-253-ma","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 253 MA, row Table 14, Thermal conductivity at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":773.15},"id":"obs-8f7c110c7784f0376f44","material_id":"stainless-therma-253-ma","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":21.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":21.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 253 MA, row Table 14, Thermal conductivity at 500 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":1073.15},"id":"obs-6d42f0e26d30ce5bdb93","material_id":"stainless-therma-253-ma","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":26.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":26.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 253 MA, row Table 14, Thermal conductivity at 800 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-feeec1be8955b0c918b8","material_id":"stainless-therma-253-ma","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":500.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":500.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 253 MA, row Table 14, Thermal capacity at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":323.15},"id":"obs-557c6e16e60c6c078be6","material_id":"stainless-therma-253-ma","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":280000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":280.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 253 MA, 50 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":373.15},"id":"obs-32dc49c7b96794f6939a","material_id":"stainless-therma-253-ma","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":230000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":230.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 253 MA, 100 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":423.15},"id":"obs-474c6d2d70956ea33d36","material_id":"stainless-therma-253-ma","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":198000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":198.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 253 MA, 150 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":473.15},"id":"obs-097d87343df0f4e6a343","material_id":"stainless-therma-253-ma","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":185000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":185.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 253 MA, 200 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":523.15},"id":"obs-d4cd3ac59b81d16d49cc","material_id":"stainless-therma-253-ma","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":176000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":176.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 253 MA, 250 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":573.15},"id":"obs-639024015fb51dfc3b00","material_id":"stainless-therma-253-ma","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":170000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":170.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 253 MA, 300 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":623.15},"id":"obs-818515493604a2100f8f","material_id":"stainless-therma-253-ma","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":165000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":165.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 253 MA, 350 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":673.15},"id":"obs-6e14616f838e1780b357","material_id":"stainless-therma-253-ma","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":160000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":160.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 253 MA, 400 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":723.15},"id":"obs-15125402fbe9e858ca24","material_id":"stainless-therma-253-ma","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":155000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":155.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 253 MA, 450 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":323.15},"id":"obs-4e50a550e26ac43a9da4","material_id":"stainless-therma-253-ma","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":630000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":630.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 253 MA, 50 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":373.15},"id":"obs-88853cce02c57bed1dfb","material_id":"stainless-therma-253-ma","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":585000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":585.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 253 MA, 100 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":423.15},"id":"obs-6e1a474b8152e580b8ea","material_id":"stainless-therma-253-ma","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":560000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":560.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 253 MA, 150 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":473.15},"id":"obs-54492618b4aa0ce59d58","material_id":"stainless-therma-253-ma","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":545000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":545.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 253 MA, 200 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":523.15},"id":"obs-dc56ab6ab65c57f7c7d9","material_id":"stainless-therma-253-ma","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":538000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":538.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 253 MA, 250 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":573.15},"id":"obs-22aa04cdacc39d2a1a1a","material_id":"stainless-therma-253-ma","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":535000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":535.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 253 MA, 300 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":623.15},"id":"obs-ed8860e2f832abc68f9b","material_id":"stainless-therma-253-ma","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":533000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":533.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 253 MA, 350 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":673.15},"id":"obs-cba5b8fd53ed0e0cb7f9","material_id":"stainless-therma-253-ma","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":530000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":530.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 253 MA, 400 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":723.15},"id":"obs-8e26cc6c161034cca7a9","material_id":"stainless-therma-253-ma","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":515000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":515.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 253 MA, 450 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-65526e436b172a263e98","material_id":"stainless-therma-310s-4845","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7800.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.8}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 310S/4845, row Table 14, Density at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-598fbde0163076b0cce7","material_id":"stainless-therma-310s-4845","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":196000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":196.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 310S/4845, row Table 14, Modulus of elasticity at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":873.15},"id":"obs-fb010367bc37ad52eae4","material_id":"stainless-therma-310s-4845","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":150000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":150.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 310S/4845, row Table 14, Modulus of elasticity at 600 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":1273.15},"id":"obs-e86812280b9e8d93d496","material_id":"stainless-therma-310s-4845","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":120000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":120.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 310S/4845, row Table 14, Modulus of elasticity at 1000 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-6f82cf83caf9c7b9bb0d","material_id":"stainless-therma-310s-4845","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 310S/4845, row Table 14, Thermal conductivity at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":773.15},"id":"obs-90e5ad8c9b6dcd81d66f","material_id":"stainless-therma-310s-4845","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":19.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":19.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 310S/4845, row Table 14, Thermal conductivity at 500 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":1073.15},"id":"obs-270cef7f094f8309ea51","material_id":"stainless-therma-310s-4845","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":24.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":24.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 310S/4845, row Table 14, Thermal conductivity at 800 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-0643e7f638b4f10ad371","material_id":"stainless-therma-310s-4845","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":472.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":472.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 310S/4845, row Table 14, Thermal capacity at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":373.15},"id":"obs-376cf31ae3a3a7532cfd","material_id":"stainless-therma-310s-4845","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":140000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":140.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 310S/4845, 100 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":423.15},"id":"obs-e7027dd603ed20da6be9","material_id":"stainless-therma-310s-4845","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":128000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":128.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 310S/4845, 150 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":473.15},"id":"obs-911cfe145e04ac8f4b31","material_id":"stainless-therma-310s-4845","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":116000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":116.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 310S/4845, 200 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":523.15},"id":"obs-e69ef63fc535611347be","material_id":"stainless-therma-310s-4845","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":108000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":108.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 310S/4845, 250 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":573.15},"id":"obs-161c0e141469cd101a88","material_id":"stainless-therma-310s-4845","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":100000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":100.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 310S/4845, 300 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":623.15},"id":"obs-06f0b7d9062f9b542646","material_id":"stainless-therma-310s-4845","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":94000000.0},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"MPa","value":94.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 310S/4845, 350 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":673.15},"id":"obs-505391d5004bcf5202a5","material_id":"stainless-therma-310s-4845","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":91000000.0},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"MPa","value":91.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 310S/4845, 400 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":723.15},"id":"obs-ca00fd5b69640e292c0a","material_id":"stainless-therma-310s-4845","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":86000000.0},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"MPa","value":86.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 310S/4845, 450 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":373.15},"id":"obs-50ad3a3a5e3894295cf6","material_id":"stainless-therma-310s-4845","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":470000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":470.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 310S/4845, 100 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":423.15},"id":"obs-371463dfbbeb72a10a0e","material_id":"stainless-therma-310s-4845","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":450000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":450.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 310S/4845, 150 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":473.15},"id":"obs-2ad975cd0b28e98290cf","material_id":"stainless-therma-310s-4845","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":430000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":430.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 310S/4845, 200 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":523.15},"id":"obs-b88987eee622002ab625","material_id":"stainless-therma-310s-4845","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":420000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":420.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 310S/4845, 250 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":573.15},"id":"obs-591093b31dea34c6796c","material_id":"stainless-therma-310s-4845","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":410000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":410.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 310S/4845, 300 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":623.15},"id":"obs-5946c6aef85a482b3d27","material_id":"stainless-therma-310s-4845","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":405000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":405.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 310S/4845, 350 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":673.15},"id":"obs-3377d7140f04a0bc31a4","material_id":"stainless-therma-310s-4845","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":400000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":400.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 310S/4845, 400 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":723.15},"id":"obs-114732faf2ea68437582","material_id":"stainless-therma-310s-4845","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":385000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":385.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 310S/4845, 450 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-4d0abcc337b85d869382","material_id":"stainless-therma-304h-4948","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7900.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.9}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 304H/4948, row Table 14, Density at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-53e52b2d1437d9a9e72a","material_id":"stainless-therma-304h-4948","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":200000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":200.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 304H/4948, row Table 14, Modulus of elasticity at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":873.15},"id":"obs-8ee395adce2a63cb707b","material_id":"stainless-therma-304h-4948","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":155000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":155.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 304H/4948, row Table 14, Modulus of elasticity at 600 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":1273.15},"id":"obs-84b0583516aa889d96ba","material_id":"stainless-therma-304h-4948","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":125000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":125.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 304H/4948, row Table 14, Modulus of elasticity at 1000 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-1e324279dd438b8c262e","material_id":"stainless-therma-304h-4948","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":17.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":17.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 304H/4948, row Table 14, Thermal conductivity at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":773.15},"id":"obs-c1b6efb2daba23494bd8","material_id":"stainless-therma-304h-4948","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":21.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":21.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 304H/4948, row Table 14, Thermal conductivity at 500 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-dad156637f437027aa0e","material_id":"stainless-therma-304h-4948","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":450.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":450.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 304H/4948, row Table 14, Thermal capacity at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":323.15},"id":"obs-b5a29e742814d000d85d","material_id":"stainless-therma-304h-4948","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":178000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":178.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 304H/4948, 50 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":373.15},"id":"obs-08a81ab24eb30c9d54dc","material_id":"stainless-therma-304h-4948","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":157000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":157.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 304H/4948, 100 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":423.15},"id":"obs-6a69918983334bea02b6","material_id":"stainless-therma-304h-4948","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":142000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":142.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 304H/4948, 150 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":473.15},"id":"obs-1f9fd584ca6d4fa3fa4e","material_id":"stainless-therma-304h-4948","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":127000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":127.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 304H/4948, 200 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":523.15},"id":"obs-4e3971bd0d781342aa85","material_id":"stainless-therma-304h-4948","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":117000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":117.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 304H/4948, 250 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":573.15},"id":"obs-150980fe4418b1acfacd","material_id":"stainless-therma-304h-4948","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":108000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":108.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 304H/4948, 300 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":623.15},"id":"obs-b30bc6601702bf219143","material_id":"stainless-therma-304h-4948","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":103000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":103.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 304H/4948, 350 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":673.15},"id":"obs-3cfbe61d287a4b12332c","material_id":"stainless-therma-304h-4948","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":98000000.0},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"MPa","value":98.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 304H/4948, 400 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":723.15},"id":"obs-49a6d454e7dc0b3e140b","material_id":"stainless-therma-304h-4948","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":93000000.0},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"MPa","value":93.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 304H/4948, 450 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":323.15},"id":"obs-c787e7be260cd8a32120","material_id":"stainless-therma-304h-4948","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":484000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":484.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 304H/4948, 50 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":373.15},"id":"obs-c0e6b05287b05e676dfb","material_id":"stainless-therma-304h-4948","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":440000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":440.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 304H/4948, 100 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":423.15},"id":"obs-dfe56d3c31f851eca176","material_id":"stainless-therma-304h-4948","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":410000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":410.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 304H/4948, 150 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":473.15},"id":"obs-9676a87040daad54e737","material_id":"stainless-therma-304h-4948","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":390000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":390.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 304H/4948, 200 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":523.15},"id":"obs-125cabf089a11565c97b","material_id":"stainless-therma-304h-4948","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":385000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":385.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 304H/4948, 250 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":573.15},"id":"obs-ab2c70e3b5d91cc9fd4f","material_id":"stainless-therma-304h-4948","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":375000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":375.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 304H/4948, 300 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":623.15},"id":"obs-aaca01f9107d6b856abd","material_id":"stainless-therma-304h-4948","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":375000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":375.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 304H/4948, 350 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":673.15},"id":"obs-31f41e54c4831b865722","material_id":"stainless-therma-304h-4948","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":375000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":375.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 304H/4948, 400 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":723.15},"id":"obs-cbeed920fb6239048de8","material_id":"stainless-therma-304h-4948","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":370000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":370.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 304H/4948, 450 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-5dd2eddcbab80c94e5ae","material_id":"stainless-therma-321h-4878","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7900.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.9}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 321H/4878, row Table 14, Density at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-a474c2f2e35270690454","material_id":"stainless-therma-321h-4878","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":196000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":196.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 321H/4878, row Table 14, Modulus of elasticity at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":873.15},"id":"obs-f1007a28338eca099da1","material_id":"stainless-therma-321h-4878","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":150000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":150.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 321H/4878, row Table 14, Modulus of elasticity at 600 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-87b0b0ef1a6bb853aade","material_id":"stainless-therma-321h-4878","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 321H/4878, row Table 14, Thermal conductivity at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":773.15},"id":"obs-7e96da16cc9bc820320d","material_id":"stainless-therma-321h-4878","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":21.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":21.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 321H/4878, row Table 14, Thermal conductivity at 500 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":1073.15},"id":"obs-077e6b0a93b6689be368","material_id":"stainless-therma-321h-4878","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":26.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":26.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 321H/4878, row Table 14, Thermal conductivity at 800 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-d9e337c8287a5850e062","material_id":"stainless-therma-321h-4878","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":472.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":472.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 321H/4878, row Table 14, Thermal capacity at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":373.15},"id":"obs-0a089bbbc08d73acfbbf","material_id":"stainless-therma-321h-4878","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":162000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":162.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 321H/4878, 100 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":423.15},"id":"obs-9bf1f531a4863b93f9a2","material_id":"stainless-therma-321h-4878","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":152000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":152.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 321H/4878, 150 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":473.15},"id":"obs-109e93e479c4125d36ae","material_id":"stainless-therma-321h-4878","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":142000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":142.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 321H/4878, 200 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":523.15},"id":"obs-225992d2482fdcb8a30a","material_id":"stainless-therma-321h-4878","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":137000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":137.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 321H/4878, 250 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":573.15},"id":"obs-61c75b39627faf9d1868","material_id":"stainless-therma-321h-4878","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":132000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":132.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 321H/4878, 300 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":623.15},"id":"obs-66aee9834fa0cd7e0c49","material_id":"stainless-therma-321h-4878","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":127000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":127.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 321H/4878, 350 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":673.15},"id":"obs-a2de8d0e68edcd5e0f35","material_id":"stainless-therma-321h-4878","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":123000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":123.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 321H/4878, 400 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":723.15},"id":"obs-7528aa27b8777c00c29a","material_id":"stainless-therma-321h-4878","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":118000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":118.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 321H/4878, 450 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":373.15},"id":"obs-b5ccb2be1f9fb62505eb","material_id":"stainless-therma-321h-4878","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":410000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":410.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 321H/4878, 100 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":423.15},"id":"obs-a94df44a202bf597d19e","material_id":"stainless-therma-321h-4878","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":390000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":390.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 321H/4878, 150 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":473.15},"id":"obs-2209b392cdd337ac17c7","material_id":"stainless-therma-321h-4878","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":370000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":370.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 321H/4878, 200 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":523.15},"id":"obs-e520305188df789885dd","material_id":"stainless-therma-321h-4878","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":360000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":360.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 321H/4878, 250 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":573.15},"id":"obs-1ce2b3f6f81c200c48cb","material_id":"stainless-therma-321h-4878","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":350000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":350.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 321H/4878, 300 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":623.15},"id":"obs-a38da59222c7ba2958aa","material_id":"stainless-therma-321h-4878","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":345000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":345.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 321H/4878, 350 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":673.15},"id":"obs-eab424013cbc3be19c64","material_id":"stainless-therma-321h-4878","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":340000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":340.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 321H/4878, 400 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":723.15},"id":"obs-475868e1db61a25aac0e","material_id":"stainless-therma-321h-4878","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":335000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":335.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 321H/4878, 450 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-e27e7e94b86a8a4def2c","material_id":"stainless-therma-347h","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7900.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.9}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 347H, row Table 14, Density at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-e24a23f65bc61f687846","material_id":"stainless-therma-347h","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":200000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":200.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 347H, row Table 14, Modulus of elasticity at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":873.15},"id":"obs-b855cf5021fcb78dde02","material_id":"stainless-therma-347h","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":155000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":155.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 347H, row Table 14, Modulus of elasticity at 600 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-3ceb92aab21b4ec7dcef","material_id":"stainless-therma-347h","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 347H, row Table 14, Thermal conductivity at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":773.15},"id":"obs-9b3879383126b1307f6e","material_id":"stainless-therma-347h","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":21.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":21.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 347H, row Table 14, Thermal conductivity at 500 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-c74231efdfe04397e105","material_id":"stainless-therma-347h","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":500.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":500.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 347H, row Table 14, Thermal capacity at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":323.15},"id":"obs-30d2232c426864c45cb9","material_id":"stainless-therma-347h","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":191000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":191.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 347H, 50 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":373.15},"id":"obs-efc73c5af88ea118367a","material_id":"stainless-therma-347h","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":177000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":177.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 347H, 100 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":423.15},"id":"obs-4ed1421de3da4181a3ec","material_id":"stainless-therma-347h","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":167000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":167.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 347H, 150 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":473.15},"id":"obs-fce725d2464de9c56cfe","material_id":"stainless-therma-347h","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":157000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":157.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 347H, 200 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":523.15},"id":"obs-a4a4aeaa50c087120160","material_id":"stainless-therma-347h","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":147000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":147.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 347H, 250 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":573.15},"id":"obs-fc5b98d2a648ecf26229","material_id":"stainless-therma-347h","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":136000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":136.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 347H, 300 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":623.15},"id":"obs-811ce2ab70f436207c4e","material_id":"stainless-therma-347h","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":130000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":130.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 347H, 350 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":673.15},"id":"obs-52084765d3450510260b","material_id":"stainless-therma-347h","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":125000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":125.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 347H, 400 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":723.15},"id":"obs-6780ecd507a82cd2a678","material_id":"stainless-therma-347h","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":121000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":121.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 347H, 450 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":323.15},"id":"obs-3b35d5748e4b7501ecd8","material_id":"stainless-therma-347h","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":476000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":476.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 347H, 50 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":373.15},"id":"obs-f53a71b4425513a309d4","material_id":"stainless-therma-347h","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":435000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":435.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 347H, 100 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":423.15},"id":"obs-3ef66e0e6500f51bad15","material_id":"stainless-therma-347h","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":400000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":400.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 347H, 150 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":473.15},"id":"obs-4ca8e5a4d5e76076d2ef","material_id":"stainless-therma-347h","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":370000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":370.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 347H, 200 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":523.15},"id":"obs-84d674d2e681dd592d9a","material_id":"stainless-therma-347h","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":350000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":350.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 347H, 250 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":573.15},"id":"obs-61febb1e096df5976ced","material_id":"stainless-therma-347h","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":340000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":340.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 347H, 300 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":623.15},"id":"obs-8c0c06a6c378b6ed1027","material_id":"stainless-therma-347h","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":335000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":335.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 347H, 350 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":673.15},"id":"obs-57ef3ef553824901e166","material_id":"stainless-therma-347h","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":330000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":330.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 347H, 400 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":723.15},"id":"obs-291b4a8781792c3935a8","material_id":"stainless-therma-347h","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":320000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":320.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 347H, 450 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-284dd2bd29ba3db57740","material_id":"stainless-therma-4828","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7800.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.8}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 4828, row Table 14, Density at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-1bdd7b705c53077d8c9b","material_id":"stainless-therma-4828","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":196000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":196.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 4828, row Table 14, Modulus of elasticity at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":873.15},"id":"obs-b7a82773d0dc7a7badd3","material_id":"stainless-therma-4828","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":150000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":150.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 4828, row Table 14, Modulus of elasticity at 600 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":1273.15},"id":"obs-e6bedc6ecf434ae8d05d","material_id":"stainless-therma-4828","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":120000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":120.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 4828, row Table 14, Modulus of elasticity at 1000 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-c2d23388f73da4067abd","material_id":"stainless-therma-4828","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 4828, row Table 14, Thermal conductivity at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":773.15},"id":"obs-b895ffca6947d2fc2d21","material_id":"stainless-therma-4828","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":21.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":21.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 4828, row Table 14, Thermal conductivity at 500 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":1073.15},"id":"obs-ebfe21734d22b09c132a","material_id":"stainless-therma-4828","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":25.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":25.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 4828, row Table 14, Thermal conductivity at 800 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-34cb41b38a8189da8b95","material_id":"stainless-therma-4828","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":472.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":472.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 4828, row Table 14, Thermal capacity at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":373.15},"id":"obs-fc01d397725bb2f302a9","material_id":"stainless-therma-4828","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":140000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":140.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 4828, 100 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":423.15},"id":"obs-9d6df63febdf74199ab5","material_id":"stainless-therma-4828","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":128000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":128.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 4828, 150 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":473.15},"id":"obs-f58e488776a4a2c8c142","material_id":"stainless-therma-4828","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":116000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":116.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 4828, 200 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":523.15},"id":"obs-488f4df4f344ac9f826f","material_id":"stainless-therma-4828","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":108000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":108.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 4828, 250 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":573.15},"id":"obs-d4953130ff9c7af294fd","material_id":"stainless-therma-4828","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":100000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":100.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 4828, 300 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":623.15},"id":"obs-0898ee08b17d3a9456e5","material_id":"stainless-therma-4828","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":94000000.0},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"MPa","value":94.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 4828, 350 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":673.15},"id":"obs-e2edaec785b1162545d8","material_id":"stainless-therma-4828","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":91000000.0},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"MPa","value":91.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 4828, 400 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":723.15},"id":"obs-7b9fb4ef797bafd80eda","material_id":"stainless-therma-4828","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":86000000.0},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"MPa","value":86.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 4828, 450 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":373.15},"id":"obs-52aaf6c64dcbc86cfe43","material_id":"stainless-therma-4828","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":470000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":470.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 4828, 100 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":423.15},"id":"obs-7ccea175f22b4d9c9c6c","material_id":"stainless-therma-4828","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":450000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":450.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 4828, 150 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":473.15},"id":"obs-ca2885aa9f20f7bd9a43","material_id":"stainless-therma-4828","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":430000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":430.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 4828, 200 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":523.15},"id":"obs-67c355e87e85f0605ccb","material_id":"stainless-therma-4828","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":420000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":420.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 4828, 250 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":573.15},"id":"obs-d9e44d55c657e5416d88","material_id":"stainless-therma-4828","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":410000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":410.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 4828, 300 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":623.15},"id":"obs-6f90c478839384e6a3cd","material_id":"stainless-therma-4828","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":405000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":405.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 4828, 350 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":673.15},"id":"obs-1006270f25c33dd50daf","material_id":"stainless-therma-4828","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":400000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":400.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 4828, 400 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":723.15},"id":"obs-69f45472cc39b935bdaf","material_id":"stainless-therma-4828","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":385000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":385.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 4828, 450 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-61b364a238477ff16921","material_id":"stainless-therma-309s-4833","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7800.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.8}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 309S/4833, row Table 14, Density at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-2c57c9af6ebecb1496f5","material_id":"stainless-therma-309s-4833","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":196000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":196.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 309S/4833, row Table 14, Modulus of elasticity at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":873.15},"id":"obs-e36c99d6a1aae4e3fe0f","material_id":"stainless-therma-309s-4833","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":150000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":150.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 309S/4833, row Table 14, Modulus of elasticity at 600 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":1273.15},"id":"obs-2880d6c68336990c5fff","material_id":"stainless-therma-309s-4833","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":120000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":120.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 309S/4833, row Table 14, Modulus of elasticity at 1000 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-2f7270a7971655a4904d","material_id":"stainless-therma-309s-4833","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 309S/4833, row Table 14, Thermal conductivity at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":773.15},"id":"obs-228b04426b4a1630910c","material_id":"stainless-therma-309s-4833","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":19.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":19.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 309S/4833, row Table 14, Thermal conductivity at 500 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":1073.15},"id":"obs-8dd626c49befcbc7d436","material_id":"stainless-therma-309s-4833","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":25.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":25.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 309S/4833, row Table 14, Thermal conductivity at 800 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-a88fac0562dfc46dccf1","material_id":"stainless-therma-309s-4833","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":472.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":472.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 309S/4833, row Table 14, Thermal capacity at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":373.15},"id":"obs-529a82e0f23520e75192","material_id":"stainless-therma-309s-4833","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":140000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":140.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 309S/4833, 100 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":423.15},"id":"obs-28ed56963a16de4833e6","material_id":"stainless-therma-309s-4833","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":128000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":128.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 309S/4833, 150 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":473.15},"id":"obs-faf3ececafaafaa79961","material_id":"stainless-therma-309s-4833","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":116000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":116.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 309S/4833, 200 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":523.15},"id":"obs-225dbc676c7b0b9818a4","material_id":"stainless-therma-309s-4833","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":108000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":108.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 309S/4833, 250 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":573.15},"id":"obs-9215e1c2f79951872661","material_id":"stainless-therma-309s-4833","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":100000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":100.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 309S/4833, 300 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":623.15},"id":"obs-3a566ea4b7932f00c6da","material_id":"stainless-therma-309s-4833","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":94000000.0},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"MPa","value":94.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 309S/4833, 350 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":673.15},"id":"obs-a92ca45e560f9359ce1d","material_id":"stainless-therma-309s-4833","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":91000000.0},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"MPa","value":91.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 309S/4833, 400 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":723.15},"id":"obs-6450edee19d9226ccd95","material_id":"stainless-therma-309s-4833","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":86000000.0},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"MPa","value":86.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 309S/4833, 450 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":373.15},"id":"obs-c6628ca75bfbbc55aa5e","material_id":"stainless-therma-309s-4833","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":470000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":470.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 309S/4833, 100 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":423.15},"id":"obs-d6321732e80896dc56c6","material_id":"stainless-therma-309s-4833","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":450000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":450.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 309S/4833, 150 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":473.15},"id":"obs-b21e016db47b252bd250","material_id":"stainless-therma-309s-4833","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":430000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":430.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 309S/4833, 200 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":523.15},"id":"obs-f65f58639e3104f0a759","material_id":"stainless-therma-309s-4833","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":420000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":420.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 309S/4833, 250 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":573.15},"id":"obs-ce0478dbb5aed2805dfd","material_id":"stainless-therma-309s-4833","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":410000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":410.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 309S/4833, 300 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":623.15},"id":"obs-f504a5bcb130c5e82708","material_id":"stainless-therma-309s-4833","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":405000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":405.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 309S/4833, 350 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":673.15},"id":"obs-addae2135e115c80ed60","material_id":"stainless-therma-309s-4833","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":400000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":400.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 309S/4833, 400 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":723.15},"id":"obs-7ac5bc56b9de6d042c93","material_id":"stainless-therma-309s-4833","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":385000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":385.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 309S/4833, 450 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-62184eb2707eb9f70e5e","material_id":"stainless-therma-314-4841","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7800.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.8}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 314/4841, row Table 14, Density at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-9dab9bd29bf783c6d209","material_id":"stainless-therma-314-4841","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":196000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":196.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 314/4841, row Table 14, Modulus of elasticity at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":873.15},"id":"obs-88c14500c629db356d85","material_id":"stainless-therma-314-4841","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":150000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":150.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 314/4841, row Table 14, Modulus of elasticity at 600 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":1273.15},"id":"obs-09d6605f3ad98bf05a21","material_id":"stainless-therma-314-4841","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":120000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":120.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 314/4841, row Table 14, Modulus of elasticity at 1000 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-46c01bb2781c493beb1c","material_id":"stainless-therma-314-4841","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":15.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":15.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 314/4841, row Table 14, Thermal conductivity at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":773.15},"id":"obs-f8c88d1bfe3fd87c5f42","material_id":"stainless-therma-314-4841","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":19.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":19.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 314/4841, row Table 14, Thermal conductivity at 500 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":1073.15},"id":"obs-735ad6b3ec17002e21f2","material_id":"stainless-therma-314-4841","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":25.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":25.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 314/4841, row Table 14, Thermal conductivity at 800 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-bb5cda1cbac93c88d819","material_id":"stainless-therma-314-4841","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":472.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":472.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 314/4841, row Table 14, Thermal capacity at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":373.15},"id":"obs-e526dadef15edcc9dd87","material_id":"stainless-therma-314-4841","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":140000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":140.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 314/4841, 100 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":423.15},"id":"obs-fc49d3ae49a3e5d0a9f8","material_id":"stainless-therma-314-4841","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":128000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":128.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 314/4841, 150 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":473.15},"id":"obs-4b24be4201285b330af6","material_id":"stainless-therma-314-4841","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":116000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":116.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 314/4841, 200 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":523.15},"id":"obs-2b93fd7dd86407d54b30","material_id":"stainless-therma-314-4841","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":108000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":108.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 314/4841, 250 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":573.15},"id":"obs-0bf90a427ac18ee056df","material_id":"stainless-therma-314-4841","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":100000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":100.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 314/4841, 300 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":623.15},"id":"obs-359184ab55d3e448343e","material_id":"stainless-therma-314-4841","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":94000000.0},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"MPa","value":94.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 314/4841, 350 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":673.15},"id":"obs-a7e6f59134a3bab4ca74","material_id":"stainless-therma-314-4841","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":91000000.0},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"MPa","value":91.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 314/4841, 400 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":723.15},"id":"obs-5f455cb2ad99c3692883","material_id":"stainless-therma-314-4841","notes":"","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":86000000.0},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"MPa","value":86.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 314/4841, 450 °C, row Table 5, Rp0.2","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":373.15},"id":"obs-855a3f5d4ddf7966b575","material_id":"stainless-therma-314-4841","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":470000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":470.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 314/4841, 100 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":423.15},"id":"obs-b108c8ac5095448cfc7f","material_id":"stainless-therma-314-4841","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":450000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":450.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 314/4841, 150 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":473.15},"id":"obs-d4bc26f5603c5d6902c1","material_id":"stainless-therma-314-4841","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":430000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":430.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 314/4841, 200 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":523.15},"id":"obs-6110d016332a07b16dd1","material_id":"stainless-therma-314-4841","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":420000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":420.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 314/4841, 250 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":573.15},"id":"obs-149f42a8858c5b2fc1fb","material_id":"stainless-therma-314-4841","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":410000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":410.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 314/4841, 300 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":623.15},"id":"obs-9ef95b988fad96083bd8","material_id":"stainless-therma-314-4841","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":405000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":405.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 314/4841, 350 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":673.15},"id":"obs-7e83a09c30e6874f9f4e","material_id":"stainless-therma-314-4841","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":400000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":400.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 314/4841, 400 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":723.15},"id":"obs-dc273b9ca46f9ecae565","material_id":"stainless-therma-314-4841","notes":"","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":385000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":385.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 8, Therma 314/4841, 450 °C, row Table 7, Rm","page":8},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values based on EN 10028-7 (footnote 1)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-9c87e0867428a32fc0ae","material_id":"stainless-therma-4713","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7700.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.7}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 4713, row Table 14, Density at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-be572805453708044fe4","material_id":"stainless-therma-4713","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":220000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":220.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 4713, row Table 14, Modulus of elasticity at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-bd4739a2829cd06c1be4","material_id":"stainless-therma-4713","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":23.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":23.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 4713, row Table 14, Thermal conductivity at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":773.15},"id":"obs-41025acc8bfcb496c7d4","material_id":"stainless-therma-4713","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":25.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":25.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 4713, row Table 14, Thermal conductivity at 500 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-0d5760c62eebb150f4db","material_id":"stainless-therma-4713","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":450.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":450.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 4713, row Table 14, Thermal capacity at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-e1a25274018bf6390668","material_id":"stainless-therma-4724","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7700.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":7.7}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 4724, row Table 14, Density at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-e41399b1ce41825e9a57","material_id":"stainless-therma-4724","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":220000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":220.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 4724, row Table 14, Modulus of elasticity at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-c59593178c7f5ebf455c","material_id":"stainless-therma-4724","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":21.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":21.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 4724, row Table 14, Thermal conductivity at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":773.15},"id":"obs-0a05b6e7c8c86e804a0c","material_id":"stainless-therma-4724","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":23.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":23.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 4724, row Table 14, Thermal conductivity at 500 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-a4b3914aab1e13fec266","material_id":"stainless-therma-4724","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":500.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":500.0}},"source_id":"outokumpu-therma","source_locator":{"label":"Page 11, Therma 4724, row Table 14, Thermal capacity at 20 °C","page":11},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu values and European standards (Table 14)"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-c9af8ac20cc47763bfaa","material_id":"stainless-ultra-904l","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8000.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":8.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 14, Ultra 904L, row Table 13, Density","page":14},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1 (Table 13)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-a31bd8d7ee44a256260b","material_id":"stainless-ultra-904l","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":195000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":195.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 14, Ultra 904L, row Table 13, Modulus of elasticity at 20 °C","page":14},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1 (Table 13)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-fb1df3b5a9781d6a8d94","material_id":"stainless-ultra-904l","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":12.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":12.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 14, Ultra 904L, row Table 13, Thermal conductivity at 20 °C","page":14},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1 (Table 13)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-014ea28ad58a12e23428","material_id":"stainless-ultra-904l","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":450.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":450.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 14, Ultra 904L, row Table 13, Thermal capacity at 20 °C","page":14},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1 (Table 13)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":293.15},"id":"obs-c884779f923b0a2aeecd","material_id":"stainless-ultra-904l","notes":"Cold rolled; product form not further specified in Table 10.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":240000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":240.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 12, Ultra 904L, Cold rolled, row Table 10, Rp0.2","page":12},"state_id":"stainless-ultra-904l-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"specified_range","conditions":{"temperature_K":293.15},"id":"obs-172dc0aaebae35036735","material_id":"stainless-ultra-904l","notes":"Cold rolled; product form not further specified in Table 10.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":730000000.0,"minimum":530000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":730.0,"minimum":530.0,"significant_figures":3,"unit":"MPa"}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 12, Ultra 904L, Cold rolled, row Table 10, Rm","page":12},"state_id":"stainless-ultra-904l-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":293.15},"id":"obs-160441f407af8a059992","material_id":"stainless-ultra-904l","notes":"Cold rolled; product form not further specified in Table 10. Footnote 2: thickness < 3 mm uses A80 (80 mm); thickness ≥ 3 mm uses A (5.65√S0).","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.35000000000000003},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":35.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 12, Ultra 904L, Cold rolled, row Table 10, A","page":12},"state_id":"stainless-ultra-904l-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-fcf56bcd7659aadffa37","material_id":"stainless-ultra-254-smo","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8000.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":8.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 14, Ultra 254 SMO, row Table 13, Density","page":14},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1 (Table 13)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-50445d15ba9cf5dac856","material_id":"stainless-ultra-254-smo","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":195000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":195.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 14, Ultra 254 SMO, row Table 13, Modulus of elasticity at 20 °C","page":14},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1 (Table 13)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-8e6e0c36469a525d8179","material_id":"stainless-ultra-254-smo","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":14.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":14.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 14, Ultra 254 SMO, row Table 13, Thermal conductivity at 20 °C","page":14},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1 (Table 13)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-fc57641bcc18a68f8ab5","material_id":"stainless-ultra-254-smo","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":500.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":500.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 14, Ultra 254 SMO, row Table 13, Thermal capacity at 20 °C","page":14},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1 (Table 13)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":293.15},"id":"obs-b75812179cafd5b5b87b","material_id":"stainless-ultra-254-smo","notes":"Cold rolled; product form not further specified in Table 10.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":320000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":320.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 12, Ultra 254 SMO, Cold rolled, row Table 10, Rp0.2","page":12},"state_id":"stainless-ultra-254-smo-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"specified_range","conditions":{"temperature_K":293.15},"id":"obs-be081ef898bb0190428e","material_id":"stainless-ultra-254-smo","notes":"Cold rolled; product form not further specified in Table 10.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":850000000.0,"minimum":650000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":850.0,"minimum":650.0,"significant_figures":3,"unit":"MPa"}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 12, Ultra 254 SMO, Cold rolled, row Table 10, Rm","page":12},"state_id":"stainless-ultra-254-smo-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":293.15},"id":"obs-3e31f68fbe65062ea499","material_id":"stainless-ultra-254-smo","notes":"Cold rolled; product form not further specified in Table 10. Footnote 2: thickness < 3 mm uses A80 (80 mm); thickness ≥ 3 mm uses A (5.65√S0).","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.35000000000000003},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":35.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 12, Ultra 254 SMO, Cold rolled, row Table 10, A","page":12},"state_id":"stainless-ultra-254-smo-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-66f14660a922c0fa4a41","material_id":"nickel-ultra-alloy-825","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8100.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":8.1}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 14, Ultra Alloy 825, row Table 13, Density","page":14},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1 (Table 13)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-63f778590aa898cfd1aa","material_id":"nickel-ultra-alloy-825","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":195000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":195.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 14, Ultra Alloy 825, row Table 13, Modulus of elasticity at 20 °C","page":14},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1 (Table 13)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-d78fa87a9ad97e32e0a0","material_id":"nickel-ultra-alloy-825","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":10.5},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":10.5}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 14, Ultra Alloy 825, row Table 13, Thermal conductivity at 20 °C","page":14},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1 (Table 13)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-13fe7ec6c77e8c9735c0","material_id":"nickel-ultra-alloy-825","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":440.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":440.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 14, Ultra Alloy 825, row Table 13, Thermal capacity at 20 °C","page":14},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1 (Table 13)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":293.15},"id":"obs-6120e4089b15b89f358e","material_id":"nickel-ultra-alloy-825","notes":"Cold rolled; product form not further specified in Table 10.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":240000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":240.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 12, Ultra Alloy 825, Cold rolled, row Table 10, Rp0.2","page":12},"state_id":"nickel-ultra-alloy-825-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 6208 (Table 10 footnote 3)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":293.15},"id":"obs-8b453a52e1e6c63b061d","material_id":"nickel-ultra-alloy-825","notes":"Cold rolled; product form not further specified in Table 10.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":590000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":590.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 12, Ultra Alloy 825, Cold rolled, row Table 10, Rm","page":12},"state_id":"nickel-ultra-alloy-825-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 6208 (Table 10 footnote 3)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":293.15},"id":"obs-41c62758753b739581b6","material_id":"nickel-ultra-alloy-825","notes":"Cold rolled; product form not further specified in Table 10.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.3},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":30.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 12, Ultra Alloy 825, Cold rolled, row Table 10, A","page":12},"state_id":"nickel-ultra-alloy-825-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"ISO 6208 (Table 10 footnote 3)"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-0eb42542e6afc4e3f7e6","material_id":"stainless-ultra-317l","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8000.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":8.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 14, Ultra 317L, row Table 13, Density","page":14},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1 (Table 13)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-7dc1917cd73dbfd05184","material_id":"stainless-ultra-317l","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":200000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":200.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 14, Ultra 317L, row Table 13, Modulus of elasticity at 20 °C","page":14},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1 (Table 13)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-7297db04a6a34b866916","material_id":"stainless-ultra-317l","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":14.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":14.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 14, Ultra 317L, row Table 13, Thermal conductivity at 20 °C","page":14},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1 (Table 13)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-c49f499dc2845a78e300","material_id":"stainless-ultra-317l","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":500.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":500.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 14, Ultra 317L, row Table 13, Thermal capacity at 20 °C","page":14},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1 (Table 13)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":293.15},"id":"obs-266c19a107faf55b774a","material_id":"stainless-ultra-317l","notes":"Cold rolled; product form not further specified in Table 10.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":240000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":240.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 12, Ultra 317L, Cold rolled, row Table 10, Rp0.2","page":12},"state_id":"stainless-ultra-317l-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":293.15},"id":"obs-4f7195292872446f99b4","material_id":"stainless-ultra-317l","notes":"Cold rolled; product form not further specified in Table 10. Footnote 2: thickness < 3 mm uses A80 (80 mm); thickness ≥ 3 mm uses A (5.65√S0).","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.35000000000000003},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":35.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 12, Ultra 317L, Cold rolled, row Table 10, A","page":12},"state_id":"stainless-ultra-317l-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-2cf71fd430ce470554c7","material_id":"stainless-ultra-725ln","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8000.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":8.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 14, Ultra 725LN, row Table 13, Density","page":14},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1 (Table 13)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-debdf403af18af57e7d2","material_id":"stainless-ultra-725ln","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":195000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":195.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 14, Ultra 725LN, row Table 13, Modulus of elasticity at 20 °C","page":14},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1 (Table 13)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-076423deb745fc07d0a1","material_id":"stainless-ultra-725ln","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":14.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":14.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 14, Ultra 725LN, row Table 13, Thermal conductivity at 20 °C","page":14},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1 (Table 13)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-6f42203b49abeb704aed","material_id":"stainless-ultra-725ln","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":500.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":500.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 14, Ultra 725LN, row Table 13, Thermal capacity at 20 °C","page":14},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1 (Table 13)"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-7b780aa253e438aca9e7","material_id":"stainless-ultra-6xn","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8100.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":8.1}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 14, Ultra 6XN, row Table 13, Density","page":14},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1 (Table 13)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-4ecf496bad41078c1d83","material_id":"stainless-ultra-6xn","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":195000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":195.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 14, Ultra 6XN, row Table 13, Modulus of elasticity at 20 °C","page":14},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1 (Table 13)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-d9f489de56ae3ddb73e4","material_id":"stainless-ultra-6xn","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":12.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":12.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 14, Ultra 6XN, row Table 13, Thermal conductivity at 20 °C","page":14},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1 (Table 13)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-e1cdf6dfc90f5f7ce57a","material_id":"stainless-ultra-6xn","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":450.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":450.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 14, Ultra 6XN, row Table 13, Thermal capacity at 20 °C","page":14},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1 (Table 13)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":293.15},"id":"obs-f0d5d0be5e7e1fb5ff4b","material_id":"stainless-ultra-6xn","notes":"Cold rolled; product form not further specified in Table 10.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":300000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":300.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 12, Ultra 6XN, Cold rolled 4), row Table 10, Rp0.2","page":12},"state_id":"stainless-ultra-6xn-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu Table 10 (footnote 4: planned EN 10088-2 revision 2022/23)"},"uncertainty":null},{"basis":"specified_range","conditions":{"temperature_K":293.15},"id":"obs-17b788eda7af62cd3f85","material_id":"stainless-ultra-6xn","notes":"Cold rolled; product form not further specified in Table 10.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":850000000.0,"minimum":650000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":850.0,"minimum":650.0,"significant_figures":3,"unit":"MPa"}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 12, Ultra 6XN, Cold rolled 4), row Table 10, Rm","page":12},"state_id":"stainless-ultra-6xn-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu Table 10 (footnote 4: planned EN 10088-2 revision 2022/23)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":293.15},"id":"obs-febe28d4ab6320ea7ce8","material_id":"stainless-ultra-6xn","notes":"Cold rolled; product form not further specified in Table 10. Footnote 2: thickness < 3 mm uses A80 (80 mm); thickness ≥ 3 mm uses A (5.65√S0).","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.35000000000000003},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":35.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 12, Ultra 6XN, Cold rolled 4), row Table 10, A","page":12},"state_id":"stainless-ultra-6xn-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu Table 10 (footnote 4: planned EN 10088-2 revision 2022/23)"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-fe83a45630b6e2441cd2","material_id":"stainless-ultra-654-smo","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8000.0},"kind":"point","reported":{"significant_figures":2,"unit":"kg/dm³","value":8.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 14, Ultra 654 SMO, row Table 13, Density","page":14},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1 (Table 13)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-c17aade8600b54417c6a","material_id":"stainless-ultra-654-smo","notes":"","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":190000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":190.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 14, Ultra 654 SMO, row Table 13, Modulus of elasticity at 20 °C","page":14},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1 (Table 13)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-337533a263018329d3f8","material_id":"stainless-ultra-654-smo","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":11.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":11.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 14, Ultra 654 SMO, row Table 13, Thermal conductivity at 20 °C","page":14},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Outokumpu value (Table 13 footnote 2)"},"uncertainty":null},{"basis":"typical","conditions":{"temperature_K":293.15},"id":"obs-79a6911093d49b40a642","material_id":"stainless-ultra-654-smo","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":500.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":500.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 14, Ultra 654 SMO, row Table 13, Thermal capacity at 20 °C","page":14},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-1 (Table 13)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":293.15},"id":"obs-9d053ee8b4f355d2d971","material_id":"stainless-ultra-654-smo","notes":"Cold rolled; product form not further specified in Table 10.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":430000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":430.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 12, Ultra 654 SMO, Cold rolled, row Table 10, Rp0.2","page":12},"state_id":"stainless-ultra-654-smo-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"specified_range","conditions":{"temperature_K":293.15},"id":"obs-3418c337105e88f1805f","material_id":"stainless-ultra-654-smo","notes":"Cold rolled; product form not further specified in Table 10.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":1000000000.0,"minimum":750000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":1000.0,"minimum":750.0,"significant_figures":3,"unit":"MPa"}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 12, Ultra 654 SMO, Cold rolled, row Table 10, Rm","page":12},"state_id":"stainless-ultra-654-smo-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":293.15},"id":"obs-51a5046127a93cdf069c","material_id":"stainless-ultra-654-smo","notes":"Cold rolled; product form not further specified in Table 10. Footnote 2: thickness < 3 mm uses A80 (80 mm); thickness ≥ 3 mm uses A (5.65√S0).","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.4},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":40.0}},"source_id":"outokumpu-ultra","source_locator":{"label":"Page 12, Ultra 654 SMO, Cold rolled, row Table 10, A","page":12},"state_id":"stainless-ultra-654-smo-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"EN 10088-2"},"uncertainty":null},{"basis":"reference","conditions":{},"id":"obs-1607b8ea1e29a22b6c3e","material_id":"al-1060","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":2698.7907092448045},"kind":"point","reported":{"significant_figures":3,"unit":"lb/in³","value":0.0975}},"source_id":"hydro-1xxx","source_locator":{"label":"Page 1, Alloy 1060, row Density above chemical composition","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro alloy reference"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"extrusion"},"id":"obs-2b6bde38fb021388366c","material_id":"al-1060","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":95000000.0,"minimum":60000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":95.0,"minimum":60.0,"significant_figures":2,"unit":"MPa"}},"source_id":"hydro-1xxx","source_locator":{"label":"Page 2, 1060-O, thickness all thicknesses, row Ultimate tensile strength","page":2},"state_id":"al-1060-o","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion"},"id":"obs-e8cd5cfe6ee598f29f07","material_id":"al-1060","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":15000000.0},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"MPa","value":15.0}},"source_id":"hydro-1xxx","source_locator":{"label":"Page 2, 1060-O, thickness all thicknesses, row Yield strength, 0.2% offset","page":2},"state_id":"al-1060-o","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":null,"minimum":0.0015748}},"id":"obs-c7fd2732284871147954","material_id":"al-1060","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits. Elongation testing is not required when a standard specimen cannot be taken or thickness is below .062 in.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.25},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"%","value":25.0}},"source_id":"hydro-1xxx","source_locator":{"label":"Page 2, 1060-O, thickness all thicknesses, row Elongation, gauge length 2 in or 4 specimen diameters","page":2},"state_id":"al-1060-o","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15},"id":"obs-088dcec7ce179d0884c3","material_id":"al-1060","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":234.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":234.0}},"source_id":"hydro-1xxx","source_locator":{"label":"Page 2, 1060-O, thickness all thicknesses, row Typical thermal conductivity at 25 °C","page":2},"state_id":"al-1060-o","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion"},"id":"obs-6cf1364d7aec38926d2b","material_id":"al-1060","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":60000000.0},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"MPa","value":60.0}},"source_id":"hydro-1xxx","source_locator":{"label":"Page 2, 1060-H112, thickness all thicknesses, row Ultimate tensile strength","page":2},"state_id":"al-1060-h112","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion"},"id":"obs-636f9dc92e60ee5bdf5e","material_id":"al-1060","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":15000000.0},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"MPa","value":15.0}},"source_id":"hydro-1xxx","source_locator":{"label":"Page 2, 1060-H112, thickness all thicknesses, row Yield strength, 0.2% offset","page":2},"state_id":"al-1060-h112","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":null,"minimum":0.0015748}},"id":"obs-5c2cd1df4dfeeb0f5f59","material_id":"al-1060","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits. Elongation testing is not required when a standard specimen cannot be taken or thickness is below .062 in.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.25},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"%","value":25.0}},"source_id":"hydro-1xxx","source_locator":{"label":"Page 2, 1060-H112, thickness all thicknesses, row Elongation, gauge length 2 in or 4 specimen diameters","page":2},"state_id":"al-1060-h112","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"reference","conditions":{},"id":"obs-8caabd6938545e11b11b","material_id":"al-1100","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":2712.630661599906},"kind":"point","reported":{"significant_figures":2,"unit":"lb/in³","value":0.098}},"source_id":"hydro-1xxx","source_locator":{"label":"Page 1, Alloy 1100, row Density above chemical composition","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro alloy reference"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"extrusion"},"id":"obs-928cba197ffabc06f753","material_id":"al-1100","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":105000000.0,"minimum":75000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":105.0,"minimum":75.0,"significant_figures":2,"unit":"MPa"}},"source_id":"hydro-1xxx","source_locator":{"label":"Page 2, 1100-O, thickness all thicknesses, row Ultimate tensile strength","page":2},"state_id":"al-1100-o","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion"},"id":"obs-7eee9258893b767ee027","material_id":"al-1100","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":20000000.0},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"MPa","value":20.0}},"source_id":"hydro-1xxx","source_locator":{"label":"Page 2, 1100-O, thickness all thicknesses, row Yield strength, 0.2% offset","page":2},"state_id":"al-1100-o","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":null,"minimum":0.0015748}},"id":"obs-79c8e4936f6b57c5c408","material_id":"al-1100","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits. Elongation testing is not required when a standard specimen cannot be taken or thickness is below .062 in.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.25},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"%","value":25.0}},"source_id":"hydro-1xxx","source_locator":{"label":"Page 2, 1100-O, thickness all thicknesses, row Elongation, gauge length 2 in or 4 specimen diameters","page":2},"state_id":"al-1100-o","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15},"id":"obs-c1299487f7e783b758ed","material_id":"al-1100","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":222.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":222.0}},"source_id":"hydro-1xxx","source_locator":{"label":"Page 2, 1100-O, thickness all thicknesses, row Typical thermal conductivity at 25 °C","page":2},"state_id":"al-1100-o","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion"},"id":"obs-00df2a22e7ab012fd157","material_id":"al-1100","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":75000000.0},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"MPa","value":75.0}},"source_id":"hydro-1xxx","source_locator":{"label":"Page 2, 1100-H112, thickness all thicknesses, row Ultimate tensile strength","page":2},"state_id":"al-1100-h112","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion"},"id":"obs-b30bea02dacfcae54be4","material_id":"al-1100","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":20000000.0},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"MPa","value":20.0}},"source_id":"hydro-1xxx","source_locator":{"label":"Page 2, 1100-H112, thickness all thicknesses, row Yield strength, 0.2% offset","page":2},"state_id":"al-1100-h112","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":null,"minimum":0.0015748}},"id":"obs-bd5a9fed0d157d12edf2","material_id":"al-1100","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits. Elongation testing is not required when a standard specimen cannot be taken or thickness is below .062 in.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.25},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"%","value":25.0}},"source_id":"hydro-1xxx","source_locator":{"label":"Page 2, 1100-H112, thickness all thicknesses, row Elongation, gauge length 2 in or 4 specimen diameters","page":2},"state_id":"al-1100-h112","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"reference","conditions":{},"id":"obs-6fd8c72b6132438d4d24","material_id":"al-1350","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":2698.7907092448045},"kind":"point","reported":{"significant_figures":3,"unit":"lb/in³","value":0.0975}},"source_id":"hydro-1xxx","source_locator":{"label":"Page 1, Alloy 1350, row Density above chemical composition","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro alloy reference"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion"},"id":"obs-c66ec2bbb3fff9b42fc8","material_id":"al-1350","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":60000000.0},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"MPa","value":60.0}},"source_id":"hydro-1xxx","source_locator":{"label":"Page 2, 1350-H111, thickness all thicknesses, row Ultimate tensile strength","page":2},"state_id":"al-1350-h111","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion"},"id":"obs-10e2a53917477b88d737","material_id":"al-1350","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":25000000.0},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"MPa","value":25.0}},"source_id":"hydro-1xxx","source_locator":{"label":"Page 2, 1350-H111, thickness all thicknesses, row Yield strength, 0.2% offset","page":2},"state_id":"al-1350-h111","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15},"id":"obs-91af8de77c4871dc1f47","material_id":"al-1350","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":234.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":234.0}},"source_id":"hydro-1xxx","source_locator":{"label":"Page 2, 1350-H111, thickness all thicknesses, row Typical thermal conductivity at 25 °C","page":2},"state_id":"al-1350-h111","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"reference","conditions":{},"id":"obs-26438d0158b7885e0bf2","material_id":"al-6005","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":2684.950756889703},"kind":"point","reported":{"significant_figures":2,"unit":"lb/in³","value":0.097}},"source_id":"hydro-6005-6105","source_locator":{"label":"Page 1, Alloy 6005, row Density above chemical composition","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro alloy reference"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0127,"minimum":null}},"id":"obs-a56b93e03ea88c491041","material_id":"al-6005","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":170000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":170.0}},"source_id":"hydro-6005-6105","source_locator":{"label":"Page 2, 6005-T1, thickness unbounded to .500 in, row Ultimate tensile strength","page":2},"state_id":"al-6005-t1","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0127,"minimum":null}},"id":"obs-654ba4220204c865be84","material_id":"al-6005","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":105000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":105.0}},"source_id":"hydro-6005-6105","source_locator":{"label":"Page 2, 6005-T1, thickness unbounded to .500 in, row Yield strength, 0.2% offset","page":2},"state_id":"al-6005-t1","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0127,"minimum":0.0015748}},"id":"obs-7de19268c0fe5fd1da7d","material_id":"al-6005","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits. Elongation testing is not required when a standard specimen cannot be taken or thickness is below .062 in.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.16},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":16.0}},"source_id":"hydro-6005-6105","source_locator":{"label":"Page 2, 6005-T1, thickness unbounded to .500 in, row Elongation, gauge length 2 in or 4 specimen diameters","page":2},"state_id":"al-6005-t1","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15,"thickness_m":{"maximum":0.0127,"minimum":null}},"id":"obs-62eac411dc72ea547389","material_id":"al-6005","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":180.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":180.0}},"source_id":"hydro-6005-6105","source_locator":{"label":"Page 2, 6005-T1, thickness unbounded to .500 in, row Typical thermal conductivity at 25 °C","page":2},"state_id":"al-6005-t1","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0031496,"minimum":null}},"id":"obs-e95e692fd4d32944477b","material_id":"al-6005","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":260000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":260.0}},"source_id":"hydro-6005-6105","source_locator":{"label":"Page 2, 6005-T5, thickness unbounded to 0.124 in, row Ultimate tensile strength","page":2},"state_id":"al-6005-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0031496,"minimum":null}},"id":"obs-09c790cbffd09777092b","material_id":"al-6005","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":240000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":240.0}},"source_id":"hydro-6005-6105","source_locator":{"label":"Page 2, 6005-T5, thickness unbounded to 0.124 in, row Yield strength, 0.2% offset","page":2},"state_id":"al-6005-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0031496,"minimum":0.0015748}},"id":"obs-5a94f541a6e96618777c","material_id":"al-6005","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits. Elongation testing is not required when a standard specimen cannot be taken or thickness is below .062 in.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.08},"kind":"lower_bound","reported":{"significant_figures":1,"unit":"%","value":8.0}},"source_id":"hydro-6005-6105","source_locator":{"label":"Page 2, 6005-T5, thickness unbounded to 0.124 in, row Elongation, gauge length 2 in or 4 specimen diameters","page":2},"state_id":"al-6005-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15,"thickness_m":{"maximum":0.0031496,"minimum":null}},"id":"obs-daadf6900a85d4a8c3a5","material_id":"al-6005","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":188.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":188.0}},"source_id":"hydro-6005-6105","source_locator":{"label":"Page 2, 6005-T5, thickness unbounded to 0.124 in, row Typical thermal conductivity at 25 °C","page":2},"state_id":"al-6005-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0254,"minimum":0.003175}},"id":"obs-46ffa9ea560283736cf8","material_id":"al-6005","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":260000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":260.0}},"source_id":"hydro-6005-6105","source_locator":{"label":"Page 2, 6005-T5, thickness 0.125 to 1.000 in, row Ultimate tensile strength","page":2},"state_id":"al-6005-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0254,"minimum":0.003175}},"id":"obs-f862e383968f26e480cc","material_id":"al-6005","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":240000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":240.0}},"source_id":"hydro-6005-6105","source_locator":{"label":"Page 2, 6005-T5, thickness 0.125 to 1.000 in, row Yield strength, 0.2% offset","page":2},"state_id":"al-6005-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0254,"minimum":0.003175}},"id":"obs-bca87a1689ffd3337666","material_id":"al-6005","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits. Elongation testing is not required when a standard specimen cannot be taken or thickness is below .062 in.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.1},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":10.0}},"source_id":"hydro-6005-6105","source_locator":{"label":"Page 2, 6005-T5, thickness 0.125 to 1.000 in, row Elongation, gauge length 2 in or 4 specimen diameters","page":2},"state_id":"al-6005-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15,"thickness_m":{"maximum":0.0254,"minimum":0.003175}},"id":"obs-2e6f24c4a703db4dfd20","material_id":"al-6005","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":188.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":188.0}},"source_id":"hydro-6005-6105","source_locator":{"label":"Page 2, 6005-T5, thickness 0.125 to 1.000 in, row Typical thermal conductivity at 25 °C","page":2},"state_id":"al-6005-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"reference","conditions":{},"id":"obs-0da93f0f621f200bed49","material_id":"al-6105","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":2684.950756889703},"kind":"point","reported":{"significant_figures":2,"unit":"lb/in³","value":0.097}},"source_id":"hydro-6005-6105","source_locator":{"label":"Page 1, Alloy 6105, row Density above chemical composition","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro alloy reference"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0127,"minimum":null}},"id":"obs-c69265d61e9f66afc673","material_id":"al-6105","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":170000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":170.0}},"source_id":"hydro-6005-6105","source_locator":{"label":"Page 2, 6105-T1, thickness unbounded to .500 in, row Ultimate tensile strength","page":2},"state_id":"al-6105-t1","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0127,"minimum":null}},"id":"obs-120eb07fd550e20e966c","material_id":"al-6105","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":105000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":105.0}},"source_id":"hydro-6005-6105","source_locator":{"label":"Page 2, 6105-T1, thickness unbounded to .500 in, row Yield strength, 0.2% offset","page":2},"state_id":"al-6105-t1","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0127,"minimum":0.0015748}},"id":"obs-b4012d929e93ae615e15","material_id":"al-6105","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits. Elongation testing is not required when a standard specimen cannot be taken or thickness is below .062 in.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.16},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":16.0}},"source_id":"hydro-6005-6105","source_locator":{"label":"Page 2, 6105-T1, thickness unbounded to .500 in, row Elongation, gauge length 2 in or 4 specimen diameters","page":2},"state_id":"al-6105-t1","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15,"thickness_m":{"maximum":0.0127,"minimum":null}},"id":"obs-d25994b87b48497bb450","material_id":"al-6105","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":176.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":176.0}},"source_id":"hydro-6005-6105","source_locator":{"label":"Page 2, 6105-T1, thickness unbounded to .500 in, row Typical thermal conductivity at 25 °C","page":2},"state_id":"al-6105-t1","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0031496,"minimum":null}},"id":"obs-28fe4ff9a6bc8fdf0f04","material_id":"al-6105","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":260000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":260.0}},"source_id":"hydro-6005-6105","source_locator":{"label":"Page 2, 6105-T5, thickness unbounded to 0.124 in, row Ultimate tensile strength","page":2},"state_id":"al-6105-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0031496,"minimum":null}},"id":"obs-899cd174d22ea4fd9fd7","material_id":"al-6105","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":240000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":240.0}},"source_id":"hydro-6005-6105","source_locator":{"label":"Page 2, 6105-T5, thickness unbounded to 0.124 in, row Yield strength, 0.2% offset","page":2},"state_id":"al-6105-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0031496,"minimum":0.0015748}},"id":"obs-f432586973d1e8162a3b","material_id":"al-6105","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits. Elongation testing is not required when a standard specimen cannot be taken or thickness is below .062 in.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.08},"kind":"lower_bound","reported":{"significant_figures":1,"unit":"%","value":8.0}},"source_id":"hydro-6005-6105","source_locator":{"label":"Page 2, 6105-T5, thickness unbounded to 0.124 in, row Elongation, gauge length 2 in or 4 specimen diameters","page":2},"state_id":"al-6105-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15,"thickness_m":{"maximum":0.0031496,"minimum":null}},"id":"obs-c62d04928d06bfde93ba","material_id":"al-6105","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":193.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":193.0}},"source_id":"hydro-6005-6105","source_locator":{"label":"Page 2, 6105-T5, thickness unbounded to 0.124 in, row Typical thermal conductivity at 25 °C","page":2},"state_id":"al-6105-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0254,"minimum":0.003175}},"id":"obs-dcc80237d775fa9f5d41","material_id":"al-6105","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":260000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":260.0}},"source_id":"hydro-6005-6105","source_locator":{"label":"Page 2, 6105-T5, thickness 0.125 to 1.000 in, row Ultimate tensile strength","page":2},"state_id":"al-6105-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0254,"minimum":0.003175}},"id":"obs-9d7a6626a68abe0d3448","material_id":"al-6105","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":240000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":240.0}},"source_id":"hydro-6005-6105","source_locator":{"label":"Page 2, 6105-T5, thickness 0.125 to 1.000 in, row Yield strength, 0.2% offset","page":2},"state_id":"al-6105-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0254,"minimum":0.003175}},"id":"obs-0040d6fcf8e3bde7fbb4","material_id":"al-6105","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits. Elongation testing is not required when a standard specimen cannot be taken or thickness is below .062 in.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.1},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":10.0}},"source_id":"hydro-6005-6105","source_locator":{"label":"Page 2, 6105-T5, thickness 0.125 to 1.000 in, row Elongation, gauge length 2 in or 4 specimen diameters","page":2},"state_id":"al-6105-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15,"thickness_m":{"maximum":0.0254,"minimum":0.003175}},"id":"obs-6b2392381cd26f1834a2","material_id":"al-6105","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":193.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":193.0}},"source_id":"hydro-6005-6105","source_locator":{"label":"Page 2, 6105-T5, thickness 0.125 to 1.000 in, row Typical thermal conductivity at 25 °C","page":2},"state_id":"al-6105-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0127,"minimum":null}},"id":"obs-3efb766ae8662dcd43dd","material_id":"al-6105","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":260000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":260.0}},"source_id":"hydro-6005-6105","source_locator":{"label":"Page 2, 6105-T6, thickness unbounded to .500 in, row Ultimate tensile strength","page":2},"state_id":"al-6105-t6","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0127,"minimum":null}},"id":"obs-48eaf669d5b84b0c03a6","material_id":"al-6105","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":240000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":240.0}},"source_id":"hydro-6005-6105","source_locator":{"label":"Page 2, 6105-T6, thickness unbounded to .500 in, row Yield strength, 0.2% offset","page":2},"state_id":"al-6105-t6","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0127,"minimum":0.0015748}},"id":"obs-de122bb49d8a9c14beeb","material_id":"al-6105","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits. Elongation testing is not required when a standard specimen cannot be taken or thickness is below .062 in.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.08},"kind":"lower_bound","reported":{"significant_figures":1,"unit":"%","value":8.0}},"source_id":"hydro-6005-6105","source_locator":{"label":"Page 2, 6105-T6, thickness unbounded to .500 in, row Elongation, gauge length 2 in or 4 specimen diameters","page":2},"state_id":"al-6105-t6","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15,"thickness_m":{"maximum":0.0127,"minimum":null}},"id":"obs-1a0c92251044b94dc29e","material_id":"al-6105","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":193.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":193.0}},"source_id":"hydro-6005-6105","source_locator":{"label":"Page 2, 6105-T6, thickness unbounded to .500 in, row Typical thermal conductivity at 25 °C","page":2},"state_id":"al-6105-t6","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"reference","conditions":{},"id":"obs-659a841ed80571d15f69","material_id":"al-6005a","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":2712.630661599906},"kind":"point","reported":{"significant_figures":2,"unit":"lb/in³","value":0.098}},"source_id":"hydro-6005a","source_locator":{"label":"Page 1, Alloy 6005A, row Density above chemical composition","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro alloy reference"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0063246,"minimum":null}},"id":"obs-ffdddeac9e4a67e6311c","material_id":"al-6005a","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":170000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":170.0}},"source_id":"hydro-6005a","source_locator":{"label":"Page 2, 6005A-T1, thickness unbounded to 0.249 in, row Ultimate tensile strength","page":2},"state_id":"al-6005a-t1","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0063246,"minimum":null}},"id":"obs-7235a172a05af6e3c321","material_id":"al-6005a","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":100000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":100.0}},"source_id":"hydro-6005a","source_locator":{"label":"Page 2, 6005A-T1, thickness unbounded to 0.249 in, row Yield strength, 0.2% offset","page":2},"state_id":"al-6005a-t1","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0063246,"minimum":0.0015748}},"id":"obs-33076a4381539f07b17b","material_id":"al-6005a","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits. Elongation testing is not required when a standard specimen cannot be taken or thickness is below .062 in.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.15},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":15.0}},"source_id":"hydro-6005a","source_locator":{"label":"Page 2, 6005A-T1, thickness unbounded to 0.249 in, row Elongation, gauge length 2 in or 4 specimen diameters","page":2},"state_id":"al-6005a-t1","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15,"thickness_m":{"maximum":0.0063246,"minimum":null}},"id":"obs-b9177e3a1e4cc1bda5ad","material_id":"al-6005a","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":176.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":176.0}},"source_id":"hydro-6005a","source_locator":{"label":"Page 2, 6005A-T1, thickness unbounded to 0.249 in, row Typical thermal conductivity at 25 °C","page":2},"state_id":"al-6005a-t1","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0063246,"minimum":null}},"id":"obs-2602a11469ee7c1dbe53","material_id":"al-6005a","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":260000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":260.0}},"source_id":"hydro-6005a","source_locator":{"label":"Page 2, 6005A-T5, thickness unbounded to 0.249 in, row Ultimate tensile strength","page":2},"state_id":"al-6005a-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0063246,"minimum":null}},"id":"obs-8f3bc6848eee3655a09d","material_id":"al-6005a","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":215000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":215.0}},"source_id":"hydro-6005a","source_locator":{"label":"Page 2, 6005A-T5, thickness unbounded to 0.249 in, row Yield strength, 0.2% offset","page":2},"state_id":"al-6005a-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0063246,"minimum":0.0015748}},"id":"obs-04cea90e303fa0b44ed2","material_id":"al-6005a","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits. Elongation testing is not required when a standard specimen cannot be taken or thickness is below .062 in.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.07},"kind":"lower_bound","reported":{"significant_figures":1,"unit":"%","value":7.0}},"source_id":"hydro-6005a","source_locator":{"label":"Page 2, 6005A-T5, thickness unbounded to 0.249 in, row Elongation, gauge length 2 in or 4 specimen diameters","page":2},"state_id":"al-6005a-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15,"thickness_m":{"maximum":0.0063246,"minimum":null}},"id":"obs-afd38e684beef9325460","material_id":"al-6005a","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":193.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":193.0}},"source_id":"hydro-6005a","source_locator":{"label":"Page 2, 6005A-T5, thickness unbounded to 0.249 in, row Typical thermal conductivity at 25 °C","page":2},"state_id":"al-6005a-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0253746,"minimum":0.00635}},"id":"obs-eab978a44a63e1704efa","material_id":"al-6005a","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":260000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":260.0}},"source_id":"hydro-6005a","source_locator":{"label":"Page 2, 6005A-T5, thickness .250 to 0.999 in, row Ultimate tensile strength","page":2},"state_id":"al-6005a-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0253746,"minimum":0.00635}},"id":"obs-198c7c074ad3841fce13","material_id":"al-6005a","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":215000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":215.0}},"source_id":"hydro-6005a","source_locator":{"label":"Page 2, 6005A-T5, thickness .250 to 0.999 in, row Yield strength, 0.2% offset","page":2},"state_id":"al-6005a-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0253746,"minimum":0.00635}},"id":"obs-adc134a35ab3390793b7","material_id":"al-6005a","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits. Elongation testing is not required when a standard specimen cannot be taken or thickness is below .062 in.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.09},"kind":"lower_bound","reported":{"significant_figures":1,"unit":"%","value":9.0}},"source_id":"hydro-6005a","source_locator":{"label":"Page 2, 6005A-T5, thickness .250 to 0.999 in, row Elongation, gauge length 2 in or 4 specimen diameters","page":2},"state_id":"al-6005a-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15,"thickness_m":{"maximum":0.0253746,"minimum":0.00635}},"id":"obs-32414041bebee03224af","material_id":"al-6005a","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":193.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":193.0}},"source_id":"hydro-6005a","source_locator":{"label":"Page 2, 6005A-T5, thickness .250 to 0.999 in, row Typical thermal conductivity at 25 °C","page":2},"state_id":"al-6005a-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0063246,"minimum":null}},"id":"obs-fdda1d229ebbb530049b","material_id":"al-6005a","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":260000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":260.0}},"source_id":"hydro-6005a","source_locator":{"label":"Page 2, 6005A-T61, thickness unbounded to 0.249 in, row Ultimate tensile strength","page":2},"state_id":"al-6005a-t61","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0063246,"minimum":null}},"id":"obs-52eb4124e0a31befa907","material_id":"al-6005a","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":240000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":240.0}},"source_id":"hydro-6005a","source_locator":{"label":"Page 2, 6005A-T61, thickness unbounded to 0.249 in, row Yield strength, 0.2% offset","page":2},"state_id":"al-6005a-t61","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0063246,"minimum":0.0015748}},"id":"obs-4311cc744a810fc75325","material_id":"al-6005a","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits. Elongation testing is not required when a standard specimen cannot be taken or thickness is below .062 in.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.08},"kind":"lower_bound","reported":{"significant_figures":1,"unit":"%","value":8.0}},"source_id":"hydro-6005a","source_locator":{"label":"Page 2, 6005A-T61, thickness unbounded to 0.249 in, row Elongation, gauge length 2 in or 4 specimen diameters","page":2},"state_id":"al-6005a-t61","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15,"thickness_m":{"maximum":0.0063246,"minimum":null}},"id":"obs-6fe2da9811b9622214e2","material_id":"al-6005a","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":188.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":188.0}},"source_id":"hydro-6005a","source_locator":{"label":"Page 2, 6005A-T61, thickness unbounded to 0.249 in, row Typical thermal conductivity at 25 °C","page":2},"state_id":"al-6005a-t61","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0254,"minimum":0.00635}},"id":"obs-030af293a39467ffba8a","material_id":"al-6005a","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":260000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":260.0}},"source_id":"hydro-6005a","source_locator":{"label":"Page 2, 6005A-T61, thickness 0.250 to 1.000 in, row Ultimate tensile strength","page":2},"state_id":"al-6005a-t61","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0254,"minimum":0.00635}},"id":"obs-3c5e9a2094ad1016c338","material_id":"al-6005a","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":240000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":240.0}},"source_id":"hydro-6005a","source_locator":{"label":"Page 2, 6005A-T61, thickness 0.250 to 1.000 in, row Yield strength, 0.2% offset","page":2},"state_id":"al-6005a-t61","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0254,"minimum":0.00635}},"id":"obs-68b4714ce0df731fb812","material_id":"al-6005a","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits. Elongation testing is not required when a standard specimen cannot be taken or thickness is below .062 in.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.1},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":10.0}},"source_id":"hydro-6005a","source_locator":{"label":"Page 2, 6005A-T61, thickness 0.250 to 1.000 in, row Elongation, gauge length 2 in or 4 specimen diameters","page":2},"state_id":"al-6005a-t61","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15,"thickness_m":{"maximum":0.0254,"minimum":0.00635}},"id":"obs-17c06df2cb37da4aa49f","material_id":"al-6005a","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":188.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":188.0}},"source_id":"hydro-6005a","source_locator":{"label":"Page 2, 6005A-T61, thickness 0.250 to 1.000 in, row Typical thermal conductivity at 25 °C","page":2},"state_id":"al-6005a-t61","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"reference","conditions":{},"id":"obs-955ec42cb0baf05950ae","material_id":"al-6063","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":2684.950756889703},"kind":"point","reported":{"significant_figures":2,"unit":"lb/in³","value":0.097}},"source_id":"hydro-6063","source_locator":{"label":"Page 1, Alloy 6063, row Density above chemical composition","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro alloy reference"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0127,"minimum":null}},"id":"obs-2c5d21dc8ee975374f97","material_id":"al-6063","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":115000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":115.0}},"source_id":"hydro-6063","source_locator":{"label":"Page 2, 6063-T1, thickness unbounded to .500 in, row Ultimate tensile strength","page":2},"state_id":"al-6063-t1","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0127,"minimum":null}},"id":"obs-f77bddb912e4cae70f0b","material_id":"al-6063","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":60000000.0},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"MPa","value":60.0}},"source_id":"hydro-6063","source_locator":{"label":"Page 2, 6063-T1, thickness unbounded to .500 in, row Yield strength, 0.2% offset","page":2},"state_id":"al-6063-t1","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0127,"minimum":0.0015748}},"id":"obs-56a725bae478452ad3f3","material_id":"al-6063","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits. Elongation testing is not required when a standard specimen cannot be taken or thickness is below .062 in.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.12},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":12.0}},"source_id":"hydro-6063","source_locator":{"label":"Page 2, 6063-T1, thickness unbounded to .500 in, row Elongation, gauge length 2 in or 4 specimen diameters","page":2},"state_id":"al-6063-t1","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15,"thickness_m":{"maximum":0.0127,"minimum":null}},"id":"obs-dac23b02d073ae77641d","material_id":"al-6063","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":193.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":193.0}},"source_id":"hydro-6063","source_locator":{"label":"Page 2, 6063-T1, thickness unbounded to .500 in, row Typical thermal conductivity at 25 °C","page":2},"state_id":"al-6063-t1","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0254,"minimum":0.0127254}},"id":"obs-745247089afcd8de0173","material_id":"al-6063","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":110000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":110.0}},"source_id":"hydro-6063","source_locator":{"label":"Page 2, 6063-T1, thickness .501 to 1.000 in, row Ultimate tensile strength","page":2},"state_id":"al-6063-t1","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0254,"minimum":0.0127254}},"id":"obs-6e4788d7f2265e096de7","material_id":"al-6063","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":55000000.0},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"MPa","value":55.0}},"source_id":"hydro-6063","source_locator":{"label":"Page 2, 6063-T1, thickness .501 to 1.000 in, row Yield strength, 0.2% offset","page":2},"state_id":"al-6063-t1","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0254,"minimum":0.0127254}},"id":"obs-e1019d163b5470b17129","material_id":"al-6063","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits. Elongation testing is not required when a standard specimen cannot be taken or thickness is below .062 in.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.12},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":12.0}},"source_id":"hydro-6063","source_locator":{"label":"Page 2, 6063-T1, thickness .501 to 1.000 in, row Elongation, gauge length 2 in or 4 specimen diameters","page":2},"state_id":"al-6063-t1","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15,"thickness_m":{"maximum":0.0254,"minimum":0.0127254}},"id":"obs-f0aa58c638862830bad3","material_id":"al-6063","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":193.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":193.0}},"source_id":"hydro-6063","source_locator":{"label":"Page 2, 6063-T1, thickness .501 to 1.000 in, row Typical thermal conductivity at 25 °C","page":2},"state_id":"al-6063-t1","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0127,"minimum":null}},"id":"obs-6058dd875aa30d523355","material_id":"al-6063","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":130000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":130.0}},"source_id":"hydro-6063","source_locator":{"label":"Page 2, 6063-T4, thickness unbounded to .500 in, row Ultimate tensile strength","page":2},"state_id":"al-6063-t4","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0127,"minimum":null}},"id":"obs-92bff4244313a5b46db7","material_id":"al-6063","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":70000000.0},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"MPa","value":70.0}},"source_id":"hydro-6063","source_locator":{"label":"Page 2, 6063-T4, thickness unbounded to .500 in, row Yield strength, 0.2% offset","page":2},"state_id":"al-6063-t4","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0127,"minimum":0.0015748}},"id":"obs-c3b5abd7282b3d5e51b6","material_id":"al-6063","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits. Elongation testing is not required when a standard specimen cannot be taken or thickness is below .062 in.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.14},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":14.0}},"source_id":"hydro-6063","source_locator":{"label":"Page 2, 6063-T4, thickness unbounded to .500 in, row Elongation, gauge length 2 in or 4 specimen diameters","page":2},"state_id":"al-6063-t4","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15,"thickness_m":{"maximum":0.0127,"minimum":null}},"id":"obs-3b5628defd5fed31a6ad","material_id":"al-6063","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":193.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":193.0}},"source_id":"hydro-6063","source_locator":{"label":"Page 2, 6063-T4, thickness unbounded to .500 in, row Typical thermal conductivity at 25 °C","page":2},"state_id":"al-6063-t4","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0254,"minimum":0.0127254}},"id":"obs-1c10697a3d564bc7f610","material_id":"al-6063","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":125000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":125.0}},"source_id":"hydro-6063","source_locator":{"label":"Page 2, 6063-T4, thickness .501 to 1.000 in, row Ultimate tensile strength","page":2},"state_id":"al-6063-t4","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0254,"minimum":0.0127254}},"id":"obs-cbb6f41edb377c0bdabd","material_id":"al-6063","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":60000000.0},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"MPa","value":60.0}},"source_id":"hydro-6063","source_locator":{"label":"Page 2, 6063-T4, thickness .501 to 1.000 in, row Yield strength, 0.2% offset","page":2},"state_id":"al-6063-t4","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0254,"minimum":0.0127254}},"id":"obs-2fdc8d4a2192a6119d6a","material_id":"al-6063","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits. Elongation testing is not required when a standard specimen cannot be taken or thickness is below .062 in.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.14},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":14.0}},"source_id":"hydro-6063","source_locator":{"label":"Page 2, 6063-T4, thickness .501 to 1.000 in, row Elongation, gauge length 2 in or 4 specimen diameters","page":2},"state_id":"al-6063-t4","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15,"thickness_m":{"maximum":0.0254,"minimum":0.0127254}},"id":"obs-692175ab7ccff2a6ae21","material_id":"al-6063","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":193.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":193.0}},"source_id":"hydro-6063","source_locator":{"label":"Page 2, 6063-T4, thickness .501 to 1.000 in, row Typical thermal conductivity at 25 °C","page":2},"state_id":"al-6063-t4","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0127,"minimum":null}},"id":"obs-00950b83478255ecb176","material_id":"al-6063","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":150000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":150.0}},"source_id":"hydro-6063","source_locator":{"label":"Page 2, 6063-T5, thickness unbounded to .500 in, row Ultimate tensile strength","page":2},"state_id":"al-6063-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0127,"minimum":null}},"id":"obs-1f2f39aad6703908017f","material_id":"al-6063","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":110000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":110.0}},"source_id":"hydro-6063","source_locator":{"label":"Page 2, 6063-T5, thickness unbounded to .500 in, row Yield strength, 0.2% offset","page":2},"state_id":"al-6063-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0127,"minimum":0.0015748}},"id":"obs-1447c210cb1e143ff2c7","material_id":"al-6063","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits. Elongation testing is not required when a standard specimen cannot be taken or thickness is below .062 in.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.08},"kind":"lower_bound","reported":{"significant_figures":1,"unit":"%","value":8.0}},"source_id":"hydro-6063","source_locator":{"label":"Page 2, 6063-T5, thickness unbounded to .500 in, row Elongation, gauge length 2 in or 4 specimen diameters","page":2},"state_id":"al-6063-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15,"thickness_m":{"maximum":0.0127,"minimum":null}},"id":"obs-33b1524e23a90c46ddc0","material_id":"al-6063","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":209.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":209.0}},"source_id":"hydro-6063","source_locator":{"label":"Page 2, 6063-T5, thickness unbounded to .500 in, row Typical thermal conductivity at 25 °C","page":2},"state_id":"al-6063-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0254,"minimum":0.0127254}},"id":"obs-31ed52261096327be1b0","material_id":"al-6063","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":145000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":145.0}},"source_id":"hydro-6063","source_locator":{"label":"Page 2, 6063-T5, thickness .501 to 1.000 in, row Ultimate tensile strength","page":2},"state_id":"al-6063-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0254,"minimum":0.0127254}},"id":"obs-d3c9540d4a8ca758db36","material_id":"al-6063","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":105000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":105.0}},"source_id":"hydro-6063","source_locator":{"label":"Page 2, 6063-T5, thickness .501 to 1.000 in, row Yield strength, 0.2% offset","page":2},"state_id":"al-6063-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0254,"minimum":0.0127254}},"id":"obs-caecc083c8596a16f47c","material_id":"al-6063","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits. Elongation testing is not required when a standard specimen cannot be taken or thickness is below .062 in.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.08},"kind":"lower_bound","reported":{"significant_figures":1,"unit":"%","value":8.0}},"source_id":"hydro-6063","source_locator":{"label":"Page 2, 6063-T5, thickness .501 to 1.000 in, row Elongation, gauge length 2 in or 4 specimen diameters","page":2},"state_id":"al-6063-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15,"thickness_m":{"maximum":0.0254,"minimum":0.0127254}},"id":"obs-2c65d46e66d610299382","material_id":"al-6063","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":209.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":209.0}},"source_id":"hydro-6063","source_locator":{"label":"Page 2, 6063-T5, thickness .501 to 1.000 in, row Typical thermal conductivity at 25 °C","page":2},"state_id":"al-6063-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0031496,"minimum":null}},"id":"obs-edecf29bcb8be77eb289","material_id":"al-6063","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":205000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":205.0}},"source_id":"hydro-6063","source_locator":{"label":"Page 2, 6063-T6, thickness unbounded to .124 in, row Ultimate tensile strength","page":2},"state_id":"al-6063-t6","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0031496,"minimum":null}},"id":"obs-f1eee01fdae6af0d5c3e","material_id":"al-6063","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":170000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":170.0}},"source_id":"hydro-6063","source_locator":{"label":"Page 2, 6063-T6, thickness unbounded to .124 in, row Yield strength, 0.2% offset","page":2},"state_id":"al-6063-t6","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0031496,"minimum":0.0015748}},"id":"obs-ee6f46e587ff270dfb0b","material_id":"al-6063","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits. Elongation testing is not required when a standard specimen cannot be taken or thickness is below .062 in.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.08},"kind":"lower_bound","reported":{"significant_figures":1,"unit":"%","value":8.0}},"source_id":"hydro-6063","source_locator":{"label":"Page 2, 6063-T6, thickness unbounded to .124 in, row Elongation, gauge length 2 in or 4 specimen diameters","page":2},"state_id":"al-6063-t6","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15,"thickness_m":{"maximum":0.0031496,"minimum":null}},"id":"obs-405eff646732835ad78f","material_id":"al-6063","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":201.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":201.0}},"source_id":"hydro-6063","source_locator":{"label":"Page 2, 6063-T6, thickness unbounded to .124 in, row Typical thermal conductivity at 25 °C","page":2},"state_id":"al-6063-t6","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"reference","conditions":{},"id":"obs-10f26123d8044c65bd59","material_id":"al-6042","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":2712.630661599906},"kind":"point","reported":{"significant_figures":2,"unit":"lb/in³","value":0.098}},"source_id":"hydro-6042","source_locator":{"label":"Page 2, Alloy 6042, row Density above chemical composition","page":2},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro alloy reference"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":null,"minimum":0.0127}},"id":"obs-cb460ffc922528f0ff0c","material_id":"al-6042","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":290000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":290.0}},"source_id":"hydro-6042","source_locator":{"label":"Page 2, 6042-T5, thickness .500 to unbounded in, row Ultimate tensile strength","page":2},"state_id":"al-6042-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":null,"minimum":0.0127}},"id":"obs-59add44829ea7befb6ac","material_id":"al-6042","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":240000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":240.0}},"source_id":"hydro-6042","source_locator":{"label":"Page 2, 6042-T5, thickness .500 to unbounded in, row Yield strength, 0.2% offset","page":2},"state_id":"al-6042-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":null,"minimum":0.0127}},"id":"obs-967920e25c9a53e81e02","material_id":"al-6042","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits. Elongation testing is not required when a standard specimen cannot be taken or thickness is below .062 in.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.1},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":10.0}},"source_id":"hydro-6042","source_locator":{"label":"Page 2, 6042-T5, thickness .500 to unbounded in, row Elongation, gauge length 2 in or 4 specimen diameters","page":2},"state_id":"al-6042-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15,"thickness_m":{"maximum":null,"minimum":0.0127}},"id":"obs-1ca8e76e8ab07d7fcb3e","material_id":"al-6042","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":167.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":167.0}},"source_id":"hydro-6042","source_locator":{"label":"Page 2, 6042-T5, thickness .500 to unbounded in, row Typical thermal conductivity at 25 °C","page":2},"state_id":"al-6042-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"reference","conditions":{},"id":"obs-9a6a415a6e264730664d","material_id":"al-6082","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":2712.630661599906},"kind":"point","reported":{"significant_figures":2,"unit":"lb/in³","value":0.098}},"source_id":"hydro-6082","source_locator":{"label":"Page 1, Alloy 6082, row Density above chemical composition","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro alloy reference"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0127,"minimum":0.002032}},"id":"obs-3c2d2cd60b4ca5b436e8","material_id":"al-6082","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":270000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":270.0}},"source_id":"hydro-6082","source_locator":{"label":"Page 2, 6082-T5, thickness 0.080 to 0.500 in, row Ultimate tensile strength","page":2},"state_id":"al-6082-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0127,"minimum":0.002032}},"id":"obs-42f30fd1241ac67be7a9","material_id":"al-6082","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":230000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":230.0}},"source_id":"hydro-6082","source_locator":{"label":"Page 2, 6082-T5, thickness 0.080 to 0.500 in, row Yield strength, 0.2% offset","page":2},"state_id":"al-6082-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0127,"minimum":0.002032}},"id":"obs-d8f8441a393a258d3cf5","material_id":"al-6082","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits. Elongation testing is not required when a standard specimen cannot be taken or thickness is below .062 in.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.08},"kind":"lower_bound","reported":{"significant_figures":1,"unit":"%","value":8.0}},"source_id":"hydro-6082","source_locator":{"label":"Page 2, 6082-T5, thickness 0.080 to 0.500 in, row Elongation, gauge length 2 in or 4 specimen diameters","page":2},"state_id":"al-6082-t5","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.019049999999999997,"minimum":0.00508}},"id":"obs-631881f39d3bd60c7e94","material_id":"al-6082","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":310000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":310.0}},"source_id":"hydro-6082","source_locator":{"label":"Page 2, 6082-T6, thickness 0.200 to 0.750 in, row Ultimate tensile strength","page":2},"state_id":"al-6082-t6","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.019049999999999997,"minimum":0.00508}},"id":"obs-a8f00f0d3850520045e7","material_id":"al-6082","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":260000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":260.0}},"source_id":"hydro-6082","source_locator":{"label":"Page 2, 6082-T6, thickness 0.200 to 0.750 in, row Yield strength, 0.2% offset","page":2},"state_id":"al-6082-t6","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.019049999999999997,"minimum":0.00508}},"id":"obs-1a49f0d3d7f06bea18e5","material_id":"al-6082","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits. Elongation testing is not required when a standard specimen cannot be taken or thickness is below .062 in.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.06},"kind":"lower_bound","reported":{"significant_figures":1,"unit":"%","value":6.0}},"source_id":"hydro-6082","source_locator":{"label":"Page 2, 6082-T6, thickness 0.200 to 0.750 in, row Elongation, gauge length 2 in or 4 specimen diameters","page":2},"state_id":"al-6082-t6","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15,"thickness_m":{"maximum":0.019049999999999997,"minimum":0.00508}},"id":"obs-aa266d42c598cf899916","material_id":"al-6082","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":172.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":172.0}},"source_id":"hydro-6082","source_locator":{"label":"Page 2, 6082-T6, thickness 0.200 to 0.750 in, row Typical thermal conductivity at 25 °C","page":2},"state_id":"al-6082-t6","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.15239999999999998,"minimum":0.0190754}},"id":"obs-68123a202fd1fc43f110","material_id":"al-6082","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":310000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":310.0}},"source_id":"hydro-6082","source_locator":{"label":"Page 2, 6082-T6, thickness 0.751 to 6.000 in, row Ultimate tensile strength","page":2},"state_id":"al-6082-t6","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.15239999999999998,"minimum":0.0190754}},"id":"obs-cd710e3691d77d29e099","material_id":"al-6082","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":260000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":260.0}},"source_id":"hydro-6082","source_locator":{"label":"Page 2, 6082-T6, thickness 0.751 to 6.000 in, row Yield strength, 0.2% offset","page":2},"state_id":"al-6082-t6","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.15239999999999998,"minimum":0.0190754}},"id":"obs-4a2d1c4810935754e607","material_id":"al-6082","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits. Elongation testing is not required when a standard specimen cannot be taken or thickness is below .062 in.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.08},"kind":"lower_bound","reported":{"significant_figures":1,"unit":"%","value":8.0}},"source_id":"hydro-6082","source_locator":{"label":"Page 2, 6082-T6, thickness 0.751 to 6.000 in, row Elongation, gauge length 2 in or 4 specimen diameters","page":2},"state_id":"al-6082-t6","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15,"thickness_m":{"maximum":0.15239999999999998,"minimum":0.0190754}},"id":"obs-74e21dd57ffa08eea4c4","material_id":"al-6082","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":172.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":172.0}},"source_id":"hydro-6082","source_locator":{"label":"Page 2, 6082-T6, thickness 0.751 to 6.000 in, row Typical thermal conductivity at 25 °C","page":2},"state_id":"al-6082-t6","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.2032,"minimum":0.1524254}},"id":"obs-57e4c0ce898b76ac4901","material_id":"al-6082","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":280000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":280.0}},"source_id":"hydro-6082","source_locator":{"label":"Page 2, 6082-T6, thickness 6.001 to 8.000 in, row Ultimate tensile strength","page":2},"state_id":"al-6082-t6","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.2032,"minimum":0.1524254}},"id":"obs-ea5bcbd22cb5151120b4","material_id":"al-6082","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":240000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":240.0}},"source_id":"hydro-6082","source_locator":{"label":"Page 2, 6082-T6, thickness 6.001 to 8.000 in, row Yield strength, 0.2% offset","page":2},"state_id":"al-6082-t6","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.2032,"minimum":0.1524254}},"id":"obs-64dfa5515af67cef5b74","material_id":"al-6082","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits. Elongation testing is not required when a standard specimen cannot be taken or thickness is below .062 in.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.06},"kind":"lower_bound","reported":{"significant_figures":1,"unit":"%","value":6.0}},"source_id":"hydro-6082","source_locator":{"label":"Page 2, 6082-T6, thickness 6.001 to 8.000 in, row Elongation, gauge length 2 in or 4 specimen diameters","page":2},"state_id":"al-6082-t6","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15,"thickness_m":{"maximum":0.2032,"minimum":0.1524254}},"id":"obs-7d462f6bb379d5af6d7d","material_id":"al-6082","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":172.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":172.0}},"source_id":"hydro-6082","source_locator":{"label":"Page 2, 6082-T6, thickness 6.001 to 8.000 in, row Typical thermal conductivity at 25 °C","page":2},"state_id":"al-6082-t6","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits (Aluminum Association)"},"uncertainty":null},{"basis":"reference","conditions":{},"id":"obs-2753288b7a3eea10a557","material_id":"al-6101","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":2684.950756889703},"kind":"point","reported":{"significant_figures":2,"unit":"lb/in³","value":0.097}},"source_id":"hydro-6101","source_locator":{"label":"Page 2, Alloy 6101, row Density above chemical composition","page":2},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro alloy reference"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0127,"minimum":0.003175}},"id":"obs-5c1b71e8bc2997ba886d","material_id":"al-6101","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":200000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":200.0}},"source_id":"hydro-6101","source_locator":{"label":"Page 2, 6101-T6, thickness 0.125 to 0.500 in, row Ultimate tensile strength","page":2},"state_id":"al-6101-t6","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0127,"minimum":0.003175}},"id":"obs-9425bd56706cb12cc3c7","material_id":"al-6101","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":170000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":170.0}},"source_id":"hydro-6101","source_locator":{"label":"Page 2, 6101-T6, thickness 0.125 to 0.500 in, row Yield strength, 0.2% offset","page":2},"state_id":"al-6101-t6","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15,"thickness_m":{"maximum":0.0127,"minimum":0.003175}},"id":"obs-1651a386464669013dfa","material_id":"al-6101","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":218.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":218.0}},"source_id":"hydro-6101","source_locator":{"label":"Page 2, 6101-T6, thickness 0.125 to 0.500 in, row Typical thermal conductivity at 25 °C","page":2},"state_id":"al-6101-t6","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0254,"minimum":0.003175}},"id":"obs-d96c74e09741e9b88f26","material_id":"al-6101","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":185000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":185.0}},"source_id":"hydro-6101","source_locator":{"label":"Page 2, 6101-T63, thickness 0.125 to 1.000 in, row Ultimate tensile strength","page":2},"state_id":"al-6101-t63","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0254,"minimum":0.003175}},"id":"obs-a8fceaf4794889451e41","material_id":"al-6101","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":150000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":150.0}},"source_id":"hydro-6101","source_locator":{"label":"Page 2, 6101-T63, thickness 0.125 to 1.000 in, row Yield strength, 0.2% offset","page":2},"state_id":"al-6101-t63","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15,"thickness_m":{"maximum":0.0254,"minimum":0.003175}},"id":"obs-e6fa994f677d7e0b6357","material_id":"al-6101","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":218.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":218.0}},"source_id":"hydro-6101","source_locator":{"label":"Page 2, 6101-T63, thickness 0.125 to 1.000 in, row Typical thermal conductivity at 25 °C","page":2},"state_id":"al-6101-t63","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0254,"minimum":0.003175}},"id":"obs-80aa37f742a222df594c","material_id":"al-6101","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":100000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":100.0}},"source_id":"hydro-6101","source_locator":{"label":"Page 2, 6101-T64, thickness 0.125 to 1.000 in, row Ultimate tensile strength","page":2},"state_id":"al-6101-t64","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":0.0254,"minimum":0.003175}},"id":"obs-28d0051caae8244e1119","material_id":"al-6101","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":55000000.0},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"MPa","value":55.0}},"source_id":"hydro-6101","source_locator":{"label":"Page 2, 6101-T64, thickness 0.125 to 1.000 in, row Yield strength, 0.2% offset","page":2},"state_id":"al-6101-t64","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15,"thickness_m":{"maximum":0.0254,"minimum":0.003175}},"id":"obs-8a67c86177f8d3c1ef16","material_id":"al-6101","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":226.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":226.0}},"source_id":"hydro-6101","source_locator":{"label":"Page 2, 6101-T64, thickness 0.125 to 1.000 in, row Typical thermal conductivity at 25 °C","page":2},"state_id":"al-6101-t64","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"reference","conditions":{},"id":"obs-63b19be9be9676530c8d","material_id":"al-6262","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":2712.630661599906},"kind":"point","reported":{"significant_figures":2,"unit":"lb/in³","value":0.098}},"source_id":"hydro-6262","source_locator":{"label":"Page 1, Alloy 6262, row Density above chemical composition","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro alloy reference"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion"},"id":"obs-21f539c5f002cd2ff4a4","material_id":"al-6262","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":260000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":260.0}},"source_id":"hydro-6262","source_locator":{"label":"Page 2, 6262-T6, thickness all thicknesses, row Ultimate tensile strength","page":2},"state_id":"al-6262-t6","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion"},"id":"obs-374dba2015a53baac6e7","material_id":"al-6262","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":240000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":240.0}},"source_id":"hydro-6262","source_locator":{"label":"Page 2, 6262-T6, thickness all thicknesses, row Yield strength, 0.2% offset","page":2},"state_id":"al-6262-t6","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"extrusion","thickness_m":{"maximum":null,"minimum":0.0015748}},"id":"obs-66d2f68f0ee50bd8d363","material_id":"al-6262","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits. Elongation testing is not required when a standard specimen cannot be taken or thickness is below .062 in.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.1},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":10.0}},"source_id":"hydro-6262","source_locator":{"label":"Page 2, 6262-T6, thickness all thicknesses, row Elongation","page":2},"state_id":"al-6262-t6","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"extrusion","temperature_K":298.15},"id":"obs-312f1040dd93208d20d2","material_id":"al-6262","notes":"Thickness follows the source inches column; cross section of the tensile specimen determines the applicable limits.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":167.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":167.0}},"source_id":"hydro-6262","source_locator":{"label":"Page 2, 6262-T6, thickness all thicknesses, row Typical thermal conductivity at 25 °C","page":2},"state_id":"al-6262-t6","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Hydro extrusion property limits"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-6a5d8af50109347176b7","material_id":"cu-c10100","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8940.609221395609},"kind":"point","reported":{"significant_figures":3,"unit":"lb/in³","value":0.323}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C10100, Physical Properties (printed page 74), row Density at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-5dfb830207f424d415f6","material_id":"cu-c10100","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":391.1460345827441},"kind":"point","reported":{"significant_figures":3,"unit":"Btu/(ft·hr·°F)","value":226.0}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C10100, Physical Properties (printed page 74), row Thermal conductivity at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-e5aa94ebbed46e459e56","material_id":"cu-c10100","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":385.1856},"kind":"point","reported":{"significant_figures":2,"unit":"Btu/(lb·°F)","value":0.092}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C10100, Physical Properties (printed page 74), row Specific heat at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-2951b7ccc9d2e0bf6d58","material_id":"cu-c10200","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8940.609221395609},"kind":"point","reported":{"significant_figures":3,"unit":"lb/in³","value":0.323}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C10200, Physical Properties (printed page 74), row Density at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-c83d67dd792b903f13a5","material_id":"cu-c10200","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":391.1460345827441},"kind":"point","reported":{"significant_figures":3,"unit":"Btu/(ft·hr·°F)","value":226.0}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C10200, Physical Properties (printed page 74), row Thermal conductivity at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-38b3361f1ce4b48e4db1","material_id":"cu-c10200","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":385.1856},"kind":"point","reported":{"significant_figures":2,"unit":"Btu/(lb·°F)","value":0.092}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C10200, Physical Properties (printed page 74), row Specific heat at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-47340061efac0ce810ee","material_id":"cu-c11000","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"density","result":{"canonical":{"maximum":8940.609221395609,"minimum":8885.249411975203,"unit":"kg/m^3"},"kind":"interval","reported":{"maximum":0.323,"minimum":0.321,"significant_figures":3,"unit":"lb/in³"}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C11000, Physical Properties (printed page 74), row Density at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-c37ed6aa5a127b2230e6","material_id":"cu-c11000","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":391.1460345827441},"kind":"point","reported":{"significant_figures":3,"unit":"Btu/(ft·hr·°F)","value":226.0}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C11000, Physical Properties (printed page 74), row Thermal conductivity at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-5fb6ed6953ebcd2fd009","material_id":"cu-c11000","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":385.1856},"kind":"point","reported":{"significant_figures":2,"unit":"Btu/(lb·°F)","value":0.092}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C11000, Physical Properties (printed page 74), row Specific heat at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-55f47548f4bfae36e2d6","material_id":"cu-c12200","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8940.609221395609},"kind":"point","reported":{"significant_figures":3,"unit":"lb/in³","value":0.323}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C12200, Physical Properties (printed page 74), row Density at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-1425329b3f51f3c690e0","material_id":"cu-c12200","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":339.2239945938843},"kind":"point","reported":{"significant_figures":3,"unit":"Btu/(ft·hr·°F)","value":196.0}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C12200, Physical Properties (printed page 74), row Thermal conductivity at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-d4913d5a5d83dcdc4271","material_id":"cu-c12200","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":385.1856},"kind":"point","reported":{"significant_figures":2,"unit":"Btu/(lb·°F)","value":0.092}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C12200, Physical Properties (printed page 74), row Specific heat at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-fe123c0964a265442590","material_id":"cu-c14300","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8940.609221395609},"kind":"point","reported":{"significant_figures":3,"unit":"lb/in³","value":0.323}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C14300, Physical Properties (printed page 74), row Density at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-56ea77c087df6120e99e","material_id":"cu-c14300","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":377.3001572523815},"kind":"point","reported":{"significant_figures":3,"unit":"Btu/(ft·hr·°F)","value":218.0}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C14300, Physical Properties (printed page 74), row Thermal conductivity at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-8aff23fe1a9b36374065","material_id":"cu-c14300","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":385.1856},"kind":"point","reported":{"significant_figures":2,"unit":"Btu/(lb·°F)","value":0.092}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C14300, Physical Properties (printed page 74), row Specific heat at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-369084487db7e59b5163","material_id":"cu-c14500","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8940.609221395609},"kind":"point","reported":{"significant_figures":3,"unit":"lb/in³","value":0.323}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C14500, Physical Properties (printed page 74), row Density at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-0b406bf9ad63aec480bf","material_id":"cu-c14500","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":354.80060659054226},"kind":"point","reported":{"significant_figures":3,"unit":"Btu/(ft·hr·°F)","value":205.0}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C14500, Physical Properties (printed page 74), row Thermal conductivity at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-b97a512e27d76069ca60","material_id":"cu-c14500","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":385.1856},"kind":"point","reported":{"significant_figures":2,"unit":"Btu/(lb·°F)","value":0.092}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C14500, Physical Properties (printed page 74), row Specific heat at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-4ca464d42b9d2355a3e1","material_id":"cu-c17200","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8248.61160364053},"kind":"point","reported":{"significant_figures":3,"unit":"lb/in³","value":0.298}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C17200, Physical Properties (printed page 74), row Density at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-067e92521dc344912781","material_id":"cu-c17200","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"thermal_conductivity","result":{"canonical":{"maximum":129.8050999721496,"minimum":107.30554931031034,"unit":"W/(m*K)"},"kind":"interval","reported":{"maximum":75.0,"minimum":62.0,"significant_figures":2,"unit":"Btu/(ft·hr·°F)"}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C17200, Physical Properties (printed page 74), row Thermal conductivity at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-9928b1bbc74bdf9c3c32","material_id":"cu-c17200","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":418.68000000000006},"kind":"point","reported":{"significant_figures":2,"unit":"Btu/(lb·°F)","value":0.1}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C17200, Physical Properties (printed page 74), row Specific heat at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-ef8b72cd0c7ec662407e","material_id":"cu-c17300","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8248.61160364053},"kind":"point","reported":{"significant_figures":3,"unit":"lb/in³","value":0.298}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C17300, Physical Properties (printed page 74), row Density at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-e7c2b34493f774b6219b","material_id":"cu-c17300","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"thermal_conductivity","result":{"canonical":{"maximum":129.8050999721496,"minimum":107.30554931031034,"unit":"W/(m*K)"},"kind":"interval","reported":{"maximum":75.0,"minimum":62.0,"significant_figures":2,"unit":"Btu/(ft·hr·°F)"}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C17300, Physical Properties (printed page 74), row Thermal conductivity at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-a14660e0a292e75f81cd","material_id":"cu-c17300","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":418.68000000000006},"kind":"point","reported":{"significant_figures":2,"unit":"Btu/(lb·°F)","value":0.1}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C17300, Physical Properties (printed page 74), row Specific heat at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-939d110ed42859b0b5ae","material_id":"cu-c17510","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8829.889602554797},"kind":"point","reported":{"significant_figures":3,"unit":"lb/in³","value":0.319}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C17510, Physical Properties (printed page 74), row Density at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-d6442d9012ca5094b61b","material_id":"cu-c17510","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":249.22579194652724},"kind":"point","reported":{"significant_figures":3,"unit":"Btu/(ft·hr·°F)","value":144.0}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C17510, Physical Properties (printed page 74), row Thermal conductivity at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-0dc97515d5264aa91ca3","material_id":"cu-c18000","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8719.169983713984},"kind":"point","reported":{"significant_figures":3,"unit":"lb/in³","value":0.315}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C18000, Physical Properties (printed page 74), row Density at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-a22bc273f0c0721605eb","material_id":"cu-c18000","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":216.341833286916},"kind":"point","reported":{"significant_figures":3,"unit":"Btu/(ft·hr·°F)","value":125.0}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C18000, Physical Properties (printed page 74), row Thermal conductivity at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-e88db762980ec0826e1d","material_id":"cu-c18200","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8885.249411975203},"kind":"point","reported":{"significant_figures":3,"unit":"lb/in³","value":0.321}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C18200, Physical Properties (printed page 74), row Density at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-b9f40cc142e5aca8ae76","material_id":"cu-c18200","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":385.1856},"kind":"point","reported":{"significant_figures":2,"unit":"Btu/(lb·°F)","value":0.092}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C18200, Physical Properties (printed page 74), row Specific heat at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-bd79a80dbecaffdcf7f4","material_id":"cu-c18700","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8940.609221395609},"kind":"point","reported":{"significant_figures":3,"unit":"lb/in³","value":0.323}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C18700, Physical Properties (printed page 74), row Density at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-da5e7e89b8155c5560f7","material_id":"cu-c18700","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":377.3001572523815},"kind":"point","reported":{"significant_figures":3,"unit":"Btu/(ft·hr·°F)","value":218.0}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C18700, Physical Properties (printed page 74), row Thermal conductivity at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-24c40db53f5927bbabac","material_id":"cu-c18700","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":385.1856},"kind":"point","reported":{"significant_figures":2,"unit":"Btu/(lb·°F)","value":0.092}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C18700, Physical Properties (printed page 74), row Specific heat at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-ce22b7fad5d1bb84e895","material_id":"cu-c21000","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8857.569507265},"kind":"point","reported":{"significant_figures":3,"unit":"lb/in³","value":0.32}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C21000, Physical Properties (printed page 74), row Density at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-346d0a426556a0f63840","material_id":"cu-c21000","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":233.64917994986928},"kind":"point","reported":{"significant_figures":3,"unit":"Btu/(ft·hr·°F)","value":135.0}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C21000, Physical Properties (printed page 74), row Thermal conductivity at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-ccb558713cd7f53633c9","material_id":"cu-c21000","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":376.812},"kind":"point","reported":{"significant_figures":1,"unit":"Btu/(lb·°F)","value":0.09}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C21000, Physical Properties (printed page 74), row Specific heat at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-b032c343557a17d512da","material_id":"cu-c22000","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8802.209697844593},"kind":"point","reported":{"significant_figures":3,"unit":"lb/in³","value":0.318}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C22000, Physical Properties (printed page 74), row Density at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-f489de69d130f8d238ea","material_id":"cu-c22000","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":188.65007862619075},"kind":"point","reported":{"significant_figures":3,"unit":"Btu/(ft·hr·°F)","value":109.0}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C22000, Physical Properties (printed page 74), row Thermal conductivity at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-5dcd9d1e8be9f53985b3","material_id":"cu-c22000","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":376.812},"kind":"point","reported":{"significant_figures":1,"unit":"Btu/(lb·°F)","value":0.09}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C22000, Physical Properties (printed page 74), row Specific heat at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-787277d71983cbf4d205","material_id":"cu-c23000","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8746.849888424187},"kind":"point","reported":{"significant_figures":3,"unit":"lb/in³","value":0.316}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C23000, Physical Properties (printed page 74), row Density at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-b00d5054ccba2effd82d","material_id":"cu-c23000","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":159.22758929917018},"kind":"point","reported":{"significant_figures":2,"unit":"Btu/(ft·hr·°F)","value":92.0}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C23000, Physical Properties (printed page 74), row Thermal conductivity at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-f9a8057458dc3673493b","material_id":"cu-c23000","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":376.812},"kind":"point","reported":{"significant_figures":1,"unit":"Btu/(lb·°F)","value":0.09}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C23000, Physical Properties (printed page 74), row Specific heat at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-f308c46025d87c10b5de","material_id":"cu-c26000","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8525.410650742562},"kind":"point","reported":{"significant_figures":3,"unit":"lb/in³","value":0.308}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C26000, Physical Properties (printed page 74), row Density at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-b2e53c08eb71c6b63643","material_id":"cu-c26000","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":121.15142664067297},"kind":"point","reported":{"significant_figures":2,"unit":"Btu/(ft·hr·°F)","value":70.0}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C26000, Physical Properties (printed page 74), row Thermal conductivity at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-9068f7df024292b00402","material_id":"cu-c26000","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":376.812},"kind":"point","reported":{"significant_figures":1,"unit":"Btu/(lb·°F)","value":0.09}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C26000, Physical Properties (printed page 74), row Specific heat at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-ca83e224ab881e2a358e","material_id":"cu-c28000","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8387.011127191545},"kind":"point","reported":{"significant_figures":3,"unit":"lb/in³","value":0.303}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C28000, Physical Properties (printed page 74), row Density at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-9645c52480def852c12e","material_id":"cu-c28000","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":122.88216130696829},"kind":"point","reported":{"significant_figures":2,"unit":"Btu/(ft·hr·°F)","value":71.0}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C28000, Physical Properties (printed page 74), row Thermal conductivity at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-7925c826ae45dca2910c","material_id":"cu-c28000","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":376.812},"kind":"point","reported":{"significant_figures":1,"unit":"Btu/(lb·°F)","value":0.09}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C28000, Physical Properties (printed page 74), row Specific heat at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-45a2da584083b2fef24b","material_id":"cu-c33000","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8497.73074603236},"kind":"point","reported":{"significant_figures":3,"unit":"lb/in³","value":0.307}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C33000, Physical Properties (printed page 74), row Density at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-ec233a3f72efa76aa10b","material_id":"cu-c33000","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":115.95922264178698},"kind":"point","reported":{"significant_figures":2,"unit":"Btu/(ft·hr·°F)","value":67.0}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C33000, Physical Properties (printed page 74), row Thermal conductivity at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-9108c78ac40a6092abb2","material_id":"cu-c33000","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":376.812},"kind":"point","reported":{"significant_figures":1,"unit":"Btu/(lb·°F)","value":0.09}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C33000, Physical Properties (printed page 74), row Specific heat at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-bdbfb6115ce844a46f74","material_id":"cu-c35300","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8470.050841322156},"kind":"point","reported":{"significant_figures":3,"unit":"lb/in³","value":0.306}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C35300, Physical Properties (printed page 74), row Density at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-b8235e98ac06bc5d072d","material_id":"cu-c35300","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":115.95922264178698},"kind":"point","reported":{"significant_figures":2,"unit":"Btu/(ft·hr·°F)","value":67.0}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C35300, Physical Properties (printed page 74), row Thermal conductivity at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-aefb20cb0ab36851f030","material_id":"cu-c35300","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":376.812},"kind":"point","reported":{"significant_figures":1,"unit":"Btu/(lb·°F)","value":0.09}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C35300, Physical Properties (printed page 74), row Specific heat at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-ff52c8ff246b088db538","material_id":"cu-c36000","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8497.73074603236},"kind":"point","reported":{"significant_figures":3,"unit":"lb/in³","value":0.307}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C36000, Physical Properties (printed page 74), row Density at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-fe4e582bdc31a24f4955","material_id":"cu-c36000","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":115.95922264178698},"kind":"point","reported":{"significant_figures":2,"unit":"Btu/(ft·hr·°F)","value":67.0}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C36000, Physical Properties (printed page 74), row Thermal conductivity at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-c08d3f589a4134c2f45d","material_id":"cu-c36000","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":376.812},"kind":"point","reported":{"significant_figures":1,"unit":"Btu/(lb·°F)","value":0.09}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C36000, Physical Properties (printed page 74), row Specific heat at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-4410642dacf0da480d3d","material_id":"cu-c36500","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8414.691031901748},"kind":"point","reported":{"significant_figures":3,"unit":"lb/in³","value":0.304}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C36500, Physical Properties (printed page 74), row Density at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-a5e7432f0953d2466e76","material_id":"cu-c36500","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":122.88216130696829},"kind":"point","reported":{"significant_figures":2,"unit":"Btu/(ft·hr·°F)","value":71.0}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C36500, Physical Properties (printed page 74), row Thermal conductivity at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-c30f56729d81b13f6d9b","material_id":"cu-c36500","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":376.812},"kind":"point","reported":{"significant_figures":1,"unit":"Btu/(lb·°F)","value":0.09}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C36500, Physical Properties (printed page 74), row Specific heat at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-ee9b788320c482229205","material_id":"cu-c38500","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8470.050841322156},"kind":"point","reported":{"significant_figures":3,"unit":"lb/in³","value":0.306}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C38500, Physical Properties (printed page 74), row Density at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-430d882be4defece4642","material_id":"cu-c38500","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":122.88216130696829},"kind":"point","reported":{"significant_figures":2,"unit":"Btu/(ft·hr·°F)","value":71.0}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C38500, Physical Properties (printed page 74), row Thermal conductivity at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-a7f5d680103d08a8c08e","material_id":"cu-c46400","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8414.691031901748},"kind":"point","reported":{"significant_figures":3,"unit":"lb/in³","value":0.304}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C46400, Physical Properties (printed page 74), row Density at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-43808318ae1ea16981d4","material_id":"cu-c46400","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":115.95922264178698},"kind":"point","reported":{"significant_figures":2,"unit":"Btu/(ft·hr·°F)","value":67.0}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C46400, Physical Properties (printed page 74), row Thermal conductivity at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-72b86e5154eb3de4a96d","material_id":"cu-c46400","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":376.812},"kind":"point","reported":{"significant_figures":1,"unit":"Btu/(lb·°F)","value":0.09}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C46400, Physical Properties (printed page 74), row Specific heat at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-e00a734955fab179316e","material_id":"cu-c48500","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8442.370936611953},"kind":"point","reported":{"significant_figures":3,"unit":"lb/in³","value":0.305}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C48500, Physical Properties (printed page 74), row Density at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-917eaae5389e8ccd357e","material_id":"cu-c48500","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":115.95922264178698},"kind":"point","reported":{"significant_figures":2,"unit":"Btu/(ft·hr·°F)","value":67.0}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C48500, Physical Properties (printed page 74), row Thermal conductivity at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-80c592c3550ae3d36904","material_id":"cu-c48500","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":376.812},"kind":"point","reported":{"significant_figures":1,"unit":"Btu/(lb·°F)","value":0.09}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C48500, Physical Properties (printed page 74), row Specific heat at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-ebdbb58ec08152780880","material_id":"cu-c51000","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8857.569507265},"kind":"point","reported":{"significant_figures":3,"unit":"lb/in³","value":0.32}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C51000, Physical Properties (printed page 74), row Density at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-193bb73fc37bd70d7bbd","material_id":"cu-c51000","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":69.22938665181312},"kind":"point","reported":{"significant_figures":2,"unit":"Btu/(ft·hr·°F)","value":40.0}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C51000, Physical Properties (printed page 74), row Thermal conductivity at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-2122d540e861fbebeba6","material_id":"cu-c51000","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":376.812},"kind":"point","reported":{"significant_figures":1,"unit":"Btu/(lb·°F)","value":0.09}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C51000, Physical Properties (printed page 74), row Specific heat at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-42e448ddcf695e7dff5e","material_id":"cu-c54400","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8885.249411975203},"kind":"point","reported":{"significant_figures":3,"unit":"lb/in³","value":0.321}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C54400, Physical Properties (printed page 74), row Density at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-37306099c272e827063e","material_id":"cu-c54400","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":86.5367333147664},"kind":"point","reported":{"significant_figures":2,"unit":"Btu/(ft·hr·°F)","value":50.0}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C54400, Physical Properties (printed page 74), row Thermal conductivity at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-1cb824d0b21e9409e28a","material_id":"cu-c54400","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":376.812},"kind":"point","reported":{"significant_figures":1,"unit":"Btu/(lb·°F)","value":0.09}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C54400, Physical Properties (printed page 74), row Specific heat at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-545ac789505298ec97e7","material_id":"cu-c64200","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7695.013509436469},"kind":"point","reported":{"significant_figures":3,"unit":"lb/in³","value":0.278}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C64200, Physical Properties (printed page 74), row Density at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-6a3599a07eb4b86d9d7f","material_id":"cu-c64200","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":44.99910132367853},"kind":"point","reported":{"significant_figures":2,"unit":"Btu/(ft·hr·°F)","value":26.0}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C64200, Physical Properties (printed page 74), row Thermal conductivity at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-77aa6febd402dd98bf5f","material_id":"cu-c64200","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":376.812},"kind":"point","reported":{"significant_figures":1,"unit":"Btu/(lb·°F)","value":0.09}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C64200, Physical Properties (printed page 74), row Specific heat at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-29d200c44562682ce185","material_id":"cu-c65500","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8525.410650742562},"kind":"point","reported":{"significant_figures":3,"unit":"lb/in³","value":0.308}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C65500, Physical Properties (printed page 74), row Density at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-4684d545088a39d38913","material_id":"cu-c65500","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":36.34542799220189},"kind":"point","reported":{"significant_figures":2,"unit":"Btu/(ft·hr·°F)","value":21.0}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C65500, Physical Properties (printed page 74), row Thermal conductivity at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-934b4eb4b2940b2934c6","material_id":"cu-c65500","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":376.812},"kind":"point","reported":{"significant_figures":1,"unit":"Btu/(lb·°F)","value":0.09}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C65500, Physical Properties (printed page 74), row Specific heat at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-126e52ffc7d28965a082","material_id":"cu-c71500","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8940.609221395609},"kind":"point","reported":{"significant_figures":3,"unit":"lb/in³","value":0.323}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C71500, Physical Properties (printed page 74), row Density at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-0ead38900e3e681a7d39","material_id":"cu-c71500","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":29.422489327020575},"kind":"point","reported":{"significant_figures":2,"unit":"Btu/(ft·hr·°F)","value":17.0}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C71500, Physical Properties (printed page 74), row Thermal conductivity at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-6ac3661b9a2ce2f484f8","material_id":"cu-c71500","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":376.812},"kind":"point","reported":{"significant_figures":1,"unit":"Btu/(lb·°F)","value":0.09}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C71500, Physical Properties (printed page 74), row Specific heat at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-aac2aae874a6772a8c3d","material_id":"cu-c75200","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":8746.849888424187},"kind":"point","reported":{"significant_figures":3,"unit":"lb/in³","value":0.316}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C75200, Physical Properties (printed page 74), row Density at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-32b8fb87905dc9054ead","material_id":"cu-c75200","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":32.88395865961123},"kind":"point","reported":{"significant_figures":2,"unit":"Btu/(ft·hr·°F)","value":19.0}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C75200, Physical Properties (printed page 74), row Thermal conductivity at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-dfb8569ab795de660e5d","material_id":"cu-c75200","notes":"Supplier reference values; not design allowables. Mechanical temper not specified.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":376.812},"kind":"point","reported":{"significant_figures":1,"unit":"Btu/(lb·°F)","value":0.09}},"source_id":"copper-alloys-guide","source_locator":{"label":"Page 76, C75200, Physical Properties (printed page 74), row Specific heat at 68 °F","page":76},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Supplier physical-property reference; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":295.15},"id":"obs-06d20d1f79f02be2c025","material_id":"ti-6al-4v","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":4420.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":4.42}},"source_id":"timet-6-4","source_locator":{"label":"Page 1, Titanium Ti-6Al-4V, row Table 2, density at 22 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"TIMET physical-property table; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-85023a0091923ebb7fe9","material_id":"ti-6al-4v","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":580.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(g·K)","value":0.58}},"source_id":"timet-6-4","source_locator":{"label":"Page 1, Titanium Ti-6Al-4V, row Table 2, specific_heat at 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"TIMET physical-property table; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":698.15},"id":"obs-5416113309741bb3bebe","material_id":"ti-6al-4v","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":670.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(g·K)","value":0.67}},"source_id":"timet-6-4","source_locator":{"label":"Page 1, Titanium Ti-6Al-4V, row Table 2, specific_heat at 425 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"TIMET physical-property table; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":1143.15},"id":"obs-ed78d239be388343edb6","material_id":"ti-6al-4v","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":930.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(g·K)","value":0.93}},"source_id":"timet-6-4","source_locator":{"label":"Page 1, Titanium Ti-6Al-4V, row Table 2, specific_heat at 870 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"TIMET physical-property table; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-a03ae6e7dbe5ee90375d","material_id":"ti-6al-4v","notes":"Depends on texture and heat treatment; Table 2.","property_id":"youngs_modulus","result":{"canonical":{"maximum":122000000000.0,"minimum":107000000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":122.0,"minimum":107.0,"significant_figures":3,"unit":"GPa"}},"source_id":"timet-6-4","source_locator":{"label":"Page 1, Titanium Ti-6Al-4V, row Table 2, youngs_modulus at 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"TIMET physical-property table; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":503.15},"id":"obs-f65244a4a63a361ce643","material_id":"ti-6al-4v","notes":"Depends on texture and heat treatment; Table 2.","property_id":"youngs_modulus","result":{"canonical":{"maximum":111000000000.0,"minimum":95000000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":111.0,"minimum":95.0,"significant_figures":2,"unit":"GPa"}},"source_id":"timet-6-4","source_locator":{"label":"Page 1, Titanium Ti-6Al-4V, row Table 2, youngs_modulus at 230 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"TIMET physical-property table; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-8e0abf8ddb14aef6e207","material_id":"ti-6al-4v","notes":"","property_id":"poissons_ratio","result":{"canonical":{"unit":"1","value":0.31},"kind":"point","reported":{"significant_figures":2,"unit":"1","value":0.31}},"source_id":"timet-6-4","source_locator":{"label":"Page 1, Titanium Ti-6Al-4V, row Table 2, poissons_ratio at 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"TIMET physical-property table; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-6e3bddbbb22fab1f701d","material_id":"ti-6al-4v","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":6.6},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·K)","value":6.6}},"source_id":"timet-6-4","source_locator":{"label":"Page 1, Ti-6Al-4V, mill annealed, row Table 2, thermal conductivity at 20 °C","page":1},"state_id":"ti-6al-4v-mill-annealed","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"TIMET physical-property table; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":588.15},"id":"obs-7d5c06aa2edb3439ccf5","material_id":"ti-6al-4v","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":10.6},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":10.6}},"source_id":"timet-6-4","source_locator":{"label":"Page 1, Ti-6Al-4V, mill annealed, row Table 2, thermal conductivity at 315 °C","page":1},"state_id":"ti-6al-4v-mill-annealed","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"TIMET physical-property table; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":923.15},"id":"obs-8dbf40d5913369f8b7ad","material_id":"ti-6al-4v","notes":"","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":17.5},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·K)","value":17.5}},"source_id":"timet-6-4","source_locator":{"label":"Page 1, Ti-6Al-4V, mill annealed, row Table 2, thermal conductivity at 650 °C","page":1},"state_id":"ti-6al-4v-mill-annealed","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"TIMET physical-property table; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":295.15},"id":"obs-be97bbb56573616f9931","material_id":"ti-6al-2sn-4zr-6mo","notes":"","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":4640.0},"kind":"point","reported":{"significant_figures":3,"unit":"g/cm³","value":4.64}},"source_id":"timet-6246","source_locator":{"label":"Page 1, Titanium Ti-6Al-2Sn-4Zr-6Mo, row Table 2, density at 22 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"TIMET physical-property table; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{},"id":"obs-cd320ea3aad47771e77d","material_id":"ti-6al-2sn-4zr-6mo","notes":"","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":502.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·K)","value":502.0}},"source_id":"timet-6246","source_locator":{"label":"Page 1, Titanium Ti-6Al-2Sn-4Zr-6Mo, row Table 2, specific_heat","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"TIMET physical-property table; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-b496b2e6d1882b41158c","material_id":"ti-6al-2sn-4zr-6mo","notes":"Depends on texture and heat treatment; Table 2.","property_id":"youngs_modulus","result":{"canonical":{"maximum":114000000000.0,"minimum":70000000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":114.0,"minimum":70.0,"significant_figures":2,"unit":"GPa"}},"source_id":"timet-6246","source_locator":{"label":"Page 1, Titanium Ti-6Al-2Sn-4Zr-6Mo, row Table 2, youngs_modulus at 20 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"TIMET physical-property table; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":588.15},"id":"obs-165eab81f7e16742199d","material_id":"ti-6al-2sn-4zr-6mo","notes":"Depends on texture and heat treatment; Table 2.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":107000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":107.0}},"source_id":"timet-6246","source_locator":{"label":"Page 1, Titanium Ti-6Al-2Sn-4Zr-6Mo, row Table 2, youngs_modulus at 315 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"TIMET physical-property table; test method not stated"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":698.15},"id":"obs-7f73b4110901d5ce80f2","material_id":"ti-6al-2sn-4zr-6mo","notes":"Depends on texture and heat treatment; Table 2.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":100000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"GPa","value":100.0}},"source_id":"timet-6246","source_locator":{"label":"Page 1, Titanium Ti-6Al-2Sn-4Zr-6Mo, row Table 2, youngs_modulus at 425 °C","page":1},"state_id":null,"status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"TIMET physical-property table; test method not stated"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":293.15},"id":"obs-4f730127151e0413b47f","material_id":"ti-6al-2sn-4zr-6mo","notes":"Rod diameter or thickness ≤2.00 in. Applies in any grain direction. Heat treatment: 870–900 °C for 1 h, air cool; 540–593 °C for 8 h, air cool.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":1103000000.0},"kind":"lower_bound","reported":{"significant_figures":4,"unit":"MPa","value":1103.0}},"source_id":"timet-6246","source_locator":{"label":"Page 1, TIMETAL 6-2-4-6, DA, rod diameter or thickness ≤2.00 in, row Table 3, UTS","page":1},"state_id":"ti-6246-da","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Mil T-9047G (TIMET Table 3)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":293.15},"id":"obs-b26340059434da7b8a00","material_id":"ti-6al-2sn-4zr-6mo","notes":"Rod diameter or thickness ≤2.00 in. Applies in any grain direction. Heat treatment: 870–900 °C for 1 h, air cool; 540–593 °C for 8 h, air cool.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":1034000000.0},"kind":"lower_bound","reported":{"significant_figures":4,"unit":"MPa","value":1034.0}},"source_id":"timet-6246","source_locator":{"label":"Page 1, TIMETAL 6-2-4-6, DA, rod diameter or thickness ≤2.00 in, row Table 3, 0.2% yield strength","page":1},"state_id":"ti-6246-da","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Mil T-9047G (TIMET Table 3)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":293.15},"id":"obs-cbdae8f917dde5d0c404","material_id":"ti-6al-2sn-4zr-6mo","notes":"Rod diameter or thickness ≤2.00 in. Applies in any grain direction. Heat treatment: 870–900 °C for 1 h, air cool; 540–593 °C for 8 h, air cool.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.1},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":10.0}},"source_id":"timet-6246","source_locator":{"label":"Page 1, TIMETAL 6-2-4-6, DA, rod diameter or thickness ≤2.00 in, row Table 3, Elongation","page":1},"state_id":"ti-6246-da","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Mil T-9047G (TIMET Table 3)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":293.15},"id":"obs-6e78361197e3ab7a19c1","material_id":"ti-6al-2sn-4zr-6mo","notes":"Rod diameter or thickness ≤2.50 in. Applies in any grain direction. Heat treatment: 870–925 °C for 2–90 min, water quench or air cool; 480–675 °C for 4–8 h.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":1172000000.0},"kind":"lower_bound","reported":{"significant_figures":4,"unit":"MPa","value":1172.0}},"source_id":"timet-6246","source_locator":{"label":"Page 1, TIMETAL 6-2-4-6, STA, rod diameter or thickness ≤2.50 in, row Table 3, UTS","page":1},"state_id":"ti-6246-sta","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Mil T-9047G (TIMET Table 3)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":293.15},"id":"obs-6a31778f8efc4315e669","material_id":"ti-6al-2sn-4zr-6mo","notes":"Rod diameter or thickness ≤2.50 in. Applies in any grain direction. Heat treatment: 870–925 °C for 2–90 min, water quench or air cool; 480–675 °C for 4–8 h.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":1103000000.0},"kind":"lower_bound","reported":{"significant_figures":4,"unit":"MPa","value":1103.0}},"source_id":"timet-6246","source_locator":{"label":"Page 1, TIMETAL 6-2-4-6, STA, rod diameter or thickness ≤2.50 in, row Table 3, 0.2% yield strength","page":1},"state_id":"ti-6246-sta","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Mil T-9047G (TIMET Table 3)"},"uncertainty":null},{"basis":"minimum","conditions":{"temperature_K":293.15},"id":"obs-085dcba9490fc31057e9","material_id":"ti-6al-2sn-4zr-6mo","notes":"Rod diameter or thickness ≤2.50 in. Applies in any grain direction. Heat treatment: 870–925 °C for 2–90 min, water quench or air cool; 480–675 °C for 4–8 h.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.1},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":10.0}},"source_id":"timet-6246","source_locator":{"label":"Page 1, TIMETAL 6-2-4-6, STA, rod diameter or thickness ≤2.50 in, row Table 3, Elongation","page":1},"state_id":"ti-6246-sta","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Mil T-9047G (TIMET Table 3)"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-e7dd0baf35586ae3ed13","material_id":"steel-atlas-m1020","notes":"Bar diameter ≤16 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":480000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":480.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 31, Atlas M1020, Bar diameter ≤16 mm, row 4.1.4, Tensile strength, printed min","page":31},"state_id":"steel-atlas-m1020-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.1.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-e108fed711d391ba4868","material_id":"steel-atlas-m1020","notes":"Bar diameter ≤16 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":380000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":380.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 31, Atlas M1020, Bar diameter ≤16 mm, row 4.1.4, Yield stress, printed min","page":31},"state_id":"steel-atlas-m1020-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.1.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-14c95c1c63d22dc322da","material_id":"steel-atlas-m1020","notes":"Bar diameter ≤16 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.12},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":12.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 31, Atlas M1020, Bar diameter ≤16 mm, row 4.1.4, Elongation in 50 mm, printed min","page":31},"state_id":"steel-atlas-m1020-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.1.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-b09d466a1aa19479ea1c","material_id":"steel-atlas-m1020","notes":"Bar diameter >16 to ≤38 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":460000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":460.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 31, Atlas M1020, Bar diameter >16 to ≤38 mm, row 4.1.4, Tensile strength, printed min","page":31},"state_id":"steel-atlas-m1020-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.1.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-86a03871f5b1ad1936d9","material_id":"steel-atlas-m1020","notes":"Bar diameter >16 to ≤38 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":370000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":370.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 31, Atlas M1020, Bar diameter >16 to ≤38 mm, row 4.1.4, Yield stress, printed min","page":31},"state_id":"steel-atlas-m1020-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.1.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-a19e28f66ea63a5f3210","material_id":"steel-atlas-m1020","notes":"Bar diameter >16 to ≤38 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.12},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":12.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 31, Atlas M1020, Bar diameter >16 to ≤38 mm, row 4.1.4, Elongation in 50 mm, printed min","page":31},"state_id":"steel-atlas-m1020-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.1.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-c7eb525f8507c9c1e7f7","material_id":"steel-atlas-m1020","notes":"Bar diameter >38 to ≤100 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":430000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":430.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 31, Atlas M1020, Bar diameter >38 to ≤100 mm, row 4.1.4, Tensile strength, printed min","page":31},"state_id":"steel-atlas-m1020-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.1.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-0c7866bf14f2b084f6a7","material_id":"steel-atlas-m1020","notes":"Bar diameter >38 to ≤100 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":340000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":340.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 31, Atlas M1020, Bar diameter >38 to ≤100 mm, row 4.1.4, Yield stress, printed min","page":31},"state_id":"steel-atlas-m1020-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.1.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-0123b4a4750246be37fa","material_id":"steel-atlas-m1020","notes":"Bar diameter >38 to ≤100 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.13},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":13.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 31, Atlas M1020, Bar diameter >38 to ≤100 mm, row 4.1.4, Elongation in 50 mm, printed min","page":31},"state_id":"steel-atlas-m1020-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.1.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-fd14c9f4e8bc763c7a83","material_id":"steel-atlas-m1030","notes":"Bar diameter ≤16 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":560000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":560.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 33, Atlas M1030, Bar diameter ≤16 mm, row 4.2.4, Tensile strength, printed min","page":33},"state_id":"steel-atlas-m1030-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.2.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-3af4a107916c6c204ebb","material_id":"steel-atlas-m1030","notes":"Bar diameter ≤16 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":440000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":440.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 33, Atlas M1030, Bar diameter ≤16 mm, row 4.2.4, Yield stress, printed min","page":33},"state_id":"steel-atlas-m1030-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.2.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-c89e3b122d3ddceec287","material_id":"steel-atlas-m1030","notes":"Bar diameter ≤16 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.1},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":10.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 33, Atlas M1030, Bar diameter ≤16 mm, row 4.2.4, Elongation in 50 mm, printed min","page":33},"state_id":"steel-atlas-m1030-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.2.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-c7392949dc240286c92b","material_id":"steel-atlas-m1030","notes":"Bar diameter >16 to ≤38 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":540000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":540.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 33, Atlas M1030, Bar diameter >16 to ≤38 mm, row 4.2.4, Tensile strength, printed min","page":33},"state_id":"steel-atlas-m1030-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.2.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-8e528edf306c7135ae75","material_id":"steel-atlas-m1030","notes":"Bar diameter >16 to ≤38 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":430000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":430.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 33, Atlas M1030, Bar diameter >16 to ≤38 mm, row 4.2.4, Yield stress, printed min","page":33},"state_id":"steel-atlas-m1030-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.2.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-744cf85124fa156a2f30","material_id":"steel-atlas-m1030","notes":"Bar diameter >16 to ≤38 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.11},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":11.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 33, Atlas M1030, Bar diameter >16 to ≤38 mm, row 4.2.4, Elongation in 50 mm, printed min","page":33},"state_id":"steel-atlas-m1030-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.2.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-e7ea0fcff9a222538d6d","material_id":"steel-atlas-m1030","notes":"Bar diameter >38 to ≤100 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":520000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":520.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 33, Atlas M1030, Bar diameter >38 to ≤100 mm, row 4.2.4, Tensile strength, printed min","page":33},"state_id":"steel-atlas-m1030-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.2.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-897aaaafc49ca4aa2c24","material_id":"steel-atlas-m1030","notes":"Bar diameter >38 to ≤100 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":410000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":410.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 33, Atlas M1030, Bar diameter >38 to ≤100 mm, row 4.2.4, Yield stress, printed min","page":33},"state_id":"steel-atlas-m1030-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.2.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-d7dc72bb66dd950e8f7d","material_id":"steel-atlas-m1030","notes":"Bar diameter >38 to ≤100 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.12},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":12.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 33, Atlas M1030, Bar diameter >38 to ≤100 mm, row 4.2.4, Elongation in 50 mm, printed min","page":33},"state_id":"steel-atlas-m1030-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.2.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-9a5c97dead54523dd75b","material_id":"steel-atlas-1045","notes":"Bar diameter ≤16 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":690000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":690.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 35, Atlas 1045, Bar diameter ≤16 mm, row 4.3.4, Tensile strength, printed min","page":35},"state_id":"steel-atlas-1045-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.3.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-fb96591f22e13033ac72","material_id":"steel-atlas-1045","notes":"Bar diameter ≤16 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":540000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":540.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 35, Atlas 1045, Bar diameter ≤16 mm, row 4.3.4, Yield stress, printed min","page":35},"state_id":"steel-atlas-1045-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.3.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-3e759f2958cca79e561a","material_id":"steel-atlas-1045","notes":"Bar diameter ≤16 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.08},"kind":"lower_bound","reported":{"significant_figures":1,"unit":"%","value":8.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 35, Atlas 1045, Bar diameter ≤16 mm, row 4.3.4, Elongation in 50 mm, printed min","page":35},"state_id":"steel-atlas-1045-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.3.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-7804cb212c9c82c1b12c","material_id":"steel-atlas-1045","notes":"Bar diameter >16 to ≤38 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":650000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":650.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 35, Atlas 1045, Bar diameter >16 to ≤38 mm, row 4.3.4, Tensile strength, printed min","page":35},"state_id":"steel-atlas-1045-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.3.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-f4bc6f775cb778da3e19","material_id":"steel-atlas-1045","notes":"Bar diameter >16 to ≤38 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":510000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":510.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 35, Atlas 1045, Bar diameter >16 to ≤38 mm, row 4.3.4, Yield stress, printed min","page":35},"state_id":"steel-atlas-1045-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.3.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-c6035ae524f6977ce806","material_id":"steel-atlas-1045","notes":"Bar diameter >16 to ≤38 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.08},"kind":"lower_bound","reported":{"significant_figures":1,"unit":"%","value":8.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 35, Atlas 1045, Bar diameter >16 to ≤38 mm, row 4.3.4, Elongation in 50 mm, printed min","page":35},"state_id":"steel-atlas-1045-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.3.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-3b8fe34082dc6a1fd29f","material_id":"steel-atlas-1045","notes":"Bar diameter >38 to ≤80 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":640000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":640.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 35, Atlas 1045, Bar diameter >38 to ≤80 mm, row 4.3.4, Tensile strength, printed min","page":35},"state_id":"steel-atlas-1045-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.3.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-84abc4194648453754b2","material_id":"steel-atlas-1045","notes":"Bar diameter >38 to ≤80 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":500000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":500.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 35, Atlas 1045, Bar diameter >38 to ≤80 mm, row 4.3.4, Yield stress, printed min","page":35},"state_id":"steel-atlas-1045-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.3.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-ba2965b2f5a3799e9dee","material_id":"steel-atlas-1045","notes":"Bar diameter >38 to ≤80 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.09},"kind":"lower_bound","reported":{"significant_figures":1,"unit":"%","value":9.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 35, Atlas 1045, Bar diameter >38 to ≤80 mm, row 4.3.4, Elongation in 50 mm, printed min","page":35},"state_id":"steel-atlas-1045-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.3.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-9399db0955ebd775d242","material_id":"steel-atlas-1214fm","notes":"Bar diameter ≤16 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":480000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":480.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 38, Atlas 1214FM, Bar diameter ≤16 mm, row 4.4.4, Tensile strength, printed min","page":38},"state_id":"steel-atlas-1214fm-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.4.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-46c7cd982c0221af4484","material_id":"steel-atlas-1214fm","notes":"Bar diameter ≤16 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":350000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":350.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 38, Atlas 1214FM, Bar diameter ≤16 mm, row 4.4.4, Yield stress, printed min","page":38},"state_id":"steel-atlas-1214fm-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.4.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-7c638d352729283a6af5","material_id":"steel-atlas-1214fm","notes":"Bar diameter ≤16 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.07},"kind":"lower_bound","reported":{"significant_figures":1,"unit":"%","value":7.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 38, Atlas 1214FM, Bar diameter ≤16 mm, row 4.4.4, Elongation in 50 mm, printed min","page":38},"state_id":"steel-atlas-1214fm-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.4.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-a09093a455a1fda8e07a","material_id":"steel-atlas-1214fm","notes":"Bar diameter >16 to ≤38 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":430000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":430.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 38, Atlas 1214FM, Bar diameter >16 to ≤38 mm, row 4.4.4, Tensile strength, printed min","page":38},"state_id":"steel-atlas-1214fm-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.4.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-3c6d02317083d83c8900","material_id":"steel-atlas-1214fm","notes":"Bar diameter >16 to ≤38 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":330000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":330.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 38, Atlas 1214FM, Bar diameter >16 to ≤38 mm, row 4.4.4, Yield stress, printed min","page":38},"state_id":"steel-atlas-1214fm-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.4.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-85817751852a1f149598","material_id":"steel-atlas-1214fm","notes":"Bar diameter >16 to ≤38 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.08},"kind":"lower_bound","reported":{"significant_figures":1,"unit":"%","value":8.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 38, Atlas 1214FM, Bar diameter >16 to ≤38 mm, row 4.4.4, Elongation in 50 mm, printed min","page":38},"state_id":"steel-atlas-1214fm-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.4.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-a3f2439ddf152a35ce6f","material_id":"steel-atlas-1214fm","notes":"Bar diameter >38 to ≤100 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":400000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":400.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 38, Atlas 1214FM, Bar diameter >38 to ≤100 mm, row 4.4.4, Tensile strength, printed min","page":38},"state_id":"steel-atlas-1214fm-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.4.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-b9e01a3db5269ed636c1","material_id":"steel-atlas-1214fm","notes":"Bar diameter >38 to ≤100 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":290000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":290.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 38, Atlas 1214FM, Bar diameter >38 to ≤100 mm, row 4.4.4, Yield stress, printed min","page":38},"state_id":"steel-atlas-1214fm-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.4.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-4f8ac1397ee9421b521b","material_id":"steel-atlas-1214fm","notes":"Bar diameter >38 to ≤100 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.09},"kind":"lower_bound","reported":{"significant_figures":1,"unit":"%","value":9.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 38, Atlas 1214FM, Bar diameter >38 to ≤100 mm, row 4.4.4, Elongation in 50 mm, printed min","page":38},"state_id":"steel-atlas-1214fm-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.4.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-97bda4c0370410bf69bf","material_id":"steel-atlas-12l14fm","notes":"Bar diameter ≤16 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":480000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":480.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 40, Atlas 12L14FM, Bar diameter ≤16 mm, row 4.5.4, Tensile strength, printed min","page":40},"state_id":"steel-atlas-12l14fm-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.5.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-5881d20558bd8b16e15c","material_id":"steel-atlas-12l14fm","notes":"Bar diameter ≤16 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":350000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":350.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 40, Atlas 12L14FM, Bar diameter ≤16 mm, row 4.5.4, Yield stress, printed min","page":40},"state_id":"steel-atlas-12l14fm-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.5.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-c78f14567325e2c61df9","material_id":"steel-atlas-12l14fm","notes":"Bar diameter ≤16 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.07},"kind":"lower_bound","reported":{"significant_figures":1,"unit":"%","value":7.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 40, Atlas 12L14FM, Bar diameter ≤16 mm, row 4.5.4, Elongation in 50 mm, printed min","page":40},"state_id":"steel-atlas-12l14fm-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.5.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-69a3a8ba4aa7c4fe44ac","material_id":"steel-atlas-12l14fm","notes":"Bar diameter >16 to ≤38 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":430000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":430.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 40, Atlas 12L14FM, Bar diameter >16 to ≤38 mm, row 4.5.4, Tensile strength, printed min","page":40},"state_id":"steel-atlas-12l14fm-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.5.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-1c0c592f43e63378204e","material_id":"steel-atlas-12l14fm","notes":"Bar diameter >16 to ≤38 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":330000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":330.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 40, Atlas 12L14FM, Bar diameter >16 to ≤38 mm, row 4.5.4, Yield stress, printed min","page":40},"state_id":"steel-atlas-12l14fm-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.5.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-50fd546de83bbfe90964","material_id":"steel-atlas-12l14fm","notes":"Bar diameter >16 to ≤38 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.08},"kind":"lower_bound","reported":{"significant_figures":1,"unit":"%","value":8.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 40, Atlas 12L14FM, Bar diameter >16 to ≤38 mm, row 4.5.4, Elongation in 50 mm, printed min","page":40},"state_id":"steel-atlas-12l14fm-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.5.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-c043e7bd12e1afb9d6b8","material_id":"steel-atlas-12l14fm","notes":"Bar diameter >38 to ≤100 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":400000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":400.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 40, Atlas 12L14FM, Bar diameter >38 to ≤100 mm, row 4.5.4, Tensile strength, printed min","page":40},"state_id":"steel-atlas-12l14fm-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.5.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-f5a903e7edee389a4035","material_id":"steel-atlas-12l14fm","notes":"Bar diameter >38 to ≤100 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":290000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":290.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 40, Atlas 12L14FM, Bar diameter >38 to ≤100 mm, row 4.5.4, Yield stress, printed min","page":40},"state_id":"steel-atlas-12l14fm-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.5.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-26a2720148a8482d575e","material_id":"steel-atlas-12l14fm","notes":"Bar diameter >38 to ≤100 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. Cold drawn. The source does not define the yield offset.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.09},"kind":"lower_bound","reported":{"significant_figures":1,"unit":"%","value":9.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 40, Atlas 12L14FM, Bar diameter >38 to ≤100 mm, row 4.5.4, Elongation in 50 mm, printed min","page":40},"state_id":"steel-atlas-12l14fm-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.5.4"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"bar"},"id":"obs-55f2ad9a3ba86c8b72a3","material_id":"steel-atlas-4140","notes":"Bar diameter ≤180 mm; AS1444 condition U.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":1080000000.0,"minimum":930000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":1080.0,"minimum":930.0,"significant_figures":3,"unit":"MPa"}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 42, Atlas 4140, Bar diameter ≤180 mm; AS1444 condition U, row 4.6.4, Tensile strength","page":42},"state_id":"steel-atlas-4140-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.6.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-43e1a99003455fdaf83f","material_id":"steel-atlas-4140","notes":"Bar diameter ≤180 mm; AS1444 condition U.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":740000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":740.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 42, Atlas 4140, Bar diameter ≤180 mm; AS1444 condition U, row 4.6.4, 0.2% proof stress, printed min","page":42},"state_id":"steel-atlas-4140-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.6.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-e5ba75efc6853cce9e0e","material_id":"steel-atlas-4140","notes":"Bar diameter ≤180 mm; AS1444 condition U.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.12},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":12.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 42, Atlas 4140, Bar diameter ≤180 mm; AS1444 condition U, row 4.6.4, Elongation in 50 mm, printed min","page":42},"state_id":"steel-atlas-4140-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.6.4"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"bar"},"id":"obs-70969a2ed8bbdc200fde","material_id":"steel-atlas-4140","notes":"Bar diameter >180 to ≤250 mm; AS1444 condition T.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":1000000000.0,"minimum":850000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":1000.0,"minimum":850.0,"significant_figures":3,"unit":"MPa"}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 42, Atlas 4140, Bar diameter >180 to ≤250 mm; AS1444 condition T, row 4.6.4, Tensile strength","page":42},"state_id":"steel-atlas-4140-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.6.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-3beac6d17195a28aac09","material_id":"steel-atlas-4140","notes":"Bar diameter >180 to ≤250 mm; AS1444 condition T.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":665000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":665.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 42, Atlas 4140, Bar diameter >180 to ≤250 mm; AS1444 condition T, row 4.6.4, 0.2% proof stress, printed min","page":42},"state_id":"steel-atlas-4140-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.6.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-1e231555cebdb8422f08","material_id":"steel-atlas-4140","notes":"Bar diameter >180 to ≤250 mm; AS1444 condition T.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.13},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":13.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 42, Atlas 4140, Bar diameter >180 to ≤250 mm; AS1444 condition T, row 4.6.4, Elongation in 50 mm, printed min","page":42},"state_id":"steel-atlas-4140-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.6.4"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"bar"},"id":"obs-7cfce8c7455f0edafbc0","material_id":"steel-atlas-4140","notes":"Bar diameter >250 to ≤450 mm; AS1444 condition T.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":1000000000.0,"minimum":850000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":1000.0,"minimum":850.0,"significant_figures":3,"unit":"MPa"}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 42, Atlas 4140, Bar diameter >250 to ≤450 mm; AS1444 condition T, row 4.6.4, Tensile strength","page":42},"state_id":"steel-atlas-4140-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.6.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-1d0ce2e6796c6f2b0b8e","material_id":"steel-atlas-4140","notes":"Bar diameter >250 to ≤450 mm; AS1444 condition T.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":665000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":665.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 42, Atlas 4140, Bar diameter >250 to ≤450 mm; AS1444 condition T, row 4.6.4, 0.2% proof stress, printed min","page":42},"state_id":"steel-atlas-4140-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.6.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-b2823bc35a1e5d1a86f7","material_id":"steel-atlas-4140","notes":"Bar diameter >250 to ≤450 mm; AS1444 condition T.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.13},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":13.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 42, Atlas 4140, Bar diameter >250 to ≤450 mm; AS1444 condition T, row 4.6.4, Elongation in 50 mm, printed min","page":42},"state_id":"steel-atlas-4140-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.6.4"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"bar"},"id":"obs-920bba4b32e84bf5b287","material_id":"steel-atlas-6582","notes":"Bar diameter ≤40 mm.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":1300000000.0,"minimum":1100000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":1300.0,"minimum":1100.0,"significant_figures":4,"unit":"MPa"}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 45, Atlas 6582, Bar diameter ≤40 mm, row 4.7.4, Tensile strength","page":45},"state_id":"steel-atlas-6582-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.7.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-049eb792cc4fd2bd799b","material_id":"steel-atlas-6582","notes":"Bar diameter ≤40 mm.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":900000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":900.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 45, Atlas 6582, Bar diameter ≤40 mm, row 4.7.4, 0.2% proof stress, printed min","page":45},"state_id":"steel-atlas-6582-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.7.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-e23ca074f3509bc189ca","material_id":"steel-atlas-6582","notes":"Bar diameter ≤40 mm.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.1},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":10.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 45, Atlas 6582, Bar diameter ≤40 mm, row 4.7.4, Elongation A%, printed min","page":45},"state_id":"steel-atlas-6582-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.7.4"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"bar"},"id":"obs-297f5aeebc65a9307e6c","material_id":"steel-atlas-6582","notes":"Bar diameter >40 to ≤100 mm.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":1200000000.0,"minimum":1000000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":1200.0,"minimum":1000.0,"significant_figures":4,"unit":"MPa"}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 45, Atlas 6582, Bar diameter >40 to ≤100 mm, row 4.7.4, Tensile strength","page":45},"state_id":"steel-atlas-6582-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.7.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-17ed632e9a8b16a2cbf5","material_id":"steel-atlas-6582","notes":"Bar diameter >40 to ≤100 mm.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":800000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":800.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 45, Atlas 6582, Bar diameter >40 to ≤100 mm, row 4.7.4, 0.2% proof stress, printed min","page":45},"state_id":"steel-atlas-6582-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.7.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-e386710d0059410c798b","material_id":"steel-atlas-6582","notes":"Bar diameter >40 to ≤100 mm.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.11},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":11.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 45, Atlas 6582, Bar diameter >40 to ≤100 mm, row 4.7.4, Elongation A%, printed min","page":45},"state_id":"steel-atlas-6582-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.7.4"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"bar"},"id":"obs-232ccbc2027c1b9b05a2","material_id":"steel-atlas-6582","notes":"Bar diameter >100 to ≤160 mm.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":1100000000.0,"minimum":900000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":1100.0,"minimum":900.0,"significant_figures":3,"unit":"MPa"}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 45, Atlas 6582, Bar diameter >100 to ≤160 mm, row 4.7.4, Tensile strength","page":45},"state_id":"steel-atlas-6582-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.7.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-3fe8e995947a5cbc58c7","material_id":"steel-atlas-6582","notes":"Bar diameter >100 to ≤160 mm.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":700000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":700.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 45, Atlas 6582, Bar diameter >100 to ≤160 mm, row 4.7.4, 0.2% proof stress, printed min","page":45},"state_id":"steel-atlas-6582-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.7.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-b0dc7b3ebeb9d51690ec","material_id":"steel-atlas-6582","notes":"Bar diameter >100 to ≤160 mm.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.12},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":12.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 45, Atlas 6582, Bar diameter >100 to ≤160 mm, row 4.7.4, Elongation A%, printed min","page":45},"state_id":"steel-atlas-6582-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.7.4"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"bar"},"id":"obs-4d06ac9ee3b7db3e5c46","material_id":"steel-atlas-6582","notes":"Bar diameter >160 to ≤250 mm.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":950000000.0,"minimum":800000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":950.0,"minimum":800.0,"significant_figures":3,"unit":"MPa"}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 45, Atlas 6582, Bar diameter >160 to ≤250 mm, row 4.7.4, Tensile strength","page":45},"state_id":"steel-atlas-6582-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.7.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-c6de3ecdbd0844e6d451","material_id":"steel-atlas-6582","notes":"Bar diameter >160 to ≤250 mm.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":600000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":600.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 45, Atlas 6582, Bar diameter >160 to ≤250 mm, row 4.7.4, 0.2% proof stress, printed min","page":45},"state_id":"steel-atlas-6582-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.7.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-2fa283f7e3b569977439","material_id":"steel-atlas-6582","notes":"Bar diameter >160 to ≤250 mm.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.13},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":13.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 45, Atlas 6582, Bar diameter >160 to ≤250 mm, row 4.7.4, Elongation A%, printed min","page":45},"state_id":"steel-atlas-6582-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.7.4"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"bar"},"id":"obs-779e01f7294fd0a5eadd","material_id":"steel-atlas-6582","notes":"Bar diameter >250 to ≤500 mm.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":900000000.0,"minimum":750000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":900.0,"minimum":750.0,"significant_figures":3,"unit":"MPa"}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 45, Atlas 6582, Bar diameter >250 to ≤500 mm, row 4.7.4, Tensile strength","page":45},"state_id":"steel-atlas-6582-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.7.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-e377929223993c279eea","material_id":"steel-atlas-6582","notes":"Bar diameter >250 to ≤500 mm.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":540000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":540.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 45, Atlas 6582, Bar diameter >250 to ≤500 mm, row 4.7.4, 0.2% proof stress, printed min","page":45},"state_id":"steel-atlas-6582-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.7.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-28bec869103328073e23","material_id":"steel-atlas-6582","notes":"Bar diameter >250 to ≤500 mm.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.14},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":14.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 45, Atlas 6582, Bar diameter >250 to ≤500 mm, row 4.7.4, Elongation A%, printed min","page":45},"state_id":"steel-atlas-6582-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.7.4"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"bar"},"id":"obs-62d459b881a28211ec71","material_id":"steel-atlas-4340","notes":"Bar diameter ≤60 mm.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":1150000000.0,"minimum":1000000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":1150.0,"minimum":1000.0,"significant_figures":4,"unit":"MPa"}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 48, Atlas 4340, Bar diameter ≤60 mm, row 4.8.4, Tensile strength","page":48},"state_id":"steel-atlas-4340-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.8.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-30ac7d4ad0465e90e84e","material_id":"steel-atlas-4340","notes":"Bar diameter ≤60 mm.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":835000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":835.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 48, Atlas 4340, Bar diameter ≤60 mm, row 4.8.4, 0.2% proof stress, printed min","page":48},"state_id":"steel-atlas-4340-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.8.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-ec345e386c4a5156a84d","material_id":"steel-atlas-4340","notes":"Bar diameter ≤60 mm.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.12},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":12.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 48, Atlas 4340, Bar diameter ≤60 mm, row 4.8.4, Elongation A%, printed min","page":48},"state_id":"steel-atlas-4340-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.8.4"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"bar"},"id":"obs-f46ede37ea44a658d3ae","material_id":"steel-atlas-4340","notes":"Bar diameter >60 to ≤100 mm.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":1080000000.0,"minimum":930000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":1080.0,"minimum":930.0,"significant_figures":3,"unit":"MPa"}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 48, Atlas 4340, Bar diameter >60 to ≤100 mm, row 4.8.4, Tensile strength","page":48},"state_id":"steel-atlas-4340-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.8.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-5e0454cbebda2d6ebff8","material_id":"steel-atlas-4340","notes":"Bar diameter >60 to ≤100 mm.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":740000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":740.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 48, Atlas 4340, Bar diameter >60 to ≤100 mm, row 4.8.4, 0.2% proof stress, printed min","page":48},"state_id":"steel-atlas-4340-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.8.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-6e0df2154c1d804a6fde","material_id":"steel-atlas-4340","notes":"Bar diameter >60 to ≤100 mm.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.12},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":12.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 48, Atlas 4340, Bar diameter >60 to ≤100 mm, row 4.8.4, Elongation A%, printed min","page":48},"state_id":"steel-atlas-4340-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.8.4"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"bar"},"id":"obs-db743f7cb0b748d5861d","material_id":"steel-atlas-4340","notes":"Bar diameter >100 to ≤178 mm.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":1080000000.0,"minimum":930000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":1080.0,"minimum":930.0,"significant_figures":3,"unit":"MPa"}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 48, Atlas 4340, Bar diameter >100 to ≤178 mm, row 4.8.4, Tensile strength","page":48},"state_id":"steel-atlas-4340-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.8.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-b362ad898349c2408615","material_id":"steel-atlas-4340","notes":"Bar diameter >100 to ≤178 mm.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":720000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":720.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 48, Atlas 4340, Bar diameter >100 to ≤178 mm, row 4.8.4, 0.2% proof stress, printed min","page":48},"state_id":"steel-atlas-4340-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.8.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-da9db7f646ab5a4f64c2","material_id":"steel-atlas-4340","notes":"Bar diameter >100 to ≤178 mm.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.14},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":14.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 48, Atlas 4340, Bar diameter >100 to ≤178 mm, row 4.8.4, Elongation A%, printed min","page":48},"state_id":"steel-atlas-4340-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.8.4"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"bar"},"id":"obs-a1d56c6384f78d978c0a","material_id":"steel-atlas-4340","notes":"Bar diameter >178 to ≤240 mm.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":1000000000.0,"minimum":900000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":1000.0,"minimum":900.0,"significant_figures":3,"unit":"MPa"}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 48, Atlas 4340, Bar diameter >178 to ≤240 mm, row 4.8.4, Tensile strength","page":48},"state_id":"steel-atlas-4340-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.8.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-2f465203096dc70bb93c","material_id":"steel-atlas-4340","notes":"Bar diameter >178 to ≤240 mm.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":690000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":690.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 48, Atlas 4340, Bar diameter >178 to ≤240 mm, row 4.8.4, 0.2% proof stress, printed min","page":48},"state_id":"steel-atlas-4340-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.8.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-458f793bdf3af5acf4e4","material_id":"steel-atlas-4340","notes":"Bar diameter >178 to ≤240 mm.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.14},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":14.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 48, Atlas 4340, Bar diameter >178 to ≤240 mm, row 4.8.4, Elongation A%, printed min","page":48},"state_id":"steel-atlas-4340-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.8.4"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"bar"},"id":"obs-92e5bcf4f8849f3d7ffe","material_id":"steel-atlas-6580","notes":"Bar diameter ≤40 mm.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":1450000000.0,"minimum":1300000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":1450.0,"minimum":1300.0,"significant_figures":4,"unit":"MPa"}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 51, Atlas 6580, Bar diameter ≤40 mm, row 4.9.4, Tensile strength","page":51},"state_id":"steel-atlas-6580-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.9.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-c43bb48561ba638dfbb9","material_id":"steel-atlas-6580","notes":"Bar diameter ≤40 mm.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":1100000000.0},"kind":"lower_bound","reported":{"significant_figures":4,"unit":"MPa","value":1100.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 51, Atlas 6580, Bar diameter ≤40 mm, row 4.9.4, 0.2% proof stress, printed min","page":51},"state_id":"steel-atlas-6580-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.9.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-180718b1c8e16fdfcc20","material_id":"steel-atlas-6580","notes":"Bar diameter ≤40 mm.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.09},"kind":"lower_bound","reported":{"significant_figures":1,"unit":"%","value":9.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 51, Atlas 6580, Bar diameter ≤40 mm, row 4.9.4, Elongation A%, printed min","page":51},"state_id":"steel-atlas-6580-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.9.4"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"bar"},"id":"obs-c3783a1b26aaac83bc29","material_id":"steel-atlas-6580","notes":"Bar diameter >40 to ≤100 mm.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":1300000000.0,"minimum":1200000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":1300.0,"minimum":1200.0,"significant_figures":4,"unit":"MPa"}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 51, Atlas 6580, Bar diameter >40 to ≤100 mm, row 4.9.4, Tensile strength","page":51},"state_id":"steel-atlas-6580-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.9.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-39af534c38a69e8c23dc","material_id":"steel-atlas-6580","notes":"Bar diameter >40 to ≤100 mm.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":1020000000.0},"kind":"lower_bound","reported":{"significant_figures":4,"unit":"MPa","value":1020.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 51, Atlas 6580, Bar diameter >40 to ≤100 mm, row 4.9.4, 0.2% proof stress, printed min","page":51},"state_id":"steel-atlas-6580-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.9.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-c208e603d8450846eec1","material_id":"steel-atlas-6580","notes":"Bar diameter >40 to ≤100 mm.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.1},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":10.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 51, Atlas 6580, Bar diameter >40 to ≤100 mm, row 4.9.4, Elongation A%, printed min","page":51},"state_id":"steel-atlas-6580-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.9.4"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"bar"},"id":"obs-af044b3907f6ec12639f","material_id":"steel-atlas-6580","notes":"Bar diameter >100 to ≤160 mm.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":1200000000.0,"minimum":1100000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":1200.0,"minimum":1100.0,"significant_figures":4,"unit":"MPa"}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 51, Atlas 6580, Bar diameter >100 to ≤160 mm, row 4.9.4, Tensile strength","page":51},"state_id":"steel-atlas-6580-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.9.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-01ae5dea7b0d7ea684c1","material_id":"steel-atlas-6580","notes":"Bar diameter >100 to ≤160 mm.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":925000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":925.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 51, Atlas 6580, Bar diameter >100 to ≤160 mm, row 4.9.4, 0.2% proof stress, printed min","page":51},"state_id":"steel-atlas-6580-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.9.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-5fe2ee70f52990f8366b","material_id":"steel-atlas-6580","notes":"Bar diameter >100 to ≤160 mm.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.11},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":11.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 51, Atlas 6580, Bar diameter >100 to ≤160 mm, row 4.9.4, Elongation A%, printed min","page":51},"state_id":"steel-atlas-6580-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.9.4"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"bar"},"id":"obs-23347fb45d60d2170963","material_id":"steel-atlas-6580","notes":"Bar diameter >160 to ≤250 mm.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":1100000000.0,"minimum":1000000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":1100.0,"minimum":1000.0,"significant_figures":4,"unit":"MPa"}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 51, Atlas 6580, Bar diameter >160 to ≤250 mm, row 4.9.4, Tensile strength","page":51},"state_id":"steel-atlas-6580-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.9.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-188fce46ea2da3996309","material_id":"steel-atlas-6580","notes":"Bar diameter >160 to ≤250 mm.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":820000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":820.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 51, Atlas 6580, Bar diameter >160 to ≤250 mm, row 4.9.4, 0.2% proof stress, printed min","page":51},"state_id":"steel-atlas-6580-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.9.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-521f057a4e02153d20cb","material_id":"steel-atlas-6580","notes":"Bar diameter >160 to ≤250 mm.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.12},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":12.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 51, Atlas 6580, Bar diameter >160 to ≤250 mm, row 4.9.4, Elongation A%, printed min","page":51},"state_id":"steel-atlas-6580-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.9.4"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"bar"},"id":"obs-18532bab8111ab3e2359","material_id":"steel-atlas-6580","notes":"Bar diameter >250 to ≤500 mm.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":1000000000.0,"minimum":900000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":1000.0,"minimum":900.0,"significant_figures":3,"unit":"MPa"}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 51, Atlas 6580, Bar diameter >250 to ≤500 mm, row 4.9.4, Tensile strength","page":51},"state_id":"steel-atlas-6580-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.9.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-c293719cc3fdc4f102fd","material_id":"steel-atlas-6580","notes":"Bar diameter >250 to ≤500 mm.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":700000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":700.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 51, Atlas 6580, Bar diameter >250 to ≤500 mm, row 4.9.4, 0.2% proof stress, printed min","page":51},"state_id":"steel-atlas-6580-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.9.4"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-6cf1c31943382512e7c6","material_id":"steel-atlas-6580","notes":"Bar diameter >250 to ≤500 mm.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.12},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":12.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 51, Atlas 6580, Bar diameter >250 to ≤500 mm, row 4.9.4, Elongation A%, printed min","page":51},"state_id":"steel-atlas-6580-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.9.4"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-52f5b513d91835104228","material_id":"steel-atlas-8620h","notes":"Core of test section, diameter 11 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. After carburizing, hardening and tempering; these are core properties, not case/surface values.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":1270000000.0,"minimum":980000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":1270.0,"minimum":980.0,"significant_figures":3,"unit":"MPa"}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 55, Atlas 8620H, Core of test section, diameter 11 mm, row 4.10.6, Tensile strength","page":55},"state_id":"steel-atlas-8620h-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.10.6"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-08b5903137e57c1c57d9","material_id":"steel-atlas-8620h","notes":"Core of test section, diameter 11 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. After carburizing, hardening and tempering; these are core properties, not case/surface values.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":785000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":785.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 55, Atlas 8620H, Core of test section, diameter 11 mm, row 4.10.6, Yield stress, printed min","page":55},"state_id":"steel-atlas-8620h-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.10.6"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-5e857edcb8d59e064ebf","material_id":"steel-atlas-8620h","notes":"Core of test section, diameter 11 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. After carburizing, hardening and tempering; these are core properties, not case/surface values.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.09},"kind":"lower_bound","reported":{"significant_figures":1,"unit":"%","value":9.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 55, Atlas 8620H, Core of test section, diameter 11 mm, row 4.10.6, Elongation A%, printed min","page":55},"state_id":"steel-atlas-8620h-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.10.6"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-9a8748196da0eaf808fe","material_id":"steel-atlas-8620h","notes":"Core of test section, diameter 30 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. After carburizing, hardening and tempering; these are core properties, not case/surface values.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":1080000000.0,"minimum":780000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":1080.0,"minimum":780.0,"significant_figures":3,"unit":"MPa"}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 55, Atlas 8620H, Core of test section, diameter 30 mm, row 4.10.6, Tensile strength","page":55},"state_id":"steel-atlas-8620h-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.10.6"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-335e6c9dfcd61bd6fe8d","material_id":"steel-atlas-8620h","notes":"Core of test section, diameter 30 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. After carburizing, hardening and tempering; these are core properties, not case/surface values.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":590000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":590.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 55, Atlas 8620H, Core of test section, diameter 30 mm, row 4.10.6, Yield stress, printed min","page":55},"state_id":"steel-atlas-8620h-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.10.6"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-6f5ecc86e3f2b8decb61","material_id":"steel-atlas-8620h","notes":"Core of test section, diameter 30 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. After carburizing, hardening and tempering; these are core properties, not case/surface values.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.1},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":10.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 55, Atlas 8620H, Core of test section, diameter 30 mm, row 4.10.6, Elongation A%, printed min","page":55},"state_id":"steel-atlas-8620h-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.10.6"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-08cb5a7a8317b9451ac2","material_id":"steel-atlas-8620h","notes":"Core of test section, diameter 63 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. After carburizing, hardening and tempering; these are core properties, not case/surface values.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":930000000.0,"minimum":690000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":930.0,"minimum":690.0,"significant_figures":3,"unit":"MPa"}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 55, Atlas 8620H, Core of test section, diameter 63 mm, row 4.10.6, Tensile strength","page":55},"state_id":"steel-atlas-8620h-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.10.6"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-241b96d96fb19035b02a","material_id":"steel-atlas-8620h","notes":"Core of test section, diameter 63 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. After carburizing, hardening and tempering; these are core properties, not case/surface values.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":490000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":490.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 55, Atlas 8620H, Core of test section, diameter 63 mm, row 4.10.6, Yield stress, printed min","page":55},"state_id":"steel-atlas-8620h-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.10.6"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-e7df292e04237ddb2d94","material_id":"steel-atlas-8620h","notes":"Core of test section, diameter 63 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. After carburizing, hardening and tempering; these are core properties, not case/surface values.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.11},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":11.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 55, Atlas 8620H, Core of test section, diameter 63 mm, row 4.10.6, Elongation A%, printed min","page":55},"state_id":"steel-atlas-8620h-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.10.6"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-773f3a6922b44dec41d4","material_id":"steel-atlas-6587","notes":"Core of test section, diameter 11 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. After carburizing, hardening and tempering; these are core properties, not case/surface values.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":1420000000.0,"minimum":1180000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":1420.0,"minimum":1180.0,"significant_figures":4,"unit":"MPa"}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 56, Atlas 6587, Core of test section, diameter 11 mm, row 4.11.6, Tensile strength","page":56},"state_id":"steel-atlas-6587-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.11.6"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-fbae2bde111f90ad9801","material_id":"steel-atlas-6587","notes":"Core of test section, diameter 11 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. After carburizing, hardening and tempering; these are core properties, not case/surface values.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":835000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":835.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 56, Atlas 6587, Core of test section, diameter 11 mm, row 4.11.6, Yield stress, printed min","page":56},"state_id":"steel-atlas-6587-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.11.6"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-80318e3f55e2bae7a43f","material_id":"steel-atlas-6587","notes":"Core of test section, diameter 11 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. After carburizing, hardening and tempering; these are core properties, not case/surface values.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.07},"kind":"lower_bound","reported":{"significant_figures":1,"unit":"%","value":7.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 56, Atlas 6587, Core of test section, diameter 11 mm, row 4.11.6, Elongation A%, printed min","page":56},"state_id":"steel-atlas-6587-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.11.6"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-0be6452151cc7f835291","material_id":"steel-atlas-6587","notes":"Core of test section, diameter 30 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. After carburizing, hardening and tempering; these are core properties, not case/surface values.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":1320000000.0,"minimum":1080000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":1320.0,"minimum":1080.0,"significant_figures":4,"unit":"MPa"}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 56, Atlas 6587, Core of test section, diameter 30 mm, row 4.11.6, Tensile strength","page":56},"state_id":"steel-atlas-6587-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.11.6"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-e1f4bbbc3a2566404a10","material_id":"steel-atlas-6587","notes":"Core of test section, diameter 30 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. After carburizing, hardening and tempering; these are core properties, not case/surface values.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":785000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":785.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 56, Atlas 6587, Core of test section, diameter 30 mm, row 4.11.6, Yield stress, printed min","page":56},"state_id":"steel-atlas-6587-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.11.6"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-ff93bbc7e77925ce6cbf","material_id":"steel-atlas-6587","notes":"Core of test section, diameter 30 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. After carburizing, hardening and tempering; these are core properties, not case/surface values.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.08},"kind":"lower_bound","reported":{"significant_figures":1,"unit":"%","value":8.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 56, Atlas 6587, Core of test section, diameter 30 mm, row 4.11.6, Elongation A%, printed min","page":56},"state_id":"steel-atlas-6587-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.11.6"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-1a2f957cbb0c236129f2","material_id":"steel-atlas-6587","notes":"Core of test section, diameter 63 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. After carburizing, hardening and tempering; these are core properties, not case/surface values.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":1270000000.0,"minimum":980000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":1270.0,"minimum":980.0,"significant_figures":3,"unit":"MPa"}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 56, Atlas 6587, Core of test section, diameter 63 mm, row 4.11.6, Tensile strength","page":56},"state_id":"steel-atlas-6587-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.11.6"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-91c7cbc561a7677d5f6d","material_id":"steel-atlas-6587","notes":"Core of test section, diameter 63 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. After carburizing, hardening and tempering; these are core properties, not case/surface values.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":685000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":685.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 56, Atlas 6587, Core of test section, diameter 63 mm, row 4.11.6, Yield stress, printed min","page":56},"state_id":"steel-atlas-6587-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.11.6"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-5724963004b2499105d3","material_id":"steel-atlas-6587","notes":"Core of test section, diameter 63 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. After carburizing, hardening and tempering; these are core properties, not case/surface values.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.08},"kind":"lower_bound","reported":{"significant_figures":1,"unit":"%","value":8.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 56, Atlas 6587, Core of test section, diameter 63 mm, row 4.11.6, Elongation A%, printed min","page":56},"state_id":"steel-atlas-6587-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.11.6"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-9e12ef82ffe0f8c972c6","material_id":"steel-atlas-6657","notes":"Core of test section, diameter 11 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. After carburizing, hardening and tempering; these are core properties, not case/surface values.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":1480000000.0,"minimum":1230000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":1480.0,"minimum":1230.0,"significant_figures":4,"unit":"MPa"}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 59, Atlas 6657, Core of test section, diameter 11 mm, row 4.12.6, Tensile strength","page":59},"state_id":"steel-atlas-6657-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.12.6"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-7c360ba3d4097c212928","material_id":"steel-atlas-6657","notes":"Core of test section, diameter 11 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. After carburizing, hardening and tempering; these are core properties, not case/surface values.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.09},"kind":"lower_bound","reported":{"significant_figures":1,"unit":"%","value":9.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 59, Atlas 6657, Core of test section, diameter 11 mm, row 4.12.6, Elongation A%, printed min","page":59},"state_id":"steel-atlas-6657-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.12.6"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-f87d2b0bcb63e247cb6f","material_id":"steel-atlas-6657","notes":"Core of test section, diameter 30 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. After carburizing, hardening and tempering; these are core properties, not case/surface values.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":1330000000.0,"minimum":1030000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":1330.0,"minimum":1030.0,"significant_figures":4,"unit":"MPa"}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 59, Atlas 6657, Core of test section, diameter 30 mm, row 4.12.6, Tensile strength","page":59},"state_id":"steel-atlas-6657-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.12.6"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-6f5c35aa64a3c0528f73","material_id":"steel-atlas-6657","notes":"Core of test section, diameter 30 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. After carburizing, hardening and tempering; these are core properties, not case/surface values.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.1},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":10.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 59, Atlas 6657, Core of test section, diameter 30 mm, row 4.12.6, Elongation A%, printed min","page":59},"state_id":"steel-atlas-6657-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.12.6"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-66624f8e84108f0882a1","material_id":"steel-atlas-6657","notes":"Core of test section, diameter 63 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. After carburizing, hardening and tempering; these are core properties, not case/surface values.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":1180000000.0,"minimum":880000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":1180.0,"minimum":880.0,"significant_figures":3,"unit":"MPa"}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 59, Atlas 6657, Core of test section, diameter 63 mm, row 4.12.6, Tensile strength","page":59},"state_id":"steel-atlas-6657-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.12.6"},"uncertainty":null},{"basis":"typical","conditions":{"product_form":"bar"},"id":"obs-2ecd600eae15c1afd605","material_id":"steel-atlas-6657","notes":"Core of test section, diameter 63 mm. Typical reference values; not guaranteed supply requirements. Printed minimum labels are retained as typical lower bounds. After carburizing, hardening and tempering; these are core properties, not case/surface values.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.11},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":11.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 59, Atlas 6657, Core of test section, diameter 63 mm, row 4.12.6, Elongation A%, printed min","page":59},"state_id":"steel-atlas-6657-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.12.6"},"uncertainty":null},{"basis":"specified_range","conditions":{"product_form":"bar"},"id":"obs-e996bf18d0de9d0245d8","material_id":"steel-atlas-micro900","notes":"Bar diameter ≤150 mm.","property_id":"ultimate_tensile_strength","result":{"canonical":{"maximum":1000000000.0,"minimum":850000000.0,"unit":"Pa"},"kind":"interval","reported":{"maximum":1000.0,"minimum":850.0,"significant_figures":3,"unit":"MPa"}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 60, Atlas Micro900, Bar diameter ≤150 mm, row 4.13.4.1, Tensile strength","page":60},"state_id":"steel-atlas-micro900-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.13.4.1"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-08e2b57c1bce1e9fd840","material_id":"steel-atlas-micro900","notes":"Bar diameter ≤150 mm.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":600000000.0},"kind":"lower_bound","reported":{"significant_figures":3,"unit":"MPa","value":600.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 60, Atlas Micro900, Bar diameter ≤150 mm, row 4.13.4.1, 0.2% proof stress, printed min","page":60},"state_id":"steel-atlas-micro900-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.13.4.1"},"uncertainty":null},{"basis":"minimum","conditions":{"product_form":"bar"},"id":"obs-20fcc5267bed1517c42a","material_id":"steel-atlas-micro900","notes":"Bar diameter ≤150 mm.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.13},"kind":"lower_bound","reported":{"significant_figures":2,"unit":"%","value":13.0}},"source_id":"atlas-engineering-bar","source_locator":{"label":"Page 60, Atlas Micro900, Bar diameter ≤150 mm, row 4.13.4.1, Elongation %, printed min","page":60},"state_id":"steel-atlas-micro900-reference","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Atlas handbook section 4.13.4.1"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-ddc1695cc9a8bfdf86d9","material_id":"steel-uddeholm-arne","notes":"Hardened and tempered to 62 HRC.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7800.0},"kind":"point","reported":{"significant_figures":4,"unit":"kg/m³","value":7800.0}},"source_id":"uddeholm-arne","source_locator":{"label":"Page 3, Physical properties, 62 HRC, row density at 20 °C","page":3},"state_id":"steel-uddeholm-arne-hardened-and-tempered-62-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":473.15},"id":"obs-a85009d4227051e34a84","material_id":"steel-uddeholm-arne","notes":"Hardened and tempered to 62 HRC.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7750.0},"kind":"point","reported":{"significant_figures":4,"unit":"kg/m³","value":7750.0}},"source_id":"uddeholm-arne","source_locator":{"label":"Page 3, Physical properties, 62 HRC, row density at 200 °C","page":3},"state_id":"steel-uddeholm-arne-hardened-and-tempered-62-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":673.15},"id":"obs-a81a3f883d2a037f103c","material_id":"steel-uddeholm-arne","notes":"Hardened and tempered to 62 HRC.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7700.0},"kind":"point","reported":{"significant_figures":4,"unit":"kg/m³","value":7700.0}},"source_id":"uddeholm-arne","source_locator":{"label":"Page 3, Physical properties, 62 HRC, row density at 400 °C","page":3},"state_id":"steel-uddeholm-arne-hardened-and-tempered-62-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-25aa4c272aea65b7bde9","material_id":"steel-uddeholm-arne","notes":"Hardened and tempered to 62 HRC.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":190000000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"N/mm²","value":190000.0}},"source_id":"uddeholm-arne","source_locator":{"label":"Page 3, Physical properties, 62 HRC, row youngs_modulus at 20 °C","page":3},"state_id":"steel-uddeholm-arne-hardened-and-tempered-62-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":473.15},"id":"obs-11ea50f8703c7e7b1e59","material_id":"steel-uddeholm-arne","notes":"Hardened and tempered to 62 HRC.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":185000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"N/mm²","value":185000.0}},"source_id":"uddeholm-arne","source_locator":{"label":"Page 3, Physical properties, 62 HRC, row youngs_modulus at 200 °C","page":3},"state_id":"steel-uddeholm-arne-hardened-and-tempered-62-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":673.15},"id":"obs-ca782d18f13cac6d7dfa","material_id":"steel-uddeholm-arne","notes":"Hardened and tempered to 62 HRC.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":170000000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"N/mm²","value":170000.0}},"source_id":"uddeholm-arne","source_locator":{"label":"Page 3, Physical properties, 62 HRC, row youngs_modulus at 400 °C","page":3},"state_id":"steel-uddeholm-arne-hardened-and-tempered-62-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-617b87beb64bfacb2739","material_id":"steel-uddeholm-arne","notes":"Hardened and tempered to 62 HRC.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":32.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·°C)","value":32.0}},"source_id":"uddeholm-arne","source_locator":{"label":"Page 3, Physical properties, 62 HRC, row thermal_conductivity at 20 °C","page":3},"state_id":"steel-uddeholm-arne-hardened-and-tempered-62-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":473.15},"id":"obs-fb9750f8990e90553677","material_id":"steel-uddeholm-arne","notes":"Hardened and tempered to 62 HRC.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":33.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·°C)","value":33.0}},"source_id":"uddeholm-arne","source_locator":{"label":"Page 3, Physical properties, 62 HRC, row thermal_conductivity at 200 °C","page":3},"state_id":"steel-uddeholm-arne-hardened-and-tempered-62-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":673.15},"id":"obs-9f631df4cc53feec7380","material_id":"steel-uddeholm-arne","notes":"Hardened and tempered to 62 HRC.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":34.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·°C)","value":34.0}},"source_id":"uddeholm-arne","source_locator":{"label":"Page 3, Physical properties, 62 HRC, row thermal_conductivity at 400 °C","page":3},"state_id":"steel-uddeholm-arne-hardened-and-tempered-62-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-74ed2ba6f44ae4c91c6d","material_id":"steel-uddeholm-arne","notes":"Hardened and tempered to 62 HRC.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":460.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·°C)","value":460.0}},"source_id":"uddeholm-arne","source_locator":{"label":"Page 3, Physical properties, 62 HRC, row specific_heat at 20 °C","page":3},"state_id":"steel-uddeholm-arne-hardened-and-tempered-62-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-7d2d4c07b16c748ee79a","material_id":"steel-uddeholm-rigor","notes":"Hardened and tempered to 62 HRC.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7750.0},"kind":"point","reported":{"significant_figures":4,"unit":"kg/m³","value":7750.0}},"source_id":"uddeholm-rigor","source_locator":{"label":"Page 4, Physical properties, 62 HRC, row density at 20 °C","page":4},"state_id":"steel-uddeholm-rigor-hardened-and-tempered-62-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":473.15},"id":"obs-3d36015ba69a915917d3","material_id":"steel-uddeholm-rigor","notes":"Hardened and tempered to 62 HRC.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7700.0},"kind":"point","reported":{"significant_figures":4,"unit":"kg/m³","value":7700.0}},"source_id":"uddeholm-rigor","source_locator":{"label":"Page 4, Physical properties, 62 HRC, row density at 200 °C","page":4},"state_id":"steel-uddeholm-rigor-hardened-and-tempered-62-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":673.15},"id":"obs-646d4373d3c8757b7e23","material_id":"steel-uddeholm-rigor","notes":"Hardened and tempered to 62 HRC.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7650.0},"kind":"point","reported":{"significant_figures":4,"unit":"kg/m³","value":7650.0}},"source_id":"uddeholm-rigor","source_locator":{"label":"Page 4, Physical properties, 62 HRC, row density at 400 °C","page":4},"state_id":"steel-uddeholm-rigor-hardened-and-tempered-62-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-df7d4f4b7f58e2ded4ba","material_id":"steel-uddeholm-rigor","notes":"Hardened and tempered to 62 HRC.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":190000000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"N/mm²","value":190000.0}},"source_id":"uddeholm-rigor","source_locator":{"label":"Page 4, Physical properties, 62 HRC, row youngs_modulus at 20 °C","page":4},"state_id":"steel-uddeholm-rigor-hardened-and-tempered-62-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":473.15},"id":"obs-910bd39e882c883c8d6e","material_id":"steel-uddeholm-rigor","notes":"Hardened and tempered to 62 HRC.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":185000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"N/mm²","value":185000.0}},"source_id":"uddeholm-rigor","source_locator":{"label":"Page 4, Physical properties, 62 HRC, row youngs_modulus at 200 °C","page":4},"state_id":"steel-uddeholm-rigor-hardened-and-tempered-62-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":673.15},"id":"obs-3401245f11791876207b","material_id":"steel-uddeholm-rigor","notes":"Hardened and tempered to 62 HRC.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":170000000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"N/mm²","value":170000.0}},"source_id":"uddeholm-rigor","source_locator":{"label":"Page 4, Physical properties, 62 HRC, row youngs_modulus at 400 °C","page":4},"state_id":"steel-uddeholm-rigor-hardened-and-tempered-62-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-b62d5f5f96f3aab57b14","material_id":"steel-uddeholm-rigor","notes":"Hardened and tempered to 62 HRC.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":26.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·°C)","value":26.0}},"source_id":"uddeholm-rigor","source_locator":{"label":"Page 4, Physical properties, 62 HRC, row thermal_conductivity at 20 °C","page":4},"state_id":"steel-uddeholm-rigor-hardened-and-tempered-62-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":473.15},"id":"obs-5ab8a32dcb0d88a2ba35","material_id":"steel-uddeholm-rigor","notes":"Hardened and tempered to 62 HRC.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":27.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·°C)","value":27.0}},"source_id":"uddeholm-rigor","source_locator":{"label":"Page 4, Physical properties, 62 HRC, row thermal_conductivity at 200 °C","page":4},"state_id":"steel-uddeholm-rigor-hardened-and-tempered-62-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":673.15},"id":"obs-04b18237ddea76453999","material_id":"steel-uddeholm-rigor","notes":"Hardened and tempered to 62 HRC.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":28.5},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·°C)","value":28.5}},"source_id":"uddeholm-rigor","source_locator":{"label":"Page 4, Physical properties, 62 HRC, row thermal_conductivity at 400 °C","page":4},"state_id":"steel-uddeholm-rigor-hardened-and-tempered-62-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-a2448aa4f550ca7bcc5b","material_id":"steel-uddeholm-rigor","notes":"Hardened and tempered to 62 HRC.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":460.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·°C)","value":460.0}},"source_id":"uddeholm-rigor","source_locator":{"label":"Page 4, Physical properties, 62 HRC, row specific_heat at 20 °C","page":4},"state_id":"steel-uddeholm-rigor-hardened-and-tempered-62-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-8d9d14412c2881b159c8","material_id":"steel-uddeholm-sverker-21","notes":"Hardened and tempered to 62 HRC.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7700.0},"kind":"point","reported":{"significant_figures":4,"unit":"kg/m³","value":7700.0}},"source_id":"uddeholm-sverker-21","source_locator":{"label":"Page 3, Physical properties, 62 HRC, row density at 20 °C","page":3},"state_id":"steel-uddeholm-sverker-21-hardened-and-tempered-62-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":473.15},"id":"obs-13880ac85f9afef5e4fb","material_id":"steel-uddeholm-sverker-21","notes":"Hardened and tempered to 62 HRC.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7650.0},"kind":"point","reported":{"significant_figures":4,"unit":"kg/m³","value":7650.0}},"source_id":"uddeholm-sverker-21","source_locator":{"label":"Page 3, Physical properties, 62 HRC, row density at 200 °C","page":3},"state_id":"steel-uddeholm-sverker-21-hardened-and-tempered-62-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":673.15},"id":"obs-aee6b72c24683c71594a","material_id":"steel-uddeholm-sverker-21","notes":"Hardened and tempered to 62 HRC.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7600.0},"kind":"point","reported":{"significant_figures":4,"unit":"kg/m³","value":7600.0}},"source_id":"uddeholm-sverker-21","source_locator":{"label":"Page 3, Physical properties, 62 HRC, row density at 400 °C","page":3},"state_id":"steel-uddeholm-sverker-21-hardened-and-tempered-62-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-312ff3b0bcd40089494c","material_id":"steel-uddeholm-sverker-21","notes":"Hardened and tempered to 62 HRC.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":210000000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":210000.0}},"source_id":"uddeholm-sverker-21","source_locator":{"label":"Page 3, Physical properties, 62 HRC, row youngs_modulus at 20 °C","page":3},"state_id":"steel-uddeholm-sverker-21-hardened-and-tempered-62-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":473.15},"id":"obs-25b57a46150ca18c68ee","material_id":"steel-uddeholm-sverker-21","notes":"Hardened and tempered to 62 HRC.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":200000000000.0},"kind":"point","reported":{"significant_figures":1,"unit":"MPa","value":200000.0}},"source_id":"uddeholm-sverker-21","source_locator":{"label":"Page 3, Physical properties, 62 HRC, row youngs_modulus at 200 °C","page":3},"state_id":"steel-uddeholm-sverker-21-hardened-and-tempered-62-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":673.15},"id":"obs-2df0022f2880357a7809","material_id":"steel-uddeholm-sverker-21","notes":"Hardened and tempered to 62 HRC.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":180000000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":180000.0}},"source_id":"uddeholm-sverker-21","source_locator":{"label":"Page 3, Physical properties, 62 HRC, row youngs_modulus at 400 °C","page":3},"state_id":"steel-uddeholm-sverker-21-hardened-and-tempered-62-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-8d0fa05efd821eb97802","material_id":"steel-uddeholm-sverker-21","notes":"Hardened and tempered to 62 HRC.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":20.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·°C)","value":20.0}},"source_id":"uddeholm-sverker-21","source_locator":{"label":"Page 3, Physical properties, 62 HRC, row thermal_conductivity at 20 °C","page":3},"state_id":"steel-uddeholm-sverker-21-hardened-and-tempered-62-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":473.15},"id":"obs-1619c1b93528f4a6735c","material_id":"steel-uddeholm-sverker-21","notes":"Hardened and tempered to 62 HRC.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":21.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·°C)","value":21.0}},"source_id":"uddeholm-sverker-21","source_locator":{"label":"Page 3, Physical properties, 62 HRC, row thermal_conductivity at 200 °C","page":3},"state_id":"steel-uddeholm-sverker-21-hardened-and-tempered-62-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":673.15},"id":"obs-de1d9028fa71004ac7d1","material_id":"steel-uddeholm-sverker-21","notes":"Hardened and tempered to 62 HRC.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":23.0},"kind":"point","reported":{"significant_figures":3,"unit":"W/(m·°C)","value":23.0}},"source_id":"uddeholm-sverker-21","source_locator":{"label":"Page 3, Physical properties, 62 HRC, row thermal_conductivity at 400 °C","page":3},"state_id":"steel-uddeholm-sverker-21-hardened-and-tempered-62-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-09740a6c9a6aa5c1f45a","material_id":"steel-uddeholm-sverker-21","notes":"Hardened and tempered to 62 HRC.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":460.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·°C)","value":460.0}},"source_id":"uddeholm-sverker-21","source_locator":{"label":"Page 3, Physical properties, 62 HRC, row specific_heat at 20 °C","page":3},"state_id":"steel-uddeholm-sverker-21-hardened-and-tempered-62-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-b20b7d093e9abf5574f3","material_id":"steel-uddeholm-orvar-supreme","notes":"Specimens from the centre of a 407 × 127 mm bar; hardened 30 min at 1025 °C, air quenched, tempered 2 + 2 h at 610 °C; 45 ± 1 HRC.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7800.0},"kind":"point","reported":{"significant_figures":4,"unit":"kg/m³","value":7800.0}},"source_id":"uddeholm-orvar-supreme","source_locator":{"label":"Page 4, Physical properties, 45 ± 1 HRC, row density at 20 °C","page":4},"state_id":"steel-uddeholm-orvar-supreme-hardened-and-tempered-45-1-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":673.15},"id":"obs-1718b9ca11b8b32742ca","material_id":"steel-uddeholm-orvar-supreme","notes":"Specimens from the centre of a 407 × 127 mm bar; hardened 30 min at 1025 °C, air quenched, tempered 2 + 2 h at 610 °C; 45 ± 1 HRC.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7700.0},"kind":"point","reported":{"significant_figures":4,"unit":"kg/m³","value":7700.0}},"source_id":"uddeholm-orvar-supreme","source_locator":{"label":"Page 4, Physical properties, 45 ± 1 HRC, row density at 400 °C","page":4},"state_id":"steel-uddeholm-orvar-supreme-hardened-and-tempered-45-1-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":873.15},"id":"obs-56d88a960bc4c44005f7","material_id":"steel-uddeholm-orvar-supreme","notes":"Specimens from the centre of a 407 × 127 mm bar; hardened 30 min at 1025 °C, air quenched, tempered 2 + 2 h at 610 °C; 45 ± 1 HRC.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7600.0},"kind":"point","reported":{"significant_figures":4,"unit":"kg/m³","value":7600.0}},"source_id":"uddeholm-orvar-supreme","source_locator":{"label":"Page 4, Physical properties, 45 ± 1 HRC, row density at 600 °C","page":4},"state_id":"steel-uddeholm-orvar-supreme-hardened-and-tempered-45-1-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-291a0628eca303f6bf45","material_id":"steel-uddeholm-orvar-supreme","notes":"Specimens from the centre of a 407 × 127 mm bar; hardened 30 min at 1025 °C, air quenched, tempered 2 + 2 h at 610 °C; 45 ± 1 HRC.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":210000000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":210000.0}},"source_id":"uddeholm-orvar-supreme","source_locator":{"label":"Page 4, Physical properties, 45 ± 1 HRC, row youngs_modulus at 20 °C","page":4},"state_id":"steel-uddeholm-orvar-supreme-hardened-and-tempered-45-1-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":673.15},"id":"obs-a3edbfb10ab39147cc38","material_id":"steel-uddeholm-orvar-supreme","notes":"Specimens from the centre of a 407 × 127 mm bar; hardened 30 min at 1025 °C, air quenched, tempered 2 + 2 h at 610 °C; 45 ± 1 HRC.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":180000000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":180000.0}},"source_id":"uddeholm-orvar-supreme","source_locator":{"label":"Page 4, Physical properties, 45 ± 1 HRC, row youngs_modulus at 400 °C","page":4},"state_id":"steel-uddeholm-orvar-supreme-hardened-and-tempered-45-1-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":873.15},"id":"obs-1284e869f2141287ff9b","material_id":"steel-uddeholm-orvar-supreme","notes":"Specimens from the centre of a 407 × 127 mm bar; hardened 30 min at 1025 °C, air quenched, tempered 2 + 2 h at 610 °C; 45 ± 1 HRC.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":140000000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":140000.0}},"source_id":"uddeholm-orvar-supreme","source_locator":{"label":"Page 4, Physical properties, 45 ± 1 HRC, row youngs_modulus at 600 °C","page":4},"state_id":"steel-uddeholm-orvar-supreme-hardened-and-tempered-45-1-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-e49b80feddffeaadb063","material_id":"steel-uddeholm-orvar-supreme","notes":"Specimens from the centre of a 407 × 127 mm bar; hardened 30 min at 1025 °C, air quenched, tempered 2 + 2 h at 610 °C; 45 ± 1 HRC.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":25.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·°C)","value":25.0}},"source_id":"uddeholm-orvar-supreme","source_locator":{"label":"Page 4, Physical properties, 45 ± 1 HRC, row thermal_conductivity at 20 °C","page":4},"state_id":"steel-uddeholm-orvar-supreme-hardened-and-tempered-45-1-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":673.15},"id":"obs-b9fe162d5326a2d68466","material_id":"steel-uddeholm-orvar-supreme","notes":"Specimens from the centre of a 407 × 127 mm bar; hardened 30 min at 1025 °C, air quenched, tempered 2 + 2 h at 610 °C; 45 ± 1 HRC.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":29.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·°C)","value":29.0}},"source_id":"uddeholm-orvar-supreme","source_locator":{"label":"Page 4, Physical properties, 45 ± 1 HRC, row thermal_conductivity at 400 °C","page":4},"state_id":"steel-uddeholm-orvar-supreme-hardened-and-tempered-45-1-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":873.15},"id":"obs-e82f80c987d071411149","material_id":"steel-uddeholm-orvar-supreme","notes":"Specimens from the centre of a 407 × 127 mm bar; hardened 30 min at 1025 °C, air quenched, tempered 2 + 2 h at 610 °C; 45 ± 1 HRC.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":30.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·°C)","value":30.0}},"source_id":"uddeholm-orvar-supreme","source_locator":{"label":"Page 4, Physical properties, 45 ± 1 HRC, row thermal_conductivity at 600 °C","page":4},"state_id":"steel-uddeholm-orvar-supreme-hardened-and-tempered-45-1-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{},"id":"obs-2f9221dc5dc2e72b564b","material_id":"steel-uddeholm-orvar-supreme","notes":"Room temperature (not quantified); hardness 52 HRC.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":1820000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":1820.0}},"source_id":"uddeholm-orvar-supreme","source_locator":{"label":"Page 4, Tensile properties at room temperature, 52 HRC, row Tensile strength Rm","page":4},"state_id":"steel-uddeholm-orvar-supreme-hardened-and-tempered-52-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm tabulated tensile properties"},"uncertainty":null},{"basis":"reference","conditions":{},"id":"obs-fee443be843031cc4ec7","material_id":"steel-uddeholm-orvar-supreme","notes":"Room temperature (not quantified); hardness 52 HRC.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":1520000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":1520.0}},"source_id":"uddeholm-orvar-supreme","source_locator":{"label":"Page 4, Tensile properties at room temperature, 52 HRC, row 0.2% proof strength Rp0.2","page":4},"state_id":"steel-uddeholm-orvar-supreme-hardened-and-tempered-52-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm tabulated tensile properties"},"uncertainty":null},{"basis":"reference","conditions":{},"id":"obs-1c081ff7a8afd142fe4f","material_id":"steel-uddeholm-orvar-supreme","notes":"Room temperature (not quantified); hardness 45 HRC.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":1420000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":1420.0}},"source_id":"uddeholm-orvar-supreme","source_locator":{"label":"Page 4, Tensile properties at room temperature, 45 HRC, row Tensile strength Rm","page":4},"state_id":"steel-uddeholm-orvar-supreme-hardened-and-tempered-45-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm tabulated tensile properties"},"uncertainty":null},{"basis":"reference","conditions":{},"id":"obs-8e8c3d8f3a1e27e59ca0","material_id":"steel-uddeholm-orvar-supreme","notes":"Room temperature (not quantified); hardness 45 HRC.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":1280000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":1280.0}},"source_id":"uddeholm-orvar-supreme","source_locator":{"label":"Page 4, Tensile properties at room temperature, 45 HRC, row 0.2% proof strength Rp0.2","page":4},"state_id":"steel-uddeholm-orvar-supreme-hardened-and-tempered-45-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm tabulated tensile properties"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-b8509b252fc1adac7c66","material_id":"steel-uddeholm-stavax-esr","notes":"Hardened and tempered to 50 HRC.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7800.0},"kind":"point","reported":{"significant_figures":4,"unit":"kg/m³","value":7800.0}},"source_id":"uddeholm-stavax-esr","source_locator":{"label":"Page 4, Physical properties, 50 HRC, row density at 20 °C","page":4},"state_id":"steel-uddeholm-stavax-esr-hardened-and-tempered-50-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":473.15},"id":"obs-0e49c4ab1acf8116bc70","material_id":"steel-uddeholm-stavax-esr","notes":"Hardened and tempered to 50 HRC.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7750.0},"kind":"point","reported":{"significant_figures":4,"unit":"kg/m³","value":7750.0}},"source_id":"uddeholm-stavax-esr","source_locator":{"label":"Page 4, Physical properties, 50 HRC, row density at 200 °C","page":4},"state_id":"steel-uddeholm-stavax-esr-hardened-and-tempered-50-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":673.15},"id":"obs-e9fb633db9462d4e46ab","material_id":"steel-uddeholm-stavax-esr","notes":"Hardened and tempered to 50 HRC.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7700.0},"kind":"point","reported":{"significant_figures":4,"unit":"kg/m³","value":7700.0}},"source_id":"uddeholm-stavax-esr","source_locator":{"label":"Page 4, Physical properties, 50 HRC, row density at 400 °C","page":4},"state_id":"steel-uddeholm-stavax-esr-hardened-and-tempered-50-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-2ff229afef00d1261d79","material_id":"steel-uddeholm-stavax-esr","notes":"Hardened and tempered to 50 HRC.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":210000000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"N/mm²","value":210000.0}},"source_id":"uddeholm-stavax-esr","source_locator":{"label":"Page 4, Physical properties, 50 HRC, row youngs_modulus at 20 °C","page":4},"state_id":"steel-uddeholm-stavax-esr-hardened-and-tempered-50-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":473.15},"id":"obs-9c883361bc5a85618904","material_id":"steel-uddeholm-stavax-esr","notes":"Hardened and tempered to 50 HRC.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":200000000000.0},"kind":"point","reported":{"significant_figures":1,"unit":"N/mm²","value":200000.0}},"source_id":"uddeholm-stavax-esr","source_locator":{"label":"Page 4, Physical properties, 50 HRC, row youngs_modulus at 200 °C","page":4},"state_id":"steel-uddeholm-stavax-esr-hardened-and-tempered-50-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":673.15},"id":"obs-4f1e1c5fb506d6c94d01","material_id":"steel-uddeholm-stavax-esr","notes":"Hardened and tempered to 50 HRC.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":185000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"N/mm²","value":185000.0}},"source_id":"uddeholm-stavax-esr","source_locator":{"label":"Page 4, Physical properties, 50 HRC, row youngs_modulus at 400 °C","page":4},"state_id":"steel-uddeholm-stavax-esr-hardened-and-tempered-50-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-50d7ddb40f660b531453","material_id":"steel-uddeholm-stavax-esr","notes":"Hardened and tempered to 50 HRC. Source footnote: measurement scatter can be as high as ±15%; no statistical distribution specified.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":16.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·°C)","value":16.0}},"source_id":"uddeholm-stavax-esr","source_locator":{"label":"Page 4, Physical properties, 50 HRC, row thermal_conductivity at 20 °C","page":4},"state_id":"steel-uddeholm-stavax-esr-hardened-and-tempered-50-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":473.15},"id":"obs-af27a374509dbd3a2784","material_id":"steel-uddeholm-stavax-esr","notes":"Hardened and tempered to 50 HRC. Source footnote: measurement scatter can be as high as ±15%; no statistical distribution specified.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":20.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·°C)","value":20.0}},"source_id":"uddeholm-stavax-esr","source_locator":{"label":"Page 4, Physical properties, 50 HRC, row thermal_conductivity at 200 °C","page":4},"state_id":"steel-uddeholm-stavax-esr-hardened-and-tempered-50-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":673.15},"id":"obs-23e9122d78db04d76dad","material_id":"steel-uddeholm-stavax-esr","notes":"Hardened and tempered to 50 HRC. Source footnote: measurement scatter can be as high as ±15%; no statistical distribution specified.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":24.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·°C)","value":24.0}},"source_id":"uddeholm-stavax-esr","source_locator":{"label":"Page 4, Physical properties, 50 HRC, row thermal_conductivity at 400 °C","page":4},"state_id":"steel-uddeholm-stavax-esr-hardened-and-tempered-50-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-c909b0f51b12687bf1bb","material_id":"steel-uddeholm-stavax-esr","notes":"Hardened and tempered to 50 HRC.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":460.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·°C)","value":460.0}},"source_id":"uddeholm-stavax-esr","source_locator":{"label":"Page 4, Physical properties, 50 HRC, row specific_heat at 20 °C","page":4},"state_id":"steel-uddeholm-stavax-esr-hardened-and-tempered-50-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"orientation":"L","product_form":"bar"},"id":"obs-d1c671250bb111f498f4","material_id":"steel-uddeholm-stavax-esr","notes":"Room temperature (not quantified); hardness 50 HRC. Samples from 25 mm diameter bar in the rolling direction; oil hardened from 1025 ±10 °C and tempered twice to the indicated hardness.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":1780000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":1780.0}},"source_id":"uddeholm-stavax-esr","source_locator":{"label":"Page 4, Tensile properties at room temperature, 50 HRC, row Tensile strength Rm","page":4},"state_id":"steel-uddeholm-stavax-esr-hardened-and-tempered-50-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm tabulated tensile properties"},"uncertainty":null},{"basis":"reference","conditions":{"orientation":"L","product_form":"bar"},"id":"obs-cac55d38ca0ab533226e","material_id":"steel-uddeholm-stavax-esr","notes":"Room temperature (not quantified); hardness 45 HRC. Samples from 25 mm diameter bar in the rolling direction; oil hardened from 1025 ±10 °C and tempered twice to the indicated hardness.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":1420000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":1420.0}},"source_id":"uddeholm-stavax-esr","source_locator":{"label":"Page 4, Tensile properties at room temperature, 45 HRC, row Tensile strength Rm","page":4},"state_id":"steel-uddeholm-stavax-esr-hardened-and-tempered-45-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm tabulated tensile properties"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-9cdcd5d0c29d16390f25","material_id":"steel-uddeholm-carmo","notes":"Delivery condition: prehardened to 240–270 HB.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7780.0},"kind":"point","reported":{"significant_figures":4,"unit":"kg/m³","value":7780.0}},"source_id":"uddeholm-carmo","source_locator":{"label":"Page 4, Physical properties, 240–270 HB, row density at 20 °C","page":4},"state_id":"steel-uddeholm-carmo-hardened-and-tempered-240-270-hb","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":473.15},"id":"obs-aeb910bd6d0a63d4d6bb","material_id":"steel-uddeholm-carmo","notes":"Delivery condition: prehardened to 240–270 HB.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7730.0},"kind":"point","reported":{"significant_figures":4,"unit":"kg/m³","value":7730.0}},"source_id":"uddeholm-carmo","source_locator":{"label":"Page 4, Physical properties, 240–270 HB, row density at 200 °C","page":4},"state_id":"steel-uddeholm-carmo-hardened-and-tempered-240-270-hb","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":673.15},"id":"obs-3f1561652373a1fbde75","material_id":"steel-uddeholm-carmo","notes":"Delivery condition: prehardened to 240–270 HB.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7660.0},"kind":"point","reported":{"significant_figures":4,"unit":"kg/m³","value":7660.0}},"source_id":"uddeholm-carmo","source_locator":{"label":"Page 4, Physical properties, 240–270 HB, row density at 400 °C","page":4},"state_id":"steel-uddeholm-carmo-hardened-and-tempered-240-270-hb","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-989a2f5e02d9487e5121","material_id":"steel-uddeholm-carmo","notes":"Delivery condition: prehardened to 240–270 HB.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":204000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":204000.0}},"source_id":"uddeholm-carmo","source_locator":{"label":"Page 4, Physical properties, 240–270 HB, row youngs_modulus at 20 °C","page":4},"state_id":"steel-uddeholm-carmo-hardened-and-tempered-240-270-hb","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":473.15},"id":"obs-dd999043a964a30657bc","material_id":"steel-uddeholm-carmo","notes":"Delivery condition: prehardened to 240–270 HB.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":196000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":196000.0}},"source_id":"uddeholm-carmo","source_locator":{"label":"Page 4, Physical properties, 240–270 HB, row youngs_modulus at 200 °C","page":4},"state_id":"steel-uddeholm-carmo-hardened-and-tempered-240-270-hb","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":673.15},"id":"obs-0746ea4c5a3730550b4f","material_id":"steel-uddeholm-carmo","notes":"Delivery condition: prehardened to 240–270 HB.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":185000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":185000.0}},"source_id":"uddeholm-carmo","source_locator":{"label":"Page 4, Physical properties, 240–270 HB, row youngs_modulus at 400 °C","page":4},"state_id":"steel-uddeholm-carmo-hardened-and-tempered-240-270-hb","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-e1cfbde29cef493a798a","material_id":"steel-uddeholm-carmo","notes":"Delivery condition: prehardened to 240–270 HB.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":460.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·°C)","value":460.0}},"source_id":"uddeholm-carmo","source_locator":{"label":"Page 4, Physical properties, 240–270 HB, row specific_heat at 20 °C","page":4},"state_id":"steel-uddeholm-carmo-hardened-and-tempered-240-270-hb","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-b9799191b91115b51c86","material_id":"steel-uddeholm-carmo","notes":"Room temperature (not quantified); hardness 270 HB.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":870000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":870.0}},"source_id":"uddeholm-carmo","source_locator":{"label":"Page 4, Tensile properties at room temperature, 270 HB, row Tensile strength Rm","page":4},"state_id":"steel-uddeholm-carmo-hardened-and-tempered-270-hb","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm tabulated tensile properties"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-e83119f93b3a668471fe","material_id":"steel-uddeholm-carmo","notes":"Room temperature (not quantified); hardness 270 HB.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":670000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":670.0}},"source_id":"uddeholm-carmo","source_locator":{"label":"Page 4, Tensile properties at room temperature, 270 HB, row 0.2% proof strength Rp0.2","page":4},"state_id":"steel-uddeholm-carmo-hardened-and-tempered-270-hb","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm tabulated tensile properties"},"uncertainty":null},{"basis":"typical","conditions":{},"id":"obs-19f5200e3c0963d33172","material_id":"steel-uddeholm-carmo","notes":"Room temperature (not quantified); hardness 270 HB.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.15},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":15.0}},"source_id":"uddeholm-carmo","source_locator":{"label":"Page 4, Tensile properties at room temperature, 270 HB, row Elongation A5","page":4},"state_id":"steel-uddeholm-carmo-hardened-and-tempered-270-hb","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm tabulated tensile properties"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-c1c313d1bd68e41a2b16","material_id":"steel-uddeholm-caldie","notes":"Samples from the centre of 203 × 80 mm and diameter 102 mm bars; hardened at 1025 °C, vacuum gas quenched, tempered twice at 525 °C for 2 h; 60–61 HRC.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7820.0},"kind":"point","reported":{"significant_figures":4,"unit":"kg/m³","value":7820.0}},"source_id":"uddeholm-caldie","source_locator":{"label":"Page 3, Physical properties, 60–61 HRC, row density at 20 °C","page":3},"state_id":"steel-uddeholm-caldie-hardened-and-tempered-60-61-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-326a529287da24ed962c","material_id":"steel-uddeholm-caldie","notes":"Samples from the centre of 203 × 80 mm and diameter 102 mm bars; hardened at 1025 °C, vacuum gas quenched, tempered twice at 525 °C for 2 h; 60–61 HRC.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":213000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":213000.0}},"source_id":"uddeholm-caldie","source_locator":{"label":"Page 3, Physical properties, 60–61 HRC, row youngs_modulus at 20 °C","page":3},"state_id":"steel-uddeholm-caldie-hardened-and-tempered-60-61-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":473.15},"id":"obs-7b141a9cdc178dc009ae","material_id":"steel-uddeholm-caldie","notes":"Samples from the centre of 203 × 80 mm and diameter 102 mm bars; hardened at 1025 °C, vacuum gas quenched, tempered twice at 525 °C for 2 h; 60–61 HRC.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":192000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":192000.0}},"source_id":"uddeholm-caldie","source_locator":{"label":"Page 3, Physical properties, 60–61 HRC, row youngs_modulus at 200 °C","page":3},"state_id":"steel-uddeholm-caldie-hardened-and-tempered-60-61-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":673.15},"id":"obs-b588786d8d2471277a70","material_id":"steel-uddeholm-caldie","notes":"Samples from the centre of 203 × 80 mm and diameter 102 mm bars; hardened at 1025 °C, vacuum gas quenched, tempered twice at 525 °C for 2 h; 60–61 HRC.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":180000000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":180000.0}},"source_id":"uddeholm-caldie","source_locator":{"label":"Page 3, Physical properties, 60–61 HRC, row youngs_modulus at 400 °C","page":3},"state_id":"steel-uddeholm-caldie-hardened-and-tempered-60-61-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":473.15},"id":"obs-069e823345ed0c7ace4b","material_id":"steel-uddeholm-caldie","notes":"Samples from the centre of 203 × 80 mm and diameter 102 mm bars; hardened at 1025 °C, vacuum gas quenched, tempered twice at 525 °C for 2 h; 60–61 HRC.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":24.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·°C)","value":24.0}},"source_id":"uddeholm-caldie","source_locator":{"label":"Page 3, Physical properties, 60–61 HRC, row thermal_conductivity at 200 °C","page":3},"state_id":"steel-uddeholm-caldie-hardened-and-tempered-60-61-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":673.15},"id":"obs-bd21b4032a52100c0a22","material_id":"steel-uddeholm-caldie","notes":"Samples from the centre of 203 × 80 mm and diameter 102 mm bars; hardened at 1025 °C, vacuum gas quenched, tempered twice at 525 °C for 2 h; 60–61 HRC.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":28.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·°C)","value":28.0}},"source_id":"uddeholm-caldie","source_locator":{"label":"Page 3, Physical properties, 60–61 HRC, row thermal_conductivity at 400 °C","page":3},"state_id":"steel-uddeholm-caldie-hardened-and-tempered-60-61-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-d62391ad638cc756bf7d","material_id":"steel-uddeholm-caldie","notes":"Samples from the centre of 203 × 80 mm and diameter 102 mm bars; hardened at 1025 °C, vacuum gas quenched, tempered twice at 525 °C for 2 h; 60–61 HRC.","property_id":"specific_heat","result":{"canonical":{"unit":"J/(kg*K)","value":460.0},"kind":"point","reported":{"significant_figures":3,"unit":"J/(kg·°C)","value":460.0}},"source_id":"uddeholm-caldie","source_locator":{"label":"Page 3, Physical properties, 60–61 HRC, row specific_heat at 20 °C","page":3},"state_id":"steel-uddeholm-caldie-hardened-and-tempered-60-61-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-c5613b403bcfa3552957","material_id":"steel-uddeholm-dievar","notes":"Samples from the centre of a 610 × 203 mm bar; hardened at 1025 °C, oil quenched, tempered twice at 615 °C for 2 h; 44–46 HRC.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7800.0},"kind":"point","reported":{"significant_figures":4,"unit":"kg/m³","value":7800.0}},"source_id":"uddeholm-dievar","source_locator":{"label":"Page 4, Physical properties, 44–46 HRC, row density at 20 °C","page":4},"state_id":"steel-uddeholm-dievar-hardened-and-tempered-44-46-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":673.15},"id":"obs-c1489d4bb4b0b6624521","material_id":"steel-uddeholm-dievar","notes":"Samples from the centre of a 610 × 203 mm bar; hardened at 1025 °C, oil quenched, tempered twice at 615 °C for 2 h; 44–46 HRC.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7700.0},"kind":"point","reported":{"significant_figures":4,"unit":"kg/m³","value":7700.0}},"source_id":"uddeholm-dievar","source_locator":{"label":"Page 4, Physical properties, 44–46 HRC, row density at 400 °C","page":4},"state_id":"steel-uddeholm-dievar-hardened-and-tempered-44-46-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":873.15},"id":"obs-ace289b89bb770e3a8d2","material_id":"steel-uddeholm-dievar","notes":"Samples from the centre of a 610 × 203 mm bar; hardened at 1025 °C, oil quenched, tempered twice at 615 °C for 2 h; 44–46 HRC.","property_id":"density","result":{"canonical":{"unit":"kg/m^3","value":7600.0},"kind":"point","reported":{"significant_figures":4,"unit":"kg/m³","value":7600.0}},"source_id":"uddeholm-dievar","source_locator":{"label":"Page 4, Physical properties, 44–46 HRC, row density at 600 °C","page":4},"state_id":"steel-uddeholm-dievar-hardened-and-tempered-44-46-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":293.15},"id":"obs-c972dfd316f993af0baa","material_id":"steel-uddeholm-dievar","notes":"Samples from the centre of a 610 × 203 mm bar; hardened at 1025 °C, oil quenched, tempered twice at 615 °C for 2 h; 44–46 HRC.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":210000000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":210000.0}},"source_id":"uddeholm-dievar","source_locator":{"label":"Page 4, Physical properties, 44–46 HRC, row youngs_modulus at 20 °C","page":4},"state_id":"steel-uddeholm-dievar-hardened-and-tempered-44-46-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":673.15},"id":"obs-80e1b07e4f4885c991eb","material_id":"steel-uddeholm-dievar","notes":"Samples from the centre of a 610 × 203 mm bar; hardened at 1025 °C, oil quenched, tempered twice at 615 °C for 2 h; 44–46 HRC.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":180000000000.0},"kind":"point","reported":{"significant_figures":2,"unit":"MPa","value":180000.0}},"source_id":"uddeholm-dievar","source_locator":{"label":"Page 4, Physical properties, 44–46 HRC, row youngs_modulus at 400 °C","page":4},"state_id":"steel-uddeholm-dievar-hardened-and-tempered-44-46-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":873.15},"id":"obs-00fd5ecd10a7a1240984","material_id":"steel-uddeholm-dievar","notes":"Samples from the centre of a 610 × 203 mm bar; hardened at 1025 °C, oil quenched, tempered twice at 615 °C for 2 h; 44–46 HRC.","property_id":"youngs_modulus","result":{"canonical":{"unit":"Pa","value":145000000000.0},"kind":"point","reported":{"significant_figures":3,"unit":"MPa","value":145000.0}},"source_id":"uddeholm-dievar","source_locator":{"label":"Page 4, Physical properties, 44–46 HRC, row youngs_modulus at 600 °C","page":4},"state_id":"steel-uddeholm-dievar-hardened-and-tempered-44-46-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":673.15},"id":"obs-46bcdbd6e970352be623","material_id":"steel-uddeholm-dievar","notes":"Samples from the centre of a 610 × 203 mm bar; hardened at 1025 °C, oil quenched, tempered twice at 615 °C for 2 h; 44–46 HRC.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":31.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·°C)","value":31.0}},"source_id":"uddeholm-dievar","source_locator":{"label":"Page 4, Physical properties, 44–46 HRC, row thermal_conductivity at 400 °C","page":4},"state_id":"steel-uddeholm-dievar-hardened-and-tempered-44-46-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"temperature_K":873.15},"id":"obs-7cfeeae3853ddf32c410","material_id":"steel-uddeholm-dievar","notes":"Samples from the centre of a 610 × 203 mm bar; hardened at 1025 °C, oil quenched, tempered twice at 615 °C for 2 h; 44–46 HRC.","property_id":"thermal_conductivity","result":{"canonical":{"unit":"W/(m*K)","value":32.0},"kind":"point","reported":{"significant_figures":2,"unit":"W/(m·°C)","value":32.0}},"source_id":"uddeholm-dievar","source_locator":{"label":"Page 4, Physical properties, 44–46 HRC, row thermal_conductivity at 600 °C","page":4},"state_id":"steel-uddeholm-dievar-hardened-and-tempered-44-46-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm physical-property table"},"uncertainty":null},{"basis":"reference","conditions":{"orientation":"ST","product_form":"bar"},"id":"obs-8690b2a3b38e418ebbd8","material_id":"steel-uddeholm-dievar","notes":"Room temperature (not quantified); hardness 44 HRC. Samples from the centre of 610 × 203 mm bar; short transverse direction. Hardness-specific tempering cycles are not supplied in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":1480000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":1480.0}},"source_id":"uddeholm-dievar","source_locator":{"label":"Page 4, Tensile properties at room temperature, 44 HRC, row Tensile strength Rm","page":4},"state_id":"steel-uddeholm-dievar-hardened-and-tempered-44-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm tabulated tensile properties"},"uncertainty":null},{"basis":"reference","conditions":{"orientation":"ST","product_form":"bar"},"id":"obs-2329b90b9b13fca3399e","material_id":"steel-uddeholm-dievar","notes":"Room temperature (not quantified); hardness 44 HRC. Samples from the centre of 610 × 203 mm bar; short transverse direction. Hardness-specific tempering cycles are not supplied in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":1210000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":1210.0}},"source_id":"uddeholm-dievar","source_locator":{"label":"Page 4, Tensile properties at room temperature, 44 HRC, row 0.2% proof strength Rp0.2","page":4},"state_id":"steel-uddeholm-dievar-hardened-and-tempered-44-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm tabulated tensile properties"},"uncertainty":null},{"basis":"reference","conditions":{"orientation":"ST","product_form":"bar"},"id":"obs-2d9f6bb86b00a7e76e4d","material_id":"steel-uddeholm-dievar","notes":"Room temperature (not quantified); hardness 44 HRC. Samples from the centre of 610 × 203 mm bar; short transverse direction. Hardness-specific tempering cycles are not supplied in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.13},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":13.0}},"source_id":"uddeholm-dievar","source_locator":{"label":"Page 4, Tensile properties at room temperature, 44 HRC, row Elongation A5","page":4},"state_id":"steel-uddeholm-dievar-hardened-and-tempered-44-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm tabulated tensile properties"},"uncertainty":null},{"basis":"reference","conditions":{"orientation":"ST","product_form":"bar"},"id":"obs-860ad9c1c8bb660ef26e","material_id":"steel-uddeholm-dievar","notes":"Room temperature (not quantified); hardness 48 HRC. Samples from the centre of 610 × 203 mm bar; short transverse direction. Hardness-specific tempering cycles are not supplied in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":1640000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":1640.0}},"source_id":"uddeholm-dievar","source_locator":{"label":"Page 4, Tensile properties at room temperature, 48 HRC, row Tensile strength Rm","page":4},"state_id":"steel-uddeholm-dievar-hardened-and-tempered-48-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm tabulated tensile properties"},"uncertainty":null},{"basis":"reference","conditions":{"orientation":"ST","product_form":"bar"},"id":"obs-6ee6db66ecc4a3c82ebf","material_id":"steel-uddeholm-dievar","notes":"Room temperature (not quantified); hardness 48 HRC. Samples from the centre of 610 × 203 mm bar; short transverse direction. Hardness-specific tempering cycles are not supplied in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":1380000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":1380.0}},"source_id":"uddeholm-dievar","source_locator":{"label":"Page 4, Tensile properties at room temperature, 48 HRC, row 0.2% proof strength Rp0.2","page":4},"state_id":"steel-uddeholm-dievar-hardened-and-tempered-48-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm tabulated tensile properties"},"uncertainty":null},{"basis":"reference","conditions":{"orientation":"ST","product_form":"bar"},"id":"obs-49f178bc13e47f7033fa","material_id":"steel-uddeholm-dievar","notes":"Room temperature (not quantified); hardness 48 HRC. Samples from the centre of 610 × 203 mm bar; short transverse direction. Hardness-specific tempering cycles are not supplied in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.13},"kind":"point","reported":{"significant_figures":2,"unit":"%","value":13.0}},"source_id":"uddeholm-dievar","source_locator":{"label":"Page 4, Tensile properties at room temperature, 48 HRC, row Elongation A5","page":4},"state_id":"steel-uddeholm-dievar-hardened-and-tempered-48-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm tabulated tensile properties"},"uncertainty":null},{"basis":"reference","conditions":{"orientation":"ST","product_form":"bar"},"id":"obs-369629929ed1a9bf8ac7","material_id":"steel-uddeholm-dievar","notes":"Room temperature (not quantified); hardness 52 HRC. Samples from the centre of 610 × 203 mm bar; short transverse direction. Hardness-specific tempering cycles are not supplied in this table.","property_id":"ultimate_tensile_strength","result":{"canonical":{"unit":"Pa","value":1900000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":1900.0}},"source_id":"uddeholm-dievar","source_locator":{"label":"Page 4, Tensile properties at room temperature, 52 HRC, row Tensile strength Rm","page":4},"state_id":"steel-uddeholm-dievar-hardened-and-tempered-52-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm tabulated tensile properties"},"uncertainty":null},{"basis":"reference","conditions":{"orientation":"ST","product_form":"bar"},"id":"obs-652751ffce9317313275","material_id":"steel-uddeholm-dievar","notes":"Room temperature (not quantified); hardness 52 HRC. Samples from the centre of 610 × 203 mm bar; short transverse direction. Hardness-specific tempering cycles are not supplied in this table.","property_id":"tensile_yield_strength","result":{"canonical":{"unit":"Pa","value":1560000000.0},"kind":"point","reported":{"significant_figures":4,"unit":"MPa","value":1560.0}},"source_id":"uddeholm-dievar","source_locator":{"label":"Page 4, Tensile properties at room temperature, 52 HRC, row 0.2% proof strength Rp0.2","page":4},"state_id":"steel-uddeholm-dievar-hardened-and-tempered-52-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm tabulated tensile properties"},"uncertainty":null},{"basis":"reference","conditions":{"orientation":"ST","product_form":"bar"},"id":"obs-6f88d5afaaec5e1bb177","material_id":"steel-uddeholm-dievar","notes":"Room temperature (not quantified); hardness 52 HRC. Samples from the centre of 610 × 203 mm bar; short transverse direction. Hardness-specific tempering cycles are not supplied in this table.","property_id":"elongation_at_break","result":{"canonical":{"unit":"1","value":0.125},"kind":"point","reported":{"significant_figures":3,"unit":"%","value":12.5}},"source_id":"uddeholm-dievar","source_locator":{"label":"Page 4, Tensile properties at room temperature, 52 HRC, row Elongation A5","page":4},"state_id":"steel-uddeholm-dievar-hardened-and-tempered-52-hrc","status":"active","supersedes_observation_ids":[],"test_method":{"reported_label":"Uddeholm tabulated tensile properties"},"uncertainty":null}],"properties":[{"aliases":["0.2% proof stress","Fty","proof stress","yield","yield point","yield strength","yield stress"],"canonical_unit":"Pa","definition":"Stress at the specified onset of permanent tensile deformation. Basis and conditioned product geometry must be compared like-for-like.","id":"tensile_yield_strength","name":"Tensile yield strength","quantity_kind":"pressure"},{"aliases":["Ftu","UTS","tensile strength","ultimate strength"],"canonical_unit":"Pa","definition":"Maximum engineering tensile stress reached in a tensile test.","id":"ultimate_tensile_strength","name":"Ultimate tensile strength","quantity_kind":"pressure"},{"aliases":["E","MOE","elastic modulus","modulus of elasticity","stiffness","youngs modulus"],"canonical_unit":"Pa","definition":"Slope of the uniaxial elastic stress-strain response.","id":"youngs_modulus","name":"Young's modulus","quantity_kind":"pressure"},{"aliases":["density","mass density","rho","specific mass"],"canonical_unit":"kg/m^3","definition":"Mass per unit volume.","id":"density","name":"Density","quantity_kind":"mass_density"},{"aliases":["conductivity","heat conductivity","k","thermal conductivity","thermal k"],"canonical_unit":"W/(m*K)","definition":"Proportionality between conductive heat flux and temperature gradient.","id":"thermal_conductivity","name":"Thermal conductivity","quantity_kind":"thermal_conductivity"},{"aliases":["ductility","elongation","elongation at break","strain at break","tensile elongation"],"canonical_unit":"1","definition":"Engineering strain at fracture, stored as a fraction rather than percent.","id":"elongation_at_break","name":"Elongation at break","quantity_kind":"dimensionless"},{"aliases":["continuous use temperature","how hot can it get","max service temperature","max use temperature","service temperature"],"canonical_unit":"K","definition":"Application-dependent upper service temperature. Load, duration, atmosphere, and acceptance criterion are essential conditions.","id":"max_service_temperature","name":"Maximum service temperature","quantity_kind":"temperature"},{"aliases":["MOR","bending strength","flexural strength","modulus of rupture"],"canonical_unit":"Pa","definition":"Stress at failure in the cited bending test; distinguish from tensile strength.","id":"flexural_strength","name":"Flexural strength","quantity_kind":"pressure"},{"aliases":["heat capacity","specific heat"],"canonical_unit":"J/(kg*K)","definition":"Energy per unit mass and temperature change, at the reported temperature.","id":"specific_heat","name":"Specific heat capacity","quantity_kind":"specific_heat"},{"aliases":["nu","poisson","poissons ratio"],"canonical_unit":"1","definition":"Ratio of transverse contraction to axial extension in elastic loading.","id":"poissons_ratio","name":"Poisson’s ratio","quantity_kind":"ratio"}],"property_groups":[{"aliases":["strength"],"id":"strength","member_property_ids":["tensile_yield_strength","ultimate_tensile_strength","flexural_strength"],"name":"Strength"}],"sources":[{"id":"ensinger-manual","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","organization":"Ensinger","publication_date":null,"revision":"Snapshot 9b46c0ae1e72","source_type":"manufacturer_datasheet","title":"Stock shapes — Engineering plastics manual"},{"id":"coorstek","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","organization":"CoorsTek","publication_date":"2017","revision":"Snapshot 9de5bd60a1b8","source_type":"manufacturer_datasheet","title":"Ceramic Material Properties"},{"id":"outokumpu-core","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","organization":"Outokumpu","publication_date":null,"revision":"Snapshot 91d2f4b13405","source_type":"manufacturer_datasheet","title":"Core range datasheet"},{"id":"outokumpu-supra","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","organization":"Outokumpu","publication_date":null,"revision":"Snapshot 39e9860f4900","source_type":"manufacturer_datasheet","title":"Supra range datasheet"},{"id":"outokumpu-forta","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","organization":"Outokumpu","publication_date":null,"revision":"Snapshot 3283f08f406a","source_type":"manufacturer_datasheet","title":"Forta Duplex range datasheet"},{"id":"outokumpu-therma","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","organization":"Outokumpu","publication_date":null,"revision":"Snapshot 146c7dd9817a","source_type":"manufacturer_datasheet","title":"Therma range datasheet"},{"id":"outokumpu-ultra","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","organization":"Outokumpu","publication_date":null,"revision":"Snapshot 062d6a8d97e1","source_type":"manufacturer_datasheet","title":"Ultra range datasheet"},{"id":"hydro-1xxx","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","organization":"Hydro","publication_date":"2019-02","revision":"Snapshot 29d1d35c4512","source_type":"manufacturer_datasheet","title":"Alloy 1xxx datasheet"},{"id":"hydro-6005-6105","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","organization":"Hydro","publication_date":"2019-02","revision":"Snapshot 8cd88d53aa4b","source_type":"manufacturer_datasheet","title":"Alloy 6005/6105 datasheet"},{"id":"hydro-6005a","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","organization":"Hydro","publication_date":"2019-03","revision":"Snapshot fe225f0e18d2","source_type":"manufacturer_datasheet","title":"Alloy 6005A datasheet"},{"id":"hydro-6063","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","organization":"Hydro","publication_date":"2026-06","revision":"Snapshot 3a65ab041373","source_type":"manufacturer_datasheet","title":"Alloy 6063 datasheet"},{"id":"hydro-6042","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","organization":"Hydro","publication_date":"2019-02","revision":"Snapshot 9b15135ddb95","source_type":"manufacturer_datasheet","title":"Alloy 6042 datasheet"},{"id":"hydro-6082","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","organization":"Hydro","publication_date":"2019-03","revision":"Snapshot d7558e451216","source_type":"manufacturer_datasheet","title":"Alloy 6082 datasheet"},{"id":"hydro-6101","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","organization":"Hydro","publication_date":"2019-02","revision":"Snapshot 384ef3a688d9","source_type":"manufacturer_datasheet","title":"Alloy 6101 datasheet"},{"id":"hydro-6262","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","organization":"Hydro","publication_date":"2019-02","revision":"Snapshot 5f34fe9c786e","source_type":"manufacturer_datasheet","title":"Alloy 6262 datasheet"},{"id":"copper-alloys-guide","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","organization":"thyssenkrupp Materials NA — Copper and Brass Sales","publication_date":null,"revision":"Snapshot e0fcfa64e560","source_type":"supplier_catalog","title":"Copper and Alloys guide"},{"id":"timet-6-4","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","organization":"TIMET","publication_date":null,"revision":"Snapshot 824684f7d560","source_type":"manufacturer_datasheet","title":"TIMETAL 6-4, 6-4 ELI and 6-4-.1Ru datasheet"},{"id":"timet-6246","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","organization":"TIMET","publication_date":null,"revision":"Snapshot 3f1ec178c197","source_type":"manufacturer_datasheet","title":"TIMETAL 6-2-4-6 datasheet"},{"id":"atlas-engineering-bar","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","organization":"Atlas Specialty Metals","publication_date":"2005-01","revision":"Snapshot 93df7cb85e0e","source_type":"supplier_catalog","title":"Technical Handbook of Bar Products"},{"id":"uddeholm-arne","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","organization":"Uddeholm","publication_date":"2019-04","revision":"Snapshot 60cd5fd761dc","source_type":"manufacturer_datasheet","title":"Uddeholm Arne technical brochure"},{"id":"uddeholm-rigor","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","organization":"Uddeholm","publication_date":"2019-04","revision":"Snapshot 8035a04cbbcf","source_type":"manufacturer_datasheet","title":"Uddeholm Rigor technical brochure"},{"id":"uddeholm-sverker-21","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","organization":"Uddeholm","publication_date":"2019-04","revision":"Snapshot aa11ba6f506f","source_type":"manufacturer_datasheet","title":"Uddeholm Sverker 21 technical brochure"},{"id":"uddeholm-orvar-supreme","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","organization":"Uddeholm","publication_date":"2021-06","revision":"Snapshot 2455d6b678ca","source_type":"manufacturer_datasheet","title":"Uddeholm Orvar Supreme technical brochure"},{"id":"uddeholm-stavax-esr","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","organization":"Uddeholm","publication_date":"2026-05","revision":"Snapshot 361011f41662","source_type":"manufacturer_datasheet","title":"Uddeholm Stavax ESR technical brochure"},{"id":"uddeholm-carmo","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","organization":"Uddeholm","publication_date":"2019-10","revision":"Snapshot 63aa3d327b41","source_type":"manufacturer_datasheet","title":"Uddeholm Carmo technical brochure"},{"id":"uddeholm-caldie","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","organization":"Uddeholm","publication_date":"2022-03","revision":"Snapshot 4559a0bdec46","source_type":"manufacturer_datasheet","title":"Uddeholm Caldie technical brochure"},{"id":"uddeholm-dievar","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","organization":"Uddeholm","publication_date":"2026-09","revision":"Snapshot 5ac4869cfd1d","source_type":"manufacturer_datasheet","title":"Uddeholm Dievar technical brochure"},{"id":"hydro-6061-2019","license":"Manufacturer-published datasheet; textual attribution only; source document not redistributed.","organization":"Hydro","publication_date":"2019-01","revision":"2019/01","source_type":"manufacturer_datasheet","title":"Alloy 6061"}],"states":[{"aliases":["6061 T4","6061-T4","6061T4","AA6061-T4","Aluminium 6061-T4","EN AW-6061 T4"],"fixed_attributes":{"temper":"T4"},"id":"al-6061-t4","material_id":"al-6061","name":"T4","supplemental_taxon_ids":[]},{"aliases":["6061 T6","6061-T6","6061T6","AA6061-T6","Aluminium 6061-T6","EN AW-6061 T6"],"fixed_attributes":{"temper":"T6"},"id":"al-6061-t6","material_id":"al-6061","name":"T6","supplemental_taxon_ids":[]},{"aliases":["1.4301","304","Core 304/4301","S30400","Stainless steel Core 304/4301 — cold rolled sheet","austenitic","stainless"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-core-304-4301-reference","material_id":"stainless-core-304-4301","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1.4307","304L","Core 304L/4307","S30403","Stainless steel Core 304L/4307 — cold rolled sheet","austenitic","stainless"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-core-304l-4307-reference","material_id":"stainless-core-304l-4307","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1.4311","304LN","Core 304LN/4311","S30453","Stainless steel Core 304LN/4311 — cold rolled sheet","austenitic","stainless"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-core-304ln-4311-reference","material_id":"stainless-core-304ln-4311","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1.4306","304L","Core 304L/4306","S30403","Stainless steel Core 304L/4306 — cold rolled sheet","austenitic","stainless"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-core-304l-4306-reference","material_id":"stainless-core-304l-4306","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1.4303","305","Core 305/4303","S30500","Stainless steel Core 305/4303 — cold rolled sheet","austenitic","stainless"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-core-305-4303-reference","material_id":"stainless-core-305-4303","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1.4541","321","Core 321/4541","S32100","Stainless steel Core 321/4541 — cold rolled sheet","austenitic","stainless"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-core-321-4541-reference","material_id":"stainless-core-321-4541","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1.4550","347","Core 347/4550","S34700","Stainless steel Core 347/4550 — cold rolled sheet","austenitic","stainless"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-core-347-4550-reference","material_id":"stainless-core-347-4550","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1.4318","301LN","Core 301LN/4318","S30153","Stainless steel Core 301LN/4318 — cold rolled sheet","austenitic","stainless"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-core-301ln-4318-reference","material_id":"stainless-core-301ln-4318","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1.4310","301","Core 301/4310","S30100","Stainless steel Core 301/4310 — cold rolled sheet","austenitic","stainless"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-core-301-4310-reference","material_id":"stainless-core-301-4310","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1.4372","201","Core 201/4372","S20100","Stainless steel Core 201/4372 — cold rolled sheet","austenitic","stainless"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-core-201-4372-reference","material_id":"stainless-core-201-4372","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1.4372","201LN","Core 201LN/4372","S20153","Stainless steel Core 201LN/4372 — cold rolled sheet","austenitic","stainless"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-core-201ln-4372-reference","material_id":"stainless-core-201ln-4372","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1.4509","Core 441/4509","S43940","Stainless steel Core 441/4509 — cold rolled sheet","ferritic","stainless"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-core-441-4509-reference","material_id":"stainless-core-441-4509","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["439M","Core 439M","S43932","Stainless steel Core 439M — cold rolled sheet","ferritic","stainless"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-core-439m-reference","material_id":"stainless-core-439m","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1.4622","Core 4622","S44330","Stainless steel Core 4622 — cold rolled sheet","ferritic","stainless"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-core-4622-reference","material_id":"stainless-core-4622","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1.4401","316","Stainless steel Supra 316/4401 — cold rolled sheet","Supra 316/4401","austenitic","stainless"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-supra-316-4401-reference","material_id":"stainless-supra-316-4401","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1.4404","316L","Stainless steel Supra 316L/4404 — cold rolled sheet","Supra 316L/4404","austenitic","stainless"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-supra-316l-4404-reference","material_id":"stainless-supra-316l-4404","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1.4420","316plus","Stainless steel Supra 316plus — cold rolled sheet","Supra 316plus","austenitic","stainless"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-supra-316plus-reference","material_id":"stainless-supra-316plus","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1.4436","316","Stainless steel Supra 316/4436 — cold rolled sheet","Supra 316/4436","austenitic","stainless"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-supra-316-4436-reference","material_id":"stainless-supra-316-4436","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1.4432","316L","Stainless steel Supra 316L/4432 — cold rolled sheet","Supra 316L/4432","austenitic","stainless"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-supra-316l-4432-reference","material_id":"stainless-supra-316l-4432","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1.4435","316L","Stainless steel Supra 316L/4435 — cold rolled sheet","Supra 316L/4435","austenitic","stainless"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-supra-316l-4435-reference","material_id":"stainless-supra-316l-4435","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1.4571","316Ti","Stainless steel Supra 316Ti/4571 — cold rolled sheet","Supra 316Ti/4571","austenitic","stainless"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-supra-316ti-4571-reference","material_id":"stainless-supra-316ti-4571","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1.4521","444","Stainless steel Supra 444/4521 — cold rolled sheet","Supra 444/4521","ferritic","stainless"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-supra-444-4521-reference","material_id":"stainless-supra-444-4521","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1.4462","2205","DX 2205","Forta DX 2205","S32205","Stainless steel Forta DX 2205 — cold rolled coil","duplex"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-forta-dx-2205-reference","material_id":"stainless-forta-dx-2205","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1.4162","Forta LDX 2101","LDX 2101","S32101","Stainless steel Forta LDX 2101 — cold rolled coil","duplex"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-forta-ldx-2101-reference","material_id":"stainless-forta-ldx-2101","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1.4362","2304","DX 2304","Forta DX 2304","S32304","Stainless steel Forta DX 2304 — cold rolled coil","duplex"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-forta-dx-2304-reference","material_id":"stainless-forta-dx-2304","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1.4362","2304","EDX 2304","Forta EDX 2304","S32304","Stainless steel Forta EDX 2304 — cold rolled coil","duplex"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-forta-edx-2304-reference","material_id":"stainless-forta-edx-2304","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1.4662","Forta LDX 2404","LDX 2404","S82441","Stainless steel Forta LDX 2404 — cold rolled coil","duplex"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-forta-ldx-2404-reference","material_id":"stainless-forta-ldx-2404","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1.4501","Forta SDX 100","S32760","SDX 100","Stainless steel Forta SDX 100 — cold rolled coil","duplex"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-forta-sdx-100-reference","material_id":"stainless-forta-sdx-100","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1.4410","2507","Forta SDX 2507","S32750","SDX 2507","Stainless steel Forta SDX 2507 — cold rolled coil","duplex"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-forta-sdx-2507-reference","material_id":"stainless-forta-sdx-2507","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1.4539","904L","N08904","Stainless steel Ultra 904L — cold rolled","Ultra 904L"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-ultra-904l-reference","material_id":"stainless-ultra-904l","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1.4547","254 SMO","S31254","Stainless steel Ultra 254 SMO — cold rolled","Ultra 254 SMO"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-ultra-254-smo-reference","material_id":"stainless-ultra-254-smo","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["2.4858","Alloy 825","N08825","Nickel alloy Ultra Alloy 825 — cold rolled","Ultra Alloy 825"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"nickel-ultra-alloy-825-reference","material_id":"nickel-ultra-alloy-825","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["317L","S31703","Stainless steel Ultra 317L — cold rolled","Ultra 317L"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-ultra-317l-reference","material_id":"stainless-ultra-317l","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1.4529","6XN","N08367","N08926","N08926 / N08367","Stainless steel Ultra 6XN — cold rolled","Ultra 6XN"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-ultra-6xn-reference","material_id":"stainless-ultra-6xn","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1.4652","654 SMO","S32654","Stainless steel Ultra 654 SMO — cold rolled","Ultra 654 SMO"],"fixed_attributes":{"work_condition":"cold_rolled"},"id":"stainless-ultra-654-smo-reference","material_id":"stainless-ultra-654-smo","name":"Cold rolled","supplemental_taxon_ids":[]},{"aliases":["1060 O","1060-O","Aluminium 1060 — O"],"fixed_attributes":{"temper":"O"},"id":"al-1060-o","material_id":"al-1060","name":"O","supplemental_taxon_ids":[]},{"aliases":["1060 H112","1060-H112","Aluminium 1060 — H112"],"fixed_attributes":{"temper":"H112"},"id":"al-1060-h112","material_id":"al-1060","name":"H112","supplemental_taxon_ids":[]},{"aliases":["1100 O","1100-O","Aluminium 1100 — O"],"fixed_attributes":{"temper":"O"},"id":"al-1100-o","material_id":"al-1100","name":"O","supplemental_taxon_ids":[]},{"aliases":["1100 H112","1100-H112","Aluminium 1100 — H112"],"fixed_attributes":{"temper":"H112"},"id":"al-1100-h112","material_id":"al-1100","name":"H112","supplemental_taxon_ids":[]},{"aliases":["1350 H111","1350-H111","Aluminium 1350 — H111"],"fixed_attributes":{"temper":"H111"},"id":"al-1350-h111","material_id":"al-1350","name":"H111","supplemental_taxon_ids":[]},{"aliases":["6005 T1","6005-T1","Aluminium 6005 — T1"],"fixed_attributes":{"temper":"T1"},"id":"al-6005-t1","material_id":"al-6005","name":"T1","supplemental_taxon_ids":[]},{"aliases":["6005 T5","6005-T5","Aluminium 6005 — T5"],"fixed_attributes":{"temper":"T5"},"id":"al-6005-t5","material_id":"al-6005","name":"T5","supplemental_taxon_ids":[]},{"aliases":["6105 T1","6105-T1","Aluminium 6105 — T1"],"fixed_attributes":{"temper":"T1"},"id":"al-6105-t1","material_id":"al-6105","name":"T1","supplemental_taxon_ids":[]},{"aliases":["6105 T5","6105-T5","Aluminium 6105 — T5"],"fixed_attributes":{"temper":"T5"},"id":"al-6105-t5","material_id":"al-6105","name":"T5","supplemental_taxon_ids":[]},{"aliases":["6105 T6","6105-T6","Aluminium 6105 — T6"],"fixed_attributes":{"temper":"T6"},"id":"al-6105-t6","material_id":"al-6105","name":"T6","supplemental_taxon_ids":[]},{"aliases":["6005A T1","6005A-T1","Aluminium 6005A — T1"],"fixed_attributes":{"temper":"T1"},"id":"al-6005a-t1","material_id":"al-6005a","name":"T1","supplemental_taxon_ids":[]},{"aliases":["6005A T5","6005A-T5","Aluminium 6005A — T5"],"fixed_attributes":{"temper":"T5"},"id":"al-6005a-t5","material_id":"al-6005a","name":"T5","supplemental_taxon_ids":[]},{"aliases":["6005A T61","6005A-T61","Aluminium 6005A — T61"],"fixed_attributes":{"temper":"T61"},"id":"al-6005a-t61","material_id":"al-6005a","name":"T61","supplemental_taxon_ids":[]},{"aliases":["6063 T1","6063-T1","Aluminium 6063 — T1"],"fixed_attributes":{"temper":"T1"},"id":"al-6063-t1","material_id":"al-6063","name":"T1","supplemental_taxon_ids":[]},{"aliases":["6063 T4","6063-T4","Aluminium 6063 — T4"],"fixed_attributes":{"temper":"T4"},"id":"al-6063-t4","material_id":"al-6063","name":"T4","supplemental_taxon_ids":[]},{"aliases":["6063 T5","6063-T5","Aluminium 6063 — T5"],"fixed_attributes":{"temper":"T5"},"id":"al-6063-t5","material_id":"al-6063","name":"T5","supplemental_taxon_ids":[]},{"aliases":["6063 T6","6063-T6","Aluminium 6063 — T6"],"fixed_attributes":{"temper":"T6"},"id":"al-6063-t6","material_id":"al-6063","name":"T6","supplemental_taxon_ids":[]},{"aliases":["6042 T5","6042-T5","Aluminium 6042 — T5"],"fixed_attributes":{"temper":"T5"},"id":"al-6042-t5","material_id":"al-6042","name":"T5","supplemental_taxon_ids":[]},{"aliases":["6082 T5","6082-T5","Aluminium 6082 — T5"],"fixed_attributes":{"temper":"T5"},"id":"al-6082-t5","material_id":"al-6082","name":"T5","supplemental_taxon_ids":[]},{"aliases":["6082 T6","6082-T6","Aluminium 6082 — T6"],"fixed_attributes":{"temper":"T6"},"id":"al-6082-t6","material_id":"al-6082","name":"T6","supplemental_taxon_ids":[]},{"aliases":["6101 T6","6101-T6","Aluminium 6101 — T6"],"fixed_attributes":{"temper":"T6"},"id":"al-6101-t6","material_id":"al-6101","name":"T6","supplemental_taxon_ids":[]},{"aliases":["6101 T63","6101-T63","Aluminium 6101 — T63"],"fixed_attributes":{"temper":"T63"},"id":"al-6101-t63","material_id":"al-6101","name":"T63","supplemental_taxon_ids":[]},{"aliases":["6101 T64","6101-T64","Aluminium 6101 — T64"],"fixed_attributes":{"temper":"T64"},"id":"al-6101-t64","material_id":"al-6101","name":"T64","supplemental_taxon_ids":[]},{"aliases":["6262 T6","6262-T6","Aluminium 6262 — T6"],"fixed_attributes":{"temper":"T6"},"id":"al-6262-t6","material_id":"al-6262","name":"T6","supplemental_taxon_ids":[]},{"aliases":["Ti6Al4V mill annealed","Titanium Ti-6Al-4V — Mill annealed"],"fixed_attributes":{"heat_treatment":"annealed"},"id":"ti-6al-4v-mill-annealed","material_id":"ti-6al-4v","name":"Mill annealed","supplemental_taxon_ids":[]},{"aliases":["TIMETAL 6-2-4-6 DA","Ti6246 DA","Titanium Ti-6Al-2Sn-4Zr-6Mo — duplex annealed"],"fixed_attributes":{"heat_treatment":"annealed"},"id":"ti-6246-da","material_id":"ti-6al-2sn-4zr-6mo","name":"Duplex annealed","supplemental_taxon_ids":[]},{"aliases":["TIMETAL 6-2-4-6 STA","Ti6246 STA","Titanium Ti-6Al-2Sn-4Zr-6Mo — solution treated and aged"],"fixed_attributes":{"heat_treatment":"solution_treated_aged"},"id":"ti-6246-sta","material_id":"ti-6al-2sn-4zr-6mo","name":"Solution treated and aged","supplemental_taxon_ids":[]},{"aliases":["Atlas M1020","M1020","Steel Atlas M1020 — cold drawn"],"fixed_attributes":{"work_condition":"cold_drawn"},"id":"steel-atlas-m1020-reference","material_id":"steel-atlas-m1020","name":"Cold drawn","supplemental_taxon_ids":[]},{"aliases":["Atlas M1030","M1030","Steel Atlas M1030 — cold drawn"],"fixed_attributes":{"work_condition":"cold_drawn"},"id":"steel-atlas-m1030-reference","material_id":"steel-atlas-m1030","name":"Cold drawn","supplemental_taxon_ids":[]},{"aliases":["1045","Atlas 1045","Steel Atlas 1045 — cold drawn"],"fixed_attributes":{"work_condition":"cold_drawn"},"id":"steel-atlas-1045-reference","material_id":"steel-atlas-1045","name":"Cold drawn","supplemental_taxon_ids":[]},{"aliases":["1214","1214FM","Atlas 1214FM","Steel Atlas 1214FM — cold drawn"],"fixed_attributes":{"work_condition":"cold_drawn"},"id":"steel-atlas-1214fm-reference","material_id":"steel-atlas-1214fm","name":"Cold drawn","supplemental_taxon_ids":[]},{"aliases":["12L14","12L14FM","Atlas 12L14FM","Steel Atlas 12L14FM — cold drawn"],"fixed_attributes":{"work_condition":"cold_drawn"},"id":"steel-atlas-12l14fm-reference","material_id":"steel-atlas-12l14fm","name":"Cold drawn","supplemental_taxon_ids":[]},{"aliases":["4140","Atlas 4140","Steel Atlas 4140 — hardened and tempered"],"fixed_attributes":{"heat_treatment":"hardened_tempered"},"id":"steel-atlas-4140-reference","material_id":"steel-atlas-4140","name":"Hardened and tempered","supplemental_taxon_ids":[]},{"aliases":["1.6582","34CrNiMo6","6582","Atlas 6582","Steel Atlas 6582 — hardened and tempered"],"fixed_attributes":{"heat_treatment":"hardened_tempered"},"id":"steel-atlas-6582-reference","material_id":"steel-atlas-6582","name":"Hardened and tempered","supplemental_taxon_ids":[]},{"aliases":["4340","Atlas 4340","Steel Atlas 4340 — hardened and tempered"],"fixed_attributes":{"heat_treatment":"hardened_tempered"},"id":"steel-atlas-4340-reference","material_id":"steel-atlas-4340","name":"Hardened and tempered","supplemental_taxon_ids":[]},{"aliases":["1.6580","30CrNiMo8","6580","Atlas 6580","Steel Atlas 6580 — hardened and tempered"],"fixed_attributes":{"heat_treatment":"hardened_tempered"},"id":"steel-atlas-6580-reference","material_id":"steel-atlas-6580","name":"Hardened and tempered","supplemental_taxon_ids":[]},{"aliases":["8620H","Atlas 8620H","Steel Atlas 8620H — carburized, hardened and tempered"],"fixed_attributes":{"heat_treatment":"carburized_hardened_tempered"},"id":"steel-atlas-8620h-reference","material_id":"steel-atlas-8620h","name":"Carburized, hardened and tempered","supplemental_taxon_ids":[]},{"aliases":["1.6587","18CrNiMo7-6","6587","Atlas 6587","Steel Atlas 6587 — carburized, hardened and tempered"],"fixed_attributes":{"heat_treatment":"carburized_hardened_tempered"},"id":"steel-atlas-6587-reference","material_id":"steel-atlas-6587","name":"Carburized, hardened and tempered","supplemental_taxon_ids":[]},{"aliases":["1.6657","14NiCrMo13-4","6657","Atlas 6657","Steel Atlas 6657 — carburized, hardened and tempered"],"fixed_attributes":{"heat_treatment":"carburized_hardened_tempered"},"id":"steel-atlas-6657-reference","material_id":"steel-atlas-6657","name":"Carburized, hardened and tempered","supplemental_taxon_ids":[]},{"aliases":["1.1303","38MnSiVS5","Atlas Micro900","Micro900","Steel Atlas Micro900 — thermomechanically rolled"],"fixed_attributes":{"work_condition":"thermomechanically_rolled"},"id":"steel-atlas-micro900-reference","material_id":"steel-atlas-micro900","name":"Thermomechanically rolled","supplemental_taxon_ids":[]},{"aliases":["Arne hardened and tempered (62 HRC)","Uddeholm Arne — hardened and tempered (62 HRC)"],"fixed_attributes":{"hardness_condition":"62 HRC","heat_treatment":"hardened_tempered"},"id":"steel-uddeholm-arne-hardened-and-tempered-62-hrc","material_id":"steel-uddeholm-arne","name":"Hardened and tempered (62 HRC)","supplemental_taxon_ids":[]},{"aliases":["Rigor hardened and tempered (62 HRC)","Uddeholm Rigor — hardened and tempered (62 HRC)"],"fixed_attributes":{"hardness_condition":"62 HRC","heat_treatment":"hardened_tempered"},"id":"steel-uddeholm-rigor-hardened-and-tempered-62-hrc","material_id":"steel-uddeholm-rigor","name":"Hardened and tempered (62 HRC)","supplemental_taxon_ids":[]},{"aliases":["Sverker 21 hardened and tempered (62 HRC)","Uddeholm Sverker 21 — hardened and tempered (62 HRC)"],"fixed_attributes":{"hardness_condition":"62 HRC","heat_treatment":"hardened_tempered"},"id":"steel-uddeholm-sverker-21-hardened-and-tempered-62-hrc","material_id":"steel-uddeholm-sverker-21","name":"Hardened and tempered (62 HRC)","supplemental_taxon_ids":[]},{"aliases":["Orvar Supreme hardened and tempered (45 ± 1 HRC)","Uddeholm Orvar Supreme — hardened and tempered (45 ± 1 HRC)"],"fixed_attributes":{"hardness_condition":"45 ± 1 HRC","heat_treatment":"hardened_tempered"},"id":"steel-uddeholm-orvar-supreme-hardened-and-tempered-45-1-hrc","material_id":"steel-uddeholm-orvar-supreme","name":"Hardened and tempered (45 ± 1 HRC)","supplemental_taxon_ids":[]},{"aliases":["Orvar Supreme hardened and tempered (52 HRC)","Uddeholm Orvar Supreme — hardened and tempered (52 HRC)"],"fixed_attributes":{"hardness_condition":"52 HRC","heat_treatment":"hardened_tempered"},"id":"steel-uddeholm-orvar-supreme-hardened-and-tempered-52-hrc","material_id":"steel-uddeholm-orvar-supreme","name":"Hardened and tempered (52 HRC)","supplemental_taxon_ids":[]},{"aliases":["Orvar Supreme hardened and tempered (45 HRC)","Uddeholm Orvar Supreme — hardened and tempered (45 HRC)"],"fixed_attributes":{"hardness_condition":"45 HRC","heat_treatment":"hardened_tempered"},"id":"steel-uddeholm-orvar-supreme-hardened-and-tempered-45-hrc","material_id":"steel-uddeholm-orvar-supreme","name":"Hardened and tempered (45 HRC)","supplemental_taxon_ids":[]},{"aliases":["Stavax ESR hardened and tempered (50 HRC)","Uddeholm Stavax ESR — hardened and tempered (50 HRC)"],"fixed_attributes":{"hardness_condition":"50 HRC","heat_treatment":"hardened_tempered"},"id":"steel-uddeholm-stavax-esr-hardened-and-tempered-50-hrc","material_id":"steel-uddeholm-stavax-esr","name":"Hardened and tempered (50 HRC)","supplemental_taxon_ids":[]},{"aliases":["Stavax ESR hardened and tempered (45 HRC)","Uddeholm Stavax ESR — hardened and tempered (45 HRC)"],"fixed_attributes":{"hardness_condition":"45 HRC","heat_treatment":"hardened_tempered"},"id":"steel-uddeholm-stavax-esr-hardened-and-tempered-45-hrc","material_id":"steel-uddeholm-stavax-esr","name":"Hardened and tempered (45 HRC)","supplemental_taxon_ids":[]},{"aliases":["Carmo hardened and tempered (240–270 HB)","Uddeholm Carmo — hardened and tempered (240–270 HB)"],"fixed_attributes":{"hardness_condition":"240–270 HB","heat_treatment":"hardened_tempered"},"id":"steel-uddeholm-carmo-hardened-and-tempered-240-270-hb","material_id":"steel-uddeholm-carmo","name":"Hardened and tempered (240–270 HB)","supplemental_taxon_ids":[]},{"aliases":["Carmo hardened and tempered (270 HB)","Uddeholm Carmo — hardened and tempered (270 HB)"],"fixed_attributes":{"hardness_condition":"270 HB","heat_treatment":"hardened_tempered"},"id":"steel-uddeholm-carmo-hardened-and-tempered-270-hb","material_id":"steel-uddeholm-carmo","name":"Hardened and tempered (270 HB)","supplemental_taxon_ids":[]},{"aliases":["Caldie hardened and tempered (60–61 HRC)","Uddeholm Caldie — hardened and tempered (60–61 HRC)"],"fixed_attributes":{"hardness_condition":"60–61 HRC","heat_treatment":"hardened_tempered"},"id":"steel-uddeholm-caldie-hardened-and-tempered-60-61-hrc","material_id":"steel-uddeholm-caldie","name":"Hardened and tempered (60–61 HRC)","supplemental_taxon_ids":[]},{"aliases":["Dievar hardened and tempered (44–46 HRC)","Uddeholm Dievar — hardened and tempered (44–46 HRC)"],"fixed_attributes":{"hardness_condition":"44–46 HRC","heat_treatment":"hardened_tempered"},"id":"steel-uddeholm-dievar-hardened-and-tempered-44-46-hrc","material_id":"steel-uddeholm-dievar","name":"Hardened and tempered (44–46 HRC)","supplemental_taxon_ids":[]},{"aliases":["Dievar hardened and tempered (44 HRC)","Uddeholm Dievar — hardened and tempered (44 HRC)"],"fixed_attributes":{"hardness_condition":"44 HRC","heat_treatment":"hardened_tempered"},"id":"steel-uddeholm-dievar-hardened-and-tempered-44-hrc","material_id":"steel-uddeholm-dievar","name":"Hardened and tempered (44 HRC)","supplemental_taxon_ids":[]},{"aliases":["Dievar hardened and tempered (48 HRC)","Uddeholm Dievar — hardened and tempered (48 HRC)"],"fixed_attributes":{"hardness_condition":"48 HRC","heat_treatment":"hardened_tempered"},"id":"steel-uddeholm-dievar-hardened-and-tempered-48-hrc","material_id":"steel-uddeholm-dievar","name":"Hardened and tempered (48 HRC)","supplemental_taxon_ids":[]},{"aliases":["Dievar hardened and tempered (52 HRC)","Uddeholm Dievar — hardened and tempered (52 HRC)"],"fixed_attributes":{"hardness_condition":"52 HRC","heat_treatment":"hardened_tempered"},"id":"steel-uddeholm-dievar-hardened-and-tempered-52-hrc","material_id":"steel-uddeholm-dievar","name":"Hardened and tempered (52 HRC)","supplemental_taxon_ids":[]}],"taxa":[{"aliases":["metal","metallic materials"],"id":"metals","name":"Metals","primary_parent_id":null,"supplemental_broader_ids":[]},{"aliases":["al alloys","aluminium","aluminum","aluminum alloys"],"id":"aluminium-alloys","name":"Aluminium alloys","primary_parent_id":"metals","supplemental_broader_ids":[]},{"aliases":["engineering polymers","high performance plastics","plastic","plastics","polymer","polymers","technical plastics"],"id":"engineering-plastics","name":"Engineering plastics","primary_parent_id":null,"supplemental_broader_ids":[]},{"aliases":["stainless","stainless steel"],"id":"stainless-steels","name":"Stainless steels","primary_parent_id":"steels","supplemental_broader_ids":[]},{"aliases":["ceramic"],"id":"ceramics","name":"Technical ceramics","primary_parent_id":null,"supplemental_broader_ids":[]},{"aliases":["ABS","Acrylonitrile butadiene styrene"],"id":"polymer-abs","name":"Acrylonitrile butadiene styrene (ABS)","primary_parent_id":"engineering-plastics","supplemental_broader_ids":[]},{"aliases":["PPE","Polyphenylene ether"],"id":"polymer-ppe","name":"Polyphenylene ether (PPE)","primary_parent_id":"engineering-plastics","supplemental_broader_ids":[]},{"aliases":["PMP","Polymethylpentene"],"id":"polymer-pmp","name":"Polymethylpentene (PMP)","primary_parent_id":"engineering-plastics","supplemental_broader_ids":[]},{"aliases":["PP","Polypropylene"],"id":"polymer-pp","name":"Polypropylene (PP)","primary_parent_id":"engineering-plastics","supplemental_broader_ids":[]},{"aliases":["Acetal copolymer","POM-C"],"id":"polymer-pom-c","name":"Acetal copolymer (POM-C)","primary_parent_id":"engineering-plastics","supplemental_broader_ids":[]},{"aliases":["Acetal homopolymer","POM-H"],"id":"polymer-pom-h","name":"Acetal homopolymer (POM-H)","primary_parent_id":"engineering-plastics","supplemental_broader_ids":[]},{"aliases":["Nylon 6","PA6"],"id":"polymer-pa6","name":"Nylon 6 (PA6)","primary_parent_id":"engineering-plastics","supplemental_broader_ids":[]},{"aliases":["Nylon 66","PA66"],"id":"polymer-pa66","name":"Nylon 66 (PA66)","primary_parent_id":"engineering-plastics","supplemental_broader_ids":[]},{"aliases":["Nylon 46","PA46"],"id":"polymer-pa46","name":"Nylon 46 (PA46)","primary_parent_id":"engineering-plastics","supplemental_broader_ids":[]},{"aliases":["Nylon 12","PA12"],"id":"polymer-pa12","name":"Nylon 12 (PA12)","primary_parent_id":"engineering-plastics","supplemental_broader_ids":[]},{"aliases":["PET","Polyethylene terephthalate"],"id":"polymer-pet","name":"Polyethylene terephthalate (PET)","primary_parent_id":"engineering-plastics","supplemental_broader_ids":[]},{"aliases":["PBT","Polybutylene terephthalate"],"id":"polymer-pbt","name":"Polybutylene terephthalate (PBT)","primary_parent_id":"engineering-plastics","supplemental_broader_ids":[]},{"aliases":["PC","Polycarbonate"],"id":"polymer-pc","name":"Polycarbonate (PC)","primary_parent_id":"engineering-plastics","supplemental_broader_ids":[]},{"aliases":["PVDF","Polyvinylidene fluoride"],"id":"polymer-pvdf","name":"Polyvinylidene fluoride (PVDF)","primary_parent_id":"engineering-plastics","supplemental_broader_ids":[]},{"aliases":["PSU","Polysulfone"],"id":"polymer-psu","name":"Polysulfone (PSU)","primary_parent_id":"engineering-plastics","supplemental_broader_ids":[]},{"aliases":["PEI","Polyetherimide"],"id":"polymer-pei","name":"Polyetherimide (PEI)","primary_parent_id":"engineering-plastics","supplemental_broader_ids":[]},{"aliases":["PPSU","Polyphenylsulfone"],"id":"polymer-ppsu","name":"Polyphenylsulfone (PPSU)","primary_parent_id":"engineering-plastics","supplemental_broader_ids":[]},{"aliases":["PPS","Polyphenylene sulfide"],"id":"polymer-pps","name":"Polyphenylene sulfide (PPS)","primary_parent_id":"engineering-plastics","supplemental_broader_ids":[]},{"aliases":["PEEK","Polyether ether ketone"],"id":"polymer-peek","name":"Polyether ether ketone (PEEK)","primary_parent_id":"engineering-plastics","supplemental_broader_ids":[]},{"aliases":["PEK","Polyetherketone"],"id":"polymer-pek","name":"Polyetherketone (PEK)","primary_parent_id":"engineering-plastics","supplemental_broader_ids":[]},{"aliases":["PEKEKK","Polyetherketoneetherketoneketone"],"id":"polymer-pekekk","name":"Polyetherketoneetherketoneketone (PEKEKK)","primary_parent_id":"engineering-plastics","supplemental_broader_ids":[]},{"aliases":["PEKK","Polyetherketoneketone"],"id":"polymer-pekk","name":"Polyetherketoneketone (PEKK)","primary_parent_id":"engineering-plastics","supplemental_broader_ids":[]},{"aliases":["PAI","Polyamide-imide"],"id":"polymer-pai","name":"Polyamide-imide (PAI)","primary_parent_id":"engineering-plastics","supplemental_broader_ids":[]},{"aliases":["PI","Polyimide"],"id":"polymer-pi","name":"Polyimide (PI)","primary_parent_id":"engineering-plastics","supplemental_broader_ids":[]},{"aliases":["PTFE","Polytetrafluoroethylene"],"id":"polymer-ptfe","name":"Polytetrafluoroethylene (PTFE)","primary_parent_id":"engineering-plastics","supplemental_broader_ids":[]},{"aliases":["nickel","nickel alloy"],"id":"nickel-alloys","name":"Nickel alloys","primary_parent_id":"metals","supplemental_broader_ids":[]},{"aliases":["copper","copper alloys"],"id":"copper-alloys","name":"Copper and copper alloys","primary_parent_id":"metals","supplemental_broader_ids":[]},{"aliases":["brass"],"id":"brasses","name":"Brasses","primary_parent_id":"copper-alloys","supplemental_broader_ids":[]},{"aliases":["bronze"],"id":"bronzes","name":"Bronzes","primary_parent_id":"copper-alloys","supplemental_broader_ids":[]},{"aliases":["titanium","titanium alloy"],"id":"titanium-alloys","name":"Titanium alloys","primary_parent_id":"metals","supplemental_broader_ids":[]},{"aliases":["steel","steels"],"id":"steels","name":"Steels","primary_parent_id":"metals","supplemental_broader_ids":[]},{"aliases":["carbon steel","carbon steels","free machining steel"],"id":"carbon-steels","name":"Carbon steels","primary_parent_id":"steels","supplemental_broader_ids":[]},{"aliases":["alloy steel","alloy steels"],"id":"alloy-steels","name":"Alloy steels","primary_parent_id":"steels","supplemental_broader_ids":[]},{"aliases":["case hardening steel","case hardening steels"],"id":"case-hardening-steels","name":"Case-hardening steels","primary_parent_id":"alloy-steels","supplemental_broader_ids":[]},{"aliases":["tool steel","tool steels"],"id":"tool-steels","name":"Tool steels","primary_parent_id":"steels","supplemental_broader_ids":[]}]},"citation_details":{"legacy_targets":{"al-1060":{"material":"al-1060"},"al-1060-h112":{"material":"al-1060","state":"al-1060-h112"},"al-1060-o":{"material":"al-1060","state":"al-1060-o"},"al-1060-reference":{"material":"al-1060"},"al-1100":{"material":"al-1100"},"al-1100-h112":{"material":"al-1100","state":"al-1100-h112"},"al-1100-o":{"material":"al-1100","state":"al-1100-o"},"al-1100-reference":{"material":"al-1100"},"al-1350":{"material":"al-1350"},"al-1350-h111":{"material":"al-1350","state":"al-1350-h111"},"al-1350-reference":{"material":"al-1350"},"al-6005":{"material":"al-6005"},"al-6005-reference":{"material":"al-6005"},"al-6005-t1":{"material":"al-6005","state":"al-6005-t1"},"al-6005-t5":{"material":"al-6005","state":"al-6005-t5"},"al-6005a":{"material":"al-6005a"},"al-6005a-reference":{"material":"al-6005a"},"al-6005a-t1":{"material":"al-6005a","state":"al-6005a-t1"},"al-6005a-t5":{"material":"al-6005a","state":"al-6005a-t5"},"al-6005a-t61":{"material":"al-6005a","state":"al-6005a-t61"},"al-6042":{"material":"al-6042"},"al-6042-reference":{"material":"al-6042"},"al-6042-t5":{"material":"al-6042","state":"al-6042-t5"},"al-6061":{"material":"al-6061"},"al-6061-t4":{"material":"al-6061","state":"al-6061-t4"},"al-6061-t6":{"material":"al-6061","state":"al-6061-t6"},"al-6063":{"material":"al-6063"},"al-6063-reference":{"material":"al-6063"},"al-6063-t1":{"material":"al-6063","state":"al-6063-t1"},"al-6063-t4":{"material":"al-6063","state":"al-6063-t4"},"al-6063-t5":{"material":"al-6063","state":"al-6063-t5"},"al-6063-t6":{"material":"al-6063","state":"al-6063-t6"},"al-6082":{"material":"al-6082"},"al-6082-reference":{"material":"al-6082"},"al-6082-t5":{"material":"al-6082","state":"al-6082-t5"},"al-6082-t6":{"material":"al-6082","state":"al-6082-t6"},"al-6101":{"material":"al-6101"},"al-6101-reference":{"material":"al-6101"},"al-6101-t6":{"material":"al-6101","state":"al-6101-t6"},"al-6101-t63":{"material":"al-6101","state":"al-6101-t63"},"al-6101-t64":{"material":"al-6101","state":"al-6101-t64"},"al-6105":{"material":"al-6105"},"al-6105-reference":{"material":"al-6105"},"al-6105-t1":{"material":"al-6105","state":"al-6105-t1"},"al-6105-t5":{"material":"al-6105","state":"al-6105-t5"},"al-6105-t6":{"material":"al-6105","state":"al-6105-t6"},"al-6262":{"material":"al-6262"},"al-6262-reference":{"material":"al-6262"},"al-6262-t6":{"material":"al-6262","state":"al-6262-t6"},"alloy-steels":{"category":"alloy-steels"},"aluminium-alloys":{"category":"aluminium-alloys"},"brasses":{"category":"brasses"},"bronzes":{"category":"bronzes"},"carbon-steels":{"category":"carbon-steels"},"case-hardening-steels":{"category":"case-hardening-steels"},"ceramics":{"category":"ceramics"},"coorstek-ad-85":{"material":"coorstek-ad-85"},"coorstek-ad-85-reference":{"material":"coorstek-ad-85"},"coorstek-ad-90":{"material":"coorstek-ad-90"},"coorstek-ad-90-reference":{"material":"coorstek-ad-90"},"coorstek-ad-94":{"material":"coorstek-ad-94"},"coorstek-ad-94-reference":{"material":"coorstek-ad-94"},"coorstek-ad-96":{"material":"coorstek-ad-96"},"coorstek-ad-96-reference":{"material":"coorstek-ad-96"},"coorstek-ad-995":{"material":"coorstek-ad-995"},"coorstek-ad-995-reference":{"material":"coorstek-ad-995"},"coorstek-cordierite":{"material":"coorstek-cordierite"},"coorstek-cordierite-reference":{"material":"coorstek-cordierite"},"coorstek-dura-z-ttz":{"material":"coorstek-dura-z-ttz"},"coorstek-dura-z-ttz-reference":{"material":"coorstek-dura-z-ttz"},"coorstek-esd-alumina":{"material":"coorstek-esd-alumina"},"coorstek-esd-alumina-reference":{"material":"coorstek-esd-alumina"},"coorstek-fg-995":{"material":"coorstek-fg-995"},"coorstek-fg-995-reference":{"material":"coorstek-fg-995"},"coorstek-hp-aln":{"material":"coorstek-hp-aln"},"coorstek-hp-aln-reference":{"material":"coorstek-hp-aln"},"coorstek-hpb4c":{"material":"coorstek-hpb4c"},"coorstek-hpb4c-reference":{"material":"coorstek-hpb4c"},"coorstek-mullite":{"material":"coorstek-mullite"},"coorstek-mullite-reference":{"material":"coorstek-mullite"},"coorstek-nbd-200":{"material":"coorstek-nbd-200"},"coorstek-nbd-200-reference":{"material":"coorstek-nbd-200"},"coorstek-nt-154":{"material":"coorstek-nt-154"},"coorstek-nt-154-reference":{"material":"coorstek-nt-154"},"coorstek-plasmapure-ad-998":{"material":"coorstek-plasmapure-ad-998"},"coorstek-plasmapure-ad-998-reference":{"material":"coorstek-plasmapure-ad-998"},"coorstek-plasmapure-uc":{"material":"coorstek-plasmapure-uc"},"coorstek-plasmapure-uc-reference":{"material":"coorstek-plasmapure-uc"},"coorstek-porcelain":{"material":"coorstek-porcelain"},"coorstek-porcelain-reference":{"material":"coorstek-porcelain"},"coorstek-puresic-cvd":{"material":"coorstek-puresic-cvd"},"coorstek-puresic-cvd-reference":{"material":"coorstek-puresic-cvd"},"coorstek-rbb4c":{"material":"coorstek-rbb4c"},"coorstek-rbb4c-reference":{"material":"coorstek-rbb4c"},"coorstek-sc-rb-sc-2":{"material":"coorstek-sc-rb-sc-2"},"coorstek-sc-rb-sc-2-reference":{"material":"coorstek-sc-rb-sc-2"},"coorstek-sn-101c":{"material":"coorstek-sn-101c"},"coorstek-sn-101c-reference":{"material":"coorstek-sn-101c"},"coorstek-steatite":{"material":"coorstek-steatite"},"coorstek-steatite-reference":{"material":"coorstek-steatite"},"coorstek-ultrasic-sc-30":{"material":"coorstek-ultrasic-sc-30"},"coorstek-ultrasic-sc-30-reference":{"material":"coorstek-ultrasic-sc-30"},"coorstek-wc-aci-ni6":{"material":"coorstek-wc-aci-ni6"},"coorstek-wc-aci-ni6-reference":{"material":"coorstek-wc-aci-ni6"},"coorstek-ytzp-hiped":{"material":"coorstek-ytzp-hiped"},"coorstek-ytzp-hiped-reference":{"material":"coorstek-ytzp-hiped"},"coorstek-ytzp-sintered":{"material":"coorstek-ytzp-sintered"},"coorstek-ytzp-sintered-reference":{"material":"coorstek-ytzp-sintered"},"coorstek-zta-10":{"material":"coorstek-zta-10"},"coorstek-zta-10-reference":{"material":"coorstek-zta-10"},"copper-alloys":{"category":"copper-alloys"},"cu-c10100":{"material":"cu-c10100"},"cu-c10100-reference":{"material":"cu-c10100"},"cu-c10200":{"material":"cu-c10200"},"cu-c10200-reference":{"material":"cu-c10200"},"cu-c11000":{"material":"cu-c11000"},"cu-c11000-reference":{"material":"cu-c11000"},"cu-c12200":{"material":"cu-c12200"},"cu-c12200-reference":{"material":"cu-c12200"},"cu-c14300":{"material":"cu-c14300"},"cu-c14300-reference":{"material":"cu-c14300"},"cu-c14500":{"material":"cu-c14500"},"cu-c14500-reference":{"material":"cu-c14500"},"cu-c17200":{"material":"cu-c17200"},"cu-c17200-reference":{"material":"cu-c17200"},"cu-c17300":{"material":"cu-c17300"},"cu-c17300-reference":{"material":"cu-c17300"},"cu-c17510":{"material":"cu-c17510"},"cu-c17510-reference":{"material":"cu-c17510"},"cu-c18000":{"material":"cu-c18000"},"cu-c18000-reference":{"material":"cu-c18000"},"cu-c18200":{"material":"cu-c18200"},"cu-c18200-reference":{"material":"cu-c18200"},"cu-c18700":{"material":"cu-c18700"},"cu-c18700-reference":{"material":"cu-c18700"},"cu-c21000":{"material":"cu-c21000"},"cu-c21000-reference":{"material":"cu-c21000"},"cu-c22000":{"material":"cu-c22000"},"cu-c22000-reference":{"material":"cu-c22000"},"cu-c23000":{"material":"cu-c23000"},"cu-c23000-reference":{"material":"cu-c23000"},"cu-c26000":{"material":"cu-c26000"},"cu-c26000-reference":{"material":"cu-c26000"},"cu-c28000":{"material":"cu-c28000"},"cu-c28000-reference":{"material":"cu-c28000"},"cu-c33000":{"material":"cu-c33000"},"cu-c33000-reference":{"material":"cu-c33000"},"cu-c35300":{"material":"cu-c35300"},"cu-c35300-reference":{"material":"cu-c35300"},"cu-c36000":{"material":"cu-c36000"},"cu-c36000-reference":{"material":"cu-c36000"},"cu-c36500":{"material":"cu-c36500"},"cu-c36500-reference":{"material":"cu-c36500"},"cu-c38500":{"material":"cu-c38500"},"cu-c38500-reference":{"material":"cu-c38500"},"cu-c46400":{"material":"cu-c46400"},"cu-c46400-reference":{"material":"cu-c46400"},"cu-c48500":{"material":"cu-c48500"},"cu-c48500-reference":{"material":"cu-c48500"},"cu-c51000":{"material":"cu-c51000"},"cu-c51000-reference":{"material":"cu-c51000"},"cu-c54400":{"material":"cu-c54400"},"cu-c54400-reference":{"material":"cu-c54400"},"cu-c64200":{"material":"cu-c64200"},"cu-c64200-reference":{"material":"cu-c64200"},"cu-c65500":{"material":"cu-c65500"},"cu-c65500-reference":{"material":"cu-c65500"},"cu-c71500":{"material":"cu-c71500"},"cu-c71500-reference":{"material":"cu-c71500"},"cu-c75200":{"material":"cu-c75200"},"cu-c75200-reference":{"material":"cu-c75200"},"engineering-plastics":{"category":"engineering-plastics"},"metals":{"category":"metals"},"nickel-alloys":{"category":"nickel-alloys"},"nickel-ultra-alloy-825":{"material":"nickel-ultra-alloy-825"},"nickel-ultra-alloy-825-reference":{"material":"nickel-ultra-alloy-825","state":"nickel-ultra-alloy-825-reference"},"polymer-abs":{"category":"polymer-abs"},"polymer-pa12":{"category":"polymer-pa12"},"polymer-pa46":{"category":"polymer-pa46"},"polymer-pa6":{"category":"polymer-pa6"},"polymer-pa66":{"category":"polymer-pa66"},"polymer-pai":{"category":"polymer-pai"},"polymer-pbt":{"category":"polymer-pbt"},"polymer-pc":{"category":"polymer-pc"},"polymer-peek":{"category":"polymer-peek"},"polymer-pei":{"category":"polymer-pei"},"polymer-pek":{"category":"polymer-pek"},"polymer-pekekk":{"category":"polymer-pekekk"},"polymer-pekk":{"category":"polymer-pekk"},"polymer-pet":{"category":"polymer-pet"},"polymer-pi":{"category":"polymer-pi"},"polymer-pmp":{"category":"polymer-pmp"},"polymer-pom-c":{"category":"polymer-pom-c"},"polymer-pom-h":{"category":"polymer-pom-h"},"polymer-pp":{"category":"polymer-pp"},"polymer-ppe":{"category":"polymer-ppe"},"polymer-pps":{"category":"polymer-pps"},"polymer-ppsu":{"category":"polymer-ppsu"},"polymer-psu":{"category":"polymer-psu"},"polymer-ptfe":{"category":"polymer-ptfe"},"polymer-pvdf":{"category":"polymer-pvdf"},"stainless-core-201-4372":{"material":"stainless-core-201-4372"},"stainless-core-201-4372-reference":{"material":"stainless-core-201-4372","state":"stainless-core-201-4372-reference"},"stainless-core-201ln-4372":{"material":"stainless-core-201ln-4372"},"stainless-core-201ln-4372-reference":{"material":"stainless-core-201ln-4372","state":"stainless-core-201ln-4372-reference"},"stainless-core-301-4310":{"material":"stainless-core-301-4310"},"stainless-core-301-4310-reference":{"material":"stainless-core-301-4310","state":"stainless-core-301-4310-reference"},"stainless-core-301ln-4318":{"material":"stainless-core-301ln-4318"},"stainless-core-301ln-4318-reference":{"material":"stainless-core-301ln-4318","state":"stainless-core-301ln-4318-reference"},"stainless-core-304-4301":{"material":"stainless-core-304-4301"},"stainless-core-304-4301-reference":{"material":"stainless-core-304-4301","state":"stainless-core-304-4301-reference"},"stainless-core-304l-4306":{"material":"stainless-core-304l-4306"},"stainless-core-304l-4306-reference":{"material":"stainless-core-304l-4306","state":"stainless-core-304l-4306-reference"},"stainless-core-304l-4307":{"material":"stainless-core-304l-4307"},"stainless-core-304l-4307-reference":{"material":"stainless-core-304l-4307","state":"stainless-core-304l-4307-reference"},"stainless-core-304ln-4311":{"material":"stainless-core-304ln-4311"},"stainless-core-304ln-4311-reference":{"material":"stainless-core-304ln-4311","state":"stainless-core-304ln-4311-reference"},"stainless-core-305-4303":{"material":"stainless-core-305-4303"},"stainless-core-305-4303-reference":{"material":"stainless-core-305-4303","state":"stainless-core-305-4303-reference"},"stainless-core-321-4541":{"material":"stainless-core-321-4541"},"stainless-core-321-4541-reference":{"material":"stainless-core-321-4541","state":"stainless-core-321-4541-reference"},"stainless-core-347-4550":{"material":"stainless-core-347-4550"},"stainless-core-347-4550-reference":{"material":"stainless-core-347-4550","state":"stainless-core-347-4550-reference"},"stainless-core-439m":{"material":"stainless-core-439m"},"stainless-core-439m-reference":{"material":"stainless-core-439m","state":"stainless-core-439m-reference"},"stainless-core-441-4509":{"material":"stainless-core-441-4509"},"stainless-core-441-4509-reference":{"material":"stainless-core-441-4509","state":"stainless-core-441-4509-reference"},"stainless-core-4622":{"material":"stainless-core-4622"},"stainless-core-4622-reference":{"material":"stainless-core-4622","state":"stainless-core-4622-reference"},"stainless-forta-dx-2205":{"material":"stainless-forta-dx-2205"},"stainless-forta-dx-2205-reference":{"material":"stainless-forta-dx-2205","state":"stainless-forta-dx-2205-reference"},"stainless-forta-dx-2304":{"material":"stainless-forta-dx-2304"},"stainless-forta-dx-2304-reference":{"material":"stainless-forta-dx-2304","state":"stainless-forta-dx-2304-reference"},"stainless-forta-edx-2304":{"material":"stainless-forta-edx-2304"},"stainless-forta-edx-2304-reference":{"material":"stainless-forta-edx-2304","state":"stainless-forta-edx-2304-reference"},"stainless-forta-ldx-2101":{"material":"stainless-forta-ldx-2101"},"stainless-forta-ldx-2101-reference":{"material":"stainless-forta-ldx-2101","state":"stainless-forta-ldx-2101-reference"},"stainless-forta-ldx-2404":{"material":"stainless-forta-ldx-2404"},"stainless-forta-ldx-2404-reference":{"material":"stainless-forta-ldx-2404","state":"stainless-forta-ldx-2404-reference"},"stainless-forta-sdx-100":{"material":"stainless-forta-sdx-100"},"stainless-forta-sdx-100-reference":{"material":"stainless-forta-sdx-100","state":"stainless-forta-sdx-100-reference"},"stainless-forta-sdx-2507":{"material":"stainless-forta-sdx-2507"},"stainless-forta-sdx-2507-reference":{"material":"stainless-forta-sdx-2507","state":"stainless-forta-sdx-2507-reference"},"stainless-steels":{"category":"stainless-steels"},"stainless-supra-316-4401":{"material":"stainless-supra-316-4401"},"stainless-supra-316-4401-reference":{"material":"stainless-supra-316-4401","state":"stainless-supra-316-4401-reference"},"stainless-supra-316-4436":{"material":"stainless-supra-316-4436"},"stainless-supra-316-4436-reference":{"material":"stainless-supra-316-4436","state":"stainless-supra-316-4436-reference"},"stainless-supra-316l-4404":{"material":"stainless-supra-316l-4404"},"stainless-supra-316l-4404-reference":{"material":"stainless-supra-316l-4404","state":"stainless-supra-316l-4404-reference"},"stainless-supra-316l-4432":{"material":"stainless-supra-316l-4432"},"stainless-supra-316l-4432-reference":{"material":"stainless-supra-316l-4432","state":"stainless-supra-316l-4432-reference"},"stainless-supra-316l-4435":{"material":"stainless-supra-316l-4435"},"stainless-supra-316l-4435-reference":{"material":"stainless-supra-316l-4435","state":"stainless-supra-316l-4435-reference"},"stainless-supra-316plus":{"material":"stainless-supra-316plus"},"stainless-supra-316plus-reference":{"material":"stainless-supra-316plus","state":"stainless-supra-316plus-reference"},"stainless-supra-316ti-4571":{"material":"stainless-supra-316ti-4571"},"stainless-supra-316ti-4571-reference":{"material":"stainless-supra-316ti-4571","state":"stainless-supra-316ti-4571-reference"},"stainless-supra-444-4521":{"material":"stainless-supra-444-4521"},"stainless-supra-444-4521-reference":{"material":"stainless-supra-444-4521","state":"stainless-supra-444-4521-reference"},"stainless-therma-253-ma":{"material":"stainless-therma-253-ma"},"stainless-therma-253-ma-reference":{"material":"stainless-therma-253-ma"},"stainless-therma-304h-4948":{"material":"stainless-therma-304h-4948"},"stainless-therma-304h-4948-reference":{"material":"stainless-therma-304h-4948"},"stainless-therma-309s-4833":{"material":"stainless-therma-309s-4833"},"stainless-therma-309s-4833-reference":{"material":"stainless-therma-309s-4833"},"stainless-therma-310s-4845":{"material":"stainless-therma-310s-4845"},"stainless-therma-310s-4845-reference":{"material":"stainless-therma-310s-4845"},"stainless-therma-314-4841":{"material":"stainless-therma-314-4841"},"stainless-therma-314-4841-reference":{"material":"stainless-therma-314-4841"},"stainless-therma-321h-4878":{"material":"stainless-therma-321h-4878"},"stainless-therma-321h-4878-reference":{"material":"stainless-therma-321h-4878"},"stainless-therma-347h":{"material":"stainless-therma-347h"},"stainless-therma-347h-reference":{"material":"stainless-therma-347h"},"stainless-therma-4713":{"material":"stainless-therma-4713"},"stainless-therma-4713-reference":{"material":"stainless-therma-4713"},"stainless-therma-4724":{"material":"stainless-therma-4724"},"stainless-therma-4724-reference":{"material":"stainless-therma-4724"},"stainless-therma-4828":{"material":"stainless-therma-4828"},"stainless-therma-4828-reference":{"material":"stainless-therma-4828"},"stainless-ultra-254-smo":{"material":"stainless-ultra-254-smo"},"stainless-ultra-254-smo-reference":{"material":"stainless-ultra-254-smo","state":"stainless-ultra-254-smo-reference"},"stainless-ultra-317l":{"material":"stainless-ultra-317l"},"stainless-ultra-317l-reference":{"material":"stainless-ultra-317l","state":"stainless-ultra-317l-reference"},"stainless-ultra-654-smo":{"material":"stainless-ultra-654-smo"},"stainless-ultra-654-smo-reference":{"material":"stainless-ultra-654-smo","state":"stainless-ultra-654-smo-reference"},"stainless-ultra-6xn":{"material":"stainless-ultra-6xn"},"stainless-ultra-6xn-reference":{"material":"stainless-ultra-6xn","state":"stainless-ultra-6xn-reference"},"stainless-ultra-725ln":{"material":"stainless-ultra-725ln"},"stainless-ultra-725ln-reference":{"material":"stainless-ultra-725ln"},"stainless-ultra-904l":{"material":"stainless-ultra-904l"},"stainless-ultra-904l-reference":{"material":"stainless-ultra-904l","state":"stainless-ultra-904l-reference"},"steel-atlas-1045":{"material":"steel-atlas-1045"},"steel-atlas-1045-reference":{"material":"steel-atlas-1045","state":"steel-atlas-1045-reference"},"steel-atlas-1214fm":{"material":"steel-atlas-1214fm"},"steel-atlas-1214fm-reference":{"material":"steel-atlas-1214fm","state":"steel-atlas-1214fm-reference"},"steel-atlas-12l14fm":{"material":"steel-atlas-12l14fm"},"steel-atlas-12l14fm-reference":{"material":"steel-atlas-12l14fm","state":"steel-atlas-12l14fm-reference"},"steel-atlas-4140":{"material":"steel-atlas-4140"},"steel-atlas-4140-reference":{"material":"steel-atlas-4140","state":"steel-atlas-4140-reference"},"steel-atlas-4340":{"material":"steel-atlas-4340"},"steel-atlas-4340-reference":{"material":"steel-atlas-4340","state":"steel-atlas-4340-reference"},"steel-atlas-6580":{"material":"steel-atlas-6580"},"steel-atlas-6580-reference":{"material":"steel-atlas-6580","state":"steel-atlas-6580-reference"},"steel-atlas-6582":{"material":"steel-atlas-6582"},"steel-atlas-6582-reference":{"material":"steel-atlas-6582","state":"steel-atlas-6582-reference"},"steel-atlas-6587":{"material":"steel-atlas-6587"},"steel-atlas-6587-reference":{"material":"steel-atlas-6587","state":"steel-atlas-6587-reference"},"steel-atlas-6657":{"material":"steel-atlas-6657"},"steel-atlas-6657-reference":{"material":"steel-atlas-6657","state":"steel-atlas-6657-reference"},"steel-atlas-8620h":{"material":"steel-atlas-8620h"},"steel-atlas-8620h-reference":{"material":"steel-atlas-8620h","state":"steel-atlas-8620h-reference"},"steel-atlas-m1020":{"material":"steel-atlas-m1020"},"steel-atlas-m1020-reference":{"material":"steel-atlas-m1020","state":"steel-atlas-m1020-reference"},"steel-atlas-m1030":{"material":"steel-atlas-m1030"},"steel-atlas-m1030-reference":{"material":"steel-atlas-m1030","state":"steel-atlas-m1030-reference"},"steel-atlas-micro900":{"material":"steel-atlas-micro900"},"steel-atlas-micro900-reference":{"material":"steel-atlas-micro900","state":"steel-atlas-micro900-reference"},"steel-uddeholm-arne":{"material":"steel-uddeholm-arne"},"steel-uddeholm-arne-hardened-and-tempered-62-hrc":{"material":"steel-uddeholm-arne","state":"steel-uddeholm-arne-hardened-and-tempered-62-hrc"},"steel-uddeholm-caldie":{"material":"steel-uddeholm-caldie"},"steel-uddeholm-caldie-hardened-and-tempered-60-61-hrc":{"material":"steel-uddeholm-caldie","state":"steel-uddeholm-caldie-hardened-and-tempered-60-61-hrc"},"steel-uddeholm-carmo":{"material":"steel-uddeholm-carmo"},"steel-uddeholm-carmo-hardened-and-tempered-240-270-hb":{"material":"steel-uddeholm-carmo","state":"steel-uddeholm-carmo-hardened-and-tempered-240-270-hb"},"steel-uddeholm-carmo-hardened-and-tempered-270-hb":{"material":"steel-uddeholm-carmo","state":"steel-uddeholm-carmo-hardened-and-tempered-270-hb"},"steel-uddeholm-dievar":{"material":"steel-uddeholm-dievar"},"steel-uddeholm-dievar-hardened-and-tempered-44-46-hrc":{"material":"steel-uddeholm-dievar","state":"steel-uddeholm-dievar-hardened-and-tempered-44-46-hrc"},"steel-uddeholm-dievar-hardened-and-tempered-44-hrc":{"material":"steel-uddeholm-dievar","state":"steel-uddeholm-dievar-hardened-and-tempered-44-hrc"},"steel-uddeholm-dievar-hardened-and-tempered-48-hrc":{"material":"steel-uddeholm-dievar","state":"steel-uddeholm-dievar-hardened-and-tempered-48-hrc"},"steel-uddeholm-dievar-hardened-and-tempered-52-hrc":{"material":"steel-uddeholm-dievar","state":"steel-uddeholm-dievar-hardened-and-tempered-52-hrc"},"steel-uddeholm-orvar-supreme":{"material":"steel-uddeholm-orvar-supreme"},"steel-uddeholm-orvar-supreme-hardened-and-tempered-45-1-hrc":{"material":"steel-uddeholm-orvar-supreme","state":"steel-uddeholm-orvar-supreme-hardened-and-tempered-45-1-hrc"},"steel-uddeholm-orvar-supreme-hardened-and-tempered-45-hrc":{"material":"steel-uddeholm-orvar-supreme","state":"steel-uddeholm-orvar-supreme-hardened-and-tempered-45-hrc"},"steel-uddeholm-orvar-supreme-hardened-and-tempered-52-hrc":{"material":"steel-uddeholm-orvar-supreme","state":"steel-uddeholm-orvar-supreme-hardened-and-tempered-52-hrc"},"steel-uddeholm-rigor":{"material":"steel-uddeholm-rigor"},"steel-uddeholm-rigor-hardened-and-tempered-62-hrc":{"material":"steel-uddeholm-rigor","state":"steel-uddeholm-rigor-hardened-and-tempered-62-hrc"},"steel-uddeholm-stavax-esr":{"material":"steel-uddeholm-stavax-esr"},"steel-uddeholm-stavax-esr-hardened-and-tempered-45-hrc":{"material":"steel-uddeholm-stavax-esr","state":"steel-uddeholm-stavax-esr-hardened-and-tempered-45-hrc"},"steel-uddeholm-stavax-esr-hardened-and-tempered-50-hrc":{"material":"steel-uddeholm-stavax-esr","state":"steel-uddeholm-stavax-esr-hardened-and-tempered-50-hrc"},"steel-uddeholm-sverker-21":{"material":"steel-uddeholm-sverker-21"},"steel-uddeholm-sverker-21-hardened-and-tempered-62-hrc":{"material":"steel-uddeholm-sverker-21","state":"steel-uddeholm-sverker-21-hardened-and-tempered-62-hrc"},"steels":{"category":"steels"},"tecadur-pbt-gf30":{"material":"tecadur-pbt-gf30"},"tecadur-pbt-gf30-reference":{"material":"tecadur-pbt-gf30"},"tecadur-pet":{"material":"tecadur-pet"},"tecadur-pet-reference":{"material":"tecadur-pet"},"tecafine-pmp":{"material":"tecafine-pmp"},"tecafine-pmp-reference":{"material":"tecafine-pmp"},"tecaflon-pvdf":{"material":"tecaflon-pvdf"},"tecaflon-pvdf-reference":{"material":"tecaflon-pvdf"},"tecaform-ad":{"material":"tecaform-ad"},"tecaform-ad-af":{"material":"tecaform-ad-af"},"tecaform-ad-af-reference":{"material":"tecaform-ad-af"},"tecaform-ad-reference":{"material":"tecaform-ad"},"tecaform-ah-els":{"material":"tecaform-ah-els"},"tecaform-ah-els-reference":{"material":"tecaform-ah-els"},"tecaform-ah-gf25":{"material":"tecaform-ah-gf25"},"tecaform-ah-gf25-reference":{"material":"tecaform-ah-gf25"},"tecaform-ah-id-blue":{"material":"tecaform-ah-id-blue"},"tecaform-ah-id-blue-reference":{"material":"tecaform-ah-id-blue"},"tecaform-ah-la":{"material":"tecaform-ah-la"},"tecaform-ah-la-reference":{"material":"tecaform-ah-la"},"tecaform-ah-mt-coloured":{"material":"tecaform-ah-mt-coloured"},"tecaform-ah-mt-coloured-reference":{"material":"tecaform-ah-mt-coloured"},"tecaform-ah-natural":{"material":"tecaform-ah-natural"},"tecaform-ah-natural-reference":{"material":"tecaform-ah-natural"},"tecaform-ah-san":{"material":"tecaform-ah-san"},"tecaform-ah-san-reference":{"material":"tecaform-ah-san"},"tecaform-ah-sd":{"material":"tecaform-ah-sd"},"tecaform-ah-sd-reference":{"material":"tecaform-ah-sd"},"tecaglide-green":{"material":"tecaglide-green"},"tecaglide-green-reference":{"material":"tecaglide-green"},"tecam-6-mo-black":{"material":"tecam-6-mo-black"},"tecam-6-mo-black-reference":{"material":"tecam-6-mo-black"},"tecamid-12":{"material":"tecamid-12"},"tecamid-12-reference":{"material":"tecamid-12"},"tecamid-46-redbrown":{"material":"tecamid-46-redbrown"},"tecamid-46-redbrown-reference":{"material":"tecamid-46-redbrown"},"tecamid-6":{"material":"tecamid-6"},"tecamid-6-gf25":{"material":"tecamid-6-gf25"},"tecamid-6-gf25-reference":{"material":"tecamid-6-gf25"},"tecamid-6-gf30-black":{"material":"tecamid-6-gf30-black"},"tecamid-6-gf30-black-reference":{"material":"tecamid-6-gf30-black"},"tecamid-6-reference":{"material":"tecamid-6"},"tecamid-66":{"material":"tecamid-66"},"tecamid-66-cf20-black":{"material":"tecamid-66-cf20-black"},"tecamid-66-cf20-black-reference":{"material":"tecamid-66-cf20-black"},"tecamid-66-gf30-black":{"material":"tecamid-66-gf30-black"},"tecamid-66-gf30-black-reference":{"material":"tecamid-66-gf30-black"},"tecamid-66-hi":{"material":"tecamid-66-hi"},"tecamid-66-hi-reference":{"material":"tecamid-66-hi"},"tecamid-66-la":{"material":"tecamid-66-la"},"tecamid-66-la-reference":{"material":"tecamid-66-la"},"tecamid-66-mh":{"material":"tecamid-66-mh"},"tecamid-66-mh-reference":{"material":"tecamid-66-mh"},"tecamid-66-reference":{"material":"tecamid-66"},"tecamid-66-x-gf50":{"material":"tecamid-66-x-gf50"},"tecamid-66-x-gf50-reference":{"material":"tecamid-66-x-gf50"},"tecanat":{"material":"tecanat"},"tecanat-gf30":{"material":"tecanat-gf30"},"tecanat-gf30-reference":{"material":"tecanat-gf30"},"tecanat-reference":{"material":"tecanat"},"tecanyl-731-grey":{"material":"tecanyl-731-grey"},"tecanyl-731-grey-reference":{"material":"tecanyl-731-grey"},"tecanyl-gf30":{"material":"tecanyl-gf30"},"tecanyl-gf30-reference":{"material":"tecanyl-gf30"},"tecanyl-mt-coloured":{"material":"tecanyl-mt-coloured"},"tecanyl-mt-coloured-reference":{"material":"tecanyl-mt-coloured"},"tecapeek":{"material":"tecapeek"},"tecapeek-cf30":{"material":"tecapeek-cf30"},"tecapeek-cf30-mt":{"material":"tecapeek-cf30-mt"},"tecapeek-cf30-mt-reference":{"material":"tecapeek-cf30-mt"},"tecapeek-cf30-reference":{"material":"tecapeek-cf30"},"tecapeek-classix-white":{"material":"tecapeek-classix-white"},"tecapeek-classix-white-reference":{"material":"tecapeek-classix-white"},"tecapeek-cmf":{"material":"tecapeek-cmf"},"tecapeek-cmf-reference":{"material":"tecapeek-cmf"},"tecapeek-els-nano":{"material":"tecapeek-els-nano"},"tecapeek-els-nano-reference":{"material":"tecapeek-els-nano"},"tecapeek-gf30":{"material":"tecapeek-gf30"},"tecapeek-gf30-reference":{"material":"tecapeek-gf30"},"tecapeek-ht-black":{"material":"tecapeek-ht-black"},"tecapeek-ht-black-reference":{"material":"tecapeek-ht-black"},"tecapeek-id-blue":{"material":"tecapeek-id-blue"},"tecapeek-id-blue-reference":{"material":"tecapeek-id-blue"},"tecapeek-mt":{"material":"tecapeek-mt"},"tecapeek-mt-reference":{"material":"tecapeek-mt"},"tecapeek-pvx":{"material":"tecapeek-pvx"},"tecapeek-pvx-reference":{"material":"tecapeek-pvx"},"tecapeek-reference":{"material":"tecapeek"},"tecapeek-st-black":{"material":"tecapeek-st-black"},"tecapeek-st-black-reference":{"material":"tecapeek-st-black"},"tecapeek-tf10":{"material":"tecapeek-tf10"},"tecapeek-tf10-reference":{"material":"tecapeek-tf10"},"tecapeek-ts":{"material":"tecapeek-ts"},"tecapeek-ts-reference":{"material":"tecapeek-ts"},"tecapei":{"material":"tecapei"},"tecapei-reference":{"material":"tecapei"},"tecapet":{"material":"tecapet"},"tecapet-reference":{"material":"tecapet"},"tecapet-tf":{"material":"tecapet-tf"},"tecapet-tf-reference":{"material":"tecapet-tf"},"tecapro-mt":{"material":"tecapro-mt"},"tecapro-mt-reference":{"material":"tecapro-mt"},"tecaran-abs-grey":{"material":"tecaran-abs-grey"},"tecaran-abs-grey-reference":{"material":"tecaran-abs-grey"},"tecarim-1500-yellow":{"material":"tecarim-1500-yellow"},"tecarim-1500-yellow-reference":{"material":"tecarim-1500-yellow"},"tecasint-1011":{"material":"tecasint-1011"},"tecasint-1011-reference":{"material":"tecasint-1011"},"tecasint-1021":{"material":"tecasint-1021"},"tecasint-1021-reference":{"material":"tecasint-1021"},"tecasint-1031":{"material":"tecasint-1031"},"tecasint-1031-reference":{"material":"tecasint-1031"},"tecasint-1041":{"material":"tecasint-1041"},"tecasint-1041-reference":{"material":"tecasint-1041"},"tecasint-1061":{"material":"tecasint-1061"},"tecasint-1061-reference":{"material":"tecasint-1061"},"tecasint-1101":{"material":"tecasint-1101"},"tecasint-1101-reference":{"material":"tecasint-1101"},"tecasint-1611":{"material":"tecasint-1611"},"tecasint-1611-reference":{"material":"tecasint-1611"},"tecasint-2011":{"material":"tecasint-2011"},"tecasint-2011-reference":{"material":"tecasint-2011"},"tecasint-2021":{"material":"tecasint-2021"},"tecasint-2021-reference":{"material":"tecasint-2021"},"tecasint-2031":{"material":"tecasint-2031"},"tecasint-2031-reference":{"material":"tecasint-2031"},"tecasint-2391":{"material":"tecasint-2391"},"tecasint-2391-reference":{"material":"tecasint-2391"},"tecasint-4011":{"material":"tecasint-4011"},"tecasint-4011-reference":{"material":"tecasint-4011"},"tecasint-4021":{"material":"tecasint-4021"},"tecasint-4021-reference":{"material":"tecasint-4021"},"tecasint-4111":{"material":"tecasint-4111"},"tecasint-4111-reference":{"material":"tecasint-4111"},"tecasint-4121":{"material":"tecasint-4121"},"tecasint-4121-reference":{"material":"tecasint-4121"},"tecasint-5051":{"material":"tecasint-5051"},"tecasint-5051-reference":{"material":"tecasint-5051"},"tecasint-5201-sd":{"material":"tecasint-5201-sd"},"tecasint-5201-sd-reference":{"material":"tecasint-5201-sd"},"tecasint-8001":{"material":"tecasint-8001"},"tecasint-8001-reference":{"material":"tecasint-8001"},"tecason-p":{"material":"tecason-p"},"tecason-p-mt-coloured":{"material":"tecason-p-mt-coloured"},"tecason-p-mt-coloured-reference":{"material":"tecason-p-mt-coloured"},"tecason-p-reference":{"material":"tecason-p"},"tecason-s":{"material":"tecason-s"},"tecason-s-reference":{"material":"tecason-s"},"tecast-l-black":{"material":"tecast-l-black"},"tecast-l-black-reference":{"material":"tecast-l-black"},"tecast-t":{"material":"tecast-t"},"tecast-t-reference":{"material":"tecast-t"},"tecast-tm":{"material":"tecast-tm"},"tecast-tm-reference":{"material":"tecast-tm"},"tecatec-peek-cw50":{"material":"tecatec-peek-cw50"},"tecatec-peek-cw50-reference":{"material":"tecatec-peek-cw50"},"tecatec-pekk-cw60":{"material":"tecatec-pekk-cw60"},"tecatec-pekk-cw60-reference":{"material":"tecatec-pekk-cw60"},"tecator-5013":{"material":"tecator-5013"},"tecator-5013-reference":{"material":"tecator-5013"},"tecator-5031-pvx":{"material":"tecator-5031-pvx"},"tecator-5031-pvx-reference":{"material":"tecator-5031-pvx"},"tecatron":{"material":"tecatron"},"tecatron-gf40":{"material":"tecatron-gf40"},"tecatron-gf40-reference":{"material":"tecatron-gf40"},"tecatron-pvx":{"material":"tecatron-pvx"},"tecatron-pvx-reference":{"material":"tecatron-pvx"},"tecatron-reference":{"material":"tecatron"},"ti-6246-da":{"material":"ti-6al-2sn-4zr-6mo","state":"ti-6246-da"},"ti-6246-sta":{"material":"ti-6al-2sn-4zr-6mo","state":"ti-6246-sta"},"ti-6al-2sn-4zr-6mo":{"material":"ti-6al-2sn-4zr-6mo"},"ti-6al-2sn-4zr-6mo-reference":{"material":"ti-6al-2sn-4zr-6mo"},"ti-6al-4v":{"material":"ti-6al-4v"},"ti-6al-4v-mill-annealed":{"material":"ti-6al-4v","state":"ti-6al-4v-mill-annealed"},"ti-6al-4v-reference":{"material":"ti-6al-4v"},"titanium-alloys":{"category":"titanium-alloys"},"tool-steels":{"category":"tool-steels"}},"observations":{"obs-001ad1e458f77eb3942a":{"legacy_record_id":"tecapeek-ts-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"110","unit":"MPa"}},"obs-0028f618e03dd54d1897":{"legacy_record_id":"tecam-6-mo-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"110","unit":"MPa"}},"obs-0040d6fcf8e3bde7fbb4":{"legacy_record_id":"al-6105-t5","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"10","unit":"%"}},"obs-00691403eabb29cfb3a6":{"legacy_record_id":"tecasint-2021-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"145","unit":"MPa"}},"obs-008c3fbcc1af16b79409":{"legacy_record_id":"tecatron-gf40-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.63","unit":"g/cm³"}},"obs-00950b83478255ecb176":{"legacy_record_id":"al-6063-t5","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"150","unit":"MPa"}},"obs-00a6440e67122d441f58":{"legacy_record_id":"coorstek-ad-85-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"296","unit":"MPa"}},"obs-00df2a22e7ab012fd157":{"legacy_record_id":"al-1100-h112","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"75","unit":"MPa"}},"obs-00e330482a211b161d34":{"legacy_record_id":"stainless-supra-316-4401-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-00ea0ac160500a405e19":{"legacy_record_id":"tecaglide-green-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"18","unit":"%"}},"obs-00f9e02678500e7d4380":{"legacy_record_id":"stainless-core-304ln-4311-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-00fd5ecd10a7a1240984":{"legacy_record_id":"steel-uddeholm-dievar-hardened-and-tempered-44-46-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"145000","unit":"MPa"}},"obs-0123b4a4750246be37fa":{"legacy_record_id":"steel-atlas-m1020-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"13","unit":"%"}},"obs-014ea28ad58a12e23428":{"legacy_record_id":"stainless-ultra-904l-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"450","unit":"J/(kg·K)"}},"obs-01ae5dea7b0d7ea684c1":{"legacy_record_id":"steel-atlas-6580-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"925","unit":"MPa"}},"obs-01b4c3dcd4db683db146":{"legacy_record_id":"tecamid-46-redbrown-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"106","unit":"MPa"}},"obs-01c63eead4175fd642d5":{"legacy_record_id":"tecamid-6-gf25-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"5,100","unit":"MPa"}},"obs-01d41f81acdc8c5f9a00":{"legacy_record_id":"coorstek-ad-995-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"379","unit":"MPa"}},"obs-022d58a6760c72c57c4e":{"legacy_record_id":"tecapeek-classix-white-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"11","unit":"%"}},"obs-0277f35c6818e924a932":{"legacy_record_id":"tecapeek-tf10-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.38","unit":"g/cm³"}},"obs-02ae1585eb7e629d433c":{"legacy_record_id":"tecapeek-pvx-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"84","unit":"MPa"}},"obs-030881e3c0fdca83a53d":{"legacy_record_id":"stainless-therma-253-ma-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"155","unit":"GPa"}},"obs-030af293a39467ffba8a":{"legacy_record_id":"al-6005a-t61","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"260","unit":"MPa"}},"obs-0318c6539ecda9016b53":{"legacy_record_id":"tecamid-66-cf20-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"5,100","unit":"MPa"}},"obs-034add61eda5b99bcb74":{"legacy_record_id":"tecaform-ah-la-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.36","unit":"g/cm³"}},"obs-036e754c8d71c86fb9dd":{"legacy_record_id":"stainless-core-439m-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"25","unit":"W/(m·K)"}},"obs-03aef7fc6ff88cc5db0d":{"legacy_record_id":"stainless-supra-316-4401-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"240","unit":"MPa"}},"obs-042bdfe2c32e9716b991":{"legacy_record_id":"tecapeek-cmf-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"170","unit":"MPa"}},"obs-0494d93acda9f5403169":{"legacy_record_id":"stainless-supra-316l-4404-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-049eb792cc4fd2bd799b":{"legacy_record_id":"steel-atlas-6582-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"900","unit":"MPa"}},"obs-04a483da2392dd70423f":{"legacy_record_id":"stainless-core-304l-4306-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"200","unit":"GPa"}},"obs-04b18237ddea76453999":{"legacy_record_id":"steel-uddeholm-rigor-hardened-and-tempered-62-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"28.5","unit":"W/(m·°C)"}},"obs-04cea90e303fa0b44ed2":{"legacy_record_id":"al-6005a-t5","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"7","unit":"%"}},"obs-04f18c5da05aa5aa2633":{"legacy_record_id":"tecason-p-mt-coloured-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.31","unit":"g/cm³"}},"obs-0551e4301e2040e81357":{"legacy_record_id":"tecapeek-cf30-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"193","unit":"MPa"}},"obs-0573846c0f5c58d08e49":{"legacy_record_id":"coorstek-plasmapure-ad-998-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"3.92","unit":"g/cm³"}},"obs-05788c78a6b360476b7a":{"legacy_record_id":"stainless-forta-dx-2205-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"200","unit":"GPa"}},"obs-05eae20253ec063f2f3e":{"legacy_record_id":"stainless-forta-ldx-2404-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-0643e7f638b4f10ad371":{"legacy_record_id":"stainless-therma-310s-4845-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"472","unit":"J/(kg·K)"}},"obs-064d68764c2fb5b46d3c":{"legacy_record_id":"tecasint-4011-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.41","unit":"g/cm³"}},"obs-067e92521dc344912781":{"legacy_record_id":"cu-c17200-reference","source_value":{"offset_to_si":0,"scale_to_si":1.730734666295328,"significant_figures":2,"text":"62–75","unit":"Btu/(ft·hr·°F)"}},"obs-068a244d2eb59c5d82e0":{"legacy_record_id":"stainless-supra-316-4401-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"200","unit":"GPa"}},"obs-069e823345ed0c7ace4b":{"legacy_record_id":"steel-uddeholm-caldie-hardened-and-tempered-60-61-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"24","unit":"W/(m·°C)"}},"obs-06d20d1f79f02be2c025":{"legacy_record_id":"ti-6al-4v-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"4.42","unit":"g/cm³"}},"obs-06f0b7d9062f9b542646":{"legacy_record_id":"stainless-therma-310s-4845-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"94","unit":"MPa"}},"obs-072f9c1375510562f6ab":{"legacy_record_id":"tecam-6-mo-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"3,300","unit":"MPa"}},"obs-07420e69ba81b08d46b9":{"legacy_record_id":"tecator-5031-pvx-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.46","unit":"g/cm³"}},"obs-0746ea4c5a3730550b4f":{"legacy_record_id":"steel-uddeholm-carmo-hardened-and-tempered-240-270-hb","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"185000","unit":"MPa"}},"obs-0754bee98c727e35ae7a":{"legacy_record_id":"tecamid-66-gf30-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"135","unit":"MPa"}},"obs-076423deb745fc07d0a1":{"legacy_record_id":"stainless-ultra-725ln-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"14","unit":"W/(m·K)"}},"obs-077e6b0a93b6689be368":{"legacy_record_id":"stainless-therma-321h-4878-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"26","unit":"W/(m·K)"}},"obs-07b6f91afc20e6168230":{"legacy_record_id":"stainless-forta-ldx-2101-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.7","unit":"kg/dm³"}},"obs-085dcba9490fc31057e9":{"legacy_record_id":"ti-6246-sta","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"10","unit":"%"}},"obs-088c53f73180c8830491":{"legacy_record_id":"tecamid-66-mh-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"3,200","unit":"MPa"}},"obs-088dcec7ce179d0884c3":{"legacy_record_id":"al-1060-o","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"234","unit":"W/(m·K)"}},"obs-0898ee08b17d3a9456e5":{"legacy_record_id":"stainless-therma-4828-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"94","unit":"MPa"}},"obs-08a81ab24eb30c9d54dc":{"legacy_record_id":"stainless-therma-304h-4948-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"157","unit":"MPa"}},"obs-08b5903137e57c1c57d9":{"legacy_record_id":"steel-atlas-8620h-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"785","unit":"MPa"}},"obs-08cb5a7a8317b9451ac2":{"legacy_record_id":"steel-atlas-8620h-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"690–930","unit":"MPa"}},"obs-08dc28e84f0cc86c3252":{"legacy_record_id":"tecaform-ah-gf25-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"51","unit":"MPa"}},"obs-08e2b57c1bce1e9fd840":{"legacy_record_id":"steel-atlas-micro900-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"600","unit":"MPa"}},"obs-08f13cac03bedd540150":{"legacy_record_id":"tecasint-1101-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"153","unit":"MPa"}},"obs-0966c47e5b4e617b5b58":{"legacy_record_id":"stainless-supra-316ti-4571-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-09740a6c9a6aa5c1f45a":{"legacy_record_id":"steel-uddeholm-sverker-21-hardened-and-tempered-62-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"460","unit":"J/(kg·°C)"}},"obs-097740cdcc9b9c2af286":{"legacy_record_id":"tecamid-6-gf30-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"98","unit":"MPa"}},"obs-097d87343df0f4e6a343":{"legacy_record_id":"stainless-therma-253-ma-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"185","unit":"MPa"}},"obs-09c23f29c6ef66caa0d9":{"legacy_record_id":"tecasint-5201-sd-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.54","unit":"g/cm³"}},"obs-09c790cbffd09777092b":{"legacy_record_id":"al-6005-t5","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"240","unit":"MPa"}},"obs-09d6605f3ad98bf05a21":{"legacy_record_id":"stainless-therma-314-4841-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"120","unit":"GPa"}},"obs-0a05b6e7c8c86e804a0c":{"legacy_record_id":"stainless-therma-4724-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"23","unit":"W/(m·K)"}},"obs-0a089bbbc08d73acfbbf":{"legacy_record_id":"stainless-therma-321h-4878-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"162","unit":"MPa"}},"obs-0a12b1b93eb558007727":{"legacy_record_id":"stainless-forta-edx-2304-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"500","unit":"J/(kg·K)"}},"obs-0ab0d4324856f6d0391b":{"legacy_record_id":"tecam-6-mo-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.37","unit":"W/(m·K)"}},"obs-0b00c296d510824baca0":{"legacy_record_id":"tecanyl-gf30-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"1.3","unit":"g/cm³"}},"obs-0b3af8609a6ca00b5ee9":{"legacy_record_id":"tecapeek-els-nano-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"4,800","unit":"MPa"}},"obs-0b406bf9ad63aec480bf":{"legacy_record_id":"cu-c14500-reference","source_value":{"offset_to_si":0,"scale_to_si":1.730734666295328,"significant_figures":3,"text":"205","unit":"Btu/(ft·hr·°F)"}},"obs-0bb134401e2328f4109d":{"legacy_record_id":"tecamid-66-x-gf50-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.61","unit":"g/cm³"}},"obs-0be3580fc50edac6dea5":{"legacy_record_id":"tecapeek-cf30-mt-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"115","unit":"MPa"}},"obs-0be6452151cc7f835291":{"legacy_record_id":"steel-atlas-6587-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1080–1320","unit":"MPa"}},"obs-0bf90a427ac18ee056df":{"legacy_record_id":"stainless-therma-314-4841-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"100","unit":"MPa"}},"obs-0c09e45c310195039742":{"legacy_record_id":"stainless-supra-316ti-4571-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"40","unit":"%"}},"obs-0c15ab9ba616a0f9da39":{"legacy_record_id":"tecasint-1101-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.34","unit":"g/cm³"}},"obs-0c2cfde12b73a84c4f49":{"legacy_record_id":"tecast-tm-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"3,200","unit":"MPa"}},"obs-0c4e13425e238578e845":{"legacy_record_id":"tecadur-pet-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"14","unit":"%"}},"obs-0c7866bf14f2b084f6a7":{"legacy_record_id":"steel-atlas-m1020-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"340","unit":"MPa"}},"obs-0c90795177f4189410c5":{"legacy_record_id":"stainless-supra-316l-4435-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"200","unit":"GPa"}},"obs-0d08b1e70c7a744d861b":{"legacy_record_id":"coorstek-dura-z-ttz-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"900","unit":"MPa"}},"obs-0d13518861a4afc60639":{"legacy_record_id":"tecanyl-731-grey-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"22","unit":"%"}},"obs-0d208cd5935d4c0736b4":{"legacy_record_id":"tecasint-2011-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"177","unit":"MPa"}},"obs-0d38ea3c464b54398222":{"legacy_record_id":"stainless-supra-316l-4404-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"40","unit":"%"}},"obs-0d5760c62eebb150f4db":{"legacy_record_id":"stainless-therma-4713-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"450","unit":"J/(kg·K)"}},"obs-0d728fbbc59fa7251ee3":{"legacy_record_id":"coorstek-nbd-200-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"320","unit":"GPa"}},"obs-0da93f0f621f200bed49":{"legacy_record_id":"al-6105-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":2,"text":"0.097","unit":"lb/in³"}},"obs-0dc97515d5264aa91ca3":{"legacy_record_id":"cu-c18000-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":".315","unit":"lb/in³"}},"obs-0e2f95319cf8f8d524ab":{"legacy_record_id":"tecast-t-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"83","unit":"MPa"}},"obs-0e49c4ab1acf8116bc70":{"legacy_record_id":"steel-uddeholm-stavax-esr-hardened-and-tempered-50-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":4,"text":"7750","unit":"kg/m³"}},"obs-0e8a3f5ba12051a4bc01":{"legacy_record_id":"coorstek-mullite-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"950","unit":"J/(kg·K)"}},"obs-0ead38900e3e681a7d39":{"legacy_record_id":"cu-c71500-reference","source_value":{"offset_to_si":0,"scale_to_si":1.730734666295328,"significant_figures":2,"text":"17","unit":"Btu/(ft·hr·°F)"}},"obs-0eb42542e6afc4e3f7e6":{"legacy_record_id":"stainless-ultra-317l-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"8.0","unit":"kg/dm³"}},"obs-0eca03302b62b6729a3c":{"legacy_record_id":"stainless-core-304l-4306-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"500","unit":"J/(kg·K)"}},"obs-0ee9b0fe4c81c6a88758":{"legacy_record_id":"coorstek-steatite-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"2.5","unit":"W/(m·K)"}},"obs-0eee57e772c6547a7ba3":{"legacy_record_id":"stainless-core-305-4303-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"45","unit":"%"}},"obs-0f14453a637ba2ea91be":{"legacy_record_id":"tecamid-66-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"70","unit":"%"}},"obs-0f58c594f34b44cc55f2":{"legacy_record_id":"tecaform-ah-els-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1,800","unit":"MPa"}},"obs-0f5a8c961ed1487ca950":{"legacy_record_id":"stainless-forta-edx-2304-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"25","unit":"%"}},"obs-0f9e6038da3c7a24208e":{"legacy_record_id":"stainless-forta-ldx-2101-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"205","unit":"GPa"}},"obs-0fcebb4cbe253bcc9e49":{"legacy_record_id":"tecanat-gf30-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.42","unit":"g/cm³"}},"obs-0fd5b787ec05a5b8ed62":{"legacy_record_id":"tecadur-pbt-gf30-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.46","unit":"g/cm³"}},"obs-0fdaa99800ee4fd8f2f6":{"legacy_record_id":"tecaform-ah-san-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"18","unit":"%"}},"obs-1004089f7ae50d9e0188":{"legacy_record_id":"tecamid-66-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"3,500","unit":"MPa"}},"obs-1006270f25c33dd50daf":{"legacy_record_id":"stainless-therma-4828-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"400","unit":"MPa"}},"obs-101638479a521386f89c":{"legacy_record_id":"tecanat-gf30-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"138","unit":"MPa"}},"obs-10458abbaadbc6d1cb04":{"legacy_record_id":"tecapeek-id-blue-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.27","unit":"W/(m·K)"}},"obs-104aefbdc20f663be2f8":{"legacy_record_id":"tecanat-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"2,200","unit":"MPa"}},"obs-105157beaa9780af5ab4":{"legacy_record_id":"stainless-supra-316plus-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-108b4ff2bc640b4b2cad":{"legacy_record_id":"coorstek-porcelain-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"2.40","unit":"g/cm³"}},"obs-109ad5fa0f0db0401ed8":{"legacy_record_id":"tecamid-66-mh-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.15","unit":"g/cm³"}},"obs-109e93e479c4125d36ae":{"legacy_record_id":"stainless-therma-321h-4878-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"142","unit":"MPa"}},"obs-10b0c2003e8cc7f17ef8":{"legacy_record_id":"tecason-p-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.25","unit":"W/(m·K)"}},"obs-10bad260f81816f5f587":{"legacy_record_id":"tecaform-ah-id-blue-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"100","unit":"MPa"}},"obs-10e2a53917477b88d737":{"legacy_record_id":"al-1350-h111","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"25","unit":"MPa"}},"obs-10f15372221bd2473a49":{"legacy_record_id":"tecasint-4021-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"3","unit":"%"}},"obs-10f26123d8044c65bd59":{"legacy_record_id":"al-6042-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":2,"text":"0.098","unit":"lb/in³"}},"obs-1140f46458a2441d07f7":{"legacy_record_id":"tecamid-66-hi-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.36","unit":"W/(m·K)"}},"obs-114732faf2ea68437582":{"legacy_record_id":"stainless-therma-310s-4845-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"385","unit":"MPa"}},"obs-116dc2977e542dd3d890":{"legacy_record_id":"coorstek-zta-10-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"4.01","unit":"g/cm³"}},"obs-1177c429c369b2361a08":{"legacy_record_id":"stainless-forta-sdx-100-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-1189d9b1b021457648e9":{"legacy_record_id":"tecamid-66-hi-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"25","unit":"%"}},"obs-11c5ba82e7f32c4c3bd4":{"legacy_record_id":"tecapet-tf-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"6","unit":"%"}},"obs-11ea50f8703c7e7b1e59":{"legacy_record_id":"steel-uddeholm-arne-hardened-and-tempered-62-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"185000","unit":"N/mm²"}},"obs-1209002607443dee0307":{"legacy_record_id":"tecasint-1611-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"122","unit":"MPa"}},"obs-120eb07fd550e20e966c":{"legacy_record_id":"al-6105-t1","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"105","unit":"MPa"}},"obs-120ffbadfa8fc38ffc51":{"legacy_record_id":"tecatron-pvx-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"53","unit":"MPa"}},"obs-125cabf089a11565c97b":{"legacy_record_id":"stainless-therma-304h-4948-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"385","unit":"MPa"}},"obs-126e52ffc7d28965a082":{"legacy_record_id":"cu-c71500-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":".323","unit":"lb/in³"}},"obs-1284e869f2141287ff9b":{"legacy_record_id":"steel-uddeholm-orvar-supreme-hardened-and-tempered-45-1-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"140000","unit":"MPa"}},"obs-12a670c15f58cb1f5303":{"legacy_record_id":"tecapeek-gf30-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.35","unit":"W/(m·K)"}},"obs-131346274e40f99998a4":{"legacy_record_id":"tecasint-4121-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"34","unit":"MPa"}},"obs-134d2448602fc8d1ce03":{"legacy_record_id":"tecamid-66-la-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.11","unit":"g/cm³"}},"obs-1360b8dfd38a05d5f4c3":{"legacy_record_id":"stainless-forta-dx-2205-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"700–950","unit":"MPa"}},"obs-13808f1a29f616dd395e":{"legacy_record_id":"coorstek-rbb4c-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"50.0","unit":"W/(m·K)"}},"obs-13880ac85f9afef5e4fb":{"legacy_record_id":"steel-uddeholm-sverker-21-hardened-and-tempered-62-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":4,"text":"7650","unit":"kg/m³"}},"obs-138ab186fd05dd496269":{"legacy_record_id":"stainless-forta-edx-2304-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"200","unit":"GPa"}},"obs-138d0b44cf7c2655c9d9":{"legacy_record_id":"tecanat-gf30-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"87","unit":"MPa"}},"obs-13fe7ec6c77e8c9735c0":{"legacy_record_id":"nickel-ultra-alloy-825-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"440","unit":"J/(kg·K)"}},"obs-1425329b3f51f3c690e0":{"legacy_record_id":"cu-c12200-reference","source_value":{"offset_to_si":0,"scale_to_si":1.730734666295328,"significant_figures":3,"text":"196","unit":"Btu/(ft·hr·°F)"}},"obs-1447c210cb1e143ff2c7":{"legacy_record_id":"al-6063-t5","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"8","unit":"%"}},"obs-149635fd5cadc00fb682":{"legacy_record_id":"stainless-core-304l-4306-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"45","unit":"%"}},"obs-149ee74327c5ecfeb14e":{"legacy_record_id":"coorstek-ad-90-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"16.7","unit":"W/(m·K)"}},"obs-149f42a8858c5b2fc1fb":{"legacy_record_id":"stainless-therma-314-4841-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"410","unit":"MPa"}},"obs-14c95c1c63d22dc322da":{"legacy_record_id":"steel-atlas-m1020-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"12","unit":"%"}},"obs-150980fe4418b1acfacd":{"legacy_record_id":"stainless-therma-304h-4948-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"108","unit":"MPa"}},"obs-15125402fbe9e858ca24":{"legacy_record_id":"stainless-therma-253-ma-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"155","unit":"MPa"}},"obs-15840a0046a47320ba09":{"legacy_record_id":"stainless-core-304l-4307-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"200","unit":"GPa"}},"obs-15e10835951a373f2f2e":{"legacy_record_id":"tecator-5013-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"151","unit":"MPa"}},"obs-160441f407af8a059992":{"legacy_record_id":"stainless-ultra-904l-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"35","unit":"%"}},"obs-160701f4b59b9b9fa2d4":{"legacy_record_id":"coorstek-plasmapure-ad-998-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"390","unit":"MPa"}},"obs-1607b8ea1e29a22b6c3e":{"legacy_record_id":"al-1060-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":"0.0975","unit":"lb/in³"}},"obs-1619c1b93528f4a6735c":{"legacy_record_id":"steel-uddeholm-sverker-21-hardened-and-tempered-62-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"21.0","unit":"W/(m·°C)"}},"obs-161c0e141469cd101a88":{"legacy_record_id":"stainless-therma-310s-4845-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"100","unit":"MPa"}},"obs-1651a386464669013dfa":{"legacy_record_id":"al-6101-t6","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"218","unit":"W/(m·K)"}},"obs-165eab81f7e16742199d":{"legacy_record_id":"ti-6al-2sn-4zr-6mo-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"107","unit":"GPa"}},"obs-16bb196ae7d1e5e52c45":{"legacy_record_id":"tecaglide-green-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.38","unit":"W/(m·K)"}},"obs-16dad00507ec31979748":{"legacy_record_id":"tecason-p-mt-coloured-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"81","unit":"MPa"}},"obs-16f8ab6b0e1f4ae9d56c":{"legacy_record_id":"tecamid-6-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"79","unit":"MPa"}},"obs-1718b9ca11b8b32742ca":{"legacy_record_id":"steel-uddeholm-orvar-supreme-hardened-and-tempered-45-1-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":4,"text":"7700","unit":"kg/m³"}},"obs-172dc0aaebae35036735":{"legacy_record_id":"stainless-ultra-904l-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"530–730","unit":"MPa"}},"obs-1752707aefbddbb2cffa":{"legacy_record_id":"tecasint-8001-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.88","unit":"g/cm³"}},"obs-1795ffd3522096338bc5":{"legacy_record_id":"stainless-forta-sdx-2507-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"20","unit":"%"}},"obs-17a33d66b306562609d3":{"legacy_record_id":"tecasint-1031-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"2.2","unit":"%"}},"obs-17b788eda7af62cd3f85":{"legacy_record_id":"stainless-ultra-6xn-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"650–850","unit":"MPa"}},"obs-17c06df2cb37da4aa49f":{"legacy_record_id":"al-6005a-t61","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"188","unit":"W/(m·K)"}},"obs-17ed632e9a8b16a2cbf5":{"legacy_record_id":"steel-atlas-6582-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"800","unit":"MPa"}},"obs-17fd02de19eee8d50249":{"legacy_record_id":"tecaform-ad-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"79","unit":"MPa"}},"obs-180718b1c8e16fdfcc20":{"legacy_record_id":"steel-atlas-6580-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"9","unit":"%"}},"obs-181c80c5f2a4fead08fb":{"legacy_record_id":"tecaform-ah-els-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"11","unit":"%"}},"obs-18532bab8111ab3e2359":{"legacy_record_id":"steel-atlas-6580-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"900–1000","unit":"MPa"}},"obs-18581d7cfabe8bf9f226":{"legacy_record_id":"stainless-forta-ldx-2101-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"530","unit":"MPa"}},"obs-1858991659f0522c760d":{"legacy_record_id":"tecasint-4111-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.46","unit":"g/cm³"}},"obs-188fce46ea2da3996309":{"legacy_record_id":"steel-atlas-6580-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"820","unit":"MPa"}},"obs-18b528762e5dd2b6839f":{"legacy_record_id":"tecaform-ah-san-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"69","unit":"MPa"}},"obs-18db6c4ce484653aadaa":{"legacy_record_id":"tecasint-8001-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"15","unit":"MPa"}},"obs-18db719b35f463cd9c31":{"legacy_record_id":"coorstek-cordierite-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"55","unit":"MPa"}},"obs-193bb73fc37bd70d7bbd":{"legacy_record_id":"cu-c51000-reference","source_value":{"offset_to_si":0,"scale_to_si":1.730734666295328,"significant_figures":2,"text":"40","unit":"Btu/(ft·hr·°F)"}},"obs-198c7c074ad3841fce13":{"legacy_record_id":"al-6005a-t5","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"215","unit":"MPa"}},"obs-1994ca273da1e7f4ff59":{"legacy_record_id":"tecapet-tf-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"119","unit":"MPa"}},"obs-19ed7f4b0f77da537a9a":{"legacy_record_id":"tecapet-tf-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"78","unit":"MPa"}},"obs-19f5200e3c0963d33172":{"legacy_record_id":"steel-uddeholm-carmo-hardened-and-tempered-270-hb","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"15","unit":"%"}},"obs-1a0c92251044b94dc29e":{"legacy_record_id":"al-6105-t6","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"193","unit":"W/(m·K)"}},"obs-1a2f957cbb0c236129f2":{"legacy_record_id":"steel-atlas-6587-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"980–1270","unit":"MPa"}},"obs-1a34658e5167846233ca":{"legacy_record_id":"tecasint-4121-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"0.5","unit":"%"}},"obs-1a3661b56a866d7b6dc0":{"legacy_record_id":"tecamid-6-gf30-black-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"5","unit":"%"}},"obs-1a46f5c06665fe18f5e4":{"legacy_record_id":"tecason-p-mt-coloured-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.25","unit":"W/(m·K)"}},"obs-1a49f0d3d7f06bea18e5":{"legacy_record_id":"al-6082-t6","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"6","unit":"%"}},"obs-1a99d7fbdeb39b015c48":{"legacy_record_id":"tecapeek-ts-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"175","unit":"MPa"}},"obs-1af4fdfa05e3294e380e":{"legacy_record_id":"stainless-supra-316-4401-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"8.0","unit":"kg/dm³"}},"obs-1b2ef9026c0cebe59f4c":{"legacy_record_id":"tecapeek-pvx-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"84","unit":"MPa"}},"obs-1b33a45d631989371591":{"legacy_record_id":"coorstek-esd-alumina-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"300","unit":"MPa"}},"obs-1b51764915e21dfe040f":{"legacy_record_id":"stainless-supra-316ti-4571-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"500","unit":"J/(kg·K)"}},"obs-1b608037f28c2105368d":{"legacy_record_id":"coorstek-nt-154-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"900","unit":"MPa"}},"obs-1b8f4eb679473c0cc691":{"legacy_record_id":"tecarim-1500-yellow-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"58","unit":"%"}},"obs-1ba45f5693d201aaf921":{"legacy_record_id":"al-6061-t4","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"155","unit":"W/(m·K)"}},"obs-1bbfdd9a9b6e9268c516":{"legacy_record_id":"stainless-supra-316-4401-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"500","unit":"J/(kg·K)"}},"obs-1bc69271dd80f6e69a44":{"legacy_record_id":"tecasint-4011-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"4,000","unit":"MPa"}},"obs-1bdd7b705c53077d8c9b":{"legacy_record_id":"stainless-therma-4828-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"196","unit":"GPa"}},"obs-1c081ff7a8afd142fe4f":{"legacy_record_id":"steel-uddeholm-orvar-supreme-hardened-and-tempered-45-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1420","unit":"MPa"}},"obs-1c0c592f43e63378204e":{"legacy_record_id":"steel-atlas-12l14fm-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"330","unit":"MPa"}},"obs-1c10697a3d564bc7f610":{"legacy_record_id":"al-6063-t4","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"125","unit":"MPa"}},"obs-1ca8e76e8ab07d7fcb3e":{"legacy_record_id":"al-6042-t5","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"167","unit":"W/(m·K)"}},"obs-1cb824d0b21e9409e28a":{"legacy_record_id":"cu-c54400-reference","source_value":{"offset_to_si":0,"scale_to_si":4186.8,"significant_figures":1,"text":".09","unit":"Btu/(lb·°F)"}},"obs-1cc822549376c9f8f15a":{"legacy_record_id":"tecanyl-gf30-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"73","unit":"MPa"}},"obs-1cd7fec4505f48fabd2c":{"legacy_record_id":"tecapeek-cf30-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"7","unit":"%"}},"obs-1ce2b3f6f81c200c48cb":{"legacy_record_id":"stainless-therma-321h-4878-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"350","unit":"MPa"}},"obs-1d0ce2e6796c6f2b0b8e":{"legacy_record_id":"steel-atlas-4140-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"665","unit":"MPa"}},"obs-1d4c88f5fd9c48ea61ed":{"legacy_record_id":"coorstek-ad-96-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"358","unit":"MPa"}},"obs-1d7d32ec47efde7adc23":{"legacy_record_id":"coorstek-ultrasic-sc-30-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"800","unit":"J/(kg·K)"}},"obs-1d9996d1076df8d876d9":{"legacy_record_id":"stainless-core-347-4550-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"40","unit":"%"}},"obs-1e2039a11e5c341a0b1e":{"legacy_record_id":"tecasint-5051-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"94","unit":"MPa"}},"obs-1e231555cebdb8422f08":{"legacy_record_id":"steel-atlas-4140-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"13","unit":"%"}},"obs-1e324279dd438b8c262e":{"legacy_record_id":"stainless-therma-304h-4948-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"17","unit":"W/(m·K)"}},"obs-1e7d3157cd3c46691412":{"legacy_record_id":"tecapet-tf-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"78","unit":"MPa"}},"obs-1eed26351d74d7c816fd":{"legacy_record_id":"stainless-core-439m-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.7","unit":"kg/dm³"}},"obs-1f2f39aad6703908017f":{"legacy_record_id":"al-6063-t5","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"110","unit":"MPa"}},"obs-1f9fd584ca6d4fa3fa4e":{"legacy_record_id":"stainless-therma-304h-4948-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"127","unit":"MPa"}},"obs-1fa6d2600547d54309fc":{"legacy_record_id":"tecamid-6-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.37","unit":"W/(m·K)"}},"obs-1fdc16198133daacd086":{"legacy_record_id":"tecast-t-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"3,500","unit":"MPa"}},"obs-20e38ee00348173896f9":{"legacy_record_id":"tecapeek-cmf-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"105","unit":"MPa"}},"obs-20fcc5267bed1517c42a":{"legacy_record_id":"steel-atlas-micro900-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"13","unit":"%"}},"obs-2122d540e861fbebeba6":{"legacy_record_id":"cu-c51000-reference","source_value":{"offset_to_si":0,"scale_to_si":4186.8,"significant_figures":1,"text":".09","unit":"Btu/(lb·°F)"}},"obs-21578429947db78e4cee":{"legacy_record_id":"tecapeek-cmf-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.65","unit":"g/cm³"}},"obs-21f539c5f002cd2ff4a4":{"legacy_record_id":"al-6262-t6","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"260","unit":"MPa"}},"obs-2209b392cdd337ac17c7":{"legacy_record_id":"stainless-therma-321h-4878-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"370","unit":"MPa"}},"obs-220b49a33d2e907e98d2":{"legacy_record_id":"tecamid-66-gf30-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.39","unit":"W/(m·K)"}},"obs-221467cfec892454266b":{"legacy_record_id":"coorstek-zta-10-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.30","unit":"1"}},"obs-224cbd53d42c2e1bc20b":{"legacy_record_id":"stainless-forta-dx-2304-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"500","unit":"J/(kg·K)"}},"obs-225992d2482fdcb8a30a":{"legacy_record_id":"stainless-therma-321h-4878-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"137","unit":"MPa"}},"obs-225dbc676c7b0b9818a4":{"legacy_record_id":"stainless-therma-309s-4833-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"108","unit":"MPa"}},"obs-226e207157851b3d7fd4":{"legacy_record_id":"tecaglide-green-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"76","unit":"MPa"}},"obs-228b04426b4a1630910c":{"legacy_record_id":"stainless-therma-309s-4833-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"19","unit":"W/(m·K)"}},"obs-22aa04cdacc39d2a1a1a":{"legacy_record_id":"stainless-therma-253-ma-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"535","unit":"MPa"}},"obs-22ccddb79499e71904ab":{"legacy_record_id":"tecasint-4111-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.35","unit":"W/(m·K)"}},"obs-22e035895b974dbe2995":{"legacy_record_id":"coorstek-cordierite-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"2.05","unit":"g/cm³"}},"obs-2329b90b9b13fca3399e":{"legacy_record_id":"steel-uddeholm-dievar-hardened-and-tempered-44-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1210","unit":"MPa"}},"obs-232ccbc2027c1b9b05a2":{"legacy_record_id":"steel-atlas-6582-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"900–1100","unit":"MPa"}},"obs-2330333ddfaf2d5d3dc8":{"legacy_record_id":"tecatron-gf40-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"145","unit":"MPa"}},"obs-23347fb45d60d2170963":{"legacy_record_id":"steel-atlas-6580-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1000–1100","unit":"MPa"}},"obs-233bb92fcedb573ae0ab":{"legacy_record_id":"tecaform-ad-af-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.46","unit":"W/(m·K)"}},"obs-23a0a791258ef52895c6":{"legacy_record_id":"tecapeek-cf30-mt-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.59","unit":"W/(m·K)"}},"obs-23dceb2d5be66c6a4a30":{"legacy_record_id":"stainless-forta-sdx-2507-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"500","unit":"J/(kg·K)"}},"obs-23e9122d78db04d76dad":{"legacy_record_id":"steel-uddeholm-stavax-esr-hardened-and-tempered-50-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"24","unit":"W/(m·°C)"}},"obs-241b96d96fb19035b02a":{"legacy_record_id":"steel-atlas-8620h-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"490","unit":"MPa"}},"obs-2495d99fe5596b02f1ba":{"legacy_record_id":"stainless-supra-444-4521-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"420–640","unit":"MPa"}},"obs-24b411d4181a19be499a":{"legacy_record_id":"coorstek-hpb4c-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.17","unit":"1"}},"obs-24c40db53f5927bbabac":{"legacy_record_id":"cu-c18700-reference","source_value":{"offset_to_si":0,"scale_to_si":4186.8,"significant_figures":2,"text":".092","unit":"Btu/(lb·°F)"}},"obs-252811120aeaf8bbc53d":{"legacy_record_id":"coorstek-sc-rb-sc-2-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"462","unit":"MPa"}},"obs-25aa4c272aea65b7bde9":{"legacy_record_id":"steel-uddeholm-arne-hardened-and-tempered-62-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"190000","unit":"N/mm²"}},"obs-25b57a46150ca18c68ee":{"legacy_record_id":"steel-uddeholm-sverker-21-hardened-and-tempered-62-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":1,"text":"200000","unit":"MPa"}},"obs-25f3aa952c5677f73216":{"legacy_record_id":"tecapeek-mt-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.27","unit":"W/(m·K)"}},"obs-2602a11469ee7c1dbe53":{"legacy_record_id":"al-6005a-t5","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"260","unit":"MPa"}},"obs-261acc703c641768b302":{"legacy_record_id":"tecamid-66-cf20-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.72","unit":"W/(m·K)"}},"obs-26438d0158b7885e0bf2":{"legacy_record_id":"al-6005-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":2,"text":"0.097","unit":"lb/in³"}},"obs-266c19a107faf55b774a":{"legacy_record_id":"stainless-ultra-317l-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"240","unit":"MPa"}},"obs-2698ecc88c0c8e5aebd1":{"legacy_record_id":"tecatec-pekk-cw60-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"960","unit":"MPa"}},"obs-26a2720148a8482d575e":{"legacy_record_id":"steel-atlas-12l14fm-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"9","unit":"%"}},"obs-26b8f996b8359285b801":{"legacy_record_id":"tecapeek-cf30-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"122","unit":"MPa"}},"obs-26cd0079e2bd25180773":{"legacy_record_id":"stainless-core-304-4301-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-270cef7f094f8309ea51":{"legacy_record_id":"stainless-therma-310s-4845-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"24","unit":"W/(m·K)"}},"obs-2753288b7a3eea10a557":{"legacy_record_id":"al-6101-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":2,"text":"0.097","unit":"lb/in³"}},"obs-279bfcce6144089b72e4":{"legacy_record_id":"tecapeek-tf10-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"8","unit":"%"}},"obs-27bafbe847d440b31554":{"legacy_record_id":"tecamid-46-redbrown-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.19","unit":"g/cm³"}},"obs-27f21007e06992621e7d":{"legacy_record_id":"stainless-supra-316l-4404-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"500","unit":"J/(kg·K)"}},"obs-2819f465335414dbcd63":{"legacy_record_id":"tecasint-8001-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":3,"text":"200","unit":"%"}},"obs-284dd2bd29ba3db57740":{"legacy_record_id":"stainless-therma-4828-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.8","unit":"kg/dm³"}},"obs-2858e353671c0d915ce3":{"legacy_record_id":"stainless-supra-316plus-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"650–850","unit":"MPa"}},"obs-2880d6c68336990c5fff":{"legacy_record_id":"stainless-therma-309s-4833-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"120","unit":"GPa"}},"obs-28bec869103328073e23":{"legacy_record_id":"steel-atlas-6582-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"14","unit":"%"}},"obs-28c9a472a9ca20c8332d":{"legacy_record_id":"stainless-supra-316-4436-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"200","unit":"GPa"}},"obs-28d0051caae8244e1119":{"legacy_record_id":"al-6101-t64","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"55","unit":"MPa"}},"obs-28ed56963a16de4833e6":{"legacy_record_id":"stainless-therma-309s-4833-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"128","unit":"MPa"}},"obs-28fe4ff9a6bc8fdf0f04":{"legacy_record_id":"al-6105-t5","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"260","unit":"MPa"}},"obs-291886338316aeabb9a9":{"legacy_record_id":"stainless-core-201ln-4372-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"680–880","unit":"MPa"}},"obs-291a0628eca303f6bf45":{"legacy_record_id":"steel-uddeholm-orvar-supreme-hardened-and-tempered-45-1-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"210000","unit":"MPa"}},"obs-291b4a8781792c3935a8":{"legacy_record_id":"stainless-therma-347h-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"320","unit":"MPa"}},"obs-2951b7ccc9d2e0bf6d58":{"legacy_record_id":"cu-c10200-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":".323","unit":"lb/in³"}},"obs-29715d2d160206b6c980":{"legacy_record_id":"stainless-core-301-4310-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.9","unit":"kg/dm³"}},"obs-297f5aeebc65a9307e6c":{"legacy_record_id":"steel-atlas-6582-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1000–1200","unit":"MPa"}},"obs-29b2928f03e0b9c21e05":{"legacy_record_id":"tecamid-66-mh-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"84","unit":"MPa"}},"obs-29c9155c27cdefd60192":{"legacy_record_id":"stainless-core-305-4303-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"500","unit":"J/(kg·K)"}},"obs-29d200c44562682ce185":{"legacy_record_id":"cu-c65500-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":".308","unit":"lb/in³"}},"obs-2a25c698c22b487633b5":{"legacy_record_id":"tecasint-4021-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"4,943","unit":"MPa"}},"obs-2a5ea5b5d3650a97af2b":{"legacy_record_id":"tecapeek-cf30-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"6,800","unit":"MPa"}},"obs-2aa11a8166dd621f6956":{"legacy_record_id":"tecapei-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"35","unit":"%"}},"obs-2aafa5c8bd5458071dfb":{"legacy_record_id":"stainless-core-439m-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"22","unit":"%"}},"obs-2ad975cd0b28e98290cf":{"legacy_record_id":"stainless-therma-310s-4845-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"430","unit":"MPa"}},"obs-2b6bde38fb021388366c":{"legacy_record_id":"al-1060-o","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"60–95","unit":"MPa"}},"obs-2b7fd1de800ed85d5a50":{"legacy_record_id":"tecason-s-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"15","unit":"%"}},"obs-2b93fd7dd86407d54b30":{"legacy_record_id":"stainless-therma-314-4841-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"108","unit":"MPa"}},"obs-2c283fa7e1956037ca85":{"legacy_record_id":"coorstek-hp-aln-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"330","unit":"GPa"}},"obs-2c57c9af6ebecb1496f5":{"legacy_record_id":"stainless-therma-309s-4833-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"196","unit":"GPa"}},"obs-2c5d21dc8ee975374f97":{"legacy_record_id":"al-6063-t1","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"115","unit":"MPa"}},"obs-2c65d46e66d610299382":{"legacy_record_id":"al-6063-t5","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"209","unit":"W/(m·K)"}},"obs-2c67866d633b69338d37":{"legacy_record_id":"tecaform-ah-id-blue-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.39","unit":"W/(m·K)"}},"obs-2ca7ba5c17de5570d226":{"legacy_record_id":"stainless-supra-444-4521-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.7","unit":"kg/dm³"}},"obs-2cae3ec5ff664b2696b9":{"legacy_record_id":"coorstek-wc-aci-ni6-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"84.0","unit":"W/(m·K)"}},"obs-2ceb598eceaa045b300e":{"legacy_record_id":"tecapeek-ts-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"110","unit":"MPa"}},"obs-2cf71fd430ce470554c7":{"legacy_record_id":"stainless-ultra-725ln-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"8.0","unit":"kg/dm³"}},"obs-2d0bde33d13547f3b555":{"legacy_record_id":"tecamid-6-gf30-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.41","unit":"W/(m·K)"}},"obs-2d3dae3ba2d4b0e1b040":{"legacy_record_id":"coorstek-ad-96-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"303","unit":"GPa"}},"obs-2d9f6bb86b00a7e76e4d":{"legacy_record_id":"steel-uddeholm-dievar-hardened-and-tempered-44-hrc","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"13","unit":"%"}},"obs-2df0022f2880357a7809":{"legacy_record_id":"steel-uddeholm-sverker-21-hardened-and-tempered-62-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"180000","unit":"MPa"}},"obs-2e6f24c4a703db4dfd20":{"legacy_record_id":"al-6005-t5","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"188","unit":"W/(m·K)"}},"obs-2ecd600eae15c1afd605":{"legacy_record_id":"steel-atlas-6657-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"11","unit":"%"}},"obs-2f0de8ccf71aa8f275dc":{"legacy_record_id":"tecapeek-tf10-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"95","unit":"MPa"}},"obs-2f465203096dc70bb93c":{"legacy_record_id":"steel-atlas-4340-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"690","unit":"MPa"}},"obs-2f5e25f4fd7f7fbe5a24":{"legacy_record_id":"tecator-5031-pvx-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"135","unit":"MPa"}},"obs-2f7270a7971655a4904d":{"legacy_record_id":"stainless-therma-309s-4833-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-2f842dd11b825d841ccd":{"legacy_record_id":"tecason-p-mt-coloured-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"81","unit":"MPa"}},"obs-2f9221dc5dc2e72b564b":{"legacy_record_id":"steel-uddeholm-orvar-supreme-hardened-and-tempered-52-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1820","unit":"MPa"}},"obs-2fa283f7e3b569977439":{"legacy_record_id":"steel-atlas-6582-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"13","unit":"%"}},"obs-2fcad69a495c5aceccbb":{"legacy_record_id":"stainless-core-304l-4306-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-2fdc8d4a2192a6119d6a":{"legacy_record_id":"al-6063-t4","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"14","unit":"%"}},"obs-2ff229afef00d1261d79":{"legacy_record_id":"steel-uddeholm-stavax-esr-hardened-and-tempered-50-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"210000","unit":"N/mm²"}},"obs-30300380013a8911ddfc":{"legacy_record_id":"tecaflon-pvdf-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"62","unit":"MPa"}},"obs-30353993057aa441601f":{"legacy_record_id":"stainless-core-304l-4307-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"45","unit":"%"}},"obs-30a80ab1316288d05245":{"legacy_record_id":"coorstek-hpb4c-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"2.5","unit":"g/cm³"}},"obs-30ac7d4ad0465e90e84e":{"legacy_record_id":"steel-atlas-4340-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"835","unit":"MPa"}},"obs-30d2232c426864c45cb9":{"legacy_record_id":"stainless-therma-347h-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"191","unit":"MPa"}},"obs-312f1040dd93208d20d2":{"legacy_record_id":"al-6262-t6","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"167","unit":"W/(m·K)"}},"obs-312ff3b0bcd40089494c":{"legacy_record_id":"steel-uddeholm-sverker-21-hardened-and-tempered-62-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"210000","unit":"MPa"}},"obs-3146109e46434205c816":{"legacy_record_id":"tecapei-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"127","unit":"MPa"}},"obs-31b9dfeb3c96e438b950":{"legacy_record_id":"coorstek-ytzp-hiped-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"400","unit":"J/(kg·K)"}},"obs-31ed52261096327be1b0":{"legacy_record_id":"al-6063-t5","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"145","unit":"MPa"}},"obs-31f41e54c4831b865722":{"legacy_record_id":"stainless-therma-304h-4948-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"375","unit":"MPa"}},"obs-32034130901d04c3a754":{"legacy_record_id":"stainless-forta-sdx-100-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"500","unit":"J/(kg·K)"}},"obs-3205e67731e150579dca":{"legacy_record_id":"tecamid-6-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"100","unit":"MPa"}},"obs-32414041bebee03224af":{"legacy_record_id":"al-6005a-t5","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"193","unit":"W/(m·K)"}},"obs-326a529287da24ed962c":{"legacy_record_id":"steel-uddeholm-caldie-hardened-and-tempered-60-61-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"213000","unit":"MPa"}},"obs-326f2fcf7b033f77e5e1":{"legacy_record_id":"tecaglide-green-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"3,200","unit":"MPa"}},"obs-32734e34feefc9df7616":{"legacy_record_id":"stainless-forta-edx-2304-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-32b8fb87905dc9054ead":{"legacy_record_id":"cu-c75200-reference","source_value":{"offset_to_si":0,"scale_to_si":1.730734666295328,"significant_figures":2,"text":"19","unit":"Btu/(ft·hr·°F)"}},"obs-32dc49c7b96794f6939a":{"legacy_record_id":"stainless-therma-253-ma-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"230","unit":"MPa"}},"obs-32dff2fe712e485654bf":{"legacy_record_id":"stainless-core-304l-4306-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"220","unit":"MPa"}},"obs-33076a4381539f07b17b":{"legacy_record_id":"al-6005a-t1","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"15","unit":"%"}},"obs-331ba57d37d6127439d6":{"legacy_record_id":"stainless-supra-444-4521-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"20","unit":"%"}},"obs-335e6c9dfcd61bd6fe8d":{"legacy_record_id":"steel-atlas-8620h-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"590","unit":"MPa"}},"obs-337533a263018329d3f8":{"legacy_record_id":"stainless-ultra-654-smo-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"11","unit":"W/(m·K)"}},"obs-3377d7140f04a0bc31a4":{"legacy_record_id":"stainless-therma-310s-4845-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"400","unit":"MPa"}},"obs-33abbcbdbc5b19f36044":{"legacy_record_id":"tecast-l-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.37","unit":"W/(m·K)"}},"obs-33b1524e23a90c46ddc0":{"legacy_record_id":"al-6063-t5","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"209","unit":"W/(m·K)"}},"obs-33e0edfea9dccbc222dc":{"legacy_record_id":"coorstek-sc-rb-sc-2-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.20","unit":"1"}},"obs-3401245f11791876207b":{"legacy_record_id":"steel-uddeholm-rigor-hardened-and-tempered-62-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"170000","unit":"N/mm²"}},"obs-340801bbc9214bcacb50":{"legacy_record_id":"tecaform-ah-els-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.46","unit":"W/(m·K)"}},"obs-3418c337105e88f1805f":{"legacy_record_id":"stainless-ultra-654-smo-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"750–1000","unit":"MPa"}},"obs-346d0a426556a0f63840":{"legacy_record_id":"cu-c21000-reference","source_value":{"offset_to_si":0,"scale_to_si":1.730734666295328,"significant_figures":3,"text":"135","unit":"Btu/(ft·hr·°F)"}},"obs-34cb41b38a8189da8b95":{"legacy_record_id":"stainless-therma-4828-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"472","unit":"J/(kg·K)"}},"obs-34cd28034f12b04a649b":{"legacy_record_id":"stainless-core-305-4303-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"500–650","unit":"MPa"}},"obs-359184ab55d3e448343e":{"legacy_record_id":"stainless-therma-314-4841-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"94","unit":"MPa"}},"obs-3597e663e5e9614a1b3e":{"legacy_record_id":"stainless-core-4622-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.7","unit":"kg/dm³"}},"obs-35adbfb9663ffa035154":{"legacy_record_id":"tecapeek-st-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"134","unit":"MPa"}},"obs-35dc4cc18d264ece3f89":{"legacy_record_id":"tecason-s-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"89","unit":"MPa"}},"obs-35fce41c4c6b0018e757":{"legacy_record_id":"tecamid-66-gf30-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"91","unit":"MPa"}},"obs-369084487db7e59b5163":{"legacy_record_id":"cu-c14500-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":".323","unit":"lb/in³"}},"obs-369629929ed1a9bf8ac7":{"legacy_record_id":"steel-uddeholm-dievar-hardened-and-tempered-52-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1900","unit":"MPa"}},"obs-36ee7b8d505993f35023":{"legacy_record_id":"tecapeek-pvx-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.44","unit":"g/cm³"}},"obs-371463dfbbeb72a10a0e":{"legacy_record_id":"stainless-therma-310s-4845-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"450","unit":"MPa"}},"obs-37306099c272e827063e":{"legacy_record_id":"cu-c54400-reference","source_value":{"offset_to_si":0,"scale_to_si":1.730734666295328,"significant_figures":2,"text":"50","unit":"Btu/(ft·hr·°F)"}},"obs-374dba2015a53baac6e7":{"legacy_record_id":"al-6262-t6","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"240","unit":"MPa"}},"obs-376cf31ae3a3a7532cfd":{"legacy_record_id":"stainless-therma-310s-4845-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"140","unit":"MPa"}},"obs-3817d1b3dbf0a21c6dea":{"legacy_record_id":"tecamid-66-hi-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"89","unit":"MPa"}},"obs-3823d3752ba509dd6253":{"legacy_record_id":"tecamid-12-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.02","unit":"g/cm³"}},"obs-38a0ec71e4dc71be85bd":{"legacy_record_id":"stainless-core-321-4541-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"40","unit":"%"}},"obs-38b3361f1ce4b48e4db1":{"legacy_record_id":"cu-c10200-reference","source_value":{"offset_to_si":0,"scale_to_si":4186.8,"significant_figures":2,"text":".092","unit":"Btu/(lb·°F)"}},"obs-38dccab3b4c4ccb618f1":{"legacy_record_id":"stainless-forta-sdx-2507-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"550","unit":"MPa"}},"obs-3985d3e68f0529cec1e3":{"legacy_record_id":"tecatec-pekk-cw60-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.61","unit":"g/cm³"}},"obs-39af534c38a69e8c23dc":{"legacy_record_id":"steel-atlas-6580-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1020","unit":"MPa"}},"obs-39b1341600ce7bfb095b":{"legacy_record_id":"tecapeek-cf30-mt-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"5","unit":"%"}},"obs-3a518f54fb9bff4bf756":{"legacy_record_id":"stainless-core-439m-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"415","unit":"MPa"}},"obs-3a561bf08beca42fbb7e":{"legacy_record_id":"tecadur-pbt-gf30-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"6","unit":"%"}},"obs-3a566ea4b7932f00c6da":{"legacy_record_id":"stainless-therma-309s-4833-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"94","unit":"MPa"}},"obs-3ab7d2d980c5bfa5e36a":{"legacy_record_id":"coorstek-hpb4c-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"90","unit":"W/(m·K)"}},"obs-3af4a107916c6c204ebb":{"legacy_record_id":"steel-atlas-m1030-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"440","unit":"MPa"}},"obs-3b35d5748e4b7501ecd8":{"legacy_record_id":"stainless-therma-347h-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"476","unit":"MPa"}},"obs-3b3b3f9a97bf72999bc6":{"legacy_record_id":"tecapeek-gf30-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"105","unit":"MPa"}},"obs-3b5628defd5fed31a6ad":{"legacy_record_id":"al-6063-t4","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"193","unit":"W/(m·K)"}},"obs-3b8fe34082dc6a1fd29f":{"legacy_record_id":"steel-atlas-1045-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"640","unit":"MPa"}},"obs-3ba634e7f82f4d5396eb":{"legacy_record_id":"coorstek-hpb4c-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"460","unit":"GPa"}},"obs-3bca807038640d357a10":{"legacy_record_id":"tecaform-ah-san-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.39","unit":"W/(m·K)"}},"obs-3beac6d17195a28aac09":{"legacy_record_id":"steel-atlas-4140-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"665","unit":"MPa"}},"obs-3c12e235c00fd929cea2":{"legacy_record_id":"stainless-therma-253-ma-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-3c2d2cd60b4ca5b436e8":{"legacy_record_id":"al-6082-t5","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"270","unit":"MPa"}},"obs-3c5e9a2094ad1016c338":{"legacy_record_id":"al-6005a-t61","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"240","unit":"MPa"}},"obs-3c630f427fe8f67e3883":{"legacy_record_id":"tecapet-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"3,100","unit":"MPa"}},"obs-3c6d02317083d83c8900":{"legacy_record_id":"steel-atlas-1214fm-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"330","unit":"MPa"}},"obs-3cdb1c0a7703a2c78f18":{"legacy_record_id":"tecaform-ah-mt-coloured-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"2,800","unit":"MPa"}},"obs-3ce153b0e3e2eacdd4fc":{"legacy_record_id":"tecarim-1500-yellow-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"2,200","unit":"MPa"}},"obs-3ceb92aab21b4ec7dcef":{"legacy_record_id":"stainless-therma-347h-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-3cfbe61d287a4b12332c":{"legacy_record_id":"stainless-therma-304h-4948-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"98","unit":"MPa"}},"obs-3d36015ba69a915917d3":{"legacy_record_id":"steel-uddeholm-rigor-hardened-and-tempered-62-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":4,"text":"7700","unit":"kg/m³"}},"obs-3d3e99bf22815b862c7b":{"legacy_record_id":"coorstek-ad-90-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"3.60","unit":"g/cm³"}},"obs-3d42df60646fa7948876":{"legacy_record_id":"stainless-forta-sdx-100-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"20","unit":"%"}},"obs-3d4567a78c984b43f1ae":{"legacy_record_id":"tecaform-ah-id-blue-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"68","unit":"MPa"}},"obs-3da47c7aa6455fd36a3d":{"legacy_record_id":"tecaform-ah-natural-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"91","unit":"MPa"}},"obs-3e1421c15c773b677c1f":{"legacy_record_id":"tecafine-pmp-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"31","unit":"MPa"}},"obs-3e1913e9d7f4779d4d28":{"legacy_record_id":"tecason-p-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"81","unit":"MPa"}},"obs-3e31f68fbe65062ea499":{"legacy_record_id":"stainless-ultra-254-smo-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"35","unit":"%"}},"obs-3e759f2958cca79e561a":{"legacy_record_id":"steel-atlas-1045-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"8","unit":"%"}},"obs-3e9b16b0b1b00720572e":{"legacy_record_id":"coorstek-hpb4c-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"410","unit":"MPa"}},"obs-3eb625b9da8482d477db":{"legacy_record_id":"tecamid-6-gf25-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"11","unit":"%"}},"obs-3ef66e0e6500f51bad15":{"legacy_record_id":"stainless-therma-347h-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"400","unit":"MPa"}},"obs-3efb766ae8662dcd43dd":{"legacy_record_id":"al-6105-t6","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"260","unit":"MPa"}},"obs-3f068642106857616efa":{"legacy_record_id":"tecast-tm-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.15","unit":"g/cm³"}},"obs-3f1561652373a1fbde75":{"legacy_record_id":"steel-uddeholm-carmo-hardened-and-tempered-240-270-hb","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":4,"text":"7660","unit":"kg/m³"}},"obs-3fcacaa3b72f0d338b24":{"legacy_record_id":"tecason-p-mt-coloured-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"2,300","unit":"MPa"}},"obs-3fe8e995947a5cbc58c7":{"legacy_record_id":"steel-atlas-6582-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"700","unit":"MPa"}},"obs-405d4ac15f252992a41f":{"legacy_record_id":"tecatec-peek-cw50-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.49","unit":"g/cm³"}},"obs-405eff646732835ad78f":{"legacy_record_id":"al-6063-t6","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"201","unit":"W/(m·K)"}},"obs-41025acc8bfcb496c7d4":{"legacy_record_id":"stainless-therma-4713-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"25","unit":"W/(m·K)"}},"obs-4104c2d6f13590a79a1b":{"legacy_record_id":"coorstek-zta-10-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"360","unit":"GPa"}},"obs-41386f472e3a7ac12d6d":{"legacy_record_id":"tecapeek-cf30-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"122","unit":"MPa"}},"obs-4187dfb18f8632c9ba88":{"legacy_record_id":"stainless-supra-316l-4435-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"8.0","unit":"kg/dm³"}},"obs-41c62758753b739581b6":{"legacy_record_id":"nickel-ultra-alloy-825-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"30","unit":"%"}},"obs-42e448ddcf695e7dff5e":{"legacy_record_id":"cu-c54400-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":".321","unit":"lb/in³"}},"obs-42f30fd1241ac67be7a9":{"legacy_record_id":"al-6082-t5","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"230","unit":"MPa"}},"obs-430d882be4defece4642":{"legacy_record_id":"cu-c38500-reference","source_value":{"offset_to_si":0,"scale_to_si":1.730734666295328,"significant_figures":2,"text":"71","unit":"Btu/(ft·hr·°F)"}},"obs-4311cc744a810fc75325":{"legacy_record_id":"al-6005a-t61","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"8","unit":"%"}},"obs-43808318ae1ea16981d4":{"legacy_record_id":"cu-c46400-reference","source_value":{"offset_to_si":0,"scale_to_si":1.730734666295328,"significant_figures":2,"text":"67","unit":"Btu/(ft·hr·°F)"}},"obs-43e1a99003455fdaf83f":{"legacy_record_id":"steel-atlas-4140-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"740","unit":"MPa"}},"obs-4410642dacf0da480d3d":{"legacy_record_id":"cu-c36500-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":".304","unit":"lb/in³"}},"obs-44362c0afd787a34bf01":{"legacy_record_id":"tecanyl-gf30-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.28","unit":"W/(m·K)"}},"obs-44f7f0e1a026aaaf6bd4":{"legacy_record_id":"tecapeek-els-nano-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"4","unit":"%"}},"obs-45027b1e8dd692742156":{"legacy_record_id":"coorstek-mullite-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"2.80","unit":"g/cm³"}},"obs-450e56931e5a6aba727e":{"legacy_record_id":"tecadur-pbt-gf30-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"46","unit":"MPa"}},"obs-453ea8266edb9e214d39":{"legacy_record_id":"tecaflon-pvdf-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"2,200","unit":"MPa"}},"obs-458f793bdf3af5acf4e4":{"legacy_record_id":"steel-atlas-4340-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"14","unit":"%"}},"obs-45a2da584083b2fef24b":{"legacy_record_id":"cu-c33000-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":".307","unit":"lb/in³"}},"obs-4684d545088a39d38913":{"legacy_record_id":"cu-c65500-reference","source_value":{"offset_to_si":0,"scale_to_si":1.730734666295328,"significant_figures":2,"text":"21","unit":"Btu/(ft·hr·°F)"}},"obs-46a6953f0c87cd04a19b":{"legacy_record_id":"tecatron-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"100","unit":"MPa"}},"obs-46bcdbd6e970352be623":{"legacy_record_id":"steel-uddeholm-dievar-hardened-and-tempered-44-46-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"31","unit":"W/(m·°C)"}},"obs-46c01bb2781c493beb1c":{"legacy_record_id":"stainless-therma-314-4841-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-46c7cd982c0221af4484":{"legacy_record_id":"steel-atlas-1214fm-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"350","unit":"MPa"}},"obs-46f8a7108a56e7b41a3a":{"legacy_record_id":"tecasint-1011-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.34","unit":"g/cm³"}},"obs-46ffa9ea560283736cf8":{"legacy_record_id":"al-6005-t5","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"260","unit":"MPa"}},"obs-47340061efac0ce810ee":{"legacy_record_id":"cu-c11000-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":".321–.323","unit":"lb/in³"}},"obs-473dcbb1c7c2a3939788":{"legacy_record_id":"stainless-core-441-4509-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"460","unit":"J/(kg·K)"}},"obs-474958aec46ebb10bade":{"legacy_record_id":"tecast-l-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"69","unit":"MPa"}},"obs-474c6d2d70956ea33d36":{"legacy_record_id":"stainless-therma-253-ma-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"198","unit":"MPa"}},"obs-475868e1db61a25aac0e":{"legacy_record_id":"stainless-therma-321h-4878-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"335","unit":"MPa"}},"obs-4773c4f0ce247cc3c230":{"legacy_record_id":"stainless-supra-316plus-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"350","unit":"MPa"}},"obs-478487a51baa32e5fc2c":{"legacy_record_id":"coorstek-plasmapure-ad-998-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.22","unit":"1"}},"obs-47a678a8ed65431f8fdc":{"legacy_record_id":"tecapeek-pvx-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.82","unit":"W/(m·K)"}},"obs-47bbdc5828a666731e78":{"legacy_record_id":"coorstek-dura-z-ttz-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"400","unit":"J/(kg·K)"}},"obs-47e72103dede43121686":{"legacy_record_id":"stainless-core-4622-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"21","unit":"W/(m·K)"}},"obs-482a4b0df6a9a7f82587":{"legacy_record_id":"al-6061-t4","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"110","unit":"MPa"}},"obs-483cc4e0aaabfc5a3098":{"legacy_record_id":"stainless-supra-316l-4432-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"240","unit":"MPa"}},"obs-48529e132cf77c66b2ce":{"legacy_record_id":"tecamid-66-x-gf50-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"8,700","unit":"MPa"}},"obs-488f4df4f344ac9f826f":{"legacy_record_id":"stainless-therma-4828-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"108","unit":"MPa"}},"obs-48eaf669d5b84b0c03a6":{"legacy_record_id":"al-6105-t6","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"240","unit":"MPa"}},"obs-4916254782c3f143e834":{"legacy_record_id":"tecatron-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.36","unit":"g/cm³"}},"obs-496f6e634f991a0d5d6b":{"legacy_record_id":"stainless-core-301ln-4318-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"200","unit":"GPa"}},"obs-4989b66610e422dd565a":{"legacy_record_id":"stainless-core-201-4372-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.8","unit":"kg/dm³"}},"obs-49a35ea62a5968bc1dc4":{"legacy_record_id":"tecasint-1101-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"209","unit":"MPa"}},"obs-49a6d454e7dc0b3e140b":{"legacy_record_id":"stainless-therma-304h-4948-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"93","unit":"MPa"}},"obs-49aff23c4b4c6b12a752":{"legacy_record_id":"stainless-forta-ldx-2404-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"550","unit":"MPa"}},"obs-49c3454ec9b5d1e9a2aa":{"legacy_record_id":"coorstek-puresic-cvd-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"665","unit":"J/(kg·K)"}},"obs-49f178bc13e47f7033fa":{"legacy_record_id":"steel-uddeholm-dievar-hardened-and-tempered-48-hrc","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"13","unit":"%"}},"obs-4a246300fce77f083682":{"legacy_record_id":"tecaform-ah-mt-coloured-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"94","unit":"MPa"}},"obs-4a2d1c4810935754e607":{"legacy_record_id":"al-6082-t6","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"8","unit":"%"}},"obs-4abee46f5dea7b08d107":{"legacy_record_id":"tecapeek-st-black-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"13","unit":"%"}},"obs-4acacc882e3dbe3c39ed":{"legacy_record_id":"al-6061-t4","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":2,"text":"0.098","unit":"lb/in³"}},"obs-4b0eae986fe60cdc6ff6":{"legacy_record_id":"tecasint-2011-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"4.5","unit":"%"}},"obs-4b24be4201285b330af6":{"legacy_record_id":"stainless-therma-314-4841-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"116","unit":"MPa"}},"obs-4ba536035a30f38db1a5":{"legacy_record_id":"tecasint-2011-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.22","unit":"W/(m·K)"}},"obs-4bb738c481796bab38d2":{"legacy_record_id":"coorstek-ytzp-hiped-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"6.07","unit":"g/cm³"}},"obs-4c360b2c7436d82413f8":{"legacy_record_id":"coorstek-sc-rb-sc-2-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"800","unit":"J/(kg·K)"}},"obs-4ca464d42b9d2355a3e1":{"legacy_record_id":"cu-c17200-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":".298","unit":"lb/in³"}},"obs-4ca58843a46a889d5bb2":{"legacy_record_id":"tecapeek-id-blue-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"166","unit":"MPa"}},"obs-4ca8e5a4d5e76076d2ef":{"legacy_record_id":"stainless-therma-347h-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"370","unit":"MPa"}},"obs-4d06ac9ee3b7db3e5c46":{"legacy_record_id":"steel-atlas-6582-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"800–950","unit":"MPa"}},"obs-4d096e2a405916d15f12":{"legacy_record_id":"tecapro-mt-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"34","unit":"MPa"}},"obs-4d0abcc337b85d869382":{"legacy_record_id":"stainless-therma-304h-4948-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.9","unit":"kg/dm³"}},"obs-4d991d68817bfa2028af":{"legacy_record_id":"tecamid-66-gf30-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"91","unit":"MPa"}},"obs-4daa2df989576ebc4ea3":{"legacy_record_id":"stainless-core-347-4550-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.9","unit":"kg/dm³"}},"obs-4dbb2fc0469282c224cf":{"legacy_record_id":"coorstek-rbb4c-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"2.65","unit":"g/cm³"}},"obs-4dc128e4f2e854dbf2fd":{"legacy_record_id":"tecam-6-mo-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"82","unit":"MPa"}},"obs-4dda6f1a13a68bd43f7f":{"legacy_record_id":"tecaform-ad-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"3,400","unit":"MPa"}},"obs-4df8af22570455539cc9":{"legacy_record_id":"tecamid-66-x-gf50-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"200","unit":"MPa"}},"obs-4e2abd5af1b91f9bad37":{"legacy_record_id":"tecason-s-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"122","unit":"MPa"}},"obs-4e3971bd0d781342aa85":{"legacy_record_id":"stainless-therma-304h-4948-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"117","unit":"MPa"}},"obs-4e50a550e26ac43a9da4":{"legacy_record_id":"stainless-therma-253-ma-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"630","unit":"MPa"}},"obs-4e81241e762d06ac089c":{"legacy_record_id":"tecaform-ah-la-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.39","unit":"W/(m·K)"}},"obs-4ebc979d461fa2f7f365":{"legacy_record_id":"tecasint-4011-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"4.5","unit":"%"}},"obs-4ecf496bad41078c1d83":{"legacy_record_id":"stainless-ultra-6xn-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"195","unit":"GPa"}},"obs-4ed1421de3da4181a3ec":{"legacy_record_id":"stainless-therma-347h-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"167","unit":"MPa"}},"obs-4ee9ac415d83f0ab2fbc":{"legacy_record_id":"tecamid-12-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":3,"text":"200","unit":"%"}},"obs-4f06ad628f5fb9fbc495":{"legacy_record_id":"stainless-core-347-4550-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"520–720","unit":"MPa"}},"obs-4f1e1c5fb506d6c94d01":{"legacy_record_id":"steel-uddeholm-stavax-esr-hardened-and-tempered-50-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"185000","unit":"N/mm²"}},"obs-4f49c80ca3f9487765b6":{"legacy_record_id":"tecaglide-green-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.13","unit":"g/cm³"}},"obs-4f7195292872446f99b4":{"legacy_record_id":"stainless-ultra-317l-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"35","unit":"%"}},"obs-4f730127151e0413b47f":{"legacy_record_id":"ti-6246-da","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1103","unit":"MPa"}},"obs-4f8ac1397ee9421b521b":{"legacy_record_id":"steel-atlas-1214fm-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"9","unit":"%"}},"obs-50445d15ba9cf5dac856":{"legacy_record_id":"stainless-ultra-254-smo-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"195","unit":"GPa"}},"obs-505391d5004bcf5202a5":{"legacy_record_id":"stainless-therma-310s-4845-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"91","unit":"MPa"}},"obs-50ad3a3a5e3894295cf6":{"legacy_record_id":"stainless-therma-310s-4845-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"470","unit":"MPa"}},"obs-50c34d6fdc4537573496":{"legacy_record_id":"tecamid-66-gf30-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.34","unit":"g/cm³"}},"obs-50d7ddb40f660b531453":{"legacy_record_id":"steel-uddeholm-stavax-esr-hardened-and-tempered-50-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"16","unit":"W/(m·°C)"}},"obs-50fd546de83bbfe90964":{"legacy_record_id":"steel-atlas-12l14fm-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"8","unit":"%"}},"obs-511130d9e849ac22ed19":{"legacy_record_id":"coorstek-sc-rb-sc-2-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"393","unit":"GPa"}},"obs-51a5046127a93cdf069c":{"legacy_record_id":"stainless-ultra-654-smo-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"40","unit":"%"}},"obs-51b12d3163c058a6760a":{"legacy_record_id":"stainless-core-201ln-4372-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"45","unit":"%"}},"obs-52084765d3450510260b":{"legacy_record_id":"stainless-therma-347h-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"125","unit":"MPa"}},"obs-521f057a4e02153d20cb":{"legacy_record_id":"steel-atlas-6580-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"12","unit":"%"}},"obs-524acf38ecc0feb70cfa":{"legacy_record_id":"coorstek-ytzp-sintered-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"6.02","unit":"g/cm³"}},"obs-524fda91c8b3b85c1a89":{"legacy_record_id":"tecaform-ah-natural-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"32","unit":"%"}},"obs-529a82e0f23520e75192":{"legacy_record_id":"stainless-therma-309s-4833-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"140","unit":"MPa"}},"obs-52aaf6c64dcbc86cfe43":{"legacy_record_id":"stainless-therma-4828-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"470","unit":"MPa"}},"obs-52afd2b09cf67b6241de":{"legacy_record_id":"stainless-core-439m-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"205","unit":"MPa"}},"obs-52eb4124e0a31befa907":{"legacy_record_id":"al-6005a-t61","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"240","unit":"MPa"}},"obs-52f5b513d91835104228":{"legacy_record_id":"steel-atlas-8620h-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"980–1270","unit":"MPa"}},"obs-532daf5285bf7a417288":{"legacy_record_id":"coorstek-ytzp-hiped-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"210","unit":"GPa"}},"obs-53e52b2d1437d9a9e72a":{"legacy_record_id":"stainless-therma-304h-4948-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"200","unit":"GPa"}},"obs-5416113309741bb3bebe":{"legacy_record_id":"ti-6al-4v-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"0.670","unit":"J/(g·K)"}},"obs-54492618b4aa0ce59d58":{"legacy_record_id":"stainless-therma-253-ma-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"545","unit":"MPa"}},"obs-545ac789505298ec97e7":{"legacy_record_id":"cu-c64200-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":".278","unit":"lb/in³"}},"obs-549f7d7c86706da11960":{"legacy_record_id":"tecast-t-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.38","unit":"W/(m·K)"}},"obs-54a2b9e023dee5ac62ba":{"legacy_record_id":"coorstek-fg-995-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"880","unit":"J/(kg·K)"}},"obs-54c5c08184f9ef98211e":{"legacy_record_id":"tecapei-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"3,200","unit":"MPa"}},"obs-54ea618b46293d10fc58":{"legacy_record_id":"tecapeek-gf30-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.53","unit":"g/cm³"}},"obs-557c6e16e60c6c078be6":{"legacy_record_id":"stainless-therma-253-ma-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"280","unit":"MPa"}},"obs-55ebce636465a241b77f":{"legacy_record_id":"coorstek-ultrasic-sc-30-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"3.15","unit":"g/cm³"}},"obs-55f2ad9a3ba86c8b72a3":{"legacy_record_id":"steel-atlas-4140-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"930–1080","unit":"MPa"}},"obs-55f47548f4bfae36e2d6":{"legacy_record_id":"cu-c12200-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":".323","unit":"lb/in³"}},"obs-5671abba24cdc76c8488":{"legacy_record_id":"stainless-forta-edx-2304-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"690","unit":"MPa"}},"obs-56a725bae478452ad3f3":{"legacy_record_id":"al-6063-t1","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"12","unit":"%"}},"obs-56b08a24908f673f80f0":{"legacy_record_id":"tecasint-1041-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"4,340","unit":"MPa"}},"obs-56d0b21011123df4d8a2":{"legacy_record_id":"tecaform-ah-san-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"93","unit":"MPa"}},"obs-56d88a960bc4c44005f7":{"legacy_record_id":"steel-uddeholm-orvar-supreme-hardened-and-tempered-45-1-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":4,"text":"7600","unit":"kg/m³"}},"obs-56ea77c087df6120e99e":{"legacy_record_id":"cu-c14300-reference","source_value":{"offset_to_si":0,"scale_to_si":1.730734666295328,"significant_figures":3,"text":"218","unit":"Btu/(ft·hr·°F)"}},"obs-572487cb5ed86bb3bd8e":{"legacy_record_id":"tecasint-5201-sd-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"4,500","unit":"MPa"}},"obs-5724963004b2499105d3":{"legacy_record_id":"steel-atlas-6587-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"8","unit":"%"}},"obs-572b0d77674989d266cf":{"legacy_record_id":"tecaform-ah-la-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"70","unit":"MPa"}},"obs-5750ec0d50140680ad02":{"legacy_record_id":"tecamid-66-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"84","unit":"MPa"}},"obs-57e4c0ce898b76ac4901":{"legacy_record_id":"al-6082-t6","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"280","unit":"MPa"}},"obs-57ef3ef553824901e166":{"legacy_record_id":"stainless-therma-347h-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"330","unit":"MPa"}},"obs-5810528c9fbd4764a030":{"legacy_record_id":"coorstek-sn-101c-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"310","unit":"GPa"}},"obs-58172d0c5184baef4762":{"legacy_record_id":"tecanat-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.25","unit":"W/(m·K)"}},"obs-582c4e1c18477914139a":{"legacy_record_id":"tecadur-pbt-gf30-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.33","unit":"W/(m·K)"}},"obs-582d854877d6d993d1e3":{"legacy_record_id":"coorstek-ultrasic-sc-30-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":4,"text":"150.0","unit":"W/(m·K)"}},"obs-583c547392adb1f65320":{"legacy_record_id":"tecamid-46-redbrown-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.37","unit":"W/(m·K)"}},"obs-58487a48840a72b78f63":{"legacy_record_id":"coorstek-nbd-200-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"29","unit":"W/(m·K)"}},"obs-5865c1b8a2cd6673c438":{"legacy_record_id":"coorstek-ad-94-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"22.4","unit":"W/(m·K)"}},"obs-5881d20558bd8b16e15c":{"legacy_record_id":"steel-atlas-12l14fm-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"350","unit":"MPa"}},"obs-591093b31dea34c6796c":{"legacy_record_id":"stainless-therma-310s-4845-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"410","unit":"MPa"}},"obs-591ee53917541510ea3a":{"legacy_record_id":"tecamid-66-hi-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"3,400","unit":"MPa"}},"obs-5946c6aef85a482b3d27":{"legacy_record_id":"stainless-therma-310s-4845-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"405","unit":"MPa"}},"obs-598fbde0163076b0cce7":{"legacy_record_id":"stainless-therma-310s-4845-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"196","unit":"GPa"}},"obs-59add44829ea7befb6ac":{"legacy_record_id":"al-6042-t5","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"240","unit":"MPa"}},"obs-59bc4f84ac78f5776dab":{"legacy_record_id":"coorstek-hp-aln-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"740","unit":"J/(kg·K)"}},"obs-59beb7ec5b0bd8c8048b":{"legacy_record_id":"stainless-core-304l-4306-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.9","unit":"kg/dm³"}},"obs-5a09e230b18e830f4bcb":{"legacy_record_id":"stainless-forta-sdx-100-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"200","unit":"GPa"}},"obs-5a94f541a6e96618777c":{"legacy_record_id":"al-6005-t5","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"8","unit":"%"}},"obs-5a9c76a950191417aa29":{"legacy_record_id":"tecamid-66-mh-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.36","unit":"W/(m·K)"}},"obs-5ab8a32dcb0d88a2ba35":{"legacy_record_id":"steel-uddeholm-rigor-hardened-and-tempered-62-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"27.0","unit":"W/(m·°C)"}},"obs-5ae9fea967b493653afa":{"legacy_record_id":"tecapeek-mt-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"15","unit":"%"}},"obs-5afbfc80b3d8cafe06f9":{"legacy_record_id":"tecanyl-731-grey-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"57","unit":"MPa"}},"obs-5b46ff03667203761100":{"legacy_record_id":"tecapeek-pvx-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"5,500","unit":"MPa"}},"obs-5c1b71e8bc2997ba886d":{"legacy_record_id":"al-6101-t6","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"200","unit":"MPa"}},"obs-5c2cd1df4dfeeb0f5f59":{"legacy_record_id":"al-1060-h112","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":3,"text":"25.0","unit":"%"}},"obs-5c6c57875a101c34d074":{"legacy_record_id":"tecasint-2031-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"6,300","unit":"MPa"}},"obs-5c718f214dc5a3a1d562":{"legacy_record_id":"stainless-core-347-4550-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"220","unit":"MPa"}},"obs-5c851aa28997053b97f2":{"legacy_record_id":"tecanyl-gf30-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"73","unit":"MPa"}},"obs-5d0234c6a48a95d80276":{"legacy_record_id":"tecapeek-ht-black-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"5","unit":"%"}},"obs-5d59828ae417e845d1a7":{"legacy_record_id":"coorstek-cordierite-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":2,"text":"40","unit":"GPa"}},"obs-5d62866961c02adc5dd5":{"legacy_record_id":"stainless-core-321-4541-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"220","unit":"MPa"}},"obs-5dcd9d1e8be9f53985b3":{"legacy_record_id":"cu-c22000-reference","source_value":{"offset_to_si":0,"scale_to_si":4186.8,"significant_figures":1,"text":".09","unit":"Btu/(lb·°F)"}},"obs-5dd2eddcbab80c94e5ae":{"legacy_record_id":"stainless-therma-321h-4878-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.9","unit":"kg/dm³"}},"obs-5dfb830207f424d415f6":{"legacy_record_id":"cu-c10100-reference","source_value":{"offset_to_si":0,"scale_to_si":1.730734666295328,"significant_figures":3,"text":"226","unit":"Btu/(ft·hr·°F)"}},"obs-5e0454cbebda2d6ebff8":{"legacy_record_id":"steel-atlas-4340-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"740","unit":"MPa"}},"obs-5e5455c47ca25e520cce":{"legacy_record_id":"coorstek-ytzp-sintered-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"400","unit":"J/(kg·K)"}},"obs-5e857edcb8d59e064ebf":{"legacy_record_id":"steel-atlas-8620h-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"9","unit":"%"}},"obs-5eb6fdeee9265af1cc88":{"legacy_record_id":"tecanat-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"69","unit":"MPa"}},"obs-5ee358ba7ebeb1e3e1af":{"legacy_record_id":"stainless-core-305-4303-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-5eea0946f0ac64477ace":{"legacy_record_id":"stainless-forta-dx-2304-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"200","unit":"GPa"}},"obs-5ef7a536e30caf30b511":{"legacy_record_id":"tecapeek-classix-white-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"4,700","unit":"MPa"}},"obs-5f25d58b3442d936df1c":{"legacy_record_id":"tecaran-abs-grey-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"49","unit":"MPa"}},"obs-5f455cb2ad99c3692883":{"legacy_record_id":"stainless-therma-314-4841-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"86","unit":"MPa"}},"obs-5fb6ed6953ebcd2fd009":{"legacy_record_id":"cu-c11000-reference","source_value":{"offset_to_si":0,"scale_to_si":4186.8,"significant_figures":2,"text":".092","unit":"Btu/(lb·°F)"}},"obs-5fd4d054c45efc92e617":{"legacy_record_id":"stainless-supra-316l-4435-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"40","unit":"%"}},"obs-5fe2ee70f52990f8366b":{"legacy_record_id":"steel-atlas-6580-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"11","unit":"%"}},"obs-5ff8f4e4e82c086cf32c":{"legacy_record_id":"tecamid-6-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"78","unit":"MPa"}},"obs-6039d2f8cc6a74a312e7":{"legacy_record_id":"tecadur-pet-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"91","unit":"MPa"}},"obs-6058dd875aa30d523355":{"legacy_record_id":"al-6063-t4","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"130","unit":"MPa"}},"obs-60cf2cc4544807bb0b2a":{"legacy_record_id":"tecatron-pvx-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"4,600","unit":"MPa"}},"obs-60d550b3eb5ed2c8803a":{"legacy_record_id":"tecaform-ah-els-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"42","unit":"MPa"}},"obs-6107ee9d6bacd874379a":{"legacy_record_id":"tecam-6-mo-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.14","unit":"g/cm³"}},"obs-6110d016332a07b16dd1":{"legacy_record_id":"stainless-therma-314-4841-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"420","unit":"MPa"}},"obs-6111d48f77a0436f1e94":{"legacy_record_id":"stainless-supra-316-4436-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"240","unit":"MPa"}},"obs-6120e4089b15b89f358e":{"legacy_record_id":"nickel-ultra-alloy-825-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"240","unit":"MPa"}},"obs-616deb5a5a79c1ad69ac":{"legacy_record_id":"tecapeek-cf30-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.38","unit":"g/cm³"}},"obs-617b87beb64bfacb2739":{"legacy_record_id":"steel-uddeholm-arne-hardened-and-tempered-62-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"32","unit":"W/(m·°C)"}},"obs-619fc088619095da65d6":{"legacy_record_id":"coorstek-rbb4c-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"250","unit":"MPa"}},"obs-61b364a238477ff16921":{"legacy_record_id":"stainless-therma-309s-4833-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.8","unit":"kg/dm³"}},"obs-61b744cd58ad72c33999":{"legacy_record_id":"tecatron-pvx-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"1.5","unit":"g/cm³"}},"obs-61c66cd4ee2eb05021fe":{"legacy_record_id":"tecapeek-pvx-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"3","unit":"%"}},"obs-61c75b39627faf9d1868":{"legacy_record_id":"stainless-therma-321h-4878-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"132","unit":"MPa"}},"obs-61febb1e096df5976ced":{"legacy_record_id":"stainless-therma-347h-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"340","unit":"MPa"}},"obs-61ffc8b41e9bce9de2a3":{"legacy_record_id":"tecaform-ad-af-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"3,000","unit":"MPa"}},"obs-62184eb2707eb9f70e5e":{"legacy_record_id":"stainless-therma-314-4841-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.8","unit":"kg/dm³"}},"obs-626334923ea9dbf32f47":{"legacy_record_id":"tecapet-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"79","unit":"MPa"}},"obs-62834de591dd3abfeab6":{"legacy_record_id":"stainless-supra-444-4521-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"320","unit":"MPa"}},"obs-62a46e2dc68c2bbfe084":{"legacy_record_id":"tecadur-pet-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"134","unit":"MPa"}},"obs-62d459b881a28211ec71":{"legacy_record_id":"steel-atlas-4340-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1000–1150","unit":"MPa"}},"obs-62dbcbb77f5ec1b5726e":{"legacy_record_id":"tecanat-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.19","unit":"g/cm³"}},"obs-62e5c66d65b66f38a737":{"legacy_record_id":"tecamid-6-gf30-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.36","unit":"g/cm³"}},"obs-62eac411dc72ea547389":{"legacy_record_id":"al-6005-t1","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"180","unit":"W/(m·K)"}},"obs-62efe838a35812fbba5a":{"legacy_record_id":"tecamid-66-mh-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"40","unit":"%"}},"obs-631881f39d3bd60c7e94":{"legacy_record_id":"al-6082-t6","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"310","unit":"MPa"}},"obs-631bf34efcdc0f4f75f2":{"legacy_record_id":"tecast-tm-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"55","unit":"%"}},"obs-6320db814e1845e70abc":{"legacy_record_id":"tecasint-2391-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"137","unit":"MPa"}},"obs-636f9dc92e60ee5bdf5e":{"legacy_record_id":"al-1060-h112","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"15","unit":"MPa"}},"obs-637e77f4a7bfccec9b29":{"legacy_record_id":"tecaform-ad-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.43","unit":"W/(m·K)"}},"obs-639024015fb51dfc3b00":{"legacy_record_id":"stainless-therma-253-ma-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"170","unit":"MPa"}},"obs-63aba61605a9bce010fb":{"legacy_record_id":"coorstek-porcelain-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"5.0","unit":"W/(m·K)"}},"obs-63b19be9be9676530c8d":{"legacy_record_id":"al-6262-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":2,"text":"0.098","unit":"lb/in³"}},"obs-63f778590aa898cfd1aa":{"legacy_record_id":"nickel-ultra-alloy-825-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"195","unit":"GPa"}},"obs-6450edee19d9226ccd95":{"legacy_record_id":"stainless-therma-309s-4833-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"86","unit":"MPa"}},"obs-646d4373d3c8757b7e23":{"legacy_record_id":"steel-uddeholm-rigor-hardened-and-tempered-62-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":4,"text":"7650","unit":"kg/m³"}},"obs-64a139e0d205ba9c1f1f":{"legacy_record_id":"coorstek-ultrasic-sc-30-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.21","unit":"1"}},"obs-64dfa5515af67cef5b74":{"legacy_record_id":"al-6082-t6","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"6","unit":"%"}},"obs-650c75bf6a3284d62824":{"legacy_record_id":"coorstek-nbd-200-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"3.16","unit":"g/cm³"}},"obs-652751ffce9317313275":{"legacy_record_id":"steel-uddeholm-dievar-hardened-and-tempered-52-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1560","unit":"MPa"}},"obs-6535a1cce32fe86a7bb3":{"legacy_record_id":"tecadur-pet-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"3,300","unit":"MPa"}},"obs-65484fbb03e270afa458":{"legacy_record_id":"tecapet-tf-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.43","unit":"g/cm³"}},"obs-654ba4220204c865be84":{"legacy_record_id":"al-6005-t1","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"105","unit":"MPa"}},"obs-65526e436b172a263e98":{"legacy_record_id":"stainless-therma-310s-4845-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.8","unit":"kg/dm³"}},"obs-659a841ed80571d15f69":{"legacy_record_id":"al-6005a-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":2,"text":"0.098","unit":"lb/in³"}},"obs-65e5f52338938d1e3496":{"legacy_record_id":"stainless-core-304l-4307-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"220","unit":"MPa"}},"obs-660f2f55fdc8baa006a8":{"legacy_record_id":"tecamid-66-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.36","unit":"W/(m·K)"}},"obs-6652d25bffd439d5fe83":{"legacy_record_id":"tecapeek-pvx-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"142","unit":"MPa"}},"obs-66624f8e84108f0882a1":{"legacy_record_id":"steel-atlas-6657-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"880–1180","unit":"MPa"}},"obs-667d233e6ecab44b54b2":{"legacy_record_id":"stainless-forta-sdx-100-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"750–1000","unit":"MPa"}},"obs-66a0a7a65a6ae28ff199":{"legacy_record_id":"tecanat-gf30-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"4,400","unit":"MPa"}},"obs-66aee9834fa0cd7e0c49":{"legacy_record_id":"stainless-therma-321h-4878-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"127","unit":"MPa"}},"obs-66d2f68f0ee50bd8d363":{"legacy_record_id":"al-6262-t6","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"10","unit":"%"}},"obs-66ee4463df05283c990d":{"legacy_record_id":"stainless-forta-ldx-2101-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-66f14660a922c0fa4a41":{"legacy_record_id":"nickel-ultra-alloy-825-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"8.1","unit":"kg/dm³"}},"obs-67007a408b79d9f01128":{"legacy_record_id":"tecator-5031-pvx-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"7","unit":"%"}},"obs-672122ace9bd74a256da":{"legacy_record_id":"coorstek-ad-94-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.21","unit":"1"}},"obs-6780ecd507a82cd2a678":{"legacy_record_id":"stainless-therma-347h-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"121","unit":"MPa"}},"obs-679adc20d63860e46201":{"legacy_record_id":"stainless-forta-dx-2304-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"650–850","unit":"MPa"}},"obs-67b6f89cd1fce0d7c0ac":{"legacy_record_id":"tecaform-ah-mt-coloured-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"69","unit":"MPa"}},"obs-67c355e87e85f0605ccb":{"legacy_record_id":"stainless-therma-4828-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"420","unit":"MPa"}},"obs-67c5c3a1fe7686ddb84c":{"legacy_record_id":"stainless-core-201ln-4372-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"200","unit":"GPa"}},"obs-68123a202fd1fc43f110":{"legacy_record_id":"al-6082-t6","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"310","unit":"MPa"}},"obs-68380a7a1e1bd030d82f":{"legacy_record_id":"coorstek-ytzp-hiped-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1720","unit":"MPa"}},"obs-686200624bc09fccb223":{"legacy_record_id":"coorstek-dura-z-ttz-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"2.2","unit":"W/(m·K)"}},"obs-686e6f7a95b916bcfb8b":{"legacy_record_id":"tecadur-pet-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"91","unit":"MPa"}},"obs-68b4714ce0df731fb812":{"legacy_record_id":"al-6005a-t61","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"10","unit":"%"}},"obs-68cce0ef9ad4bb2024b7":{"legacy_record_id":"tecasint-1611-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"4.1","unit":"%"}},"obs-68f5f66d683ffac64e5e":{"legacy_record_id":"tecafine-pmp-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"0.83","unit":"g/cm³"}},"obs-692175ab7ccff2a6ae21":{"legacy_record_id":"al-6063-t4","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"193","unit":"W/(m·K)"}},"obs-696bca6f64761b2db7a6":{"legacy_record_id":"tecator-5013-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"1.4","unit":"g/cm³"}},"obs-69a3a8ba4aa7c4fe44ac":{"legacy_record_id":"steel-atlas-12l14fm-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"430","unit":"MPa"}},"obs-69a63e6173e06d4de544":{"legacy_record_id":"tecasint-1031-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.57","unit":"g/cm³"}},"obs-69f45472cc39b935bdaf":{"legacy_record_id":"stainless-therma-4828-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"385","unit":"MPa"}},"obs-69fdf474e2f71176710f":{"legacy_record_id":"tecapeek-tf10-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"95","unit":"MPa"}},"obs-6a31778f8efc4315e669":{"legacy_record_id":"ti-6246-sta","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1103","unit":"MPa"}},"obs-6a3599a07eb4b86d9d7f":{"legacy_record_id":"cu-c64200-reference","source_value":{"offset_to_si":0,"scale_to_si":1.730734666295328,"significant_figures":2,"text":"26","unit":"Btu/(ft·hr·°F)"}},"obs-6a5d8af50109347176b7":{"legacy_record_id":"cu-c10100-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":".323","unit":"lb/in³"}},"obs-6a69918983334bea02b6":{"legacy_record_id":"stainless-therma-304h-4948-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"142","unit":"MPa"}},"obs-6ac3661b9a2ce2f484f8":{"legacy_record_id":"cu-c71500-reference","source_value":{"offset_to_si":0,"scale_to_si":4186.8,"significant_figures":1,"text":".09","unit":"Btu/(lb·°F)"}},"obs-6afa4f1665a50e1e8a6c":{"legacy_record_id":"tecatec-peek-cw50-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"813","unit":"MPa"}},"obs-6b053a9fde9dd7b0face":{"legacy_record_id":"coorstek-ultrasic-sc-30-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"410","unit":"GPa"}},"obs-6b135a3774ee4703d102":{"legacy_record_id":"tecasint-2391-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.54","unit":"g/cm³"}},"obs-6b2392381cd26f1834a2":{"legacy_record_id":"al-6105-t5","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"193","unit":"W/(m·K)"}},"obs-6b6c95e52aee2c349f6a":{"legacy_record_id":"tecaform-ah-gf25-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"51","unit":"MPa"}},"obs-6bb37a0711d82e2a812d":{"legacy_record_id":"coorstek-ytzp-sintered-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1240","unit":"MPa"}},"obs-6bc654ef62ff12fbd44a":{"legacy_record_id":"stainless-supra-316ti-4571-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"200","unit":"GPa"}},"obs-6bcca6cd85f719ff3008":{"legacy_record_id":"coorstek-ad-85-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"3.42","unit":"g/cm³"}},"obs-6c330c0bf3a864fbceaa":{"legacy_record_id":"tecapeek-id-blue-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"6","unit":"%"}},"obs-6c9a765ffd9cc12f393f":{"legacy_record_id":"stainless-core-305-4303-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"200","unit":"GPa"}},"obs-6cdfd2c8059963ed3631":{"legacy_record_id":"stainless-core-305-4303-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.9","unit":"kg/dm³"}},"obs-6cf1364d7aec38926d2b":{"legacy_record_id":"al-1060-h112","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"60","unit":"MPa"}},"obs-6cf1c31943382512e7c6":{"legacy_record_id":"steel-atlas-6580-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"12","unit":"%"}},"obs-6d42f0e26d30ce5bdb93":{"legacy_record_id":"stainless-therma-253-ma-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"26","unit":"W/(m·K)"}},"obs-6d78ad726142bdd23b9b":{"legacy_record_id":"tecanyl-mt-coloured-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"65","unit":"MPa"}},"obs-6d959ea06ae11b9f3b42":{"legacy_record_id":"tecapeek-ts-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"5,700","unit":"MPa"}},"obs-6dfeccb4635fad968611":{"legacy_record_id":"tecatron-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"151","unit":"MPa"}},"obs-6e0582a0ff4dd1abc7d5":{"legacy_record_id":"tecaform-ad-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.43","unit":"g/cm³"}},"obs-6e0df2154c1d804a6fde":{"legacy_record_id":"steel-atlas-4340-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"12","unit":"%"}},"obs-6e14616f838e1780b357":{"legacy_record_id":"stainless-therma-253-ma-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"160","unit":"MPa"}},"obs-6e1a474b8152e580b8ea":{"legacy_record_id":"stainless-therma-253-ma-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"560","unit":"MPa"}},"obs-6e3bddbbb22fab1f701d":{"legacy_record_id":"ti-6al-4v-mill-annealed","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"6.6","unit":"W/(m·K)"}},"obs-6e4788d7f2265e096de7":{"legacy_record_id":"al-6063-t1","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"55","unit":"MPa"}},"obs-6e5c0c9d68f9f82b0d84":{"legacy_record_id":"tecapeek-cf30-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.66","unit":"W/(m·K)"}},"obs-6e78361197e3ab7a19c1":{"legacy_record_id":"ti-6246-sta","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1172","unit":"MPa"}},"obs-6eca42f4c014a03e2a13":{"legacy_record_id":"tecatec-peek-cw50-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":5,"text":"53,200","unit":"MPa"}},"obs-6ee6db66ecc4a3c82ebf":{"legacy_record_id":"steel-uddeholm-dievar-hardened-and-tempered-48-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1380","unit":"MPa"}},"obs-6eec5dfb9fe3f856dffe":{"legacy_record_id":"coorstek-ad-96-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.21","unit":"1"}},"obs-6f132c00725441e6f2de":{"legacy_record_id":"coorstek-ad-94-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"303","unit":"GPa"}},"obs-6f42203b49abeb704aed":{"legacy_record_id":"stainless-ultra-725ln-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"500","unit":"J/(kg·K)"}},"obs-6f47de9d69396a488f1a":{"legacy_record_id":"stainless-core-304-4301-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"200","unit":"GPa"}},"obs-6f5c35aa64a3c0528f73":{"legacy_record_id":"steel-atlas-6657-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"10","unit":"%"}},"obs-6f5ecc86e3f2b8decb61":{"legacy_record_id":"steel-atlas-8620h-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"10","unit":"%"}},"obs-6f82cf83caf9c7b9bb0d":{"legacy_record_id":"stainless-therma-310s-4845-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-6f88d5afaaec5e1bb177":{"legacy_record_id":"steel-uddeholm-dievar-hardened-and-tempered-52-hrc","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":3,"text":"12.5","unit":"%"}},"obs-6f90c478839384e6a3cd":{"legacy_record_id":"stainless-therma-4828-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"405","unit":"MPa"}},"obs-6fbf0756ea8c8ed3c0c2":{"legacy_record_id":"tecamid-46-redbrown-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"106","unit":"MPa"}},"obs-6fd8c72b6132438d4d24":{"legacy_record_id":"al-1350-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":"0.0975","unit":"lb/in³"}},"obs-6fe2da9811b9622214e2":{"legacy_record_id":"al-6005a-t61","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"188","unit":"W/(m·K)"}},"obs-7013b0822c9683f9edd8":{"legacy_record_id":"coorstek-nbd-200-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.26","unit":"1"}},"obs-70845c5a39bfeafb4ce3":{"legacy_record_id":"tecapeek-ts-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.49","unit":"g/cm³"}},"obs-708bfca73525c65c7123":{"legacy_record_id":"tecaflon-pvdf-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.25","unit":"W/(m·K)"}},"obs-70969a2ed8bbdc200fde":{"legacy_record_id":"steel-atlas-4140-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"850–1000","unit":"MPa"}},"obs-712f7694703c5a67c3c5":{"legacy_record_id":"tecapet-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"121","unit":"MPa"}},"obs-71b77a95f8b8e2492e0c":{"legacy_record_id":"tecasint-4021-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.49","unit":"g/cm³"}},"obs-71c928dd6a8ca8be8496":{"legacy_record_id":"tecasint-4111-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"7,000","unit":"MPa"}},"obs-71db7844ce19658f648f":{"legacy_record_id":"tecapet-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"79","unit":"MPa"}},"obs-722ea7f32015cd33dc56":{"legacy_record_id":"tecasint-1031-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"88","unit":"MPa"}},"obs-7235a172a05af6e3c321":{"legacy_record_id":"al-6005a-t1","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"100","unit":"MPa"}},"obs-72367cae78100442f470":{"legacy_record_id":"coorstek-ad-96-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"24.7","unit":"W/(m·K)"}},"obs-7297db04a6a34b866916":{"legacy_record_id":"stainless-ultra-317l-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"14","unit":"W/(m·K)"}},"obs-72b86e5154eb3de4a96d":{"legacy_record_id":"cu-c46400-reference","source_value":{"offset_to_si":0,"scale_to_si":4186.8,"significant_figures":1,"text":".09","unit":"Btu/(lb·°F)"}},"obs-72df3119013dff085638":{"legacy_record_id":"tecason-p-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"81","unit":"MPa"}},"obs-73004fa697ccf7549fb7":{"legacy_record_id":"tecamid-66-la-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.36","unit":"W/(m·K)"}},"obs-731e555a4477ed42a074":{"legacy_record_id":"tecasint-4011-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"130","unit":"MPa"}},"obs-73546f7b0989c3d83813":{"legacy_record_id":"tecamid-66-la-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"76","unit":"MPa"}},"obs-735ad6b3ec17002e21f2":{"legacy_record_id":"stainless-therma-314-4841-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"25","unit":"W/(m·K)"}},"obs-73bf2c02e234728baf0f":{"legacy_record_id":"coorstek-fg-995-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"350","unit":"GPa"}},"obs-73df096c52dc3dad7edb":{"legacy_record_id":"stainless-core-301-4310-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-741d9ea378875c96e247":{"legacy_record_id":"stainless-core-441-4509-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"250","unit":"MPa"}},"obs-744cf85124fa156a2f30":{"legacy_record_id":"steel-atlas-m1030-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"11","unit":"%"}},"obs-745247089afcd8de0173":{"legacy_record_id":"al-6063-t1","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"110","unit":"MPa"}},"obs-749a2330a986b7e30ab7":{"legacy_record_id":"tecadur-pbt-gf30-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"46","unit":"MPa"}},"obs-74e21dd57ffa08eea4c4":{"legacy_record_id":"al-6082-t6","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"172","unit":"W/(m·K)"}},"obs-74ed2ba6f44ae4c91c6d":{"legacy_record_id":"steel-uddeholm-arne-hardened-and-tempered-62-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"460","unit":"J/(kg·°C)"}},"obs-7528aa27b8777c00c29a":{"legacy_record_id":"stainless-therma-321h-4878-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"118","unit":"MPa"}},"obs-7554e57e76a60425cea7":{"legacy_record_id":"coorstek-zta-10-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"885","unit":"J/(kg·K)"}},"obs-758778922df84b1ad26e":{"legacy_record_id":"tecason-p-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"50","unit":"%"}},"obs-75b661fc71a079fb7e97":{"legacy_record_id":"coorstek-ytzp-hiped-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"2.2","unit":"W/(m·K)"}},"obs-7663489849cf8f1848ae":{"legacy_record_id":"stainless-supra-316l-4432-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"8.0","unit":"kg/dm³"}},"obs-76c071b4857f884b220e":{"legacy_record_id":"stainless-core-321-4541-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"200","unit":"GPa"}},"obs-773f3a6922b44dec41d4":{"legacy_record_id":"steel-atlas-6587-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1180–1420","unit":"MPa"}},"obs-77738113fceb5ca5e4de":{"legacy_record_id":"coorstek-fg-995-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.22","unit":"1"}},"obs-77776f78b2e79700f9d3":{"legacy_record_id":"tecaform-ah-gf25-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"88","unit":"MPa"}},"obs-779e01f7294fd0a5eadd":{"legacy_record_id":"steel-atlas-6582-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"750–900","unit":"MPa"}},"obs-77aa6febd402dd98bf5f":{"legacy_record_id":"cu-c64200-reference","source_value":{"offset_to_si":0,"scale_to_si":4186.8,"significant_figures":1,"text":".09","unit":"Btu/(lb·°F)"}},"obs-7804cb212c9c82c1b12c":{"legacy_record_id":"steel-atlas-1045-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"650","unit":"MPa"}},"obs-787277d71983cbf4d205":{"legacy_record_id":"cu-c23000-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":".316","unit":"lb/in³"}},"obs-7880b2bd373d656e83ff":{"legacy_record_id":"tecasint-2031-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"2.1","unit":"%"}},"obs-7895e76ced1a0290a847":{"legacy_record_id":"tecapeek-els-nano-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"106","unit":"MPa"}},"obs-78a0a042adcac664c44f":{"legacy_record_id":"tecasint-1021-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"97","unit":"MPa"}},"obs-78ee5e5dd199df47e9e1":{"legacy_record_id":"coorstek-mullite-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"170","unit":"MPa"}},"obs-78eeecbcbb379a3dfc80":{"legacy_record_id":"tecaran-abs-grey-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"49","unit":"%"}},"obs-7923b0bc0445df178f37":{"legacy_record_id":"stainless-forta-dx-2304-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-7925c826ae45dca2910c":{"legacy_record_id":"cu-c28000-reference","source_value":{"offset_to_si":0,"scale_to_si":4186.8,"significant_figures":1,"text":".09","unit":"Btu/(lb·°F)"}},"obs-7967f5143ca5b75c1156":{"legacy_record_id":"coorstek-sn-101c-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.27","unit":"1"}},"obs-79739b6d1fcca3a2c2c3":{"legacy_record_id":"stainless-supra-316ti-4571-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"8.0","unit":"kg/dm³"}},"obs-7975527240b3e33f64a0":{"legacy_record_id":"stainless-supra-316-4436-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-79a6911093d49b40a642":{"legacy_record_id":"stainless-ultra-654-smo-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"500","unit":"J/(kg·K)"}},"obs-79c8e4936f6b57c5c408":{"legacy_record_id":"al-1100-o","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":3,"text":"25.0","unit":"%"}},"obs-79d38f4f0150afb1dc63":{"legacy_record_id":"tecafine-pmp-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"26","unit":"MPa"}},"obs-79feb542bb8cc82a8082":{"legacy_record_id":"stainless-forta-sdx-100-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.8","unit":"kg/dm³"}},"obs-7a04138bfea70f979852":{"legacy_record_id":"tecapeek-ts-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"4","unit":"%"}},"obs-7a4272806d4f0b9bca61":{"legacy_record_id":"coorstek-ad-96-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"880","unit":"J/(kg·K)"}},"obs-7a9e1605e34b4f77f440":{"legacy_record_id":"tecanat-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"90","unit":"%"}},"obs-7ac5bc56b9de6d042c93":{"legacy_record_id":"stainless-therma-309s-4833-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"385","unit":"MPa"}},"obs-7b0c54ec569885c73a13":{"legacy_record_id":"tecasint-1061-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"77","unit":"MPa"}},"obs-7b141a9cdc178dc009ae":{"legacy_record_id":"steel-uddeholm-caldie-hardened-and-tempered-60-61-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"192000","unit":"MPa"}},"obs-7b422c347b20807a7a8e":{"legacy_record_id":"coorstek-puresic-cvd-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"435–460","unit":"GPa"}},"obs-7b780aa253e438aca9e7":{"legacy_record_id":"stainless-ultra-6xn-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"8.1","unit":"kg/dm³"}},"obs-7b97ef7900f39bce04b3":{"legacy_record_id":"tecasint-4121-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.53","unit":"g/cm³"}},"obs-7b9fb4ef797bafd80eda":{"legacy_record_id":"stainless-therma-4828-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"86","unit":"MPa"}},"obs-7bb44bb89589ec073b1a":{"legacy_record_id":"tecasint-5201-sd-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"85","unit":"MPa"}},"obs-7be93f2e6cc13d8fd14b":{"legacy_record_id":"tecason-p-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"107","unit":"MPa"}},"obs-7c1184a55dbed88844c2":{"legacy_record_id":"tecapeek-cf30-mt-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.42","unit":"g/cm³"}},"obs-7c360ba3d4097c212928":{"legacy_record_id":"steel-atlas-6657-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"9","unit":"%"}},"obs-7c49e560079cf24fda1b":{"legacy_record_id":"stainless-forta-ldx-2101-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"700–900","unit":"MPa"}},"obs-7c579fcc8fc28f7ed880":{"legacy_record_id":"stainless-supra-316l-4404-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"8.0","unit":"kg/dm³"}},"obs-7c5f2e8e7406b8fa2361":{"legacy_record_id":"tecamid-66-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"110","unit":"MPa"}},"obs-7c638d352729283a6af5":{"legacy_record_id":"steel-atlas-1214fm-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"7","unit":"%"}},"obs-7c79a7bba1b28d6a5d79":{"legacy_record_id":"stainless-supra-316ti-4571-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"540–690","unit":"MPa"}},"obs-7c7ad601a9e71477be44":{"legacy_record_id":"tecapeek-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"4,200","unit":"MPa"}},"obs-7c93b5563829a430b062":{"legacy_record_id":"stainless-core-304-4301-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"45","unit":"%"}},"obs-7cc0ff64ac6b78ff26fa":{"legacy_record_id":"tecaform-ah-gf25-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"12","unit":"%"}},"obs-7ccea175f22b4d9c9c6c":{"legacy_record_id":"stainless-therma-4828-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"450","unit":"MPa"}},"obs-7cfce8c7455f0edafbc0":{"legacy_record_id":"steel-atlas-4140-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"850–1000","unit":"MPa"}},"obs-7cfeeae3853ddf32c410":{"legacy_record_id":"steel-uddeholm-dievar-hardened-and-tempered-44-46-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"32","unit":"W/(m·°C)"}},"obs-7d0eb3d90ce2a03a4f0d":{"legacy_record_id":"stainless-forta-dx-2205-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"500","unit":"J/(kg·K)"}},"obs-7d2d4c07b16c748ee79a":{"legacy_record_id":"steel-uddeholm-rigor-hardened-and-tempered-62-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":4,"text":"7750","unit":"kg/m³"}},"obs-7d462f6bb379d5af6d7d":{"legacy_record_id":"al-6082-t6","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"172","unit":"W/(m·K)"}},"obs-7d5c06aa2edb3439ccf5":{"legacy_record_id":"ti-6al-4v-mill-annealed","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"10.6","unit":"W/(m·K)"}},"obs-7daa204d4a7ea6868799":{"legacy_record_id":"coorstek-plasmapure-uc-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.22","unit":"1"}},"obs-7dc1917cd73dbfd05184":{"legacy_record_id":"stainless-ultra-317l-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"200","unit":"GPa"}},"obs-7de19268c0fe5fd1da7d":{"legacy_record_id":"al-6005-t1","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"16","unit":"%"}},"obs-7dfeb7d877d1564073cc":{"legacy_record_id":"coorstek-ad-90-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"920","unit":"J/(kg·K)"}},"obs-7e00062653adb48f4207":{"legacy_record_id":"tecast-t-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"55","unit":"%"}},"obs-7e218a08bb0ed0099a1b":{"legacy_record_id":"tecason-p-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.31","unit":"g/cm³"}},"obs-7e7c9e8331a942aecef9":{"legacy_record_id":"coorstek-sc-rb-sc-2-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":4,"text":"125.0","unit":"W/(m·K)"}},"obs-7e83a09c30e6874f9f4e":{"legacy_record_id":"stainless-therma-314-4841-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"400","unit":"MPa"}},"obs-7e96da16cc9bc820320d":{"legacy_record_id":"stainless-therma-321h-4878-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"21","unit":"W/(m·K)"}},"obs-7e9e062a8ec5486ec308":{"legacy_record_id":"stainless-supra-316l-4404-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"240","unit":"MPa"}},"obs-7eee9258893b767ee027":{"legacy_record_id":"al-1100-o","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"20","unit":"MPa"}},"obs-7f73b4110901d5ce80f2":{"legacy_record_id":"ti-6al-2sn-4zr-6mo-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"100","unit":"GPa"}},"obs-7fb6dbf786c1dff49e25":{"legacy_record_id":"tecafine-pmp-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1,000","unit":"MPa"}},"obs-7fd0d11031ccf2f58609":{"legacy_record_id":"tecatron-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"102","unit":"MPa"}},"obs-800fc479dfd61e7d94a7":{"legacy_record_id":"stainless-supra-316plus-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"200","unit":"GPa"}},"obs-80318e3f55e2bae7a43f":{"legacy_record_id":"steel-atlas-6587-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"7","unit":"%"}},"obs-8038570b1bec65002489":{"legacy_record_id":"tecapeek-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"175","unit":"MPa"}},"obs-80470019191755a513d8":{"legacy_record_id":"tecanat-gf30-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"85","unit":"MPa"}},"obs-808acf1310f5d5e983ce":{"legacy_record_id":"coorstek-ad-96-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"3.72","unit":"g/cm³"}},"obs-80aa37f742a222df594c":{"legacy_record_id":"al-6101-t64","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"100","unit":"MPa"}},"obs-80b13ab0df2e26160010":{"legacy_record_id":"tecator-5013-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"21","unit":"%"}},"obs-80c592c3550ae3d36904":{"legacy_record_id":"cu-c48500-reference","source_value":{"offset_to_si":0,"scale_to_si":4186.8,"significant_figures":1,"text":".09","unit":"Btu/(lb·°F)"}},"obs-80cc924cf73c2de38e1b":{"legacy_record_id":"stainless-forta-ldx-2101-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"20","unit":"%"}},"obs-80e1b07e4f4885c991eb":{"legacy_record_id":"steel-uddeholm-dievar-hardened-and-tempered-44-46-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"180000","unit":"MPa"}},"obs-80f20bf9d46f35833c58":{"legacy_record_id":"coorstek-hp-aln-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"80.0","unit":"W/(m·K)"}},"obs-811ce2ab70f436207c4e":{"legacy_record_id":"stainless-therma-347h-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"130","unit":"MPa"}},"obs-8183598d1c4e2a18e2de":{"legacy_record_id":"tecapeek-ht-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.31","unit":"g/cm³"}},"obs-818515493604a2100f8f":{"legacy_record_id":"stainless-therma-253-ma-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"165","unit":"MPa"}},"obs-818dc14c6da432c58914":{"legacy_record_id":"tecamid-66-hi-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.15","unit":"g/cm³"}},"obs-820748938a8a4cf790cd":{"legacy_record_id":"coorstek-hp-aln-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"340","unit":"MPa"}},"obs-820fd5c5d135de94b7dc":{"legacy_record_id":"coorstek-plasmapure-uc-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"3.92","unit":"g/cm³"}},"obs-823206892f5ebffc9450":{"legacy_record_id":"stainless-core-4622-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"460","unit":"J/(kg·K)"}},"obs-82addd609a46d5e58288":{"legacy_record_id":"coorstek-sn-101c-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"34","unit":"W/(m·K)"}},"obs-8329624356ce48698cb4":{"legacy_record_id":"tecanyl-mt-coloured-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.21","unit":"W/(m·K)"}},"obs-833ae1e750b75023f6a5":{"legacy_record_id":"tecaform-ah-gf25-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.47","unit":"W/(m·K)"}},"obs-834bc8b446326c7c30cd":{"legacy_record_id":"tecapeek-gf30-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"6,400","unit":"MPa"}},"obs-8379b26872622073b7a7":{"legacy_record_id":"tecapeek-classix-white-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"177","unit":"MPa"}},"obs-8405746aa77695faf100":{"legacy_record_id":"stainless-forta-dx-2205-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-84306fa61f48b42a95c7":{"legacy_record_id":"tecapei-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"127","unit":"MPa"}},"obs-84491af69cf326402eaa":{"legacy_record_id":"stainless-forta-edx-2304-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.8","unit":"kg/dm³"}},"obs-84abc4194648453754b2":{"legacy_record_id":"steel-atlas-1045-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"500","unit":"MPa"}},"obs-84b0583516aa889d96ba":{"legacy_record_id":"stainless-therma-304h-4948-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"125","unit":"GPa"}},"obs-84c11f46feb498a87998":{"legacy_record_id":"coorstek-plasmapure-ad-998-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"380","unit":"GPa"}},"obs-84d674d2e681dd592d9a":{"legacy_record_id":"stainless-therma-347h-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"350","unit":"MPa"}},"obs-84fb1d9bed8a703043db":{"legacy_record_id":"tecator-5031-pvx-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"5,900","unit":"MPa"}},"obs-85023a0091923ebb7fe9":{"legacy_record_id":"ti-6al-4v-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"0.580","unit":"J/(g·K)"}},"obs-855a3f5d4ddf7966b575":{"legacy_record_id":"stainless-therma-314-4841-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"470","unit":"MPa"}},"obs-85817751852a1f149598":{"legacy_record_id":"steel-atlas-1214fm-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"8","unit":"%"}},"obs-85c5919170e9f5e0c03a":{"legacy_record_id":"coorstek-dura-z-ttz-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.30","unit":"1"}},"obs-85c9327cfb8ae686d01f":{"legacy_record_id":"stainless-core-301-4310-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"500","unit":"J/(kg·K)"}},"obs-85d368b2ca800f0338ca":{"legacy_record_id":"coorstek-fg-995-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"3.80","unit":"g/cm³"}},"obs-86053d75e012ece7a3e3":{"legacy_record_id":"stainless-core-347-4550-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"200","unit":"GPa"}},"obs-860ad9c1c8bb660ef26e":{"legacy_record_id":"steel-uddeholm-dievar-hardened-and-tempered-48-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1640","unit":"MPa"}},"obs-8690b2a3b38e418ebbd8":{"legacy_record_id":"steel-uddeholm-dievar-hardened-and-tempered-44-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1480","unit":"MPa"}},"obs-86a03871f5b1ad1936d9":{"legacy_record_id":"steel-atlas-m1020-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"370","unit":"MPa"}},"obs-86b315a003162b118ee1":{"legacy_record_id":"tecaform-ah-id-blue-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.49","unit":"g/cm³"}},"obs-86f460c27b3786c43822":{"legacy_record_id":"stainless-supra-444-4521-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"430","unit":"J/(kg·K)"}},"obs-873565359fcbfd841f9e":{"legacy_record_id":"stainless-therma-253-ma-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.8","unit":"kg/dm³"}},"obs-877fc7b2ee3448dc261f":{"legacy_record_id":"stainless-forta-sdx-2507-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"200","unit":"GPa"}},"obs-8796ae1fa0aa6979d346":{"legacy_record_id":"coorstek-ytzp-sintered-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"210","unit":"GPa"}},"obs-87b0b0ef1a6bb853aade":{"legacy_record_id":"stainless-therma-321h-4878-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-87e00e160919f4606930":{"legacy_record_id":"tecapet-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.36","unit":"g/cm³"}},"obs-88052902872016a8d2b6":{"legacy_record_id":"tecasint-4011-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"180","unit":"MPa"}},"obs-88853cce02c57bed1dfb":{"legacy_record_id":"stainless-therma-253-ma-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"585","unit":"MPa"}},"obs-889cfd36f6375b3b1457":{"legacy_record_id":"tecaform-ah-sd-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"23","unit":"%"}},"obs-88c14500c629db356d85":{"legacy_record_id":"stainless-therma-314-4841-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"150","unit":"GPa"}},"obs-88ca2b0bf760cf188ac4":{"legacy_record_id":"tecasint-1011-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"9.0","unit":"%"}},"obs-88df3fe22be4898de263":{"legacy_record_id":"stainless-core-441-4509-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"430–630","unit":"MPa"}},"obs-88eb3c517a68c8dd940c":{"legacy_record_id":"tecasint-5051-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"5,800","unit":"MPa"}},"obs-8909fafa773da1404553":{"legacy_record_id":"stainless-core-304l-4306-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"520–700","unit":"MPa"}},"obs-892cafc15530f29c472c":{"legacy_record_id":"tecast-l-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"2,900","unit":"MPa"}},"obs-897aaaafc49ca4aa2c24":{"legacy_record_id":"steel-atlas-m1030-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"410","unit":"MPa"}},"obs-899cd174d22ea4fd9fd7":{"legacy_record_id":"al-6105-t5","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"240","unit":"MPa"}},"obs-899f44a69688a929f002":{"legacy_record_id":"tecast-t-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"109","unit":"MPa"}},"obs-89bf39e016d0998a98a3":{"legacy_record_id":"tecanyl-gf30-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"5","unit":"%"}},"obs-8a1427fc5ac1f9d3d533":{"legacy_record_id":"tecator-5013-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"3,800","unit":"MPa"}},"obs-8a67c86177f8d3c1ef16":{"legacy_record_id":"al-6101-t64","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"226","unit":"W/(m·K)"}},"obs-8ab7e2f87dcde2023d25":{"legacy_record_id":"tecapeek-id-blue-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"4,600","unit":"MPa"}},"obs-8aff23fe1a9b36374065":{"legacy_record_id":"cu-c14300-reference","source_value":{"offset_to_si":0,"scale_to_si":4186.8,"significant_figures":2,"text":".092","unit":"Btu/(lb·°F)"}},"obs-8b22aeec54e6e001bed3":{"legacy_record_id":"tecaform-ad-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"79","unit":"MPa"}},"obs-8b453a52e1e6c63b061d":{"legacy_record_id":"nickel-ultra-alloy-825-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"590","unit":"MPa"}},"obs-8b82c398e7bf998ca35b":{"legacy_record_id":"tecasint-4121-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"6,600","unit":"MPa"}},"obs-8bf474a658b2efd26613":{"legacy_record_id":"tecasint-4111-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"100","unit":"MPa"}},"obs-8bfd2d8a5c13dd877379":{"legacy_record_id":"tecapeek-ht-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"120","unit":"MPa"}},"obs-8c08e197e987359e6604":{"legacy_record_id":"tecasint-8001-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.25","unit":"W/(m·K)"}},"obs-8c0c06a6c378b6ed1027":{"legacy_record_id":"stainless-therma-347h-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"335","unit":"MPa"}},"obs-8caabd6938545e11b11b":{"legacy_record_id":"al-1100-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":2,"text":"0.098","unit":"lb/in³"}},"obs-8ccdd108025b65bc97c9":{"legacy_record_id":"tecaform-ad-af-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"8","unit":"%"}},"obs-8d0fa05efd821eb97802":{"legacy_record_id":"steel-uddeholm-sverker-21-hardened-and-tempered-62-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"20.0","unit":"W/(m·°C)"}},"obs-8d9d14412c2881b159c8":{"legacy_record_id":"steel-uddeholm-sverker-21-hardened-and-tempered-62-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":4,"text":"7700","unit":"kg/m³"}},"obs-8dbf40d5913369f8b7ad":{"legacy_record_id":"ti-6al-4v-mill-annealed","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"17.5","unit":"W/(m·K)"}},"obs-8dd626c49befcbc7d436":{"legacy_record_id":"stainless-therma-309s-4833-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"25","unit":"W/(m·K)"}},"obs-8e0abf8ddb14aef6e207":{"legacy_record_id":"ti-6al-4v-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":".31","unit":"1"}},"obs-8e130343fe274764c573":{"legacy_record_id":"tecator-5013-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"151","unit":"MPa"}},"obs-8e26cc6c161034cca7a9":{"legacy_record_id":"stainless-therma-253-ma-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"515","unit":"MPa"}},"obs-8e528edf306c7135ae75":{"legacy_record_id":"steel-atlas-m1030-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"430","unit":"MPa"}},"obs-8e6e0c36469a525d8179":{"legacy_record_id":"stainless-ultra-254-smo-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"14","unit":"W/(m·K)"}},"obs-8e6e51ad2aca5d8ef007":{"legacy_record_id":"stainless-core-304-4301-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"500","unit":"J/(kg·K)"}},"obs-8e8c3d8f3a1e27e59ca0":{"legacy_record_id":"steel-uddeholm-orvar-supreme-hardened-and-tempered-45-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1280","unit":"MPa"}},"obs-8e8d9f197a61e86b99c9":{"legacy_record_id":"stainless-core-321-4541-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"500","unit":"J/(kg·K)"}},"obs-8e8fd63e1ccf3ef5dfd8":{"legacy_record_id":"tecapeek-id-blue-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"111","unit":"MPa"}},"obs-8ee395adce2a63cb707b":{"legacy_record_id":"stainless-therma-304h-4948-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"155","unit":"GPa"}},"obs-8f3bc6848eee3655a09d":{"legacy_record_id":"al-6005a-t5","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"215","unit":"MPa"}},"obs-8f483305f31002e51987":{"legacy_record_id":"tecaglide-green-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"103","unit":"MPa"}},"obs-8f4c877d3bd7d1dc0ad6":{"legacy_record_id":"stainless-forta-dx-2205-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"20","unit":"%"}},"obs-8f7c110c7784f0376f44":{"legacy_record_id":"stainless-therma-253-ma-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"21","unit":"W/(m·K)"}},"obs-8fe182116a6150980fea":{"legacy_record_id":"coorstek-puresic-cvd-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"3.21","unit":"g/cm³"}},"obs-90109a936492b6822574":{"legacy_record_id":"tecasint-1061-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"2.9","unit":"%"}},"obs-901de54c1081329ffa06":{"legacy_record_id":"tecanyl-mt-coloured-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"95","unit":"MPa"}},"obs-9068f7df024292b00402":{"legacy_record_id":"cu-c26000-reference","source_value":{"offset_to_si":0,"scale_to_si":4186.8,"significant_figures":1,"text":".09","unit":"Btu/(lb·°F)"}},"obs-9078a810691db8d7766f":{"legacy_record_id":"tecatron-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"4","unit":"%"}},"obs-90b5b6eb8762516112bc":{"legacy_record_id":"stainless-core-304ln-4311-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"40","unit":"%"}},"obs-90e5ad8c9b6dcd81d66f":{"legacy_record_id":"stainless-therma-310s-4845-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"19","unit":"W/(m·K)"}},"obs-9108c78ac40a6092abb2":{"legacy_record_id":"cu-c33000-reference","source_value":{"offset_to_si":0,"scale_to_si":4186.8,"significant_figures":1,"text":".09","unit":"Btu/(lb·°F)"}},"obs-910bd39e882c883c8d6e":{"legacy_record_id":"steel-uddeholm-rigor-hardened-and-tempered-62-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"185000","unit":"N/mm²"}},"obs-9110c9fb9378c2c84b51":{"legacy_record_id":"tecanyl-731-grey-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"85","unit":"MPa"}},"obs-9113247ccc20fd3b54cb":{"legacy_record_id":"tecanyl-731-grey-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"1.1","unit":"g/cm³"}},"obs-911cfe145e04ac8f4b31":{"legacy_record_id":"stainless-therma-310s-4845-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"116","unit":"MPa"}},"obs-914d37e7d9757aeb1424":{"legacy_record_id":"tecaform-ad-af-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"53","unit":"MPa"}},"obs-9153f722842e0615f81b":{"legacy_record_id":"tecanyl-mt-coloured-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"67","unit":"MPa"}},"obs-91738f21700f12f66503":{"legacy_record_id":"tecamid-66-cf20-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"104","unit":"MPa"}},"obs-917eaae5389e8ccd357e":{"legacy_record_id":"cu-c48500-reference","source_value":{"offset_to_si":0,"scale_to_si":1.730734666295328,"significant_figures":2,"text":"67","unit":"Btu/(ft·hr·°F)"}},"obs-91af8de77c4871dc1f47":{"legacy_record_id":"al-1350-h111","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"234","unit":"W/(m·K)"}},"obs-91c7cbc561a7677d5f6d":{"legacy_record_id":"steel-atlas-6587-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"685","unit":"MPa"}},"obs-91ce479003bc8adf3105":{"legacy_record_id":"tecaform-ah-sd-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"39","unit":"MPa"}},"obs-91e1589defef7c7240eb":{"legacy_record_id":"tecaglide-green-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"76","unit":"MPa"}},"obs-91e22b28f444e7194ea8":{"legacy_record_id":"coorstek-ad-85-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"221","unit":"GPa"}},"obs-920bba4b32e84bf5b287":{"legacy_record_id":"steel-atlas-6582-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1100–1300","unit":"MPa"}},"obs-9215e1c2f79951872661":{"legacy_record_id":"stainless-therma-309s-4833-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"100","unit":"MPa"}},"obs-928cba197ffabc06f753":{"legacy_record_id":"al-1100-o","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"75–105","unit":"MPa"}},"obs-92bff4244313a5b46db7":{"legacy_record_id":"al-6063-t4","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"70","unit":"MPa"}},"obs-92cfd8b9c4a30eb26a02":{"legacy_record_id":"tecanyl-gf30-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"116","unit":"MPa"}},"obs-92e5bcf4f8849f3d7ffe":{"legacy_record_id":"steel-atlas-6580-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1300–1450","unit":"MPa"}},"obs-92e9c26aa4c8413fe455":{"legacy_record_id":"tecapeek-mt-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"116","unit":"MPa"}},"obs-92eb212f2e111f2883ac":{"legacy_record_id":"stainless-forta-ldx-2404-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"205","unit":"GPa"}},"obs-92f1a51e7834e9b1a682":{"legacy_record_id":"tecaform-ah-els-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"42","unit":"MPa"}},"obs-934b4eb4b2940b2934c6":{"legacy_record_id":"cu-c65500-reference","source_value":{"offset_to_si":0,"scale_to_si":4186.8,"significant_figures":1,"text":".09","unit":"Btu/(lb·°F)"}},"obs-9382a0a829fb29e137f5":{"legacy_record_id":"tecamid-66-mh-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"114","unit":"MPa"}},"obs-9399db0955ebd775d242":{"legacy_record_id":"steel-atlas-1214fm-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"480","unit":"MPa"}},"obs-939d110ed42859b0b5ae":{"legacy_record_id":"cu-c17510-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":".319","unit":"lb/in³"}},"obs-9425bd56706cb12cc3c7":{"legacy_record_id":"al-6101-t6","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"170","unit":"MPa"}},"obs-944a33e72da58e83ce0d":{"legacy_record_id":"tecapeek-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.31","unit":"g/cm³"}},"obs-94decc163d0e0926d88d":{"legacy_record_id":"stainless-core-439m-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"220","unit":"GPa"}},"obs-94ffc65c5bb4a6f9f992":{"legacy_record_id":"tecasint-5051-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.57","unit":"g/cm³"}},"obs-955ec42cb0baf05950ae":{"legacy_record_id":"al-6063-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":2,"text":"0.097","unit":"lb/in³"}},"obs-95c5eb6071cf44396e7d":{"legacy_record_id":"stainless-core-301ln-4318-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"35","unit":"%"}},"obs-95ee13dad923c15edde0":{"legacy_record_id":"stainless-forta-edx-2304-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"500","unit":"MPa"}},"obs-95ff9cd37b6205f6e2f9":{"legacy_record_id":"coorstek-sc-rb-sc-2-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"3.10","unit":"g/cm³"}},"obs-9645c52480def852c12e":{"legacy_record_id":"cu-c28000-reference","source_value":{"offset_to_si":0,"scale_to_si":1.730734666295328,"significant_figures":2,"text":"71","unit":"Btu/(ft·hr·°F)"}},"obs-965a7f7b127c9a1aad72":{"legacy_record_id":"tecapeek-mt-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.31","unit":"g/cm³"}},"obs-9675e7ca62ff43eef11e":{"legacy_record_id":"tecamid-6-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.14","unit":"g/cm³"}},"obs-9676a87040daad54e737":{"legacy_record_id":"stainless-therma-304h-4948-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"390","unit":"MPa"}},"obs-967920e25c9a53e81e02":{"legacy_record_id":"al-6042-t5","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"10","unit":"%"}},"obs-977761b267059eab1dd4":{"legacy_record_id":"coorstek-nt-154-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"724","unit":"J/(kg·K)"}},"obs-979b1264946f05f2eb25":{"legacy_record_id":"stainless-forta-sdx-100-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"550","unit":"MPa"}},"obs-97bda4c0370410bf69bf":{"legacy_record_id":"steel-atlas-12l14fm-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"480","unit":"MPa"}},"obs-97f5687b38021842f1b6":{"legacy_record_id":"coorstek-ad-995-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"3.90","unit":"g/cm³"}},"obs-9823e4a767f62f399ea1":{"legacy_record_id":"stainless-forta-dx-2205-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.8","unit":"kg/dm³"}},"obs-983d8f8da4e8df514686":{"legacy_record_id":"tecaform-ah-gf25-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"4,200","unit":"MPa"}},"obs-987ef8249631e25c34d8":{"legacy_record_id":"tecapeek-els-nano-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.36","unit":"g/cm³"}},"obs-989a2f5e02d9487e5121":{"legacy_record_id":"steel-uddeholm-carmo-hardened-and-tempered-240-270-hb","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"204000","unit":"MPa"}},"obs-98bfc7f9589f6eeaa0b5":{"legacy_record_id":"tecapeek-st-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"4,600","unit":"MPa"}},"obs-98c38327cbc2ce5e2d60":{"legacy_record_id":"tecapeek-ht-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"192","unit":"MPa"}},"obs-98cc4737dd03822f71b5":{"legacy_record_id":"tecaform-ah-san-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"67","unit":"MPa"}},"obs-98fd9a33e3e96c3a05f0":{"legacy_record_id":"tecapeek-st-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"134","unit":"MPa"}},"obs-9928b1bbc74bdf9c3c32":{"legacy_record_id":"cu-c17200-reference","source_value":{"offset_to_si":0,"scale_to_si":4186.8,"significant_figures":2,"text":".10","unit":"Btu/(lb·°F)"}},"obs-99293a3bdd90b60beddd":{"legacy_record_id":"tecamid-6-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"3,300","unit":"MPa"}},"obs-992e073c344b6163ad0e":{"legacy_record_id":"tecaflon-pvdf-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"17","unit":"%"}},"obs-999309d730fc38c5fb26":{"legacy_record_id":"stainless-core-201-4372-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"45","unit":"%"}},"obs-99cbdd7d271565ca2b7e":{"legacy_record_id":"stainless-core-4622-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"300","unit":"MPa"}},"obs-9a43609d8d6fa934ecf3":{"legacy_record_id":"tecast-l-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"66","unit":"MPa"}},"obs-9a5c97dead54523dd75b":{"legacy_record_id":"steel-atlas-1045-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"690","unit":"MPa"}},"obs-9a6a415a6e264730664d":{"legacy_record_id":"al-6082-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":2,"text":"0.098","unit":"lb/in³"}},"obs-9a8748196da0eaf808fe":{"legacy_record_id":"steel-atlas-8620h-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"780–1080","unit":"MPa"}},"obs-9afc5b210004185cffc9":{"legacy_record_id":"tecatron-gf40-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"6,500","unit":"MPa"}},"obs-9b3879383126b1307f6e":{"legacy_record_id":"stainless-therma-347h-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"21","unit":"W/(m·K)"}},"obs-9b3c0987a4a63a089078":{"legacy_record_id":"stainless-supra-316-4436-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"500","unit":"J/(kg·K)"}},"obs-9b43b0a5ab62da1c42d2":{"legacy_record_id":"tecapeek-id-blue-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"111","unit":"MPa"}},"obs-9b603e04b1c9cc550b8a":{"legacy_record_id":"stainless-core-304ln-4311-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"550–750","unit":"MPa"}},"obs-9b9d8d4853aba3ed7a3b":{"legacy_record_id":"tecarim-1500-yellow-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.32","unit":"W/(m·K)"}},"obs-9bbe63c52128cf15b5f9":{"legacy_record_id":"stainless-core-4622-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"22","unit":"%"}},"obs-9bf1f531a4863b93f9a2":{"legacy_record_id":"stainless-therma-321h-4878-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"152","unit":"MPa"}},"obs-9c0712e8260e90b651a0":{"legacy_record_id":"stainless-core-347-4550-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-9c11abbd5f21f0861b07":{"legacy_record_id":"stainless-core-304ln-4311-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"290","unit":"MPa"}},"obs-9c540013195311fd1f32":{"legacy_record_id":"stainless-core-301-4310-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"600–950","unit":"MPa"}},"obs-9c5582a3c2eeac37e786":{"legacy_record_id":"stainless-supra-444-4521-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"23","unit":"W/(m·K)"}},"obs-9c5df414faa023291749":{"legacy_record_id":"stainless-core-441-4509-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.7","unit":"kg/dm³"}},"obs-9c87e0867428a32fc0ae":{"legacy_record_id":"stainless-therma-4713-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.7","unit":"kg/dm³"}},"obs-9c883361bc5a85618904":{"legacy_record_id":"steel-uddeholm-stavax-esr-hardened-and-tempered-50-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":1,"text":"200000","unit":"N/mm²"}},"obs-9caef868bf7001593d93":{"legacy_record_id":"tecaform-ah-gf25-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.59","unit":"g/cm³"}},"obs-9cb7be706a75d31d9c87":{"legacy_record_id":"stainless-forta-ldx-2404-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"500","unit":"J/(kg·K)"}},"obs-9cdcd5d0c29d16390f25":{"legacy_record_id":"steel-uddeholm-carmo-hardened-and-tempered-240-270-hb","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":4,"text":"7780","unit":"kg/m³"}},"obs-9d053ee8b4f355d2d971":{"legacy_record_id":"stainless-ultra-654-smo-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"430","unit":"MPa"}},"obs-9d225e04144b159bc480":{"legacy_record_id":"tecapeek-tf10-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"149","unit":"MPa"}},"obs-9d39f6caa499d61f88bc":{"legacy_record_id":"tecaform-ah-els-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.41","unit":"g/cm³"}},"obs-9d6df63febdf74199ab5":{"legacy_record_id":"stainless-therma-4828-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"128","unit":"MPa"}},"obs-9d7a6626a68abe0d3448":{"legacy_record_id":"al-6105-t5","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"240","unit":"MPa"}},"obs-9dab9bd29bf783c6d209":{"legacy_record_id":"stainless-therma-314-4841-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"196","unit":"GPa"}},"obs-9dc82457e31cec04e7ac":{"legacy_record_id":"stainless-core-201-4372-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"200","unit":"GPa"}},"obs-9dcba6ad4e9e46359a98":{"legacy_record_id":"tecasint-1611-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"82","unit":"MPa"}},"obs-9df2bb54c243a0107750":{"legacy_record_id":"coorstek-plasmapure-uc-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"870","unit":"J/(kg·K)"}},"obs-9e12ef82ffe0f8c972c6":{"legacy_record_id":"steel-atlas-6657-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1230–1480","unit":"MPa"}},"obs-9e3ae309e7a622740c98":{"legacy_record_id":"tecasint-5201-sd-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"4.0","unit":"%"}},"obs-9e48605e3991db402d91":{"legacy_record_id":"tecapeek-els-nano-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"106","unit":"MPa"}},"obs-9ee7412aa9dfe5c89b8d":{"legacy_record_id":"tecamid-66-x-gf50-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"115","unit":"MPa"}},"obs-9ef95b988fad96083bd8":{"legacy_record_id":"stainless-therma-314-4841-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"405","unit":"MPa"}},"obs-9efbe4e2a797ddc021a3":{"legacy_record_id":"tecamid-66-gf30-black-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"14","unit":"%"}},"obs-9f249ee374ef850bdb80":{"legacy_record_id":"coorstek-ad-995-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"880","unit":"J/(kg·K)"}},"obs-9f2a43591363e85f163d":{"legacy_record_id":"coorstek-puresic-cvd-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.21","unit":"1"}},"obs-9f507e9f1b6df90d61e3":{"legacy_record_id":"tecaform-ah-mt-coloured-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"30","unit":"%"}},"obs-9f631df4cc53feec7380":{"legacy_record_id":"steel-uddeholm-arne-hardened-and-tempered-62-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"34","unit":"W/(m·°C)"}},"obs-9fb45960dc4728100153":{"legacy_record_id":"tecapeek-gf30-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"164","unit":"MPa"}},"obs-a03ae6e7dbe5ee90375d":{"legacy_record_id":"ti-6al-4v-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"107–122","unit":"GPa"}},"obs-a0605cd736caff82bbfe":{"legacy_record_id":"coorstek-rbb4c-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.18","unit":"1"}},"obs-a070a5bebb3701dc74ba":{"legacy_record_id":"tecapeek-classix-white-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"117","unit":"MPa"}},"obs-a09093a455a1fda8e07a":{"legacy_record_id":"steel-atlas-1214fm-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"430","unit":"MPa"}},"obs-a14660e0a292e75f81cd":{"legacy_record_id":"cu-c17300-reference","source_value":{"offset_to_si":0,"scale_to_si":4186.8,"significant_figures":2,"text":".10","unit":"Btu/(lb·°F)"}},"obs-a17b7d32e22111549b6a":{"legacy_record_id":"tecasint-1011-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.22","unit":"W/(m·K)"}},"obs-a19e28f66ea63a5f3210":{"legacy_record_id":"steel-atlas-m1020-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"12","unit":"%"}},"obs-a1c2bc9a57009c6eba44":{"legacy_record_id":"stainless-supra-316l-4435-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"500","unit":"J/(kg·K)"}},"obs-a1d56c6384f78d978c0a":{"legacy_record_id":"steel-atlas-4340-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"900–1000","unit":"MPa"}},"obs-a22349fcc101661ef815":{"legacy_record_id":"stainless-forta-dx-2304-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.8","unit":"kg/dm³"}},"obs-a22bc273f0c0721605eb":{"legacy_record_id":"cu-c18000-reference","source_value":{"offset_to_si":0,"scale_to_si":1.730734666295328,"significant_figures":3,"text":"125","unit":"Btu/(ft·hr·°F)"}},"obs-a2448aa4f550ca7bcc5b":{"legacy_record_id":"steel-uddeholm-rigor-hardened-and-tempered-62-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"460","unit":"J/(kg·°C)"}},"obs-a283a10543357e61981f":{"legacy_record_id":"tecapeek-cmf-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"4","unit":"%"}},"obs-a2de8d0e68edcd5e0f35":{"legacy_record_id":"stainless-therma-321h-4878-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"123","unit":"MPa"}},"obs-a2e968fa7f48cf6ab461":{"legacy_record_id":"stainless-supra-316-4436-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"550–700","unit":"MPa"}},"obs-a31bd8d7ee44a256260b":{"legacy_record_id":"stainless-ultra-904l-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"195","unit":"GPa"}},"obs-a38da59222c7ba2958aa":{"legacy_record_id":"stainless-therma-321h-4878-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"345","unit":"MPa"}},"obs-a3b67ac995cdea291744":{"legacy_record_id":"tecasint-1021-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"2.8","unit":"%"}},"obs-a3edbfb10ab39147cc38":{"legacy_record_id":"steel-uddeholm-orvar-supreme-hardened-and-tempered-45-1-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"180000","unit":"MPa"}},"obs-a3eeb42045361d7f80b1":{"legacy_record_id":"coorstek-ad-94-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"3.70","unit":"g/cm³"}},"obs-a3f0499156803f369bc0":{"legacy_record_id":"tecamid-46-redbrown-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"3,300","unit":"MPa"}},"obs-a3f2439ddf152a35ce6f":{"legacy_record_id":"steel-atlas-1214fm-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"400","unit":"MPa"}},"obs-a4353907e33dad7ff75c":{"legacy_record_id":"tecamid-12-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"54","unit":"MPa"}},"obs-a45091945b441567ac0e":{"legacy_record_id":"tecasint-1041-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"126","unit":"MPa"}},"obs-a474c2f2e35270690454":{"legacy_record_id":"stainless-therma-321h-4878-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"196","unit":"GPa"}},"obs-a4a4aeaa50c087120160":{"legacy_record_id":"stainless-therma-347h-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"147","unit":"MPa"}},"obs-a4b3914aab1e13fec266":{"legacy_record_id":"stainless-therma-4724-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"500","unit":"J/(kg·K)"}},"obs-a4d33001487132f2998b":{"legacy_record_id":"coorstek-ad-85-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"920","unit":"J/(kg·K)"}},"obs-a5029ced468cd704ba0f":{"legacy_record_id":"tecadur-pet-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.39","unit":"g/cm³"}},"obs-a5258b1bf0cf79ee4cdb":{"legacy_record_id":"tecatron-gf40-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"83","unit":"MPa"}},"obs-a56b93e03ea88c491041":{"legacy_record_id":"al-6005-t1","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"170","unit":"MPa"}},"obs-a57ee84d383c5ccb4bfe":{"legacy_record_id":"tecatron-pvx-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.58","unit":"W/(m·K)"}},"obs-a5b118e7b1b0faabe629":{"legacy_record_id":"tecapei-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.28","unit":"g/cm³"}},"obs-a5e7432f0953d2466e76":{"legacy_record_id":"cu-c36500-reference","source_value":{"offset_to_si":0,"scale_to_si":1.730734666295328,"significant_figures":2,"text":"71","unit":"Btu/(ft·hr·°F)"}},"obs-a5fb3595cac60510fbc9":{"legacy_record_id":"tecaflon-pvdf-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"62","unit":"MPa"}},"obs-a64ac73e9de940de4c92":{"legacy_record_id":"stainless-core-305-4303-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"220","unit":"MPa"}},"obs-a66ed47cd85f83419ea2":{"legacy_record_id":"tecast-l-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.13","unit":"g/cm³"}},"obs-a6c262d4fa38102f58e8":{"legacy_record_id":"tecarim-1500-yellow-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"53","unit":"MPa"}},"obs-a6dab510d759b49a7a3f":{"legacy_record_id":"tecatec-pekk-cw60-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":5,"text":"54,300","unit":"MPa"}},"obs-a71978bfe4be67f0dad4":{"legacy_record_id":"coorstek-ad-90-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.22","unit":"1"}},"obs-a78e35ba731c734724dc":{"legacy_record_id":"tecaform-ah-sd-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"39","unit":"MPa"}},"obs-a7e6f59134a3bab4ca74":{"legacy_record_id":"stainless-therma-314-4841-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"91","unit":"MPa"}},"obs-a7f5d680103d08a8c08e":{"legacy_record_id":"cu-c46400-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":".304","unit":"lb/in³"}},"obs-a81a3f883d2a037f103c":{"legacy_record_id":"steel-uddeholm-arne-hardened-and-tempered-62-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":4,"text":"7700","unit":"kg/m³"}},"obs-a83c3dbe5e2d04ead7f4":{"legacy_record_id":"coorstek-ad-94-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"352","unit":"MPa"}},"obs-a85009d4227051e34a84":{"legacy_record_id":"steel-uddeholm-arne-hardened-and-tempered-62-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":4,"text":"7750","unit":"kg/m³"}},"obs-a85dfe1dabbb8775e21d":{"legacy_record_id":"coorstek-plasmapure-ad-998-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"880","unit":"J/(kg·K)"}},"obs-a88029ade3d21394899a":{"legacy_record_id":"tecamid-6-gf25-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.33","unit":"g/cm³"}},"obs-a88fac0562dfc46dccf1":{"legacy_record_id":"stainless-therma-309s-4833-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"472","unit":"J/(kg·K)"}},"obs-a8c970b042021a8b51f5":{"legacy_record_id":"tecadur-pbt-gf30-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"3,400","unit":"MPa"}},"obs-a8f00f0d3850520045e7":{"legacy_record_id":"al-6082-t6","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"260","unit":"MPa"}},"obs-a8fa4963dbf651a8b257":{"legacy_record_id":"coorstek-wc-aci-ni6-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"2330","unit":"MPa"}},"obs-a8fceaf4794889451e41":{"legacy_record_id":"al-6101-t63","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"150","unit":"MPa"}},"obs-a919ddc3354647747a3d":{"legacy_record_id":"stainless-supra-316l-4404-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"530–680","unit":"MPa"}},"obs-a92ca45e560f9359ce1d":{"legacy_record_id":"stainless-therma-309s-4833-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"91","unit":"MPa"}},"obs-a94df44a202bf597d19e":{"legacy_record_id":"stainless-therma-321h-4878-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"390","unit":"MPa"}},"obs-a9c9f173fa131298263d":{"legacy_record_id":"tecamid-66-hi-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"72","unit":"MPa"}},"obs-aa266d42c598cf899916":{"legacy_record_id":"al-6082-t6","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"172","unit":"W/(m·K)"}},"obs-aa2e800a4b4dede582d8":{"legacy_record_id":"stainless-core-301ln-4318-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"650–850","unit":"MPa"}},"obs-aa7fbf1a2ef33e52baa0":{"legacy_record_id":"stainless-core-301-4310-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"200","unit":"GPa"}},"obs-aab7e7e634064fd8eb59":{"legacy_record_id":"tecamid-66-x-gf50-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"115","unit":"MPa"}},"obs-aac2aae874a6772a8c3d":{"legacy_record_id":"cu-c75200-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":".316","unit":"lb/in³"}},"obs-aaca01f9107d6b856abd":{"legacy_record_id":"stainless-therma-304h-4948-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"375","unit":"MPa"}},"obs-aafba552a1ebae4d52f7":{"legacy_record_id":"tecamid-66-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.15","unit":"g/cm³"}},"obs-ab26c8bfffaa91c8da36":{"legacy_record_id":"coorstek-zta-10-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"450","unit":"MPa"}},"obs-ab2c70e3b5d91cc9fd4f":{"legacy_record_id":"stainless-therma-304h-4948-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"375","unit":"MPa"}},"obs-ab8c3e58f2d7507defcc":{"legacy_record_id":"tecamid-66-la-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"14","unit":"%"}},"obs-ac5416bf46cdb6a9af9c":{"legacy_record_id":"tecapro-mt-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"54","unit":"MPa"}},"obs-acb56072c55208c59b89":{"legacy_record_id":"tecaform-ah-els-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"56","unit":"MPa"}},"obs-acba2157823c173e3b17":{"legacy_record_id":"stainless-core-4622-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"220","unit":"GPa"}},"obs-ace289b89bb770e3a8d2":{"legacy_record_id":"steel-uddeholm-dievar-hardened-and-tempered-44-46-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":4,"text":"7600","unit":"kg/m³"}},"obs-ace46acfafebdd7c4fc8":{"legacy_record_id":"coorstek-mullite-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"3.5","unit":"W/(m·K)"}},"obs-ad14a07761bbbb64cc9d":{"legacy_record_id":"tecanat-gf30-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"6","unit":"%"}},"obs-ad26df2567f44dfee560":{"legacy_record_id":"tecaran-abs-grey-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1,700","unit":"MPa"}},"obs-ad3ae2c6fc9fd7c029fc":{"legacy_record_id":"tecamid-6-gf25-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"96","unit":"MPa"}},"obs-adc134a35ab3390793b7":{"legacy_record_id":"al-6005a-t5","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"9","unit":"%"}},"obs-addae2135e115c80ed60":{"legacy_record_id":"stainless-therma-309s-4833-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"400","unit":"MPa"}},"obs-aeb910bd6d0a63d4d6bb":{"legacy_record_id":"steel-uddeholm-carmo-hardened-and-tempered-240-270-hb","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":4,"text":"7730","unit":"kg/m³"}},"obs-aee6b72c24683c71594a":{"legacy_record_id":"steel-uddeholm-sverker-21-hardened-and-tempered-62-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":4,"text":"7600","unit":"kg/m³"}},"obs-aefb20cb0ab36851f030":{"legacy_record_id":"cu-c35300-reference","source_value":{"offset_to_si":0,"scale_to_si":4186.8,"significant_figures":1,"text":".09","unit":"Btu/(lb·°F)"}},"obs-af044b3907f6ec12639f":{"legacy_record_id":"steel-atlas-6580-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1100–1200","unit":"MPa"}},"obs-af27a374509dbd3a2784":{"legacy_record_id":"steel-uddeholm-stavax-esr-hardened-and-tempered-50-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"20","unit":"W/(m·°C)"}},"obs-af350728e6f8242297fa":{"legacy_record_id":"coorstek-ad-85-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"16.0","unit":"W/(m·K)"}},"obs-af38916fd248c9002f0e":{"legacy_record_id":"coorstek-ad-995-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"370","unit":"GPa"}},"obs-af5dceaf983e41aec192":{"legacy_record_id":"tecapeek-cmf-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"5,500","unit":"MPa"}},"obs-af5fad3384a7269b0c93":{"legacy_record_id":"stainless-core-304l-4307-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"500","unit":"J/(kg·K)"}},"obs-afbfa0ede9124bcf7c41":{"legacy_record_id":"tecanyl-731-grey-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.21","unit":"W/(m·K)"}},"obs-afd38e684beef9325460":{"legacy_record_id":"al-6005a-t5","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"193","unit":"W/(m·K)"}},"obs-aff4a1d9665d54124200":{"legacy_record_id":"coorstek-zta-10-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"27.0","unit":"W/(m·K)"}},"obs-aff51a0c9614767cd388":{"legacy_record_id":"tecast-tm-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"82","unit":"MPa"}},"obs-b00d5054ccba2effd82d":{"legacy_record_id":"cu-c23000-reference","source_value":{"offset_to_si":0,"scale_to_si":1.730734666295328,"significant_figures":2,"text":"92","unit":"Btu/(ft·hr·°F)"}},"obs-b032c343557a17d512da":{"legacy_record_id":"cu-c22000-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":".318","unit":"lb/in³"}},"obs-b038d6aea5d28acb960e":{"legacy_record_id":"coorstek-dura-z-ttz-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"5.72","unit":"g/cm³"}},"obs-b04465d7a0161932b355":{"legacy_record_id":"coorstek-plasmapure-uc-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"386","unit":"GPa"}},"obs-b05afa5e0f3fa5d11d39":{"legacy_record_id":"tecapeek-ht-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"120","unit":"MPa"}},"obs-b09d466a1aa19479ea1c":{"legacy_record_id":"steel-atlas-m1020-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"460","unit":"MPa"}},"obs-b0dc7b3ebeb9d51690ec":{"legacy_record_id":"steel-atlas-6582-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"12","unit":"%"}},"obs-b0e376535bb4e29bdcf5":{"legacy_record_id":"tecamid-66-la-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"76","unit":"MPa"}},"obs-b0e43b0e0e14e36fd598":{"legacy_record_id":"tecasint-5201-sd-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"135","unit":"MPa"}},"obs-b0eccd62601941814a39":{"legacy_record_id":"stainless-core-4622-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"430–630","unit":"MPa"}},"obs-b0fb7f618b72453fd912":{"legacy_record_id":"coorstek-wc-aci-ni6-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"614","unit":"GPa"}},"obs-b108c8ac5095448cfc7f":{"legacy_record_id":"stainless-therma-314-4841-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"450","unit":"MPa"}},"obs-b1290da5ec2297a14641":{"legacy_record_id":"tecapro-mt-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"67","unit":"%"}},"obs-b1556e210821d6580471":{"legacy_record_id":"stainless-core-301ln-4318-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-b1696b2f9727514ddcba":{"legacy_record_id":"coorstek-ultrasic-sc-30-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"480","unit":"MPa"}},"obs-b1775c2d0e57cf8e0aa5":{"legacy_record_id":"tecason-p-mt-coloured-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"107","unit":"MPa"}},"obs-b209c3969e2d5a962081":{"legacy_record_id":"stainless-forta-dx-2304-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"450","unit":"MPa"}},"obs-b20b7d093e9abf5574f3":{"legacy_record_id":"steel-uddeholm-orvar-supreme-hardened-and-tempered-45-1-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":4,"text":"7800","unit":"kg/m³"}},"obs-b21e016db47b252bd250":{"legacy_record_id":"stainless-therma-309s-4833-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"430","unit":"MPa"}},"obs-b21e6b278f1ee77d5c56":{"legacy_record_id":"coorstek-esd-alumina-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"370","unit":"GPa"}},"obs-b26340059434da7b8a00":{"legacy_record_id":"ti-6246-da","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1034","unit":"MPa"}},"obs-b2823bc35a1e5d1a86f7":{"legacy_record_id":"steel-atlas-4140-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"13","unit":"%"}},"obs-b299d4b083bd70be282e":{"legacy_record_id":"tecapeek-st-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.32","unit":"g/cm³"}},"obs-b2e53c08eb71c6b63643":{"legacy_record_id":"cu-c26000-reference","source_value":{"offset_to_si":0,"scale_to_si":1.730734666295328,"significant_figures":2,"text":"70","unit":"Btu/(ft·hr·°F)"}},"obs-b30bc6601702bf219143":{"legacy_record_id":"stainless-therma-304h-4948-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"103","unit":"MPa"}},"obs-b30bea02dacfcae54be4":{"legacy_record_id":"al-1100-h112","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"20","unit":"MPa"}},"obs-b34fc578de2baa33d441":{"legacy_record_id":"tecaform-ah-la-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"48","unit":"MPa"}},"obs-b35538fb7617e3dc3436":{"legacy_record_id":"stainless-core-304l-4307-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.9","unit":"kg/dm³"}},"obs-b35bd1d25b1ee712a9f5":{"legacy_record_id":"tecamid-12-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"68","unit":"MPa"}},"obs-b362ad898349c2408615":{"legacy_record_id":"steel-atlas-4340-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"720","unit":"MPa"}},"obs-b3f0d529a50eac3c0951":{"legacy_record_id":"tecapeek-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"116","unit":"MPa"}},"obs-b4012d929e93ae615e15":{"legacy_record_id":"al-6105-t1","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"16","unit":"%"}},"obs-b476d43524d2653fe8a2":{"legacy_record_id":"tecaform-ad-af-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"85","unit":"MPa"}},"obs-b496b2e6d1882b41158c":{"legacy_record_id":"ti-6al-2sn-4zr-6mo-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":2,"text":"70–114","unit":"GPa"}},"obs-b588786d8d2471277a70":{"legacy_record_id":"steel-uddeholm-caldie-hardened-and-tempered-60-61-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"180000","unit":"MPa"}},"obs-b5a29e742814d000d85d":{"legacy_record_id":"stainless-therma-304h-4948-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"178","unit":"MPa"}},"obs-b5bfc2fadc6e10358606":{"legacy_record_id":"coorstek-ad-90-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"338","unit":"MPa"}},"obs-b5ccb2be1f9fb62505eb":{"legacy_record_id":"stainless-therma-321h-4878-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"410","unit":"MPa"}},"obs-b60fae5ef5fe404d2341":{"legacy_record_id":"tecapeek-gf30-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"105","unit":"MPa"}},"obs-b62d5f5f96f3aab57b14":{"legacy_record_id":"steel-uddeholm-rigor-hardened-and-tempered-62-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"26.0","unit":"W/(m·°C)"}},"obs-b66ba88d8f2fbc91cf04":{"legacy_record_id":"stainless-supra-316l-4435-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"550–700","unit":"MPa"}},"obs-b699b1883177f64176cf":{"legacy_record_id":"coorstek-ytzp-sintered-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"2.2","unit":"W/(m·K)"}},"obs-b6b62d45b65c9f45ed82":{"legacy_record_id":"stainless-supra-444-4521-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"220","unit":"GPa"}},"obs-b6fdd7008b3a7f3d9dba":{"legacy_record_id":"coorstek-esd-alumina-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"25","unit":"W/(m·K)"}},"obs-b745b98321e67afc0379":{"legacy_record_id":"tecapeek-els-nano-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.46","unit":"W/(m·K)"}},"obs-b75812179cafd5b5b87b":{"legacy_record_id":"stainless-ultra-254-smo-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"320","unit":"MPa"}},"obs-b772c34171d8060d0bf0":{"legacy_record_id":"coorstek-rbb4c-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"379","unit":"GPa"}},"obs-b795cc82ec5852eccfa3":{"legacy_record_id":"tecast-tm-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"102","unit":"MPa"}},"obs-b7977666e01236df5468":{"legacy_record_id":"coorstek-plasmapure-ad-998-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"31.0","unit":"W/(m·K)"}},"obs-b7a82773d0dc7a7badd3":{"legacy_record_id":"stainless-therma-4828-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"150","unit":"GPa"}},"obs-b8235e98ac06bc5d072d":{"legacy_record_id":"cu-c35300-reference","source_value":{"offset_to_si":0,"scale_to_si":1.730734666295328,"significant_figures":2,"text":"67","unit":"Btu/(ft·hr·°F)"}},"obs-b8509b252fc1adac7c66":{"legacy_record_id":"steel-uddeholm-stavax-esr-hardened-and-tempered-50-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":4,"text":"7800","unit":"kg/m³"}},"obs-b855cf5021fcb78dde02":{"legacy_record_id":"stainless-therma-347h-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"155","unit":"GPa"}},"obs-b8790e2f8069d597afb8":{"legacy_record_id":"tecaform-ad-af-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"53","unit":"MPa"}},"obs-b88987eee622002ab625":{"legacy_record_id":"stainless-therma-310s-4845-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"420","unit":"MPa"}},"obs-b895ffca6947d2fc2d21":{"legacy_record_id":"stainless-therma-4828-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"21","unit":"W/(m·K)"}},"obs-b8fae2b0d180f91d6a4a":{"legacy_record_id":"tecason-s-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"2,700","unit":"MPa"}},"obs-b9177e3a1e4cc1bda5ad":{"legacy_record_id":"al-6005a-t1","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"176","unit":"W/(m·K)"}},"obs-b94b53e904e54f1a3559":{"legacy_record_id":"tecasint-1011-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"4,000","unit":"MPa"}},"obs-b9799191b91115b51c86":{"legacy_record_id":"steel-uddeholm-carmo-hardened-and-tempered-270-hb","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"870","unit":"MPa"}},"obs-b97a512e27d76069ca60":{"legacy_record_id":"cu-c14500-reference","source_value":{"offset_to_si":0,"scale_to_si":4186.8,"significant_figures":2,"text":".092","unit":"Btu/(lb·°F)"}},"obs-b97cd027da946dbdc203":{"legacy_record_id":"stainless-core-321-4541-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-b98657876e622ff3db5e":{"legacy_record_id":"tecasint-2391-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"4,400","unit":"MPa"}},"obs-b98c3c9575d2cde4794e":{"legacy_record_id":"tecamid-66-gf30-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"5,500","unit":"MPa"}},"obs-b9e01a3db5269ed636c1":{"legacy_record_id":"steel-atlas-1214fm-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"290","unit":"MPa"}},"obs-b9f40cc142e5aca8ae76":{"legacy_record_id":"cu-c18200-reference","source_value":{"offset_to_si":0,"scale_to_si":4186.8,"significant_figures":2,"text":".092","unit":"Btu/(lb·°F)"}},"obs-b9fe162d5326a2d68466":{"legacy_record_id":"steel-uddeholm-orvar-supreme-hardened-and-tempered-45-1-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"29","unit":"W/(m·°C)"}},"obs-ba0a0a22021ab6b28af9":{"legacy_record_id":"tecamid-66-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"85","unit":"MPa"}},"obs-ba2965b2f5a3799e9dee":{"legacy_record_id":"steel-atlas-1045-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"9","unit":"%"}},"obs-bb0d1ea3881a307a5fe5":{"legacy_record_id":"tecamid-6-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":3,"text":"130","unit":"%"}},"obs-bb36288526eef8918630":{"legacy_record_id":"tecamid-12-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1,800","unit":"MPa"}},"obs-bb4976d1ea008e924e6b":{"legacy_record_id":"stainless-core-347-4550-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"500","unit":"J/(kg·K)"}},"obs-bb5cda1cbac93c88d819":{"legacy_record_id":"stainless-therma-314-4841-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"472","unit":"J/(kg·K)"}},"obs-bc223b87c1160e0f4ab3":{"legacy_record_id":"tecatron-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"4,100","unit":"MPa"}},"obs-bc417d351ec394c0d517":{"legacy_record_id":"tecamid-66-mh-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"83","unit":"MPa"}},"obs-bc5403f20190d0de0efe":{"legacy_record_id":"tecason-s-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.24","unit":"g/cm³"}},"obs-bc69a15139d778870c2e":{"legacy_record_id":"tecasint-1041-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"2.8","unit":"%"}},"obs-bc95e3679149c6d22983":{"legacy_record_id":"coorstek-mullite-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"150","unit":"GPa"}},"obs-bca87a1689ffd3337666":{"legacy_record_id":"al-6005-t5","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"10","unit":"%"}},"obs-bce320ad3d6f5795424f":{"legacy_record_id":"tecafine-pmp-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"26","unit":"MPa"}},"obs-bd21b4032a52100c0a22":{"legacy_record_id":"steel-uddeholm-caldie-hardened-and-tempered-60-61-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"28","unit":"W/(m·°C)"}},"obs-bd4739a2829cd06c1be4":{"legacy_record_id":"stainless-therma-4713-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"23","unit":"W/(m·K)"}},"obs-bd5a9fed0d157d12edf2":{"legacy_record_id":"al-1100-h112","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":3,"text":"25.0","unit":"%"}},"obs-bd63fb08ce665e6f38e0":{"legacy_record_id":"tecatron-gf40-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"3","unit":"%"}},"obs-bd79a80dbecaffdcf7f4":{"legacy_record_id":"cu-c18700-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":".323","unit":"lb/in³"}},"obs-bdbfb6115ce844a46f74":{"legacy_record_id":"cu-c35300-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":".306","unit":"lb/in³"}},"obs-be077cdc2b4ca3a7fed3":{"legacy_record_id":"stainless-supra-316ti-4571-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"240","unit":"MPa"}},"obs-be081ef898bb0190428e":{"legacy_record_id":"stainless-ultra-254-smo-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"650–850","unit":"MPa"}},"obs-be1a3ae6d94429701888":{"legacy_record_id":"tecanyl-mt-coloured-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"2,400","unit":"MPa"}},"obs-be572805453708044fe4":{"legacy_record_id":"stainless-therma-4713-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"220","unit":"GPa"}},"obs-be60646c0de3ba72c818":{"legacy_record_id":"tecaform-ah-natural-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.41","unit":"g/cm³"}},"obs-be70f240fa0954105890":{"legacy_record_id":"tecapeek-cmf-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"102","unit":"MPa"}},"obs-be97bbb56573616f9931":{"legacy_record_id":"ti-6al-2sn-4zr-6mo-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"4.64","unit":"g/cm³"}},"obs-beb0699a8aca5f72a374":{"legacy_record_id":"tecatron-gf40-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.35","unit":"W/(m·K)"}},"obs-bec2803aa8478c75c47f":{"legacy_record_id":"tecasint-4021-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"93","unit":"MPa"}},"obs-bf1e6d304ee7c7cea8af":{"legacy_record_id":"tecast-tm-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"80","unit":"MPa"}},"obs-c00d628e8792fce8db2f":{"legacy_record_id":"tecamid-6-gf30-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"5,700","unit":"MPa"}},"obs-c043e7bd12e1afb9d6b8":{"legacy_record_id":"steel-atlas-12l14fm-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"400","unit":"MPa"}},"obs-c0629e73b64052fcdc91":{"legacy_record_id":"tecamid-6-gf30-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"140","unit":"MPa"}},"obs-c08d3f589a4134c2f45d":{"legacy_record_id":"cu-c36000-reference","source_value":{"offset_to_si":0,"scale_to_si":4186.8,"significant_figures":1,"text":".09","unit":"Btu/(lb·°F)"}},"obs-c0e6b05287b05e676dfb":{"legacy_record_id":"stainless-therma-304h-4948-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"440","unit":"MPa"}},"obs-c1299487f7e783b758ed":{"legacy_record_id":"al-1100-o","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"222","unit":"W/(m·K)"}},"obs-c1489d4bb4b0b6624521":{"legacy_record_id":"steel-uddeholm-dievar-hardened-and-tempered-44-46-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":4,"text":"7700","unit":"kg/m³"}},"obs-c152e3d067ebef0ec9e4":{"legacy_record_id":"tecasint-2021-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"101","unit":"MPa"}},"obs-c17aade8600b54417c6a":{"legacy_record_id":"stainless-ultra-654-smo-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"190","unit":"GPa"}},"obs-c180ae68e5f49b21e137":{"legacy_record_id":"tecasint-1611-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.51","unit":"g/cm³"}},"obs-c1b6efb2daba23494bd8":{"legacy_record_id":"stainless-therma-304h-4948-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"21","unit":"W/(m·K)"}},"obs-c1c313d1bd68e41a2b16":{"legacy_record_id":"steel-uddeholm-caldie-hardened-and-tempered-60-61-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":4,"text":"7820","unit":"kg/m³"}},"obs-c1fba99ebccc5854364a":{"legacy_record_id":"coorstek-nt-154-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"310","unit":"GPa"}},"obs-c208e603d8450846eec1":{"legacy_record_id":"steel-atlas-6580-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"10","unit":"%"}},"obs-c22273f7a88cd8e088f9":{"legacy_record_id":"tecast-l-black-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"50","unit":"%"}},"obs-c268489777457a0e7720":{"legacy_record_id":"tecasint-4021-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"131","unit":"MPa"}},"obs-c28e246d5dbab6a147e5":{"legacy_record_id":"coorstek-steatite-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"110","unit":"GPa"}},"obs-c293719cc3fdc4f102fd":{"legacy_record_id":"steel-atlas-6580-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"700","unit":"MPa"}},"obs-c296f09eed9de90ec5d3":{"legacy_record_id":"tecasint-1021-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.53","unit":"W/(m·K)"}},"obs-c2d23388f73da4067abd":{"legacy_record_id":"stainless-therma-4828-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-c30f56729d81b13f6d9b":{"legacy_record_id":"cu-c36500-reference","source_value":{"offset_to_si":0,"scale_to_si":4186.8,"significant_figures":1,"text":".09","unit":"Btu/(lb·°F)"}},"obs-c3783a1b26aaac83bc29":{"legacy_record_id":"steel-atlas-6580-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1200–1300","unit":"MPa"}},"obs-c37ed6aa5a127b2230e6":{"legacy_record_id":"cu-c11000-reference","source_value":{"offset_to_si":0,"scale_to_si":1.730734666295328,"significant_figures":3,"text":"226","unit":"Btu/(ft·hr·°F)"}},"obs-c3ac41c57738893c5fe9":{"legacy_record_id":"tecason-s-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"89","unit":"MPa"}},"obs-c3b5abd7282b3d5e51b6":{"legacy_record_id":"al-6063-t4","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"14","unit":"%"}},"obs-c41657a4c822ed9f29fc":{"legacy_record_id":"tecanyl-731-grey-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"2,400","unit":"MPa"}},"obs-c420f814e4f53d17cc45":{"legacy_record_id":"tecatec-pekk-cw60-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"585","unit":"MPa"}},"obs-c4220ce5710f66ef406e":{"legacy_record_id":"tecapeek-mt-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"116","unit":"MPa"}},"obs-c43bb48561ba638dfbb9":{"legacy_record_id":"steel-atlas-6580-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1100","unit":"MPa"}},"obs-c49f499dc2845a78e300":{"legacy_record_id":"stainless-ultra-317l-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"500","unit":"J/(kg·K)"}},"obs-c50659a03eeceab975bf":{"legacy_record_id":"tecasint-2011-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"3,700","unit":"MPa"}},"obs-c55bb33dd3c82fd6e306":{"legacy_record_id":"stainless-core-441-4509-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"220","unit":"GPa"}},"obs-c5613b403bcfa3552957":{"legacy_record_id":"steel-uddeholm-dievar-hardened-and-tempered-44-46-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":4,"text":"7800","unit":"kg/m³"}},"obs-c59593178c7f5ebf455c":{"legacy_record_id":"stainless-therma-4724-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"21","unit":"W/(m·K)"}},"obs-c5e8ff6e94f11bfe9353":{"legacy_record_id":"tecanat-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"97","unit":"MPa"}},"obs-c6035ae524f6977ce806":{"legacy_record_id":"steel-atlas-1045-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"8","unit":"%"}},"obs-c628de317efe263c38e0":{"legacy_record_id":"tecasint-4121-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"113","unit":"MPa"}},"obs-c62d04928d06bfde93ba":{"legacy_record_id":"al-6105-t5","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"193","unit":"W/(m·K)"}},"obs-c63e37a365e0fdb94c0c":{"legacy_record_id":"tecator-5031-pvx-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"135","unit":"MPa"}},"obs-c651992521b8009a9e20":{"legacy_record_id":"coorstek-porcelain-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"104","unit":"GPa"}},"obs-c6628ca75bfbbc55aa5e":{"legacy_record_id":"stainless-therma-309s-4833-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"470","unit":"MPa"}},"obs-c66ec2bbb3fff9b42fc8":{"legacy_record_id":"al-1350-h111","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"60","unit":"MPa"}},"obs-c69265d61e9f66afc673":{"legacy_record_id":"al-6105-t1","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"170","unit":"MPa"}},"obs-c6de3ecdbd0844e6d451":{"legacy_record_id":"steel-atlas-6582-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"600","unit":"MPa"}},"obs-c716f25a3332cd750543":{"legacy_record_id":"tecasint-1061-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"120","unit":"MPa"}},"obs-c7392949dc240286c92b":{"legacy_record_id":"steel-atlas-m1030-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"540","unit":"MPa"}},"obs-c74231efdfe04397e105":{"legacy_record_id":"stainless-therma-347h-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"500","unit":"J/(kg·K)"}},"obs-c787e7be260cd8a32120":{"legacy_record_id":"stainless-therma-304h-4948-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"484","unit":"MPa"}},"obs-c78f14567325e2c61df9":{"legacy_record_id":"steel-atlas-12l14fm-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"7","unit":"%"}},"obs-c7cf2a35936187944814":{"legacy_record_id":"tecapeek-gf30-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"3","unit":"%"}},"obs-c7eb525f8507c9c1e7f7":{"legacy_record_id":"steel-atlas-m1020-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"430","unit":"MPa"}},"obs-c7fd2732284871147954":{"legacy_record_id":"al-1060-o","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":3,"text":"25.0","unit":"%"}},"obs-c80c469f34fecdf58ddd":{"legacy_record_id":"stainless-forta-dx-2304-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"20","unit":"%"}},"obs-c80cd5a792ed0d0bcc0f":{"legacy_record_id":"tecasint-1031-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"65","unit":"MPa"}},"obs-c8377c3f07a46e1c182f":{"legacy_record_id":"stainless-core-201-4372-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-c83d67dd792b903f13a5":{"legacy_record_id":"cu-c10200-reference","source_value":{"offset_to_si":0,"scale_to_si":1.730734666295328,"significant_figures":3,"text":"226","unit":"Btu/(ft·hr·°F)"}},"obs-c84af4655a117b5ee129":{"legacy_record_id":"stainless-core-304ln-4311-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.9","unit":"kg/dm³"}},"obs-c884779f923b0a2aeecd":{"legacy_record_id":"stainless-ultra-904l-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"240","unit":"MPa"}},"obs-c886c0e853409b0943be":{"legacy_record_id":"stainless-core-201ln-4372-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"350","unit":"MPa"}},"obs-c89e3b122d3ddceec287":{"legacy_record_id":"steel-atlas-m1030-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"10","unit":"%"}},"obs-c8ab791788cb06174b95":{"legacy_record_id":"stainless-supra-316l-4404-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"200","unit":"GPa"}},"obs-c8ae69dd7b5d45abeb49":{"legacy_record_id":"coorstek-nt-154-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"38","unit":"W/(m·K)"}},"obs-c909b0f51b12687bf1bb":{"legacy_record_id":"steel-uddeholm-stavax-esr-hardened-and-tempered-50-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"460","unit":"J/(kg·°C)"}},"obs-c9109616b34e36f9068b":{"legacy_record_id":"tecatron-pvx-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"2","unit":"%"}},"obs-c9124cb115bf82a158c2":{"legacy_record_id":"tecaform-ah-mt-coloured-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"70","unit":"MPa"}},"obs-c972dfd316f993af0baa":{"legacy_record_id":"steel-uddeholm-dievar-hardened-and-tempered-44-46-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"210000","unit":"MPa"}},"obs-c9af8ac20cc47763bfaa":{"legacy_record_id":"stainless-ultra-904l-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"8.0","unit":"kg/dm³"}},"obs-c9de5547ad8d4c0a7438":{"legacy_record_id":"tecaran-abs-grey-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.04","unit":"g/cm³"}},"obs-ca00fd5b69640e292c0a":{"legacy_record_id":"stainless-therma-310s-4845-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"86","unit":"MPa"}},"obs-ca2885aa9f20f7bd9a43":{"legacy_record_id":"stainless-therma-4828-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"430","unit":"MPa"}},"obs-ca73a006aca947024514":{"legacy_record_id":"tecasint-1101-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"4,000","unit":"MPa"}},"obs-ca782d18f13cac6d7dfa":{"legacy_record_id":"steel-uddeholm-arne-hardened-and-tempered-62-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"170000","unit":"N/mm²"}},"obs-ca7fe1733a6a29d76510":{"legacy_record_id":"tecaflon-pvdf-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"77","unit":"MPa"}},"obs-ca8354d70c299a769a9d":{"legacy_record_id":"tecaform-ah-la-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"2,100","unit":"MPa"}},"obs-ca83e224ab881e2a358e":{"legacy_record_id":"cu-c28000-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":".303","unit":"lb/in³"}},"obs-ca869ba8c3f2dfc46d6f":{"legacy_record_id":"tecason-p-mt-coloured-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"50","unit":"%"}},"obs-ca988193d3ea18c2cd0d":{"legacy_record_id":"tecaform-ah-la-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"9","unit":"%"}},"obs-cac55d38ca0ab533226e":{"legacy_record_id":"steel-uddeholm-stavax-esr-hardened-and-tempered-45-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1420","unit":"MPa"}},"obs-caecc083c8596a16f47c":{"legacy_record_id":"al-6063-t5","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"8","unit":"%"}},"obs-cb07983115d764d31b42":{"legacy_record_id":"tecaform-ah-natural-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"67","unit":"MPa"}},"obs-cb460ffc922528f0ff0c":{"legacy_record_id":"al-6042-t5","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"290","unit":"MPa"}},"obs-cb5764d703586d674be6":{"legacy_record_id":"tecatron-pvx-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"53","unit":"MPa"}},"obs-cb9fae3692cfa411397f":{"legacy_record_id":"stainless-supra-316l-4432-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"550–700","unit":"MPa"}},"obs-cba5b8fd53ed0e0cb7f9":{"legacy_record_id":"stainless-therma-253-ma-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"530","unit":"MPa"}},"obs-cbb6f41edb377c0bdabd":{"legacy_record_id":"al-6063-t4","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"60","unit":"MPa"}},"obs-cbd178f9e4ce6ed279f0":{"legacy_record_id":"tecasint-2031-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"87.5","unit":"MPa"}},"obs-cbdae8f917dde5d0c404":{"legacy_record_id":"ti-6246-da","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"10","unit":"%"}},"obs-cbeed920fb6239048de8":{"legacy_record_id":"stainless-therma-304h-4948-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"370","unit":"MPa"}},"obs-cbf2a7bb7324568e2661":{"legacy_record_id":"tecasint-2011-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.38","unit":"g/cm³"}},"obs-cc0e38516e144f309c38":{"legacy_record_id":"tecapei-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"164","unit":"MPa"}},"obs-cc128e75ccd5bbf0c51a":{"legacy_record_id":"tecasint-2011-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"118","unit":"MPa"}},"obs-cc25483ad3211a8a2637":{"legacy_record_id":"stainless-core-304l-4307-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-cc5819f7b17e16685e0f":{"legacy_record_id":"tecarim-1500-yellow-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.11","unit":"g/cm³"}},"obs-ccb558713cd7f53633c9":{"legacy_record_id":"cu-c21000-reference","source_value":{"offset_to_si":0,"scale_to_si":4186.8,"significant_figures":1,"text":".09","unit":"Btu/(lb·°F)"}},"obs-cd2537247c46834babe5":{"legacy_record_id":"stainless-core-301ln-4318-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"350","unit":"MPa"}},"obs-cd26fd4b873e9b8f9d0c":{"legacy_record_id":"tecasint-2031-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.59","unit":"g/cm³"}},"obs-cd320ea3aad47771e77d":{"legacy_record_id":"ti-6al-2sn-4zr-6mo-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"502","unit":"J/(kg·K)"}},"obs-cd710e3691d77d29e099":{"legacy_record_id":"al-6082-t6","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"260","unit":"MPa"}},"obs-cd957e7d8fdf825e8ca1":{"legacy_record_id":"tecamid-66-x-gf50-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"2","unit":"%"}},"obs-cd9648df82c4c6e4e43d":{"legacy_record_id":"tecapro-mt-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"34","unit":"MPa"}},"obs-cdba10d1595e12775abf":{"legacy_record_id":"tecasint-2391-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"95","unit":"MPa"}},"obs-cde392c04700c44df2b3":{"legacy_record_id":"coorstek-nt-154-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.27","unit":"1"}},"obs-ce0478dbb5aed2805dfd":{"legacy_record_id":"stainless-therma-309s-4833-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"410","unit":"MPa"}},"obs-ce22b7fad5d1bb84e895":{"legacy_record_id":"cu-c21000-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":".320","unit":"lb/in³"}},"obs-ce45c34ba6b45ffacc57":{"legacy_record_id":"al-6061-t6","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"167","unit":"W/(m·K)"}},"obs-ce657e0bdf3f2d0acfce":{"legacy_record_id":"coorstek-esd-alumina-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"3.85","unit":"g/cm³"}},"obs-ce7c0ef4c647827cffd6":{"legacy_record_id":"stainless-supra-316l-4435-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"240","unit":"MPa"}},"obs-ce8501443cc89e1160d4":{"legacy_record_id":"tecapro-mt-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"2,000","unit":"MPa"}},"obs-cea7aee8a6f3ba3ccf70":{"legacy_record_id":"stainless-supra-316l-4435-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-cedb062ee7273b747414":{"legacy_record_id":"stainless-core-301ln-4318-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"500","unit":"J/(kg·K)"}},"obs-cef53e925f055d134dbd":{"legacy_record_id":"tecapeek-cf30-mt-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"115","unit":"MPa"}},"obs-cf7ea4234d8d500b1b6d":{"legacy_record_id":"tecamid-6-gf25-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.40","unit":"W/(m·K)"}},"obs-cf980d56bed16508f80e":{"legacy_record_id":"tecatron-gf40-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"83","unit":"MPa"}},"obs-cfc2be1fb28fa818b7af":{"legacy_record_id":"tecaflon-pvdf-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.78","unit":"g/cm³"}},"obs-cfdcb13b43aad839425b":{"legacy_record_id":"stainless-supra-316l-4432-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"500","unit":"J/(kg·K)"}},"obs-d02dcaeae5833518a4ef":{"legacy_record_id":"stainless-core-301-4310-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"250","unit":"MPa"}},"obs-d08b81021997692ead49":{"legacy_record_id":"tecarim-1500-yellow-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"73","unit":"MPa"}},"obs-d0b96994815f7e9db9e8":{"legacy_record_id":"tecapeek-classix-white-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.30","unit":"W/(m·K)"}},"obs-d0b984b63edbed4ebff8":{"legacy_record_id":"stainless-forta-sdx-2507-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.8","unit":"kg/dm³"}},"obs-d0e1453036596d4c96f7":{"legacy_record_id":"tecanyl-731-grey-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"57","unit":"MPa"}},"obs-d0e1b91a3c656cacf640":{"legacy_record_id":"tecanyl-mt-coloured-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.04 – 1.10","unit":"g/cm³"}},"obs-d121d6414a193cace8cc":{"legacy_record_id":"tecapeek-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"15","unit":"%"}},"obs-d16338552a39192bd5be":{"legacy_record_id":"tecapeek-id-blue-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.49","unit":"g/cm³"}},"obs-d1b1a0c59b9b8a9f8ef9":{"legacy_record_id":"coorstek-ad-995-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"30.0","unit":"W/(m·K)"}},"obs-d1c671250bb111f498f4":{"legacy_record_id":"steel-uddeholm-stavax-esr-hardened-and-tempered-50-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1780","unit":"MPa"}},"obs-d210c04c34467182e60e":{"legacy_record_id":"tecaform-ah-sd-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"46","unit":"MPa"}},"obs-d25994b87b48497bb450":{"legacy_record_id":"al-6105-t1","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"176","unit":"W/(m·K)"}},"obs-d25ead22f83541fbfc4a":{"legacy_record_id":"tecaran-abs-grey-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"32","unit":"MPa"}},"obs-d27e13b59bd31d3a58f3":{"legacy_record_id":"tecamid-6-gf25-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"96","unit":"MPa"}},"obs-d2e538e1065c5f2c1207":{"legacy_record_id":"tecast-t-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"80","unit":"MPa"}},"obs-d2f88aed76003640a120":{"legacy_record_id":"tecasint-1101-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.22","unit":"W/(m·K)"}},"obs-d3325f2234484ff91526":{"legacy_record_id":"tecamid-66-cf20-black-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"13","unit":"%"}},"obs-d36ff9faba1e0f8d2d0f":{"legacy_record_id":"tecaform-ad-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"45","unit":"%"}},"obs-d3804c994bdbe6377800":{"legacy_record_id":"coorstek-ad-995-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.22","unit":"1"}},"obs-d39e015b605c27408975":{"legacy_record_id":"tecaform-ah-mt-coloured-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.41","unit":"g/cm³"}},"obs-d3af6664ca06fbe03410":{"legacy_record_id":"stainless-forta-ldx-2404-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"20","unit":"%"}},"obs-d3c9540d4a8ca758db36":{"legacy_record_id":"al-6063-t5","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"105","unit":"MPa"}},"obs-d4472d362ec913bacbcb":{"legacy_record_id":"stainless-core-301ln-4318-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.9","unit":"kg/dm³"}},"obs-d46d6dfd3c7abeaec7e7":{"legacy_record_id":"coorstek-fg-995-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"375","unit":"MPa"}},"obs-d4913d5a5d83dcdc4271":{"legacy_record_id":"cu-c12200-reference","source_value":{"offset_to_si":0,"scale_to_si":4186.8,"significant_figures":2,"text":".092","unit":"Btu/(lb·°F)"}},"obs-d4953130ff9c7af294fd":{"legacy_record_id":"stainless-therma-4828-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"100","unit":"MPa"}},"obs-d4ba73e4d86a66d339a3":{"legacy_record_id":"tecaform-ah-id-blue-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"10","unit":"%"}},"obs-d4bb9f37dc1e943e3565":{"legacy_record_id":"tecast-l-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"95","unit":"MPa"}},"obs-d4bc26f5603c5d6902c1":{"legacy_record_id":"stainless-therma-314-4841-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"430","unit":"MPa"}},"obs-d4cd3ac59b81d16d49cc":{"legacy_record_id":"stainless-therma-253-ma-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"176","unit":"MPa"}},"obs-d4e85ac1edba1b93fe5e":{"legacy_record_id":"tecam-6-mo-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"84","unit":"MPa"}},"obs-d535470b93a0b9097cee":{"legacy_record_id":"stainless-forta-ldx-2404-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"750–900","unit":"MPa"}},"obs-d5bee7e86783717200f7":{"legacy_record_id":"stainless-core-441-4509-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"25","unit":"W/(m·K)"}},"obs-d5d6001644477f3094c0":{"legacy_record_id":"coorstek-puresic-cvd-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":4,"text":"140.0","unit":"W/(m·K)"}},"obs-d5e98bf6742e28efde25":{"legacy_record_id":"tecatron-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.25","unit":"W/(m·K)"}},"obs-d62391ad638cc756bf7d":{"legacy_record_id":"steel-uddeholm-caldie-hardened-and-tempered-60-61-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"460","unit":"J/(kg·°C)"}},"obs-d628578ec5b9cd620809":{"legacy_record_id":"tecaform-ah-san-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"2,900","unit":"MPa"}},"obs-d6321732e80896dc56c6":{"legacy_record_id":"stainless-therma-309s-4833-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"450","unit":"MPa"}},"obs-d6442d9012ca5094b61b":{"legacy_record_id":"cu-c17510-reference","source_value":{"offset_to_si":0,"scale_to_si":1.730734666295328,"significant_figures":3,"text":"144","unit":"Btu/(ft·hr·°F)"}},"obs-d75b72febe290ffe6388":{"legacy_record_id":"tecapeek-els-nano-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"178","unit":"MPa"}},"obs-d775f65cf70448ca409e":{"legacy_record_id":"coorstek-plasmapure-uc-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"400","unit":"MPa"}},"obs-d78fa87a9ad97e32e0a0":{"legacy_record_id":"nickel-ultra-alloy-825-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"10.5","unit":"W/(m·K)"}},"obs-d79155187205dc30eadc":{"legacy_record_id":"tecapeek-st-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"193","unit":"MPa"}},"obs-d7dc72bb66dd950e8f7d":{"legacy_record_id":"steel-atlas-m1030-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"12","unit":"%"}},"obs-d80bf901c73c300aac37":{"legacy_record_id":"tecapeek-cf30-mt-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"188","unit":"MPa"}},"obs-d81ec3322ef47df05d33":{"legacy_record_id":"tecasint-2021-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"4,400","unit":"MPa"}},"obs-d844fe240620ea47eea1":{"legacy_record_id":"stainless-core-301-4310-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"40","unit":"%"}},"obs-d8556a56fc7d354eb964":{"legacy_record_id":"stainless-forta-dx-2205-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"500","unit":"MPa"}},"obs-d8561e1e6c94e3e3e3f5":{"legacy_record_id":"tecamid-66-cf20-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"135","unit":"MPa"}},"obs-d8cbac7c97e02129a011":{"legacy_record_id":"coorstek-ad-94-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"880","unit":"J/(kg·K)"}},"obs-d8f8441a393a258d3cf5":{"legacy_record_id":"al-6082-t5","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"8","unit":"%"}},"obs-d955d3f135c515ca2ad9":{"legacy_record_id":"tecaform-ah-san-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.41","unit":"g/cm³"}},"obs-d96c74e09741e9b88f26":{"legacy_record_id":"al-6101-t63","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"185","unit":"MPa"}},"obs-d981ce28a7fac3b35c53":{"legacy_record_id":"tecaform-ah-natural-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.39","unit":"W/(m·K)"}},"obs-d9ba4b6925249526aff4":{"legacy_record_id":"tecapeek-cf30-mt-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"6,000","unit":"MPa"}},"obs-d9c0135d79b758e48775":{"legacy_record_id":"tecamid-66-cf20-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.23","unit":"g/cm³"}},"obs-d9d7ecaf056fcd621b55":{"legacy_record_id":"tecasint-4111-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"160","unit":"MPa"}},"obs-d9e337c8287a5850e062":{"legacy_record_id":"stainless-therma-321h-4878-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"472","unit":"J/(kg·K)"}},"obs-d9e44d55c657e5416d88":{"legacy_record_id":"stainless-therma-4828-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"410","unit":"MPa"}},"obs-d9f489de56ae3ddb73e4":{"legacy_record_id":"stainless-ultra-6xn-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"12","unit":"W/(m·K)"}},"obs-da4aa36350d2d87320de":{"legacy_record_id":"tecapei-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.21","unit":"W/(m·K)"}},"obs-da5e7e89b8155c5560f7":{"legacy_record_id":"cu-c18700-reference","source_value":{"offset_to_si":0,"scale_to_si":1.730734666295328,"significant_figures":3,"text":"218","unit":"Btu/(ft·hr·°F)"}},"obs-da7f67f3fa34baeae3c9":{"legacy_record_id":"tecasint-2021-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"3.7","unit":"%"}},"obs-da8871cfc635d7659d5c":{"legacy_record_id":"tecapeek-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"116","unit":"MPa"}},"obs-da9db7f646ab5a4f64c2":{"legacy_record_id":"steel-atlas-4340-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"14","unit":"%"}},"obs-daadf6900a85d4a8c3a5":{"legacy_record_id":"al-6005-t5","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"188","unit":"W/(m·K)"}},"obs-dac23b02d073ae77641d":{"legacy_record_id":"al-6063-t1","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"193","unit":"W/(m·K)"}},"obs-dad156637f437027aa0e":{"legacy_record_id":"stainless-therma-304h-4948-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"450","unit":"J/(kg·K)"}},"obs-db743f7cb0b748d5861d":{"legacy_record_id":"steel-atlas-4340-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"930–1080","unit":"MPa"}},"obs-dbb6eba8ec2a370d1774":{"legacy_record_id":"coorstek-esd-alumina-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.22","unit":"1"}},"obs-dc273b9ca46f9ecae565":{"legacy_record_id":"stainless-therma-314-4841-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"385","unit":"MPa"}},"obs-dc56ab6ab65c57f7c7d9":{"legacy_record_id":"stainless-therma-253-ma-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"538","unit":"MPa"}},"obs-dcc80237d775fa9f5d41":{"legacy_record_id":"al-6105-t5","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"260","unit":"MPa"}},"obs-dd66ecf8f299dc05f4a1":{"legacy_record_id":"coorstek-hp-aln-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.25","unit":"1"}},"obs-dd7da8e82fb5896b26e1":{"legacy_record_id":"coorstek-hp-aln-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"3.26","unit":"g/cm³"}},"obs-dd7e09bb11cf2be540a3":{"legacy_record_id":"tecamid-46-redbrown-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"132","unit":"MPa"}},"obs-dd999043a964a30657bc":{"legacy_record_id":"steel-uddeholm-carmo-hardened-and-tempered-240-270-hb","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"196000","unit":"MPa"}},"obs-ddc1695cc9a8bfdf86d9":{"legacy_record_id":"steel-uddeholm-arne-hardened-and-tempered-62-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":4,"text":"7800","unit":"kg/m³"}},"obs-ddfc528508a89db32807":{"legacy_record_id":"stainless-core-439m-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"460","unit":"J/(kg·K)"}},"obs-de122bb49d8a9c14beeb":{"legacy_record_id":"al-6105-t6","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"8","unit":"%"}},"obs-de1d9028fa71004ac7d1":{"legacy_record_id":"steel-uddeholm-sverker-21-hardened-and-tempered-62-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"23.0","unit":"W/(m·°C)"}},"obs-debdf403af18af57e7d2":{"legacy_record_id":"stainless-ultra-725ln-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"195","unit":"GPa"}},"obs-ded5f99b88229ea99131":{"legacy_record_id":"tecatec-peek-cw50-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"491","unit":"MPa"}},"obs-df7d4f4b7f58e2ded4ba":{"legacy_record_id":"steel-uddeholm-rigor-hardened-and-tempered-62-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"190000","unit":"N/mm²"}},"obs-df8a0abccca899fe6fdb":{"legacy_record_id":"tecapeek-cmf-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.38","unit":"W/(m·K)"}},"obs-df941f7a2b7f44c85c94":{"legacy_record_id":"tecanat-gf30-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.32","unit":"W/(m·K)"}},"obs-dfb8569ab795de660e5d":{"legacy_record_id":"cu-c75200-reference","source_value":{"offset_to_si":0,"scale_to_si":4186.8,"significant_figures":1,"text":".09","unit":"Btu/(lb·°F)"}},"obs-dfe56d3c31f851eca176":{"legacy_record_id":"stainless-therma-304h-4948-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"410","unit":"MPa"}},"obs-e0071d31927bbf52b6d2":{"legacy_record_id":"tecapet-tf-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"3,200","unit":"MPa"}},"obs-e00a734955fab179316e":{"legacy_record_id":"cu-c48500-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":".305","unit":"lb/in³"}},"obs-e045cae3b7f9e959ae53":{"legacy_record_id":"stainless-supra-316plus-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"35","unit":"%"}},"obs-e04ad846f5213429d0f4":{"legacy_record_id":"tecason-p-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"2,300","unit":"MPa"}},"obs-e05029e6d0a932933a4a":{"legacy_record_id":"tecasint-4011-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":1,"text":"0.4","unit":"W/(m·K)"}},"obs-e07a7b39b86fddc1f876":{"legacy_record_id":"tecamid-66-la-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"102","unit":"MPa"}},"obs-e07cd688784451f093b4":{"legacy_record_id":"stainless-core-304ln-4311-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"200","unit":"GPa"}},"obs-e0c080897fdd884a3995":{"legacy_record_id":"stainless-core-304l-4307-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"520–700","unit":"MPa"}},"obs-e1019d163b5470b17129":{"legacy_record_id":"al-6063-t1","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"12","unit":"%"}},"obs-e108fed711d391ba4868":{"legacy_record_id":"steel-atlas-m1020-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"380","unit":"MPa"}},"obs-e10b65501a2d38d4df35":{"legacy_record_id":"tecanyl-gf30-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"4,100","unit":"MPa"}},"obs-e11046d0359774cc9ac0":{"legacy_record_id":"stainless-core-321-4541-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.9","unit":"kg/dm³"}},"obs-e13bd836feeb2740f43c":{"legacy_record_id":"tecanat-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"69","unit":"MPa"}},"obs-e1730efbb68a89e0b3e0":{"legacy_record_id":"stainless-core-304-4301-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"540–750","unit":"MPa"}},"obs-e1a25274018bf6390668":{"legacy_record_id":"stainless-therma-4724-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.7","unit":"kg/dm³"}},"obs-e1cdf6dfc90f5f7ce57a":{"legacy_record_id":"stainless-ultra-6xn-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"450","unit":"J/(kg·K)"}},"obs-e1cfbde29cef493a798a":{"legacy_record_id":"steel-uddeholm-carmo-hardened-and-tempered-240-270-hb","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"460","unit":"J/(kg·°C)"}},"obs-e1f4bbbc3a2566404a10":{"legacy_record_id":"steel-atlas-6587-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"785","unit":"MPa"}},"obs-e23ca074f3509bc189ca":{"legacy_record_id":"steel-atlas-6582-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"10","unit":"%"}},"obs-e24988389378a144f3fc":{"legacy_record_id":"coorstek-plasmapure-uc-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"33.0","unit":"W/(m·K)"}},"obs-e24a23f65bc61f687846":{"legacy_record_id":"stainless-therma-347h-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"200","unit":"GPa"}},"obs-e2589da08e3d7080ba06":{"legacy_record_id":"tecarim-1500-yellow-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"53","unit":"MPa"}},"obs-e27e7e94b86a8a4def2c":{"legacy_record_id":"stainless-therma-347h-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.9","unit":"kg/dm³"}},"obs-e29e62f7d5bd3d78c728":{"legacy_record_id":"tecapeek-ht-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"4,600","unit":"MPa"}},"obs-e2d17763bb3d7709ddc1":{"legacy_record_id":"tecaform-ad-af-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.49","unit":"g/cm³"}},"obs-e2edaec785b1162545d8":{"legacy_record_id":"stainless-therma-4828-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"91","unit":"MPa"}},"obs-e32e197791ac697fcde4":{"legacy_record_id":"stainless-core-201-4372-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"680–880","unit":"MPa"}},"obs-e33b327df53475a79953":{"legacy_record_id":"stainless-supra-316-4401-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"40","unit":"%"}},"obs-e36c99d6a1aae4e3fe0f":{"legacy_record_id":"stainless-therma-309s-4833-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"150","unit":"GPa"}},"obs-e377929223993c279eea":{"legacy_record_id":"steel-atlas-6582-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"540","unit":"MPa"}},"obs-e386710d0059410c798b":{"legacy_record_id":"steel-atlas-6582-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"11","unit":"%"}},"obs-e39c126b41a78ffea3f8":{"legacy_record_id":"tecapet-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"10","unit":"%"}},"obs-e3b1a5fb0bed6d0b623e":{"legacy_record_id":"tecasint-1011-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"210","unit":"MPa"}},"obs-e3d68bd73b9c7b589108":{"legacy_record_id":"tecasint-1041-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.67","unit":"g/cm³"}},"obs-e3dda7e4d0c5f6fa04a3":{"legacy_record_id":"tecapeek-classix-white-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"1.4","unit":"g/cm³"}},"obs-e41399b1ce41825e9a57":{"legacy_record_id":"stainless-therma-4724-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"220","unit":"GPa"}},"obs-e48da4b39b3d09726ff4":{"legacy_record_id":"tecamid-66-cf20-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"104","unit":"MPa"}},"obs-e499ff8cd4471a9e900c":{"legacy_record_id":"tecamid-66-hi-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"112","unit":"MPa"}},"obs-e49b80feddffeaadb063":{"legacy_record_id":"steel-uddeholm-orvar-supreme-hardened-and-tempered-45-1-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"25","unit":"W/(m·°C)"}},"obs-e4b9ba561de8fc550b9f":{"legacy_record_id":"stainless-therma-253-ma-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"200","unit":"GPa"}},"obs-e4d0f73ad703d3713f47":{"legacy_record_id":"coorstek-dura-z-ttz-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"200","unit":"GPa"}},"obs-e520305188df789885dd":{"legacy_record_id":"stainless-therma-321h-4878-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"360","unit":"MPa"}},"obs-e526dadef15edcc9dd87":{"legacy_record_id":"stainless-therma-314-4841-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"140","unit":"MPa"}},"obs-e58ea36018d9f6ccf664":{"legacy_record_id":"stainless-forta-sdx-2507-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"750–1000","unit":"MPa"}},"obs-e5aa94ebbed46e459e56":{"legacy_record_id":"cu-c10100-reference","source_value":{"offset_to_si":0,"scale_to_si":4186.8,"significant_figures":2,"text":".092","unit":"Btu/(lb·°F)"}},"obs-e5b6a8259df5a0cb57e6":{"legacy_record_id":"tecapeek-mt-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"4,200","unit":"MPa"}},"obs-e5ba75efc6853cce9e0e":{"legacy_record_id":"steel-atlas-4140-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"12","unit":"%"}},"obs-e602419d43e0ffb50a5f":{"legacy_record_id":"tecamid-6-gf25-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"143","unit":"MPa"}},"obs-e613937de9c6e3490cd0":{"legacy_record_id":"tecatron-pvx-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"91","unit":"MPa"}},"obs-e6841d4e061486354b9f":{"legacy_record_id":"tecamid-66-la-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"3,100","unit":"MPa"}},"obs-e689373e204a428f23d0":{"legacy_record_id":"stainless-forta-ldx-2101-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"500","unit":"J/(kg·K)"}},"obs-e69ef63fc535611347be":{"legacy_record_id":"stainless-therma-310s-4845-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"108","unit":"MPa"}},"obs-e6bedc6ecf434ae8d05d":{"legacy_record_id":"stainless-therma-4828-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"120","unit":"GPa"}},"obs-e6da7cd7aac169fef04d":{"legacy_record_id":"tecasint-5051-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"3.4","unit":"%"}},"obs-e6e2c658242fb87ac693":{"legacy_record_id":"tecast-tm-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.33","unit":"W/(m·K)"}},"obs-e6fa994f677d7e0b6357":{"legacy_record_id":"al-6101-t63","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"218","unit":"W/(m·K)"}},"obs-e6fb3b8ab14aa742ecfd":{"legacy_record_id":"tecaform-ah-sd-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.30","unit":"W/(m·K)"}},"obs-e6fc793b3c0e6f3fd6c6":{"legacy_record_id":"coorstek-ad-90-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"276","unit":"GPa"}},"obs-e7027dd603ed20da6be9":{"legacy_record_id":"stainless-therma-310s-4845-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"128","unit":"MPa"}},"obs-e761858aa5d4dd5cde65":{"legacy_record_id":"tecasint-1021-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"4,000","unit":"MPa"}},"obs-e796da12f7af929e0b20":{"legacy_record_id":"tecafine-pmp-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"67","unit":"%"}},"obs-e7c2b34493f774b6219b":{"legacy_record_id":"cu-c17300-reference","source_value":{"offset_to_si":0,"scale_to_si":1.730734666295328,"significant_figures":2,"text":"62–75","unit":"Btu/(ft·hr·°F)"}},"obs-e7dd0baf35586ae3ed13":{"legacy_record_id":"steel-atlas-m1020-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"480","unit":"MPa"}},"obs-e7df292e04237ddb2d94":{"legacy_record_id":"steel-atlas-8620h-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"11","unit":"%"}},"obs-e7ea0fcff9a222538d6d":{"legacy_record_id":"steel-atlas-m1030-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"520","unit":"MPa"}},"obs-e7f5695f25a4da09318a":{"legacy_record_id":"stainless-supra-316plus-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.9","unit":"kg/dm³"}},"obs-e809b74065fc4f620033":{"legacy_record_id":"tecaform-ah-la-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"48","unit":"MPa"}},"obs-e82f80c987d071411149":{"legacy_record_id":"steel-uddeholm-orvar-supreme-hardened-and-tempered-45-1-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"30","unit":"W/(m·°C)"}},"obs-e83119f93b3a668471fe":{"legacy_record_id":"steel-uddeholm-carmo-hardened-and-tempered-270-hb","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"670","unit":"MPa"}},"obs-e849489d7fc55a17cb66":{"legacy_record_id":"tecapeek-mt-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"175","unit":"MPa"}},"obs-e85a39e1e1cbb5d9e5dc":{"legacy_record_id":"stainless-forta-ldx-2404-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.7","unit":"kg/dm³"}},"obs-e86812280b9e8d93d496":{"legacy_record_id":"stainless-therma-310s-4845-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"120","unit":"GPa"}},"obs-e88db762980ec0826e1d":{"legacy_record_id":"cu-c18200-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":".321","unit":"lb/in³"}},"obs-e8cd5cfe6ee598f29f07":{"legacy_record_id":"al-1060-o","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"15","unit":"MPa"}},"obs-e95e692fd4d32944477b":{"legacy_record_id":"al-6005-t5","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"260","unit":"MPa"}},"obs-e996bf18d0de9d0245d8":{"legacy_record_id":"steel-atlas-micro900-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"850–1000","unit":"MPa"}},"obs-e99f66cf7460f01702ac":{"legacy_record_id":"stainless-supra-316-4401-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"530–680","unit":"MPa"}},"obs-e9a3fc924aadf35cdd15":{"legacy_record_id":"tecaform-ah-natural-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"2,800","unit":"MPa"}},"obs-e9fb633db9462d4e46ab":{"legacy_record_id":"steel-uddeholm-stavax-esr-hardened-and-tempered-50-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":4,"text":"7700","unit":"kg/m³"}},"obs-ea5bcbd22cb5151120b4":{"legacy_record_id":"al-6082-t6","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"240","unit":"MPa"}},"obs-ea8368d25a91f13748e9":{"legacy_record_id":"tecasint-1011-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"116","unit":"MPa"}},"obs-eab424013cbc3be19c64":{"legacy_record_id":"stainless-therma-321h-4878-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"340","unit":"MPa"}},"obs-eab978a44a63e1704efa":{"legacy_record_id":"al-6005a-t5","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"260","unit":"MPa"}},"obs-eac65dbfe73ec1ff1ace":{"legacy_record_id":"tecapeek-tf10-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"3,400","unit":"MPa"}},"obs-eae6d223822c8fead058":{"legacy_record_id":"tecasint-1061-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.48","unit":"g/cm³"}},"obs-eb2aa55fa6e27ee0d18b":{"legacy_record_id":"tecaform-ah-natural-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"67","unit":"MPa"}},"obs-eb67ad1392de6e57b1ea":{"legacy_record_id":"stainless-core-304ln-4311-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"500","unit":"J/(kg·K)"}},"obs-eb87fb79482d981e7893":{"legacy_record_id":"stainless-supra-316l-4432-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-eb8ab50d88625ed3777c":{"legacy_record_id":"stainless-core-321-4541-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"520–720","unit":"MPa"}},"obs-eba9855cb234526cc4e9":{"legacy_record_id":"tecator-5013-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.29","unit":"W/(m·K)"}},"obs-ebdbb58ec08152780880":{"legacy_record_id":"cu-c51000-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":".320","unit":"lb/in³"}},"obs-ebf345b82b0a99bd1260":{"legacy_record_id":"tecasint-5051-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"163","unit":"MPa"}},"obs-ebfe21734d22b09c132a":{"legacy_record_id":"stainless-therma-4828-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"25","unit":"W/(m·K)"}},"obs-ec0764fbe1fd73b96092":{"legacy_record_id":"tecaform-ah-id-blue-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"68","unit":"MPa"}},"obs-ec233a3f72efa76aa10b":{"legacy_record_id":"cu-c33000-reference","source_value":{"offset_to_si":0,"scale_to_si":1.730734666295328,"significant_figures":2,"text":"67","unit":"Btu/(ft·hr·°F)"}},"obs-ec345e386c4a5156a84d":{"legacy_record_id":"steel-atlas-4340-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"12","unit":"%"}},"obs-ec51bd833c4eab7d2106":{"legacy_record_id":"stainless-therma-253-ma-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"120","unit":"GPa"}},"obs-ec9b5e10bb2f1f815e05":{"legacy_record_id":"tecamid-46-redbrown-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"32","unit":"%"}},"obs-ece1fb72ba9e179750fd":{"legacy_record_id":"tecason-s-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.21","unit":"W/(m·K)"}},"obs-ed2b972c2f90efbe0e4c":{"legacy_record_id":"stainless-core-201-4372-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"350","unit":"MPa"}},"obs-ed78d239be388343edb6":{"legacy_record_id":"ti-6al-4v-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"0.930","unit":"J/(g·K)"}},"obs-ed8860e2f832abc68f9b":{"legacy_record_id":"stainless-therma-253-ma-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"533","unit":"MPa"}},"obs-ed8a0ddbec24f7e4ee04":{"legacy_record_id":"stainless-supra-316-4436-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"40","unit":"%"}},"obs-edc9249f82b95afb2257":{"legacy_record_id":"coorstek-nt-154-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"3.22","unit":"g/cm³"}},"obs-edecf29bcb8be77eb289":{"legacy_record_id":"al-6063-t6","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"205","unit":"MPa"}},"obs-ee243f89a4b9527c6a6f":{"legacy_record_id":"tecasint-1101-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"7.4","unit":"%"}},"obs-ee6f46e587ff270dfb0b":{"legacy_record_id":"al-6063-t6","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"8","unit":"%"}},"obs-ee9b788320c482229205":{"legacy_record_id":"cu-c38500-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":".306","unit":"lb/in³"}},"obs-eece5528e4b115902465":{"legacy_record_id":"tecapeek-classix-white-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"117","unit":"MPa"}},"obs-ef0c8316a1c55c6c1955":{"legacy_record_id":"tecaform-ah-sd-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1,300","unit":"MPa"}},"obs-ef316f50417a26960f09":{"legacy_record_id":"coorstek-wc-aci-ni6-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":4,"text":"14.90","unit":"g/cm³"}},"obs-ef3fb6c78cf9536634e4":{"legacy_record_id":"stainless-core-441-4509-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"18","unit":"%"}},"obs-ef8b72cd0c7ec662407e":{"legacy_record_id":"cu-c17300-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":".298","unit":"lb/in³"}},"obs-efc73c5af88ea118367a":{"legacy_record_id":"stainless-therma-347h-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"177","unit":"MPa"}},"obs-f0019486c5ec4a839249":{"legacy_record_id":"stainless-core-201ln-4372-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-f07d726fa7d330d90846":{"legacy_record_id":"coorstek-nbd-200-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"900","unit":"MPa"}},"obs-f0aa58c638862830bad3":{"legacy_record_id":"al-6063-t1","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"193","unit":"W/(m·K)"}},"obs-f0d5d0be5e7e1fb5ff4b":{"legacy_record_id":"stainless-ultra-6xn-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"300","unit":"MPa"}},"obs-f0e59589390a2816a1a7":{"legacy_record_id":"coorstek-cordierite-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"1.6","unit":"W/(m·K)"}},"obs-f1007a28338eca099da1":{"legacy_record_id":"stainless-therma-321h-4878-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"150","unit":"GPa"}},"obs-f13349794c0330466031":{"legacy_record_id":"tecadur-pbt-gf30-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"78","unit":"MPa"}},"obs-f15dce713717b82a3ea4":{"legacy_record_id":"coorstek-steatite-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"140","unit":"MPa"}},"obs-f17daa1912cb64d79b3a":{"legacy_record_id":"tecanyl-mt-coloured-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"8","unit":"%"}},"obs-f1a9d3504e6c5682edc1":{"legacy_record_id":"coorstek-porcelain-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"130","unit":"MPa"}},"obs-f1eee01fdae6af0d5c3e":{"legacy_record_id":"al-6063-t6","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"170","unit":"MPa"}},"obs-f20fc244eff25f4e52b2":{"legacy_record_id":"stainless-supra-316l-4432-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"200","unit":"GPa"}},"obs-f30891c2d476ca446175":{"legacy_record_id":"tecasint-2031-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"65","unit":"MPa"}},"obs-f308c46025d87c10b5de":{"legacy_record_id":"cu-c26000-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":".308","unit":"lb/in³"}},"obs-f318c654fef9e8ca52cd":{"legacy_record_id":"tecaform-ah-sd-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.35","unit":"g/cm³"}},"obs-f3ee5ec2e3419eeb50c8":{"legacy_record_id":"stainless-core-304-4301-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.9","unit":"kg/dm³"}},"obs-f411322c099b72f23e8b":{"legacy_record_id":"stainless-supra-316-4436-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"8.0","unit":"kg/dm³"}},"obs-f432586973d1e8162a3b":{"legacy_record_id":"al-6105-t5","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"8","unit":"%"}},"obs-f44d4138324c5884c180":{"legacy_record_id":"stainless-supra-316plus-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"500","unit":"J/(kg·K)"}},"obs-f46ede37ea44a658d3ae":{"legacy_record_id":"steel-atlas-4340-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"930–1080","unit":"MPa"}},"obs-f481ce7ddd775ff28556":{"legacy_record_id":"tecasint-1021-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"150","unit":"MPa"}},"obs-f489de69d130f8d238ea":{"legacy_record_id":"cu-c22000-reference","source_value":{"offset_to_si":0,"scale_to_si":1.730734666295328,"significant_figures":3,"text":"109","unit":"Btu/(ft·hr·°F)"}},"obs-f4bc6f775cb778da3e19":{"legacy_record_id":"steel-atlas-1045-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"510","unit":"MPa"}},"obs-f4c9b19a9592ae21457e":{"legacy_record_id":"coorstek-sn-101c-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"3.21","unit":"g/cm³"}},"obs-f504a5bcb130c5e82708":{"legacy_record_id":"stainless-therma-309s-4833-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"405","unit":"MPa"}},"obs-f52bedf995379b888a35":{"legacy_record_id":"stainless-forta-sdx-2507-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"15","unit":"W/(m·K)"}},"obs-f53a71b4425513a309d4":{"legacy_record_id":"stainless-therma-347h-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"435","unit":"MPa"}},"obs-f554214087c15c9aede0":{"legacy_record_id":"coorstek-ytzp-sintered-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.30","unit":"1"}},"obs-f5843f323610609d6910":{"legacy_record_id":"stainless-core-201ln-4372-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"7.8","unit":"kg/dm³"}},"obs-f58e488776a4a2c8c142":{"legacy_record_id":"stainless-therma-4828-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"116","unit":"MPa"}},"obs-f59a090f86d93883757f":{"legacy_record_id":"tecast-t-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.15","unit":"g/cm³"}},"obs-f5a903e7edee389a4035":{"legacy_record_id":"steel-atlas-12l14fm-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"290","unit":"MPa"}},"obs-f5e7df12803dd54dece2":{"legacy_record_id":"tecamid-6-gf30-black-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"98","unit":"MPa"}},"obs-f65244a4a63a361ce643":{"legacy_record_id":"ti-6al-4v-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":2,"text":"95–111","unit":"GPa"}},"obs-f65f58639e3104f0a759":{"legacy_record_id":"stainless-therma-309s-4833-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"420","unit":"MPa"}},"obs-f665eea0a767bb7d6a24":{"legacy_record_id":"tecamid-12-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"53","unit":"MPa"}},"obs-f725da9f5459aef696dd":{"legacy_record_id":"coorstek-fg-995-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"27.5","unit":"W/(m·K)"}},"obs-f7366aa6ab1df07b5d3d":{"legacy_record_id":"coorstek-ytzp-hiped-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.30","unit":"1"}},"obs-f77bddb912e4cae70f0b":{"legacy_record_id":"al-6063-t1","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"60","unit":"MPa"}},"obs-f7a41c796d816e1a1a18":{"legacy_record_id":"tecam-6-mo-black-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"37","unit":"%"}},"obs-f83647f4042456b738d7":{"legacy_record_id":"tecaran-abs-grey-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"32","unit":"MPa"}},"obs-f862e383968f26e480cc":{"legacy_record_id":"al-6005-t5","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"240","unit":"MPa"}},"obs-f86866bdca8eebab2db9":{"legacy_record_id":"tecator-5031-pvx-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.60","unit":"W/(m·K)"}},"obs-f87d2b0bcb63e247cb6f":{"legacy_record_id":"steel-atlas-6657-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1030–1330","unit":"MPa"}},"obs-f8948e7e4f559cdc053e":{"legacy_record_id":"coorstek-puresic-cvd-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"470–520","unit":"MPa"}},"obs-f8a8d32176f345b0ebda":{"legacy_record_id":"stainless-supra-316l-4432-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"40","unit":"%"}},"obs-f8c88d1bfe3fd87c5f42":{"legacy_record_id":"stainless-therma-314-4841-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"19","unit":"W/(m·K)"}},"obs-f9a8057458dc3673493b":{"legacy_record_id":"cu-c23000-reference","source_value":{"offset_to_si":0,"scale_to_si":4186.8,"significant_figures":1,"text":".09","unit":"Btu/(lb·°F)"}},"obs-f9b80ca2b7351b94ab4c":{"legacy_record_id":"tecasint-2021-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.45","unit":"g/cm³"}},"obs-fa063b39cdb8907b14c4":{"legacy_record_id":"tecasint-4111-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"1.7","unit":"%"}},"obs-fa753e0e66227b0e8cef":{"legacy_record_id":"tecapro-mt-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"0.93","unit":"g/cm³"}},"obs-fad5528bebb0e68faa2e":{"legacy_record_id":"tecapeek-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.27","unit":"W/(m·K)"}},"obs-faf3ececafaafaa79961":{"legacy_record_id":"stainless-therma-309s-4833-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"116","unit":"MPa"}},"obs-fb010367bc37ad52eae4":{"legacy_record_id":"stainless-therma-310s-4845-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000000.0,"significant_figures":3,"text":"150","unit":"GPa"}},"obs-fb1df3b5a9781d6a8d94":{"legacy_record_id":"stainless-ultra-904l-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"12","unit":"W/(m·K)"}},"obs-fb96591f22e13033ac72":{"legacy_record_id":"steel-atlas-1045-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"540","unit":"MPa"}},"obs-fb9750f8990e90553677":{"legacy_record_id":"steel-uddeholm-arne-hardened-and-tempered-62-hrc","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"33","unit":"W/(m·°C)"}},"obs-fbae2bde111f90ad9801":{"legacy_record_id":"steel-atlas-6587-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"835","unit":"MPa"}},"obs-fbb1a4ca40e238f3a2ac":{"legacy_record_id":"coorstek-ad-85-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.22","unit":"1"}},"obs-fc01d397725bb2f302a9":{"legacy_record_id":"stainless-therma-4828-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"140","unit":"MPa"}},"obs-fc24af25c8a354afda12":{"legacy_record_id":"tecamid-12-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.30","unit":"W/(m·K)"}},"obs-fc49d3ae49a3e5d0a9f8":{"legacy_record_id":"stainless-therma-314-4841-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"128","unit":"MPa"}},"obs-fc4f917a34ee1fe3ba5c":{"legacy_record_id":"coorstek-steatite-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"2.78","unit":"g/cm³"}},"obs-fc57641bcc18a68f8ab5":{"legacy_record_id":"stainless-ultra-254-smo-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"500","unit":"J/(kg·K)"}},"obs-fc5b98d2a648ecf26229":{"legacy_record_id":"stainless-therma-347h-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"136","unit":"MPa"}},"obs-fc5d65edbd6f1906b9c1":{"legacy_record_id":"tecasint-1021-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":3,"text":"1.42","unit":"g/cm³"}},"obs-fce1969c6006558f33eb":{"legacy_record_id":"stainless-core-304-4301-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"230","unit":"MPa"}},"obs-fce725d2464de9c56cfe":{"legacy_record_id":"stainless-therma-347h-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"157","unit":"MPa"}},"obs-fcf56bcd7659aadffa37":{"legacy_record_id":"stainless-ultra-254-smo-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"8.0","unit":"kg/dm³"}},"obs-fd14c9f4e8bc763c7a83":{"legacy_record_id":"steel-atlas-m1030-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"560","unit":"MPa"}},"obs-fd562a821429c26c2fac":{"legacy_record_id":"al-6061-t6","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"240","unit":"MPa"}},"obs-fd96c3816665d0391cbf":{"legacy_record_id":"tecasint-1041-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":2,"text":"82","unit":"MPa"}},"obs-fdb31a8cb654f1509701":{"legacy_record_id":"tecasint-2391-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"2.9","unit":"%"}},"obs-fdda1d229ebbb530049b":{"legacy_record_id":"al-6005a-t61","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"260","unit":"MPa"}},"obs-fde502557626defbf2b8":{"legacy_record_id":"tecaform-ah-mt-coloured-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":2,"text":"0.39","unit":"W/(m·K)"}},"obs-fde8962f24aa11aff552":{"legacy_record_id":"tecaform-ad-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"106","unit":"MPa"}},"obs-fe123c0964a265442590":{"legacy_record_id":"cu-c14300-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":".323","unit":"lb/in³"}},"obs-fe4e582bdc31a24f4955":{"legacy_record_id":"cu-c36000-reference","source_value":{"offset_to_si":0,"scale_to_si":1.730734666295328,"significant_figures":2,"text":"67","unit":"Btu/(ft·hr·°F)"}},"obs-fe83a45630b6e2441cd2":{"legacy_record_id":"stainless-ultra-654-smo-reference","source_value":{"offset_to_si":0,"scale_to_si":1000,"significant_figures":2,"text":"8.0","unit":"kg/dm³"}},"obs-febe28d4ab6320ea7ce8":{"legacy_record_id":"stainless-ultra-6xn-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":2,"text":"35","unit":"%"}},"obs-fecf1a5903cfa69c4ab3":{"legacy_record_id":"coorstek-sn-101c-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1000","unit":"MPa"}},"obs-fee443be843031cc4ec7":{"legacy_record_id":"steel-uddeholm-orvar-supreme-hardened-and-tempered-52-hrc","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"1520","unit":"MPa"}},"obs-feeec1be8955b0c918b8":{"legacy_record_id":"stainless-therma-253-ma-reference","source_value":{"offset_to_si":0,"scale_to_si":1,"significant_figures":3,"text":"500","unit":"J/(kg·K)"}},"obs-ff3ba9bc18ab1c422b58":{"legacy_record_id":"tecaform-ah-id-blue-reference","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":4,"text":"3,200","unit":"MPa"}},"obs-ff52c8ff246b088db538":{"legacy_record_id":"cu-c36000-reference","source_value":{"offset_to_si":0,"scale_to_si":27679.90471020312,"significant_figures":3,"text":".307","unit":"lb/in³"}},"obs-ff93bbc7e77925ce6cbf":{"legacy_record_id":"steel-atlas-6587-reference","source_value":{"offset_to_si":0,"scale_to_si":0.01,"significant_figures":1,"text":"8","unit":"%"}},"obs-ffdddeac9e4a67e6311c":{"legacy_record_id":"al-6005a-t1","source_value":{"offset_to_si":0,"scale_to_si":1000000.0,"significant_figures":3,"text":"170","unit":"MPa"}}},"sources":[{"id":"ensinger-manual","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","notes":"Material standard values, pages 88–97. Typical guideline values after machining; moisture and specimen orientation affect results. The manual does not establish present product availability.","organization":"Ensinger","publication_date":null,"retrieved_date":"2026-09-07","revision":"Snapshot 9b46c0ae1e72","sha256":"9b46c0ae1e7253fcbd39da6a36cfc2e7f00abbb3bba4e882795c2e18b86b7b4c","source_type":"manufacturer_datasheet","title":"Stock shapes — Engineering plastics manual"},{"id":"coorstek","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","notes":"Page 1, selected ceramic columns. Typical values; process, size, and shape affect properties. Generic steel comparison column excluded.","organization":"CoorsTek","publication_date":"2017","retrieved_date":"2026-09-07","revision":"Snapshot 9de5bd60a1b8","sha256":"9de5bd60a1b883e4230e2d9e6c625c23733cbe4443f01b2cabe21bebe063ab2f","source_type":"manufacturer_datasheet","title":"Ceramic Material Properties"},{"id":"outokumpu-core","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","notes":"Table 5: cold rolled sheet mechanical limits, with footnote-specific standards. Table 7: metric physical values. Table 6 is not imported; some published rows contain apparent unit inconsistencies.","organization":"Outokumpu","publication_date":null,"retrieved_date":"2026-09-07","revision":"Snapshot 91d2f4b13405","sha256":"91d2f4b1340562b0d692a3921a5b0ea2518ddcb6cbdcc9ec97a3d7ad886d7ad9","source_type":"manufacturer_datasheet","title":"Core range datasheet"},{"id":"outokumpu-supra","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","notes":"Table 5: cold rolled sheet mechanical limits. Table 7: metric physical values. EN grades with the same ASTM name remain distinct.","organization":"Outokumpu","publication_date":null,"retrieved_date":"2026-09-07","revision":"Snapshot 39e9860f4900","sha256":"39e9860f49003d5731eb005d30bb49c368dd9a02abc4609f1cdf1dcf14777f4a","source_type":"manufacturer_datasheet","title":"Supra range datasheet"},{"id":"outokumpu-forta","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","notes":"Table 5: cold rolled coil limits; EDX 2304 follows MDS-D35 and reports A5 instead of A80. Table 9: grade-wide metric physical values. Generic duplex Table 11 and comparison grades excluded.","organization":"Outokumpu","publication_date":null,"retrieved_date":"2026-09-10","revision":"Snapshot 3283f08f406a","sha256":"3283f08f406a50b4bb833fa56a22134881a6df254b55f66ad40b3d895e51774d","source_type":"manufacturer_datasheet","title":"Forta Duplex range datasheet"},{"id":"outokumpu-therma","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","notes":"Table 14: metric physical values at the stated temperatures. Tables 5 and 7: elevated-temperature minimum Rp0.2 and Rm, Outokumpu values based on EN 10028-7. Guidance-only maximum application temperatures, creep tables and imperial duplicates excluded.","organization":"Outokumpu","publication_date":null,"retrieved_date":"2026-09-10","revision":"Snapshot 146c7dd9817a","sha256":"146c7dd9817aebe3a13b57f7ed6aaf04d7798391850a839db517fec48b8e0ed7","source_type":"manufacturer_datasheet","title":"Therma range datasheet"},{"id":"outokumpu-ultra","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","notes":"Table 13: metric physical values. Table 10: cold rolled values, with ISO 6208 and revision footnotes retained. Ultra 725LN has physical data only in this batch. Ultra 317L is not assigned the conditional plate designation EN 1.4438. Alloy 825 is a nickel alloy.","organization":"Outokumpu","publication_date":null,"retrieved_date":"2026-09-10","revision":"Snapshot 062d6a8d97e1","sha256":"062d6a8d97e14e5819d49a069efe92f0729a44a98ece2387d0ae30c375ffd10c","source_type":"manufacturer_datasheet","title":"Ultra range datasheet"},{"id":"hydro-1xxx","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","notes":"Selected standard extrusion tempers from page 2; alloy-wide density separately scoped. Mechanical limits use the printed MPa values; thickness uses the inches column. Thermal conductivity is typical at 25 °C. Elongation exemptions retained. Comparison grades, cold-finished and special tempers excluded; conflicting thickness rows deferred.","organization":"Hydro","publication_date":"2019-02","retrieved_date":"2026-09-10","revision":"Snapshot 29d1d35c4512","sha256":"29d1d35c4512c30de806d939841374113b23d20b320bc89cda069866538914ca","source_type":"manufacturer_datasheet","title":"Alloy 1xxx datasheet"},{"id":"hydro-6005-6105","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","notes":"Selected standard extrusion tempers from page 2; alloy-wide density separately scoped. Mechanical limits use the printed MPa values; thickness uses the inches column. Thermal conductivity is typical at 25 °C. Elongation exemptions retained. Comparison grades, cold-finished and special tempers excluded; conflicting thickness rows deferred.","organization":"Hydro","publication_date":"2019-02","retrieved_date":"2026-09-10","revision":"Snapshot 8cd88d53aa4b","sha256":"8cd88d53aa4b1d9bd7ac8836a14e675b788a01bd2dc6d3a802964b6a643e45d1","source_type":"manufacturer_datasheet","title":"Alloy 6005/6105 datasheet"},{"id":"hydro-6005a","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","notes":"Selected standard extrusion tempers from page 2; alloy-wide density separately scoped. Mechanical limits use the printed MPa values; thickness uses the inches column. Thermal conductivity is typical at 25 °C. Elongation exemptions retained. Comparison grades, cold-finished and special tempers excluded; conflicting thickness rows deferred.","organization":"Hydro","publication_date":"2019-03","retrieved_date":"2026-09-10","revision":"Snapshot fe225f0e18d2","sha256":"fe225f0e18d21050714cee09db3a1b4cd7f31124cc6ea5a1685e46e4088b255d","source_type":"manufacturer_datasheet","title":"Alloy 6005A datasheet"},{"id":"hydro-6063","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","notes":"Selected standard extrusion tempers from page 2; alloy-wide density separately scoped. Mechanical limits use the printed MPa values; thickness uses the inches column. Thermal conductivity is typical at 25 °C. Elongation exemptions retained. Comparison grades, cold-finished and special tempers excluded; conflicting thickness rows deferred.","organization":"Hydro","publication_date":"2026-06","retrieved_date":"2026-09-10","revision":"Snapshot 3a65ab041373","sha256":"3a65ab04137342fe6ad10de8d79ef7ec5226b56f3d3af093418b52164c5ed598","source_type":"manufacturer_datasheet","title":"Alloy 6063 datasheet"},{"id":"hydro-6042","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","notes":"Selected standard extrusion tempers from page 2; alloy-wide density separately scoped. Mechanical limits use the printed MPa values; thickness uses the inches column. Thermal conductivity is typical at 25 °C. Elongation exemptions retained. Comparison grades, cold-finished and special tempers excluded; conflicting thickness rows deferred.","organization":"Hydro","publication_date":"2019-02","retrieved_date":"2026-09-10","revision":"Snapshot 9b15135ddb95","sha256":"9b15135ddb954d78ee342dabaf510ca3a779a16e4eb39d0a0e7dd5a45207b835","source_type":"manufacturer_datasheet","title":"Alloy 6042 datasheet"},{"id":"hydro-6082","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","notes":"Selected standard extrusion tempers from page 2; alloy-wide density separately scoped. Mechanical limits use the printed MPa values; thickness uses the inches column. Thermal conductivity is typical at 25 °C. Elongation exemptions retained. Comparison grades, cold-finished and special tempers excluded; conflicting thickness rows deferred.","organization":"Hydro","publication_date":"2019-03","retrieved_date":"2026-09-10","revision":"Snapshot d7558e451216","sha256":"d7558e451216c2d10ac8f26f1e568b3af6c7cc7fb60debbab61e41de6f9257eb","source_type":"manufacturer_datasheet","title":"Alloy 6082 datasheet"},{"id":"hydro-6101","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","notes":"Selected standard extrusion tempers from page 2; alloy-wide density separately scoped. Mechanical limits use the printed MPa values; thickness uses the inches column. Thermal conductivity is typical at 25 °C. Elongation exemptions retained. Comparison grades, cold-finished and special tempers excluded; conflicting thickness rows deferred.","organization":"Hydro","publication_date":"2019-02","retrieved_date":"2026-09-10","revision":"Snapshot 384ef3a688d9","sha256":"384ef3a688d90b2a95a478f363afd25a11408a5109e447202d8e2683c3c56f03","source_type":"manufacturer_datasheet","title":"Alloy 6101 datasheet"},{"id":"hydro-6262","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","notes":"Selected standard extrusion tempers from page 2; alloy-wide density separately scoped. Mechanical limits use the printed MPa values; thickness uses the inches column. Thermal conductivity is typical at 25 °C. Elongation exemptions retained. Comparison grades, cold-finished and special tempers excluded; conflicting thickness rows deferred.","organization":"Hydro","publication_date":"2019-02","retrieved_date":"2026-09-10","revision":"Snapshot 5f34fe9c786e","sha256":"5f34fe9c786e96b8cbcc6b7f7d51a08563195c4e7767e805733302e76f877d29","source_type":"manufacturer_datasheet","title":"Alloy 6262 datasheet"},{"id":"copper-alloys-guide","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","notes":"Physical Properties, printed page 74 (PDF page 76): selected density, thermal conductivity and specific heat at 68 °F. Supplier reference values, not design allowables; no mechanical temper is implied. C18200 conductivity over 68–212 °F excluded. Commercial-only names and missing cells excluded.","organization":"thyssenkrupp Materials NA — Copper and Brass Sales","publication_date":null,"retrieved_date":"2026-09-10","revision":"Snapshot e0fcfa64e560","sha256":"e0fcfa64e560c8bfa03574fa045e8acfe84c3b62daad2313fd4e2af30b957062","source_type":"supplier_catalog","title":"Copper and Alloys guide"},{"id":"timet-6-4","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","notes":"Page 1 Table 2 physical values, assigned to the base Ti-6Al-4V grade only. Conductivity is explicitly mill annealed; modulus intervals depend on texture and heat treatment. ELI and Ru variants are not separate imported identities. Chart-derived strength values excluded.","organization":"TIMET","publication_date":null,"retrieved_date":"2026-09-10","revision":"Snapshot 824684f7d560","sha256":"824684f7d5603af19e0d0862e1af1289f4ea64ae7fac7f54e649ae0f80040822","source_type":"manufacturer_datasheet","title":"TIMETAL 6-4, 6-4 ELI and 6-4-.1Ru datasheet"},{"id":"timet-6246","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","notes":"Page 1 Table 2 physical values, except conductivity over a temperature interval. Table 3 minimum tensile rows for duplex annealed material ≤2.00 in and solution treated and aged material ≤2.50 in; size, temperature and heat-treatment footnotes retained. No temperature inferred for specific heat.","organization":"TIMET","publication_date":null,"retrieved_date":"2026-09-10","revision":"Snapshot 3f1ec178c197","sha256":"3f1ec178c197411eb5193fdaf99689558bbd2667a59c41910b9d84b57b408132","source_type":"manufacturer_datasheet","title":"TIMETAL 6-2-4-6 datasheet"},{"id":"atlas-engineering-bar","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","notes":"Selected sections 4.1–4.13. Carbon/free-machining and case-hardened core values are typical references, not guaranteed supply minima. Through-hardening and Micro900 supply limits are separately identified. Diameter, gauge-length and heat-treatment qualifications retained. Printed January 2005, edition 1; URL filename also mentions October 2011.","organization":"Atlas Specialty Metals","publication_date":"2005-01","retrieved_date":"2026-09-10","revision":"Snapshot 93df7cb85e0e","sha256":"93df7cb85e0e977836c6ff5388be1a12a129fca1ffb8889894931ab3d9c4d71d","source_type":"supplier_catalog","title":"Technical Handbook of Bar Products"},{"id":"uddeholm-arne","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","notes":"Selected metric physical-property tables and tabulated tensile properties. Heat treatment, hardness, specimen scope and temperatures retained. No compressive strengths substituted for tensile yield; chart-derived values excluded.","organization":"Uddeholm","publication_date":"2019-04","retrieved_date":"2026-09-10","revision":"Snapshot 60cd5fd761dc","sha256":"60cd5fd761dcbb01cbc5f440ae4352f5a81fefdbee7c33775ef657f3454d109c","source_type":"manufacturer_datasheet","title":"Uddeholm Arne technical brochure"},{"id":"uddeholm-rigor","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","notes":"Selected metric physical-property tables and tabulated tensile properties. Heat treatment, hardness, specimen scope and temperatures retained. No compressive strengths substituted for tensile yield; chart-derived values excluded.","organization":"Uddeholm","publication_date":"2019-04","retrieved_date":"2026-09-10","revision":"Snapshot 8035a04cbbcf","sha256":"8035a04cbbcfd9041bf14bdfe9ebb76f9b972cf3d7ddf33b3ecb1952805dc4b6","source_type":"manufacturer_datasheet","title":"Uddeholm Rigor technical brochure"},{"id":"uddeholm-sverker-21","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","notes":"Selected metric physical-property tables and tabulated tensile properties. Heat treatment, hardness, specimen scope and temperatures retained. No compressive strengths substituted for tensile yield; chart-derived values excluded.","organization":"Uddeholm","publication_date":"2019-04","retrieved_date":"2026-09-10","revision":"Snapshot aa11ba6f506f","sha256":"aa11ba6f506f01eadcf96b74a0bb9c2f14b7e620042d9d86e242240c2cf17146","source_type":"manufacturer_datasheet","title":"Uddeholm Sverker 21 technical brochure"},{"id":"uddeholm-orvar-supreme","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","notes":"Selected metric physical-property tables and tabulated tensile properties. Heat treatment, hardness, specimen scope and temperatures retained. No compressive strengths substituted for tensile yield; chart-derived values excluded.","organization":"Uddeholm","publication_date":"2021-06","retrieved_date":"2026-09-10","revision":"Snapshot 2455d6b678ca","sha256":"2455d6b678ca7f86e712794fbaf2b7cb7b15fae3a44d03b3ec0e3164aa2cb597","source_type":"manufacturer_datasheet","title":"Uddeholm Orvar Supreme technical brochure"},{"id":"uddeholm-stavax-esr","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","notes":"Selected metric physical-property tables and tabulated tensile properties. Heat treatment, hardness, specimen scope and temperatures retained. No compressive strengths substituted for tensile yield; chart-derived values excluded.","organization":"Uddeholm","publication_date":"2026-05","retrieved_date":"2026-09-10","revision":"Snapshot 361011f41662","sha256":"361011f416628d6c1aab17530c0cfae0af7e99763d9f7109e6fe7893ac4be41c","source_type":"manufacturer_datasheet","title":"Uddeholm Stavax ESR technical brochure"},{"id":"uddeholm-carmo","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","notes":"Selected metric physical-property tables and tabulated tensile properties. Heat treatment, hardness, specimen scope and temperatures retained. No compressive strengths substituted for tensile yield; chart-derived values excluded.","organization":"Uddeholm","publication_date":"2019-10","retrieved_date":"2026-09-10","revision":"Snapshot 63aa3d327b41","sha256":"63aa3d327b41f7b702afd6da8e8f70ab0e2ee622776efbc4fa6abe0c23665a92","source_type":"manufacturer_datasheet","title":"Uddeholm Carmo technical brochure"},{"id":"uddeholm-caldie","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","notes":"Selected metric physical-property tables and tabulated tensile properties. Heat treatment, hardness, specimen scope and temperatures retained. No compressive strengths substituted for tensile yield; chart-derived values excluded.","organization":"Uddeholm","publication_date":"2022-03","retrieved_date":"2026-09-10","revision":"Snapshot 4559a0bdec46","sha256":"4559a0bdec46f3a411378b232d253b3dd2aa35086dc38438904624b50fa76e69","source_type":"manufacturer_datasheet","title":"Uddeholm Caldie technical brochure"},{"id":"uddeholm-dievar","license":"Publisher copyright retained; selected numerical facts with attribution. Source document not redistributed.","notes":"Selected metric physical-property tables and tabulated tensile properties. Heat treatment, hardness, specimen scope and temperatures retained. No compressive strengths substituted for tensile yield; chart-derived values excluded.","organization":"Uddeholm","publication_date":"2026-09","retrieved_date":"2026-09-10","revision":"Snapshot 5ac4869cfd1d","sha256":"5ac4869cfd1dac6dd199cfb8d6ba71b3f76e5fbd96e8b8ed2df1988a2057ea88","source_type":"manufacturer_datasheet","title":"Uddeholm Dievar technical brochure"},{"id":"hydro-6061-2019","license":"Manufacturer-published datasheet; textual attribution only; source document not redistributed.","notes":"Manufacturer data for 6061 extrusion. Minimum mechanical-property limits and typical physical properties have different statistical meanings and remain distinguished by observation basis. Page 2 rechecked 2026-09-09: alloy-wide density is not temper-specific; thermal conductivity is at 25 °C.","organization":"Hydro","publication_date":"2019-01","retrieved_date":"2026-07-29","revision":"2019/01","sha256":"cc3cc79ef34d7ccd2a69fe5216f726be23d23d0b07e12c2ea1091adbba7fd009","source_type":"manufacturer_datasheet","title":"Alloy 6061"}]}}